Laying HDPE pressurized pipeline for filling village pond Rampura from Km. 5.780/R of Rampura Sub Minor for recharging ground water table and providing irrigation facilities (Ateli Constituency) (Under Atal Bhujal Yojana)

Amount

Credit of old bricks.

Supplying, fixing, jointing, testing and commissioning of DI swing check type reflux (non returned valve) (IVC/VAG make) of P.N. 1.0 having resilient sheet conforming to IS-5312-1986 and amended upto date with pressure release valve arrangement with ISI marked specification including cost of all required material and accessories complete in all respect to the satisfaction of Engineer in Charge. 300 mm i/d

Supplying, fixing, jointing, testing and commissioning of 100 mm i/d Automatic DI Air valve single chamber type consisting two Orifice venting system with 3 functions (Supply and release of air as well as automatic venting during operation) of (IVC/VAG make) as conforming to IS-14845-2000 as amended upto date with ISI mark incluidng drilling, taping, screwing on DI Rising main including supply and fixing 100 mm i/d D.I. pipeline upto height of 3.00 mtr. including all required TandP, supply and fixing of D.I. specials complete in all respect to the satisfaction of Engineer in Charge.

Supply erection, testing and commissioning of Vacuum Ciruit Breaker (VCB) for 11 KV HT Panel having degree of protection not less than IP-42, indoor, metal clad, free floor standing vertical cubicle, deadfront, removal, back cover, facricated with CRCA sheet suitable for 11 KV, 800 A, 3 Phase, 50 Hz, 350 MVA repturing capacity Vacuum Ciruit Breaker (VCBs), Horizontal draw out type spring charger mechanism, 110 V AC Triping coils, indicating lamps, anti pumping contactor, standard multi core terminals, standard wiring and earthing arrangement push buttons, standard paint electrolytic copper busbar mechanical interlocking arrangement indication arrangement closed/ open, spring, charges/ discharged as well as DC trip history tripped/ healthy, cable boxed and all standard fitting and accessories complete in all respect (Including third party inspection from CEIL)

Supply erection, testing and commisioning of equipment on HT metering panel 11 KV consisting of one no G.O switch, one No. Electric Trivector meter 3 phase 4 wire 0.5 class of accuracy on KW hour point Basis complete with HT CTs of 50/5 amp /110 VA burden and class of 0.5 accuracy and H.T.PT 11 KV - 50/5 Amp./ 110V burden and class of 0.5 accuracy including metering panel with complete accessories in all respects specification

`Supply, erection, testing and commissioning of wall mounted electrical Bus Bar panel board, fabricated from 16 SWG CRCA sheet duly stouted with suitable angle iron frame work and completely powder coated of approximate size 900x1200mm with 900mm deep having follwing accessories as below specification. (Bus Bar for 2 Nos. pumping set of 4500 LPM with 55 Mtr. Head) 1. Incomer switch 800 Amp. 2. Copper bus bar chamber of 800 Amp. Capacity. 3. Volt meter 100x100mm range 0 to 500 V (AE/KAPPA/LandT) 4. Indicting Lamp One set 5. Copper Bus Bar (Size 60 mm x 12 mm) 3 Nos.`

Supply, erection, testing of 3 core copper wire with ISI marked for making connection with LT Panel Board to vacuum pump and dewatering pump and other electric appliances with underground system in PVC/flexible pipes/ Cable tray with all required accessories like thimble etc. as directed by Engineer-in-Charge complete in all respect 2.50 mm sq. three core (For Vaccum Pump only)

Supply erection testing and commissioning of Electronic FLOW METER (KRONE Make) with digital display for required size 250 mm i/d complete in all respect

Supply and erection of Horizontal centrifugal spilt casing type pumps conforming to all respect IS 6595-Part-II:1993 of following duties directly coupled to AC squirrel cage induction type electric motor conforming to IS 12615 with accessories complete in all respect (the make shall be of Kirloskar, Crompton, ABB, Siemens, NGFE/ GEC)(Including third party inspection from CEIL) Raw water pumping set of 4500 LPM with 55 mtrs head pump with squirrel cage induction type electric motor of 1440 RPM, 3 phase 50 Hz with efficiancy class IE-3 as directed

Design, supply, installation, testing and commissioning of cubical type L.T. panel suitable for 630 V, 3 phase, 4 wire 50 Hz AC supply system fabricated in compartmentalized design from CRCA sheet steel of 16 SWG thick for frame work and covers, 3 mm thick for gland plates i/c cleaning and finishing complete with 7 tank process for approved shades, having 250 Amp. Capacity extensible type TPN copper Bus bar for high conductivity, DMC/SMC bus bar supports, Panel Manufacturer shall have CPRI test certificate for short circuit with stand capacity of 31 MVA for 1 Sec. bottom based channel of MS section not less than 100 mm x 50 mm x 5 mm thick, entire panel shall have a common tinned copper earth bar of size 25 mm x 5 mm at the rear with 2 Nos. earth stud, solid connections from main bus bar to switch gears with required size of Aluminium bus bar and control wiring with 2.5 sq. mm FRLS insulated copper conductor S/C Cable, Cable alleys, Cable gland plates in two half, i/c providing following switch gears etc. as required. The design and drawing of panel board will be approved from Engineer in-Charge before installation at site. Outgoing for pumping machineries and fully automatic ATS starter with following items: Incomer MCCB 250 Amp. 36 KA Ics 4 pole, complete with spreader links, phase barriers and ROM of make : LandT D Sine, Schneider NSX compact, Siemens 3 VL, Digital Multi Functional Meter with CT of 150/5 Amp. and RYB indicator for phase identification of Make :LandT Vega Series or equivalent in ABB and Siemens, Schneider, Siemens, ABB Outgoing Feeder 1 No. 250 Amp. 36 KA Ics 3 Pole, complete with spreader links, phase barrier and ROM of Make : LandT D Sine. Schneider NSX Compact, Siemens 3VL, for existing feeder (existing load)(Including third party inspection from any Govt. Agency ( as approved by Engineer-In-Charge) make as per Haryana DGSandD rate contract approved manufacturer. i) 1 No. MCCB 250 Amp. 25 KA Ics 3 Pole, complete with spreader links, phase barrier and ROM of Make : LandT D Sine, Schneider NSX Compact, Siemens 3VL. ii) 3 No. Inline contractor for fully automatic ATS starter AC 3x110 Amp. of make MNX 70 of LandT or equivalent in ABB/Siemens. iii) 1 No. fully automatic ATS starter for motor with inside delta connection min 70A for 6 wire Connection Cat No. EMX3-0023B-411 of LandT or Equivalent model 3RW44 of Siemens/PSTB of ABB Note :- Suitable Size of Semiconductor fuse shall be used for Backup protection of fully automatic ATS starter Design, supply, installation, testing and commissioning of APFC Panel of 14.50 KVAR of suitable steps capacity suitable for operation on 415 plus 5% volt, 3 phase, 50 Hz, AC supply having heavy duty static capacitors (Without oil) of suitable rating complete with TP MCCB of 250 Amps. 36 KA (Ics=100%) capacity and 800 A Capacity Bus-bar in continuous with L.T. Panel with adjustable thermal magnetic bases release for over current and short circuit protection as incomer of the panel, of suitable step microprocessor based power factor controller, duty contractors for each capacitors protected with suitable rating MCCBs of minimum 18 KA ICs breaking capacity having thermal magnetic release for over load and short note circuit protection, cooling fans for panel and Digital multifunction meter, Class-1.0, indicating lights, earthing the panel etc. as reqd. The Panel should be manufactured with 2mm thick CRCA sheet duly powder coated etc. The APFC Panel shall be in continuous with L.T. Panel. Makes of Capacitor/ contactor/ MCCB/ APFC Controller : LandT/ Siemens/ ABB (For run the squirrel cage induction electric motor of 1440 rpm 3 phase 50 Hzs of with efficiency class IE-3 to run the raw water pump having discharge 4500 LPM with 55 mtr. Head)(Including third party inspection from CEIL).

Supply, erection, testing of 35 sqmm single core copper wire with ISI marked for making connection with LT Bus Bar and LT Panel Board to electric motor and other electric appliances with underground system in PVC/flexible pipes/ Cable tray with all required accessories like thimble etc. as directed by Engineer-in-Charge complete in all respect

Supplying, fixing, jointing, testing and commissioning of 250mm i/d DI sluice valves (IVC/VAG make) of PN 1.6 having resilient sheet conforming to IS-14846-2000 and amended upto date with ISI marked specification including cost of jointing material complete in all respect to the satisfaction of Engineer in Charge.

Supplying, fixing, jointing, testing and commissioning of 250mm i/d DI swing check type reflux (non returned valve) (IVC/VAG make) of P.N. 1.0 having resilient sheet conforming to IS-5312-1986 and amended upto date with pressure release valve arrangement with ISI marked specification including cost of all required material and accessories complete in all respect to the satisfaction of Engineer in Charge.

Supplying, fixing, jointing, testing and commissioning of 150mm i/d scour/ sluice valve (IVC/VAG Make) of PN 1.6 having resilient sheet conforming to IS-14846-2000 and amended upto date with ISI marked specification (to be Installed on DI Raw Water Rising main) including supply and fixing of 150 mm i/d D.I. pipe of required length and DI specials as required in site condition complete in all respect to the satisfaction of Engineer in Charge.

Supply erection testing and commissioning in HT epoxy type cable box for jointing of cable. Required for complete erecting of the same such as thimble lugs. Solder compound etc. complete in respect to the satisfaction of Engineer-In-Charge. a) For outdoor installation b) For indoor installation

Supply erection, and commissioning of Vaccum Pump 2.00 BHP (Kirloskar Make Model KV 30 32x32 mm 2900 RPM with CI Impeller) with all accessories i.e. 25 mm GI Pipe avg. 30 mtr., Goli Valve 25 mm 2 No. Goli Valve, 15 mm 6 No., Electric Panel 300 ltr. PVC water tank etc. complete in respect to the satisfaction of Engineer-In-Charge.

Supply erection testing and commissioning of Pressure gauge with glistening immersed complete in respect to the satisfaction of Engineer-In-Charge.

Supplying and fixing 250mm i/d CI mechanical dismantling Joints of PN 1.0 with rubber gaskets and nut bolt of required size complete in respect to the satisfaction of Engineer-In-Charge.

Supplying erection and testing of LED Light of 100 watts (Manufactured by reputed make i.e. Phillips/ Bajaj/ Crompton/ G.E./ Wipro) including all required fittings and accessories complete in respect to the satisfaction of Engineer-In-Charge.

Supplying, fixing, jointing, testing and commissioning of 300mm i/d DI sluice valves (IVC/VAG make) of PN 1.6 having resilient sheet conforming to IS-14846-2000 and amended upto date with ISI marked specification including cost of jointing material complete in all respect to the satisfaction of Engineer in Charge.

Providing, lowering, laying, aligning, fixing in position and jointing at all level/ depths ISI marked HDPE pipe of PE-100 grade and PN-8 for water supply as per IS 4984-2016 (amended up to date) in trenches in complete including cost of HDPE Specials, labour, sectional hydro testing (including the cost and conveyance of water to site for testing) and commissioning as per Technical Specifications and as per direction of Engineer. Note: E/w to be measured and paid separately. Rate includes cost of all specials like bends , tees required during laying of pipe line along required alignment. 355 mm outer dia

Bidder Name

Amount

BALAJI IRRITECH PVT. LTD. (GSTN-06AADCB5236F1Z0) BID ID -1211203

M/S LAXMI CONSTRUCTION CO. (GSTN-06AABFL8117G1ZI) BID ID -1214166

jaipal singh s/o sardara singh (GSTN-06BCAPS0242R1ZD) BID ID -1214836

The Sandlana Adarsh Coop. Labour and Construction Society Ltd. (GSTN-NA) BID ID -1213622

PARMIL KUMAR (GSTN-NA) BID ID -1214668

OM PARKASH CONT (GSTN-NA) BID ID -1215115

The Jagrati Co.op. L&C Society Ltd. (GSTN-NA) BID ID -1212970

SHIV TILES UDYOG (GSTN-NA) BID ID -1214762

M/s Balaji Construction Co. (GSTN-NA) BID ID -1214990

Shree Salasar Associates (GSTN-NA) BID ID -1213837

JOGINDER SINGH CONTRACTOR (GSTN-NA) BID ID -1215103

MUKESH KUMAR CONTRACOR (GSTN-NA) BID ID -1214643

DEVENDER SINGH (GSTN-NA) BID ID -1210189

The Sandlana Adarsh Coop. Labour and Construction Society Ltd. (BID ID -1213622)

BALAJI IRRITECH PVT. LTD. (BID ID -1211203)

M/s Balaji Construction Co. (BID ID -1214990)

SHIV TILES UDYOG (BID ID -1214762)

PARMIL KUMAR (BID ID -1214668)

jaipal singh s/o sardara singh (BID ID -1214836)

MUKESH KUMAR CONTRACOR (BID ID -1214643)

DEVENDER SINGH (BID ID -1210189)

M/S LAXMI CONSTRUCTION CO. (BID ID -1214166)

Shree Salasar Associates (BID ID -1213837)

JOGINDER SINGH CONTRACTOR (BID ID -1215103)

OM PARKASH CONT (BID ID -1215115)

M/s Balaji Construction Co. (BID ID -1214990)

SHIV TILES UDYOG (BID ID -1214762)

MUKESH KUMAR CONTRACOR (BID ID -1214643)

DEVENDER SINGH (BID ID -1210189)

jaipal singh s/o sardara singh (BID ID -1214836)

M/S LAXMI CONSTRUCTION CO. (BID ID -1214166)

Shree Salasar Associates (BID ID -1213837)

The Jagrati Co.op. L&C Society Ltd. (BID ID -1212970)

PARMIL KUMAR (BID ID -1214668)

BALAJI IRRITECH PVT. LTD. (BID ID -1211203)

The Sandlana Adarsh Coop. Labour and Construction Society Ltd. (BID ID -1213622)

OM PARKASH CONT (BID ID -1215115)