Nit No. 29/2025-26, Rate Contract of Drilling of 125mm (M S Pipe) Nominal diameter bore hole for Hand Pumps and installation of India Mark-II Hand Pump in Combination Strata complete with material and labour charges in Sub Division Weir of District B

Construction of tube well from ground level & up to 100 mtr depth to accommodate housing and assembly pipe of following sizes in all type of alluvium strata unconsolidated formation such as pebbles, boulders etc. by percussion/rotary drilling method as per IS:2800 Part 1: 1991 and IS:2800 Part II: 1979 (both amended upto date) and technical specifications, with gravel as per IS:4097-1967 and it's packing as per IS: 2800 (Part I & II) 1979 as amended up to date (the work includes the cost of gravel & it's primary packing and packing during development, lowering of housing & strainer assembly pipes with supply and wrapping of coir-rope, wherever necessary for arresting fine sand particles and development work, but excluding the cost of housing and strainer pipe assembly). The work would be completed after obtaining sand free water.

Nominal bore 125 mm dia.

Add 15% extra on above item for drilling depth beyond 100 mtr, If depth of bore is more than 100 mtr.

Construction of Tube Well up to 100 mtr. depth in all type of rocks by DTH system & over burden to accommodate casing pipe of following sizes in all types of soils & over burden including lowering of casing pipes, (if required) excluding cost of casing pipes, as per IS:2800 Part 1: 1991 and IS:2800 Part II: 1979 (both amended upto date) and technical specifications. The work would be completed after obtaining sand free water. The tube well should have a throughout bore as per nominal dia of casing pipe.

Nominal bore 125 mm dia.

Add 15% extra on above item for drilling depth beyond 100 mtr, If depth of bore is more than 100 mtr.

Supply of ERW M.S. black casing pipe ISI marked {IS:1239(Part-1:2004)} medium of following sizes at site of work.

125 mm dia NB( Thickness of pipe 4.8 mm & mass of tube 16.40 Kg/m)

Supply & installation of GI pipe 32 mm medium class “B” with pipe sockets (heavy duty).

Supply and installation of ISI marked India Mark II Hand pump set complete with cylinder & 15 connecting rods.

SSupply and installation of ISI Marked India Mark II Hand pump set Extra-Deep (EDW) complete with cylinder and connecting rods.

EDWHP + 20 Connecting rod.

EDWHP + 23 Connecting rod + 1 Weight.

EDWHP + 26 Connecting rod + 2 Weight.

EDWHP + 30 Connecting rod + 3 Weight.

Supply and installation of ISI mark connecting rod as per departmental specifications of 3 meter length.

Construction of 185 cm. dia platform as per approved design & drawing of UNICEF.

Please Enable Macros to View BoQ information