REPAIR/ PAINTING OF STEEL FURNITURE ITEMS UNDER GE DIPATOLI

Amount

Almirah Steel med (FD 67/1032) S & F following components of Almirah steel med including dismantling unservicable one all as specified and as directed (a) Lock with duplicate keys

(b) Handle 100 mm size chromium plated

(c) 3 way locking device with necessary fittings and painted with one coat of synthetic enamel paint of olive green/smoke Grey shade of approved quality over a coat of primer.

(d) Supply and fix leg made of 1mm thick CRCA sheet duly welded/riveted and painted with one coat of synthetic emamel paint of olive green/smoke Grey shade of approved quality over a coat of primer.

(e) Supply and fix door shutters made of 1mm thick CRCA sheet including chromium plated steel handle 100mm size -01 No, 3 way locking device with lock with duplicate keys- 01 No, key hole and painting with one coat of synthetic enamel paint of olive green/smoke Grey shade of approved quality over a coat of primer both inside and outside after preparation of surface complete all as specified and shown on drawing. (Note for steel painting;- All steel surface shall be done with spray painting)

(f) Supply and fix shelves made of 1mm thick CRCA sheet welded/riveted and painted with one coat of synthetic emamel paint of olive green/smoke Grey shade of approved quality over a coat of primer.

(g) Preparation of old painted steel sufaces by scraping with emary paper, cleaning, dusting and making the surfaces smooth by applying putty wherever required and applying one coat of (spray painting)synthetic enamel paint of olive green/Smoke Grey shade of approved quality both inside and outside including dents/bends and refixing of loose shelves with MS stay hook/revetting/welding as required, complete all as specified and as directed by Engr-in-charge.

Almirah steel large (FD-67/1031/OP) S & F following components of Almirah steel med including dismantling unservicable one all as specified and as directed (a) Lock duplicate keys

(b) Handle 100 mm size chromium plated

(c) 3 way locking device with necessary fittings and painted with one coat of synthetic enamel paint of olive green/smoke Grey shade of approved quality over a coat of primer.

(d) Supply and fix leg made of 1mm thick CRCA sheet duly welded/riveted and painted with one coat of synthetic emamel paint of olive green/smoke Grey shade of approved quality over a coat of primer.

(e) Supply and fix door shutters made of 1mm thick CRCA sheet including chromium plated steel handle 100mm size -01 No, 3 way locking device with lock with duplicate keys- 01 No, key hole and painting with one coat of synthetic enamel paint of olive green/smoke Grey shade of approved quality over a coat of primer both inside and outside after preparation of surface complete all as specified and shown on drawing (Make of Lock-LICO/RINA)

(f) Supply and fix shelves made of 1mm thick CRCA sheet welded/riveted and painted with one coat of synthetic emamel paint of olive green/smoke Grey shade of approved quality over a coat of primer.

(g) Preparation of old painted steel sufaces by scraping with emary paper, cleaning, dusting and making the surfaces smooth by applying putty wherever required and applying one coat of (spray painting)synthetic enamel paint of olive green/Smoke Grey shade of approved quality both inside and outside including dents/bends and refixing of loose shelves with MS stay hook/revetting/welding as required, complete all as specified and as directed by Engr-in-charge.

Locker steel (FD-1029) S & F following components of Locker steel including dismantling unservicable one all as specified and as directed. (a) Handle 100 mm size chromium plated

(b) Hasp & staple 100mm chromium plated

(c) Supply and fix leg made of 1mm thick CRCA sheet duly welded/riveted and painted with one coat of synthetic emamel paint of olive green/smoke Grey shade of approved quality over a coat of primer.

(d) S & F door shutters made of 1mm thick CRCA sheet including chromium plated handle 100mm size -01 No, chromium plated hasp & stapple of approved quality and painting with one coat of synthetic enamel paint of olive green/smoke Grey shade of approved quality over a coat of primer both inside and outside after preparation of surface complete all as specified and as directed.

(e) S & F new curtain rod SS of size 20mm dia of 0.5mm wall thickness of locker steel

(g) Preparation of old painted steel sufaces by scraping with emary paper, cleaning, dusting and making the surfaces smooth by applying putty wherever required and applying one coat of (spray painting)synthetic enamel paint of olive green/Smoke Grey shade of approved quality both inside and outside including dents/bends and refixing of loose shelves with MS stay hook/revetting/welding as required, complete all as specified and as directed.

Locker steel size 1500x530x600 mm S & F following components of Locker steel including dismantling unservicable one all as specified and as directed. (a) Handle 100 mm size chromium plated

(b)Lock duplicate keys

(c) Supply and fix leg made of 1mm thick CRCA sheet duly welded/riveted and painted with one coat of synthetic emamel paint of olive green/smoke Grey shade of approved quality over a coat of primer.

(d) S & F door shutters made of 1mm thick CRCA sheet including chromium plated handle 100mm size -01 No, chromium plated hasp & stapple of approved quality and painting with one coat of synthetic enamel paint of olive green/smoke Grey shade of approved quality over a coat of primer both inside and outside after preparation of surface complete all as specified and as directed.

(e) S & F new bottom drawer duly painted of the locker bedside.

(f) S & F new curtain rod SS of size 20mm dia of 0.5mm wall thickness of locker steel

(g) Preparation of old painted steel sufaces by scraping with emary paper, cleaning, dusting and making the surfaces smooth by applying putty wherever required and applying one coat of (spray painting)synthetic enamel paint of olive green/Smoke Grey shade of approved quality both inside and outside including dents/bends and refixing of loose shelves with MS stay hook/revetting/welding as required, complete all as specified and as directed by Engr-in-charge.

Table dining 900x 900 mm steel (FD-1009) S & F following components of Table dinning 900x900 mm steel including dismantling unservicable one all as specified and as directed. (a) Leg/Top rail 25 x 25 x 1.6mm thick MS squire pipe duly welded to the frame including minor repairs to the table and painting the replaced portion.

(b) Supply and fixing new H type stiffener for jointing legs of 25mm square conduit pipe of 1.6mm wall thickness shall be welded to support the legs of the table at appropriate height approx 100mm high from the bottom of legs as directed.

(c) Table top shall be made up of 18/19mm thick Comm plywood MR Gde pasted with 0.8mm thick sunmica on one side of approved shade including provision of 4mm thick teakwood beading all around.

(d) Preparation of the old painted steel surfaces by scraping with emery paper, joint welding if required, cleaning and applying one coat of synthetic enamel paint of olive green shade of approved quality.

(e) PVC shoe

Table office officer/clerk steel (FD-84/1003,1004 ) S & F following components of Table office/clerk steel including dismantling unservicable one all as specified and as directed. (a) Drawer made of 1mm CRCA sheet including painting with synthetic enamel paint of olive green/smoke Grey shade of approved quality over a coat of primer both inside and outside including preparation of surfaces and repairing inter locking system and providing new lock 6 lever to top drawer.

(b) Leg/stiffener 25 x 25 x 1.6mm thick MS square pipe duly welded to the frame and painted with one coat of synthetic enamel paint over a coat of primer.

(c) Lock with duplicate keys

(d) Complete box comprising of 03 drawers made of 1mm CRCA sheet including locking arrangement/accessories and painting with synthetic enamel paint of olive green shade of approved quality over a coat of primer/putty ofTable office Officer/Clerk Steel.

(e)Table top shall be made up of 18/19mm thick Comm plywood MR Gde pasted with 0.8mm thick sunmica on one side of approved shade including provision of 4mm thick teakwood beading all around complete of Table office Officer Steel

(f))Table top shall be made up of 18/19mm thick Comm plywood MR Gde pasted with 0.8mm thick sunmica on one side of approved shade including provision of 4mm thick teakwood beading all around complete of Table Office Clerk Steel

(g) PVC shoe

(h) Preparation of old painted steel sufaces by scraping with emary paper and welding as reqiured cleaning, dedusting and making the surfaces smooth by applying putty/red oxide primer wherever required and applying one coat of synthetic enamel paint of olive green/Smoke Grey shade of approved quality both inside and outside complete all as specified and as directed for Table office officer steel.

(j) Preparation of old painted steel sufaces by scraping with emary paper and welding as required cleaning, dedusting and making the surfaces smooth by applying putty/red oxide primer wherever required and applying one coat of synthetic enamel paint of olive green/Smoke Grey shade of approved quality both inside and outside complete all as specified and as directed for Table office clerk Steel.

Chair steel tubular with/ without arms (FD-75 M) S & F following components of Chair steel tubular with/ without arms made out of shisham wood french polished duly plastic canned in 'Godrej' pattern with plastic cane 2mm width and borders with 4mm wide plastic cane fixed with screws 4 Nos and nuts to the chair frame complete all as per drawing. including dismantling unservicable one all as specified and as directed. (a) Seat frame

(b) Back frame

(c) Handle made of shisham wood duly french polished and fixed to the chair tubular with arms with screws of suitable size.

(d) MS Flat size 25 x 25 x 4mm thick welded at corner at bottom of the seat only to support and screwed with the seat .

(e) Preparation of surfaces and painting with synthetic enamel paint OG colour to chair steel tubular with/without arms including 4 Nos of PVC bushes to the bottom of the chair frame and 2 Nos of PVC caps on the top of the frame.

Table Dining 1520 x 860 x 760mm Steel (ORs) Removing of old unserrviceable top of table1520x860x760 mm and S & F new top shall be made up of 18/19mm thick Comm plywood MR Gde pasted with 0.8mm thick sunmica on one side of approved shade including provision of 4mm thick teakwood beading all around.

Preparation of old painted steel sufaces of table1520x860x760mm steel by scraping with emery paper, cleaning, dusting, joint welding if required and making the surfaces smooth and applying two coats of olive green synthetic enamel paint including fixing of four Nos of PVC shoes to each leg.

Chair Verandah(FD-256)- (a) M&L for electric welding to broken old frame of chair verandah including preparation of surface and removing the unwanted welding spot all as directed.

(b)Preparation of steel tubular frame surfaces with emery paper and applying two coat of synthetic enamel paint of white colour of approved quality and recaning the chair fully both seat and back with new plastic cane, white, half round of size 4mm wide including providing new suitable 04 Nos PVC shoes to the each leg of approved quality.

Teapoy Varandah (FD-255/383)Preparation of old painted steel sufaces by scraping with emery paper, cleaning, dusting, joint welding if required and making the surfaces smooth and applying two coat of white synthetic enamel paint including four Nos PVC shoes.

(b) Removing old U/s table top and S/F top shall be made up of 18/19mm thick Comm plywood MR Gde pasted with 0.8mm thick sunmica on one side of approved shade including provision of 4mm thick teakwood beading all around.

Shoe Rack steel (MAP) -(a) Supply and fixing of main frame(both side) of shoe rack steel which is made out with 25mm round pipe wall thickness 1.6mm as shown in drg.

(b) Supply and fixing of 19mm dia ms pipe of 18 gauge with Jaliframe of shoe rack steel which is made out with 3mm thick ms rod as shown in drg.

(c ) Preparation of the old painted steel surfaces by scraping with emery paper and welding as required, cleaning and applying one coat of synthetic enamel paint of black shade of approved quality including providing new suitable 04 Nos PVC shoes to the each leg of approved quality.

Y P ANAND