CERTAIN REPAIR TO JOINERY, TILING, PLUMBING AND ALLIED SERVICES FOR MD ACCN AT BHARATPUR LINE IN MIL STN DHARAMSHALA

Amount

Demolition of cement concrete (unreinforced) in ground floor and paving n.exc 15 cm thick above or below ground level complete and disposal of unserviceable material, debris and rubbish to a distance not exceeding 100m complete all as specified and directed.

Demolition of Cement concrete (unreinforced) of any description and in any position not otherwise specifically provided complete and disposal of unserviceable material, debris and rubbish to a distance not exceeding 100m complete all as specified and directed..

Demolition of brick work or stonework built in cement mortar including all quoins, arches pillars etc but excluding ashlar facings ,dressed stonework and precast concrete articles and stacking the serviceable materials within 100m and disposal of unserviceable material, debris and rubbish to a distance not exceeding 100m complete all as specified and directed.

Taking down cement plaster including backing etc from brick/stone walls / concrete surfaces including raking out joints, hacking for key , scrubbing down with water etc complete all as specified and directed

Taking down cement plaster/terrazo dado/wall tiling and skirting. etc on brick or stone walls etc including racking out joints hacking for key and scrubbing down with water etc

Taking down and removing chowkats with shutters (without taking off shutters from chowkat) not exceeding 1.50 Sqm each complete all as specified and directed.

Taking down and removing chowkats with shutters (without taking off shutters from chowkat) exc 1.50 Sqm but not exc 4.00 Sqm each complete all as specified and directed. .

Taking down shutter of any description exc 1 sqm but not exc 2 sqm each complete all as specified and directed.

Taking down shutter of any description not exc 1 sqm complete all as specified and directed.

Taking down shutter of any description exc 1 sqm and n.exc 2 Sqm each and refixing in same opening after easing and adjusting complete all as specified and directed.

Taking down steel water tubing 15 mm bore including all fitting and connections complete all as specified and directed.

Demolition of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed.

Dismantling plain or corrugated steel sheets any gauge thickness including Nanital or similar pattern roof covering including ridges complete all as specified and directed.

Dismantling timber in scantling 40 sqcm and over in section framed work complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for as specified and directed.

Taking down rain water pipe and eaves gutters (any size and pattern) including all fittings heads shoes bends swan necks etc

Brick work with old size fly ash bricks, straight or curved on plan exc. 6 metre mean radius built in cement mortar 1:6 all as specified & directed.

M-15 nominal mix concrete type C-0 (1:3:6) using 12.5mm graded aggregate as in steel door frames complete all as specified and directed.

Pressed steel frame using 1.25 mm thick PBI sheet (size of frame 105 x 60 mm) for doors with one or more rebates including necessary fixing lugs, hinges, lock/ strike plate etc and filling with PCC 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregates) as in back of chowkats complete all as specified.

Pressed steel frame using 1.25 mm thick PBI sheet (size of frame 125 x 60 mm) for doors with one or more rebates including necessary fixing lugs, hinges, lock/ strike plate etc and filling with PCC 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregates) as in back of chowkats complete all as specified.

35mm thick second class hardwood (Sal/Hollock) factory made plain framed panelled shutter (two panel) with lock rails & panel of 9 mm B.W.P commercial ply wood or 12 mm thick veneered particle board with commercial veneering on both side. The size of rail and stile as per IS:1003 (Part-I) kiln seasoned and chemically pressure treated complete all as specified and directed.

35 mm thick 2nd class hard wood (Sal/Hollock) glazed & skeleton factory made shutters, open rebated and prepared to receive glass, gauze etc (without sash bars), edges of framing plain, chamfered or rounded fitted with cut and mitered beads for securing glass, etc, sizes of members of door shutters as specified in SSR- 2009 Part-I Section 8.24(a) complete all as specified and directed.

Continuous (piano) hinges, mild steel, bright finish or electrogalvanised width of flap 30mm including necessary welding if required complete all as specified and directed.

100 mm in size hasp and staple aluminium anodised, wire type stone enameled black including bolt to hinge plate and fixed with screws complete all as specified and directed.

Galvanished mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanished wire staples complete all as specified and directed.

Sheet glass, 3mm thick ordinary quality and glazing with oil putty in squares n.exc 0.5 sqm each pane complete all as specified and directed.

4mm thick, figured glass pin head type and glazing with oil putty in squares n.exc 0.5 sqm each pane complete all as specified and directed.

False ceiling using anodised aluminium T&L sections, snap grid frame work of size 605 x 605mm including hangers 6mm dia GI (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40 x 3mm size 60mm long complete with 4mm thick non-asbestos fibre cement board ISI marked Eboard colour coated and designed, complete all as specified.

4mm thick non asbestos fibre cement building board fixed in ceiling fixed or laid/ inserted to timber/GI/Aluminium framework with screws complete all as specified & directed.

S & F 18/19 mm Prelaminated particle board, interior grade, prelaminated one side with decorative chice lamination & other side balancing white lamination ,fixed with screws to timber frame work incl 5 mm thick teak wood leaping surrounding edges complete all as specified and directed.

Steel windows with side hung shutters inclduing projecting type hinges with steel handle and steel peg stay complete with glazings bards devetailed or welded all as specified and directed by Engr in Charge.

Steel ventilators with centre hung shutter including two pairs of brass cup pivoted catch spring and pulley wheel complete all as specified and directed by Engr in Charge.

2nd class hardwood plain solid, straight , chokhats & frames, wrought framed rebated on the solid, rounded or chamfered , put togther with glue pinned to joints, supplied and fixed complete all as specified

Solid PVC frame (Single Rebated) of size 60mm x 30mm made out of solid PVC foam with homogenous fine cellular structure having smooth outer integral skin with suitable metal stiffner and fixed with 100 x 8 sheet metal CSK screws complete as shown on page No 176 to 183 of MES SSR 2020 Part-II compete all as specified and directed. (Note :- Door frame shall be water proof, termite proof, elegant and should have excellent screws holding strength to fix hinges and hold doors properly for a long life)

Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails.M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and Plain colour PVC sheet for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the M.S. frame welded/ sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, suppling & fixing in the frame at site, as per specification compete all as specified and directed.

Aluminium, anodised, barrel tower bolts of extruded section and fixed with 150mm long bolt.

Butt hinges, medium weight, cold rolled, mild steel 100mm long, all as specified.

Anodized aluminium alloy handles, fabricated type, anodised of sized 150mm, complete all as specified.

300mm long anodised aluminium alloy sliding door bolt, bolt type, stove enamelled black, with bright bolt not less 16mm dia, with and including a minimum of 6 bolts and nuts, 4 on bolt plate and 2 on stapple plate, 300mm long, all as specified.

2nd class hard wood as in scantling, framed work as in ceiling, clean swan timber and fixed in any position complete all as specified.

0.63 mm thick, galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with with L-type or J-type or cranked hook bolts , in roofs, walls etc. with grade of zinc coating 275 gms per sqm complete all as specified and directed.

All as per item no 42 above but except sheeting

0.63 mm thick, galvanised, plain mild steel sheeting as in ridges, hipe, valley gutters, drip and straight flashing (length and girth as fixed) with grade of zinc coating 275 gms per sqm complete all as specified and directed.

All as per item no 44 above but except sheeting

2nd class hardwood plain fillets sectional area exc. 3 Sqcm and n.exc. 6 Sqcm, square, rectangular or triangular in section, clean sawn, secured with nails of brads complete all as specified and directed.

25 mm thick PCC 1:2:4 type B-1 (using 20 mm graded crushed stone aggregates) as in floor finish, surface finished even and fair to receive top finish complete all as specified and directed.

100mm thick PCC 1:3:6 type C-2 (using 40 mm graded crushed stone aggregates) as in sub base complete all as specified and directed.

PCC 1:5:10, type E-2 as in filling of sunken floors etc complete all as specified and directed.

Plain cement concrete 1:3:6, nominal mix, type C-1, using 20mm graded mechanically crushed stone aggregate, 75mm thick as in plinth protection etc., surface finished even and smooth without using extra cement and laid to a slope of 1 in 24 in alternate panels n.exc. 1.20 Sqm each, 12mm wide and 5 cms deep joints shall be formed between the bays and shall be filled with mastic filling comprising a mixture of one part of heated blown bitumen and two parts of heated coarse sand (by volume), all as specified. Note:- The unit rate include for use of form work (straight or curved).

Chequered cement concrete coloured tiles, homogenious texture glossy finished , chemically coated machine pressed 20 cm x 20cm x 25mm thick set, jointed and pointed in near cement slurry in floor with gray cement and pigment and including 15 mm thick cement screed in cement mortar 1:4 complete all as specified and directed. Shade/Colour of tile shall be approved by the GE.

(Non skid), preminium class I grade, coloured ceramic tiles, 7 to 8mm thick (square/rectangular) area of each tile ex. 0.06 Sqm but not exc. 0.11 Sqm, in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and including 15mm thick screed bedding layer in cement mortar 1:6 complete, all as specified.

(Non skid), premium class I grade, coloured ceramic tiles, 7 to 8mm thick (square/rectangular) area of each tile exc. 0.18 Sqm but not exc. 0.38 Sqm, in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and including 15mm thick screed bedding layer in cement mortar 1:6 complete, all as specified.

Non skid ceramic coloured tiles of 7 to 8 mm thick (square/rectangular) area of each tile exc 0.18 sqm but n.exc 0.38 sqm on vertical surfaces such as skirtings/dado etc., set and jointed in neat cement slurry and pointed with white or coloured cement, laid over and including 10mm thick bedding laye

Glazed ceramic coloured tiles of size 450mm x 300 mm x 7mm thick as in vertical surfaces , set and jointed in neat cement slurry and pointed with white or coloured cement to match the shade of tile over and including 10 mm thick cement screed in cement mortar 1:4 including taking down existing tile complete all as specified and directed. Shade/Colour of tile shall be approved by the GE.

Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid over 15mm screed bed in CM 1:6 and jointed with grey cement slurry mixed with pigment to match the shade of the slab incl rubbing and polishing complete

All as per item No 56 above but on vertical surfaces over 10 mm thick plastering in cement mortor1:4

Marble work (Udaipur green slabs) 18 to 20mm thick (table rubbed and polished) as in cooking platforms and like in cement mortar (1:4) in pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade all as specified

Rendering cement plaster 15mm thick in cement mortar 1:4 on stone masonry or surface other than fair faces of brick wall or on concrete surfaces, surface finished even and smooth without using extra cement, all as specified.

Rendering 20mm thick on fair faces of brick work or concrete surfaces in CM 1:6 and finishing the surface even and fair without using extra cement all as specified.

20mm thick plaster in CM 1:4 finished even and smooth mixed with water proofing compound (water proofing compound shall be measured separately) all as specified.

Rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1:4 and finishing the surface even and fair without using extra cement complete all as specified and directed by Engineer in charge.

rendering 10 mm thick on fair faces of brick or concrete surfaces in CM 1:3 as on ceiling, facia roof projectio etc finished even and smooth without using extra cement as directed by Engineer-in-Charge.

Supply only Liquid water proofing compound all as specified

Two coats of white wash on newly plastered surface of walls/wind band etc. including prepation of surfaces complete, all as specified.

Two coats of white wash on newly plastered surface of ceiling including prepation of surfaces complete, all as specified.

PCC (1:2:4) type B-1 using 20 mm graded stone agg as in coping, benching cills, pcc gola,roof kerbs and the like including weathering sliglitely rounded or chamfered on edges directed mixed with water proofing compound (water proofing compound shall be measured separately) complete, all as specified.

Preparation of wooden surfaces of any description, not otherwise described, over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

Preparing surfaces of wood and wood based materials, new or old, of any description and girth, not otherwise described and treated with creosote oil all as specified and directed.

Preparation of old plastered or un plastered, previously undecorated wall surfaces and applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed.

Preparation of old plastered or unplastered surfaces of walls and applying two coats of oil bound distemper over and including a coat of 2 mm thick wall care putty complete, all as specified and as directed by Engr-in-Charge

G I tubing medium grade of 15 mm bore with all fittings and fixtures fixed to wall and ceiling or laid in floor/trenches complete all as specified and directed.

Refixing only old GI tubing 15 mm bore pipe and connections in new or old position as on walls ceiling floors etc all as specified.

25mm dia fancy type PVC coated on MS pipe coloured curtain rod with brackets and knobs at both ends as per site requirement including taking down old existing PVC conduit pipes with accessories complete all aspecified

Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth complete all as specified.

S&F Glass/PTMT shelf with CP railing fancy type complete all as specified.

S&F Glass/PTMT corner shelf with CP railing fancy type complete all as specified.

Walling of random rubble stone masonry, brought upto coursed, well bonded, bedded and soilidly hearted, built in CM 1:6, complete all as specified and directed.

All as per srl item no 78 above but except stone.

Vitreous China wash basin, angle back, size 600x480mm white, including cutting for and pinning in ends of brackets or erecting stand including 15mm pillar taps, with 32mm chromium plated waste coupling, waste pipe of bore 32mm, PVC connection pipe 450mm long with brass nuts on both side, fixed in repairs, including bracket,s completed all as specifie.

Vitreous Chinaware squatting pan, ‘Orrisa pattern’ size 580 mm x 440 mm, white, with Cast iron ‘P’ or ‘S’ trap, front or back inlet, integral footrest complete all as specified, excluding flushing cistern and flush pipe), etc and making good to floors in repair, all as specified.

Vitreous china wash down water closet pan (pedestal pattern), white and trap including connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe etc seat and cover for pedestal pan , Health faucet (ABS body) mild steel chromium plated suitable for 15mm dia pipe with 1.25 mtr long flexible tube and ABS wall hook including making connections and fixed in posisition complete in all respect all as specified and directed.

PVC valve less, crystal white, syphonic action type flushing cistern 10 liter capacity, superior quality, plunger type, low level, with inlet, ball valve, float and handle, 32mm dia PVC long bend flush pipe 90cm long and 15mm dia 450 mm ling PVC connection with CP brass coupling nuts and PVC washers at bothy ends fixed, in repairs, all as specified.

15mm bore Bip taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed down, screwed for iron pipe or for brass ferrule fancy type chromium plated and fixed in repairs.

15 mm bore CP brass stop valve cast copper alloy screwed down high pressure with crutch butter fly handle screwed both ends for iron pipe or for unions and fixed all as specified

Brass chromium plated shower rose 125 mm of size with arme and with or without swivel joints to steel pipe or union complete all as specified and as directed

15 mm dia bore CP brass stop valves cast copper alloy (concealed type) complete all as specified and as directed.

stainless steel sink with drainage board made of stainless steel of 1mm thick kitchen sink of size 915 x 460mm boul size of 410 x 330 x 160mm with coupling ,waste pipe and bracket complete as as specified.

Mild steel work as in wind ties for roof including securing bolts, posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc., flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting etc., and similar work comforming to Fe-290 Gde E-165 complete as as specified.

600x450 mm bevelled edge mirror of slected quality glass, mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plug with chromium plated brass screwed and cup washers.

CP soap tray fixed to walls with rubber plugs complete all as specified and directed.

S&F in repair PVC (SWR) pipes 75 mm dia single socketed, in any length with rubber ring joints,fixed on walls with stack clamps made out of 10 mm by 3 mm flat iron and 06mm dia round iron stays, including bolts and nuts and securing ends of stays to walls all as specified and directed.

S&F in repair PVC (SWR) pipes 75 mm dia single socketed, in any length with rubber ring joints, laid in floor or in trench all as specified and directed.

S&F in repair 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints,fixed to walls complete all as specified.

S&F in repair 75mm bore PVC (SWR) bends of any radius complete all as specified.

S&F in repair 110mm bore PVC (SWR) bends of any radius complete all as specified.

PVC reducer 110 x 75mm dia complete all as specified.

75mm dia of PVC (SWR) floor trap with grating incluing jointing to waste pipe fixed in cement concrete 1:2:4 type B-1 in repair complete all as specified.

Dismantling water tanks and removing to store exc 250 & not exc 500 ltr capacity complete all as specified.

Rotational moulded polyethylene water storage tank 500 Ltrs capacity four layered (ISI Marked) cylinderical vertical with closed top, hoisted and fixed in position with ball brass valve, high pressure with PVC float valve 20mm dia with polythene float and fly nut, tank nipples with check nuts and washers complete and making connections with existing water supply line including taking down old tank any type complete all as specified.

20 mm dia, ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed in repair complete all as specified and directed. (Minimum weight 210gms)

S&F gun metal gate valves with iron wheel head 20mm complete all as specified.

Deduct Credit Amount as per Schedule of credit as details given on Srl Page No 25 of tender doucments.

SAFFRON CONSTRUCTION CO. (BID ID -3077999)

Krithvik Electricals (BID ID -3075090)

Eshaan Construction Co. (BID ID -3079597)

M/S MADAN GOPAL and CO (BID ID -3078246)