REPAIR MAINT OF SMALL FIRING RANGE AND CIVIL WORK AT AF STN SINGARSI UNDER AGE I AF SINGARSI

Amount

Rough excavation not exceeding 1.50 metre deep and getting out soft and loose soil,complete all as specified and as directed.

Rough excavation exceeding 1.50 metre but not exceeding 3.00 metre deep and getting out soft and loose soil,complete all as specified and as directed.

supply only fine sand.

M&L for Removing excavated material not exceeding 50.00 metre and deposited where directed for screening,complete all as specified and as directed.

M&L for Screening sand with Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm on the site including removing large screened materials out side the range site,complete all as specified and as directed.

Supply only sawdust and mixing of saw dust with screened sand,complete all as specified and as directed.

M&L for Removing mixed screened sand and saw dust/material not exceeding 50.00 metre and deposited where directed,complete all as specified.

M&L for Spreading and levelling mixed screen sand and saw dust in layers not 25 cm thick(Saw dust will be measured and paid seperately),complete all as specified and as directed.

Excavating in trenches, not exceeding 1.50 metre wide and not exceeding 1.50 metre in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. not exceeding 10 sqm on plan and not exceeding 1.50 metre in depth and getting out,complete all as specified and as directed.

M&L for Preparation old steel surfaces of any description not otherwise described over 10cm in width or girth and applying one coat of synthetic enamel paint etc, complete all as specified and directed by Engineer-in-Charge.

Rough excavation not exceeding 1.50 metre deep and getting out hard and dense soil,complete all as specified and as directed.

M&L for Removing excavated material not exceeding 150.00 metre and deposited where directed for screening,complete all as specified and as directed.

M&L for Preparation of old plastered or unplastered surfaces of walls including cornices, pillasters by brooming down or steel wire smoke, root, moulds, moss and efforescent salts, and trading oil and greasy spot by using suitable chemical & removing nails, making good holes with chalk whiting, filling cracks and brooming to remove all dirt etc and applying one coat of Cement based paint on old prepared surfaces of walls,complete all as specified and directed by Engineer-in-Charge.

M/S Subhadip Enterprise (BID ID -3328450)

M/S AMARNATH AGARWALLA (BID ID -3326445)

M/S KUMAR AVINASH (BID ID -3326934)

M/S MBS TRADING CO (BID ID -3324089)

M/S SINGH ENTERPRISE (BID ID -3331040)

P .BANERJEE AND CO (BID ID -3327281)

M/S New Builders Corporation (BID ID -3323758)