Construction of Pre-School Building including Multipurpose Area (Happy Blossom Play School) at CBI Colony, Vasant Vihar, New Delhi under CSR initiativ

NAME OF WORK : Construction of Pre-School Building including Multipurpose Area (Happy Blossom Play School) at

CBI Colony, Vasant Vihar, New Delhi under CSR initiative.

S.No. Description of Items Unit. Qty Rate Amount

1.00 SUB-HEAD : I : EARTH WORK :-

1.1 Earth work in excavation by mechanical means (Hydraulic excavator) / manual

means over areas (exceeding 30cm in depth. 1.5m in width as well as 10 sqm on

plan) including disposal of excavated earth, lead upto 50m and lift upto 1.5m, disposed

earth to be levelled and neatly dressed.

a) All kinds of soil . Cum 410.0 135.74 55654.68

1.2 Extra for every additional lift of 1.5 m or part thereof in excavation banking excavated or

stacked materials.

All kinds of soil Cum 230 96.97 22303.17

1.3 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations

etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by

ramming and watering, lead up to 50 m & lift upto 1.5 m. Cum 137.0 149.89 20535.07

1.4 Excavating trenches by mechinical/ manual means of required width for pipes, cables, etc

including excavation for sockets, and dressing of sides, ramming of bottoms, for all

depth, including getting out the excavated soil, and then returning the soil as required,

in layers not exceeding 20 em in depth, including consolidating each deposited layer

by ramming, watering, etc.and disposing of surplus excavated soil as directed, within a

All kinds of soil

a) Pipes, cables etc, not exceeding 80 mm dia. metre 10 164.88 1648.80

b) Pipes, cables etc. exceeding 80 mm dia. but

not exceeding 300 mm dia metre 15 269.3067125 4039.60

PRE- CONSTRUCTION ANTI-TERMITE TREATMENT WORKS

Providing Pre-constructional anti- termite treatment and creating a chemical barrier to the

building by injecting chemical emulsion of required concentrations under grade slab and

Grade beam, alround the footings, column pits, trenches, pits, tunnels, wall trenches, back fill,

plinth filling. junction of wall and floor, Retaining I side walls of basement floor, external

perimeter of building. surrounding of pipes, expansion joints, below UG sump and Retaining I

side walls etc.as per instructions of chemical manufacturer and all as directed. The treatment sqm 200 53.5325 10706.50

shall be carried out strictly in accordance with the technical specification and conforming to IS

6313 or equivalent BS specification. The chemical to be used as insecticides for the

treatment shall be 50% EC (Imdachloropid 30.5 SC)and the application shall be dilute one part

of chemical 50% EC with 49 parts of water to get 1% emulsion and strictly in

accordance with the manufacturer's specification, as specified by consultants appointed by

the contractor.

Sub Total I 114887.82

2.00 SUB-HEAD : II : CONCRETE WORK :-

2.1 Providing and laying in position ready mixed or site batched design mix

cementconcreteforplaincement concrete work; using coarseaggregate and fine aggregate

derived from natural sources, Portland Pozzolana/ Ordinary Portland /Portland Slag

cement, admixtures in recommended proportions as per IS: 9103 to accelerate I retard

setting of concrete,to improve durability and workability without impairing strength;

including pumping of concrete to site of laying, curing, carriage for all leads; but

excluding the cost of centering, shuttering and finishing as per direction of the engineer-

in-charge; for the following grades of concrete.

Note:Extra cement up to 10% ofthe minimum specified cement content in design mix

shall be payable separately. In case the cement content in design mix is more than 110%

of the minimum specified cement content, the contractor shall have discretion to either re-

design the mix or bear the cost of extra cement.

All works upto plinth level

2.1.1 M-10 grade plain cement concrete (cement content considered @ 220 kg/cum) cum 59.00 6756.68 398644.18

2.2 Making plinth protection 50 mm thick of cement concrete 1:3:6 (1 cement : 3

coarse sand (zone-Ill) derived from natural sources : 6 graded stone aggregate 20 mm

nominal size derived from natural sources) over 75 mm thick bed of dry brick ballast 40

mm nominal size, well rammed and consolidated and grouted with fine sand, including

necessary excavation,levelling & dressing & finishing the top smooth.

Sub Total II 419273.16

3.00 SUB-HEAD : III : REINFORCEMENT CEMENT CONCRETE :-

Digitally signed by RAJ PAL

S.No. Description of Items Unit. Qty Rate Amount

3.1 Centring and shuttering including strutting,propping etc. and removal of form for:

a) Foundation ,footing,bases of columns ,etc. for mass concrete. sqm 55 299.90 16494.32

b) Walls (any thickness) including attached pilasters, butteresses, plinth and string courses

c) Suspended floors,roofs,landings,balconies and access platform. sqm 160 709.11 113458.31

d) Lintels, beams, plinth beams, girders, bressuners and cantilevers. sqm 88 563.16 49558.25

e) Columns,Pillars,Piers,Abutments,Posts and struts. sqm 110 735.15 80866.96

g) Edges of slab and breaks in floors and walls 0.00 0.00

Under 20cm wide. metre 60 159.49 9569.32

h) Weather shade,chajjas,corbels etc., including edges. sqm 5 727.35 3636.77

3.2 Providing and laying reinforced cement concrete in kerbs, steps and the like at or near

ground level excluding the cost of centering, shuttering, finishing and reinforcement with

1:1.5:3 (1 cement : 1.5 coarse sand (zone-Ill) derived from natural sources : 3 graded

stone aggregate 20 mm nominal size derived from natural sources 6746.36 13492.71

3.3 Providing, hoisting and fixing above plinth level up to floor five level precast reinforced

cement concrete work in string courses, bands, copings, bed plates, anchor blocks, plain

window sills and the like, including the cost of required centering, shuttering but

excluding cost of reinforcement with 1:1.5:3 (1 cement:1.5 coarse sand(zone-111)

derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from

natural sources). 8095.57 24286.70

3.4 Steel reinforcement for R.C.C. work including straightening, cutting, bending,placing

in position and binding all complete upto plinth level. 0.00 0.00

a) Upto plinth Level 0.00 0.00

Thermo-Mechanically Treated bars of grade Fe-500D or more. Kg 5325 82.48 439196.88

3.5 Steel reinforcement for R.C.C. work including straightening, cutting, bending,placing

in position and binding all complete above plinth level. 0.00 0.00

Thermo-Mechanically Treated bars of grade Fe-500D or more. Kg 6750 82.48 556728.44

3.6 Providing and laying in position ready mixed or site batched design mix cement concrete

for reinforced cement concrete work; using coarse aggregate and fine aggregate derived

from natural sources, Portland Pozzolana I Ordinary Portland /Portland Slag cement,

admixtures in recommended proportions as per IS: 9103 to accelerate I retard setting of

concrete, to improve durability and workability without impairing strength;including

pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost

of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-

charge, for the following grades of concrete.:

Note: Extra cement up to 10% of the minimum specified cement content in design mix

shall be payable separately. In case the cement content in design mix is more than 110%

ofthe specified minimum cement content, the contractor shall have discretion to either re-

design the mix or bear the cost of extra cement. 0.00 0.00

a) All works upto plinth level : Concrete of M25 grade with minimum cement content of

b) All works above plinth level upto floor V level : Concrete of M25 grade with minimum

cement content of 330 kg /cum 7540.74 339333.34

Sub Total III 0.00 2191697.37

4.00 SUB-HEAD : IV : BRICK WORK :- 0.00

4.1 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5

in foundation and plinth in: 0.00

a) Cement mortar 1:6 (1 cement : 6 coarse sand) cum 24.00 5454.39 130905.32

4.2 Brick work with common burnt clay F.P.S. (non modular) bricks of class

designation 7.5 in superstructure above plinth level up to floor V levelin

all shapes and sizes in: 0.00 0.00

Cement mortar 1:4 (1 cement : 4 coarse sand) cum 75 7146.09 535956.87

4.3 Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class

designation 7.5 in superstructure above plinth level up to floor 0.00 0.00

Vlevel. mortar 1:4 (1 cement : 4 coarse sand)

Digitally signed by RAJ PAL

S.No. Description of Items Unit. Qty Rate Amount

4.4 Extra for providing and placing in position 2 Nos 6 mm dia. M.S. bars at every third

course of half brick masonry. 80.15 6331.52

Sub Total IV 0.00 741088.37

5.00 SUB-HEAD: V: MARBLE WORK:- 0.00

5.1 Providing and fixing 18 mm thick gang saw cut, mirror polished,premoulded and

prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias,

seats and similar locations of required size, approved shade, colour and texture laid over

20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white

cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing,

moulding and polishing to edges to give high gloss finish etc. complete at all levels.

Polished Granite stone slab 0.00

a) Area of slab upto 0.50sqm. sqm 14.00 2611.47 36560.56

5.2 Extra for providing opening of required size & shape for wash basin/ kitchen sink in

kitchen platform, vanity counter and similar location in marble/Granite/stone work,

including necessary holes for pillar taps etc. including moulding, rubbing and polishing

of cut edges etc. complete. each 1.00 748.46 748.46

Sub Total V 0.00 37309.02

6.00 SUB-HEAD: VI: WOOD WORK:- 0.00

6.1 Providing and fixing factory made single extruded WPC (Wood Polymer Composite)

solid door/window/Clerestory windows & other Frames/ Chowkhat comprising of virgin

PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers

(wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index

of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and

screwed with full body threaded star headed SS screws having minimum frame density of

750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum

compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to

spread of flame of Class A category with property of being termite/borer proof,

water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS

dash fasteners of required dia and length complete as per direction of Engineer-In-

Charge. (M.S hold fast/lugs or SS dash fasteners shall be paid for separately).

Note: For WPC solid door/window frames, minus 5 mm tolerance in dimensions i.e

depth and width of profile shall be acceptable. Variation in profile dimensions on plus

side shall be acceptable but no extra payment on this account shall be made.

Frame size 45 x 85 mm metre 60.00 708.43 42505.57

6.2 Providing and fixing carbon steel galvanised ( minimum coating 5 micron) dash fastener

of 10 mm dia double threaded 6.8 grade (yield strength 480 N/mm2), counter sunk head,

comprising of 10 m dia polyamide PA 6 grade sleeve, including drilling of hole in frame

, concrete/ masonry, etc. as per direction of Engineer-in-charge.

6.3 Providing and fixing factory made single extruded WPC (Wood Polymer Composite)

solid plain flush door shutter of required size comprising of virgin polymer of K value 58-

60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice

husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms)

having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face)

& 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850

N/mm2 and resistance to spread of flame of Class A category with property of being

termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel

butt hinges of required size with necessary full body threaded star headed counter sunk

S.S screws, all as per direction of Engineer-In- Charge. (Note: stainless steel butt hinges

and necessary S.S screws shall be paid separately 0.00 0.00

6.3 Extra for cutting rebate in flush door shutters (Total area of the shutter to be measured)

Digitally signed by RAJ PAL

S.No. Description of Items Unit. Qty Rate Amount

6.4 Extra for providing vision panel not exceeding 0.1 sqm in all type of flush doors (cost of

glass excluded) (overall area of door shutter to be measured): 0.00 0.00

Rectangular or square sqm 3 152.30 456.90

6.5 Providing and fixing aluminium sliding door bolts, lSI marked anodised (anodic coating

not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or

shade, with nuts and screws etc.complete : 0.00 0.00

6.6 Providing and fixing aluminium pull bolt lock, lSI marked, anodised (anodic coating not

less than gradeAC 10 as per IS: 1868) transparent or dyed to required colour and shade,

with necessary screws bolts, nut and washers etc. complete. each 4 77.09 308.35

6.10 Providing and fixing aluminium tower bolts, lSImarked, anodised (anodic coating not

less than grade AC 10 as per IS :1868 ) transparent or dyed to required colour or

shade,with necessary screws etc. complete : 0.00 0.00

6.11 Providing and fixing aluminium handles, lSI marked, anodised (anodic coating not less

than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade,with

necessary screws etc. complete. 0.00 0.00

6.12 Providing and fixing aluminium hanging floor door stopper, lSI marked, anodised

(anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to

required colour and shade, with necessary screws etc. complete. 0.00 0.00

a) Twin rubber stopper each 15 55.33 829.94

6.13 Providing and fixing aluminium extruded section body tubular type universal hydraulic

door closer of approved (having brand logo with IS : 3564, embossed on the body, door

weight upto 80 kg , with double speed adjustment with necessary accessories and screws each 14

etc. complete. 751.86 10526.10

6.14 Roller blind (roller blind decorative fabric should be made up of 20% polyester, 75% to

80% PVC), it should have specific low emissivity treatment and lead free with

Greenguard certificaton. It should have 3% - 5% openness, including antimicrobial

additive preferly Microban. The thickness of fabic should be 0.90mm - 0.95mm, weight

of fabric should be 650g/sqm - 705g/sqm and UV blokage should be 95% - 97%. Flame

retardent with 10 years of warranty against any distortion in fabric due to any reason.

Roller Blind tube is made of Aluminum with a diameter of 38mm Anodized, bottom rail

is power coated & mechanism of plastic with chain and metal bracket, sturdy fixing

arrangement as per direction of Engineer in charge.

Sub Total VI 0.00 173407.71

7.00 SUB-HEAD: VII : STEEL WORK :- 0.00

7.1 Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing

in position and applying a priming coat of approved steel primer using structural steel etc.

as required. 0.00

a) In stringers, treads, landings etc. of stair cases, including use of chequered plate wherever

required, all complete 94.52 28356.93

b) In gratings, frames, guard bars, Ladder,Inserts, railings, brackets, gates and similar

Sub Total VII 0.00 48156.31

8.00 SUB-HEAD:VIII : FLOORING:- 0.00

8.1 Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate)

finished with a floating coat of neat cement, including cement slurry, but excluding the

cost of nosing of steps etc. complete. 0.00

40 mm thick with 20 mm nominal size stone aggregate sqm 10.00 469.71 4697.09

Digitally signed by RAJ PAL

S.No. Description of Items Unit. Qty Rate Amount

8.2 Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey

cement slurry mixed with pigment to match the shade of the slab, including rubbing and

polishing complete with base of cement mortar 1 : 4 (1 cement: 4 coarse sand):

8.3 Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm

(average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement

slurry mixed with pigment to match the shade of the slabs, including rubbing and

polishing complete. 1800.76 54022.70

8.4 Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by

the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of

approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement

mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm

including grouting the joints with white cement and matching pigments etc.The tiles

must be cut with the zero chipping diamond cutter only. Laying of tiles will be done with

the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber

mallet for placing the tiles gently and easily. 0.00 0.00

a) Double charge vitrified tile polished finish of size - Size of Tile 600x600 mm sqm 139.00 1111.68 154523.36

b) Glazed Vitrified tiles Matt/Antiskid finish of size - Size of Tile 600 x 600 mm sqm 11.00 1120.24 12322.68

8.5 Providing and laying Vitrified tiles in different sizes (thickness to be specified by

manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of

approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of

cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/

sqm including grouting the joint with white cement & matching pigments etc. complete.

b) Size of tile 300 x 600 mm

8.6 Grouting the joints of flooring tiles having joints of 3 mm width using spacers, using

epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener

and 0.20 kg of resin per kg), including filling / grouting and finishing complete as per

direction of Engineer-in-charge. 0.00 0.00

8.7 Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed

with neat cement slurry mixed with pigment to match the shade of tiles, including

rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement:

4 coarse sand). 0.00 0.00

Light shade pigment using white cement sqm 20.00 1072.18 21443.59

Sub Total VIII 0.00 494755.97

9.00 SUB-HEAD: IX: ROOFING :- 0.00

9.1 Making khurras 45 x 45 cm with average minimum thickness of 5cm cement concrete 1:

2 :4 (1 cement:2 coarse sand:4 graded stone aggregate of 20mm nominal size)

overP.V.C. sheet 1mx 1mx 400 micron,finished with 12mm cement plaster 1;3 (1 each 6 1368.52

cement: 3 coarse sand) and a coat of neat cement,rounding the edges and making and

finishing the outlet complete 228.09

Digitally signed by RAJ PAL

S.No. Description of Items Unit. Qty Rate Amount

9.2 Providing and fixing false ceiling at all heights including providing and fixing of frame

work made of special sections, power pressed from M.S. sheets and galvanized with zinc

coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle

cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm

centre to centre, one flange fiXed to the ceiling with dash fastener 12.5 mm dia x 50 mm

long with 6 mm dia bolts, other flange of cleat fixed to the angle hangers of 25x1Ox0.50

mm of required length with nuts & bolts of required size and other end of angle hanger

fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm

centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with

tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall

be fixed in a direction perpendicular to G.l. intermediate channelwith connecting clips

made out of 2.64 mm dia x 230 mm long G.l. wire at every junction, including fixing

perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long,

the perimeter of ceiling fiXed to wall/partition with the help of rawl plugs at 450 mm

centre, with 25 mm long dry wall screws@ 230 mm interval, including fixing of gypsum

board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5

x 25 mm at 230 mm c:Jc, including jointing and finishing to a flush finish of tapered and

square edges of the board with recommended jointing compound , jointing tapes,

finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint

and two coats of primer suitable for board, all as per manufacturer's specification and also

including the cost of making openings for light fittings, grills, diffusers, cutouts made

with frame of perimeter channels suitably fixed, all complete as per drawings,

specification and direction of the Engineer in Charge but excluding the cost of painting

a) 12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I) :2011

(Board with BIS certification marks) sqm 5.00 1036.85 5184.24

Sub Total IX 0.00 6552.76

10.00 SUB-HEAD: X : FINISHING:- 0.00

10.1 12 mm cement plaster of mix : 0.00

10.2 15 mm cement plaster on the rough side of single or half brick wall of mix : 0.00 0.00

10.3 15 mm cement plaster on the rough side of single or half brick wall of mix : 0.00 0.00

1:6 (1 cement: 6 coarse sand) sqm 591.00 302.34 178685.25

10.4 6 mm cement plaster of mix 0.00 0.00

(1 cement : 3 fine sand) sqm 220.00 229.77 50549.21

10.5 Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound )

content less than 50 grams/ litre, of approved brand and manufacture, including applying

additional coats wherever required, to achieve even shade and colour.

10.6 Providing and applying white cement based putty of average thickness 1 mm, of

approved brand and manufacturer, over the plastered wall surface to prepare the surface sqm 1306.00

even and smooth complete 119.34 155857.04

10.7 Applying priming coats with primer of approved brand and manufacture, having low

VOC ( Volatie Organic Compound) content with water thinnable cement primer on wall sqm 1306

surface having VOC content less than 50grames/ litre.

10.8 Painting with synthetic enamel paint ,having VOC (Volatile Organic Compound) content

less than 150 gms/litre,of approved brand and manufacture,including applying additional

coats wherever required to achieve even shade and colour. 0.00 0.00

Two or more coats sqm 110 173.02 19032.72

Digitally signed by RAJ PAL

S.No. Description of Items Unit. Qty Rate Amount

10.10 Providing and finishing 24 gauge 19 mm size galvanised chicken wire mesh of approved

make and design at junctions of RCC and brick work and other locations including

necessary clips and "U" nails rawl plugs,screws etc. complete for all height as per

specifications & direction of the Engineer-In-Charge.

10.11 Providing & Applying high quality acrylic modified resin based texture of Dholpur/Red

sand stone Pattern with anti algae and UV resistance properties to be applied as

intermediate finish in desired pattern @ 43.04 kg/10 sqm to form film of 1- 1.5 mm

thickness after scrapping and properly cleaning the surface to remove loose particles from

the plaster surface, followed by top coating with Premium Acrylic Smooth exterior paint

with Silicone additives of required shade by two or more coats @ 1.43 litre/10 sqm,

complete as the direction of Engineer -in-Charge.

Sub Total X 0.00 1170360.51

11.00 SUB-HEAD: XI: ROAD WORK :- 0.00

11.1 Earth work in surface excavation not exceeding 30 em in depth but exceeding 1.5 m in

width as well as 10 sqm on plan including getting out and disposal of excavated earth

upto 50 m and lift upto 1.5 m,as directed by Engineer-in- Charge: 0.00

All kinds of soil sqm 65 99.30 6454.68

11.2 Providing and laying 60 mm thick faciory made cement concrete interlocking paver block

of M -30 grade made by block making machine with strong vibratory compaction, of

approved size, design & shape, laid in required colour and pattern over and including 50 sqm 30

mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete

as per the direction of Engineer-in-charge 743.34 22300.11

11.3 Providing and laying at or near ground level factory made kerb stone of M-25 grade

cement concrete in position to the required line, level and curvature, jointed with cement

mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves

(thickness of joints except at sharp curve shall not to more than 5 mm), including making

drainage opening wherever required complete etc. as per direction of Engineer- in-charge

(length of finished kerb edging shall be measured to calculate volume for payment).

(Precast C.C. kerb stone shall be approved by Engineer-in-charge).

11.4 Providing and laying of PVC 150mm dia pipes through trenchless road technoligies

across the pavement/roads including necessary PVC fittings such sockets,bends elbows

union etc complete as per instruction and direction of Engineer-In-Charge.

Sub Total XI 0.00 53406.66

12.00 SUB-HEAD: XII: WATERPROOFING WORKS :- 0.00

12.1 Grading roof for water proofing treatment with 0.00

Cement concrete 1:2:4 (1 Cement : 2 coarse sand : 4 graded stone aggregate 20 mm

nominal size) cum 17 6150.35 104555.93

12.2 Providing and laying integral cement based water proofing treatment including

preparation of surface as required for treatment of roofs, balconies, terraces etc consisting

of following operations: 0.00 0.00

(a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with

water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge

over the RCC slab including adjoining walls upto 300 mm height including cleaning the

surface before treatment. 0.00 0.00

{b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm size

with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing

compound conforming to IS : 2645 and approved by Engineer-in-charge over 20 mm

thick layer of cement mortar of mix 1:5 (1 cement :5 coarse sand) admixed with water

proofing compound conforming to IS : 2645 and approved by Engineer-in-charge to

required slope and treating similarly the adjoining walls upto 300 mm height including

rounding of junctions of walls and slabs. 0.00 0.00

Digitally signed by RAJ PAL

S.No. Description of Items Unit. Qty Rate Amount

(c) After two days of proper curing applying a second coat of cement slurry using 2.75

kg/ sqm of cement admixed with water proofing compound conforming to IS : 2645 and

approved by Engineer-in-charge 0.00 0.00

(d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement

:4 coarse sand) admixed with water proofing compound conforming to IS : 2645 and

approved by Engineer-in-charge including laying glass fibre cloth of approved quality in

top layer of plaster and finally finishing the surface with trowel with neat cement slurry

and making pattern of 300x300 mm square 3 mm deep. 0.00 0.00

(e) The whole terrace so finished shall be flooded with water for a minimum period of

two weeks for curing and for final test. “All above operations to be done in order and as

directed and specified by the Engineer-in-Charge”: 0.00 0.00

With average thickness of 120 mm and minimum thickness at khurra as 65 mm. sqm 230.00 1288.30 296308.51

12.3 Providing and applying integral crystalline slurry of hydrophilic in nature for

waterproofing treatment to the RCC structures like retaining walls of the basement, water

tanks, roof slabs, podiums, reservior, sewage & water treatment plant, tunnels / subway

and bridge deck etc., prepared by mixing in the ratio of 5 : 2 (5 parts integral crystalline

slurry : 2 parts water) for vertical surfaces and 3 : 1 (3 parts integral crystalline slurry : 1

part water) for horizontal surfaces and applying the same from negative (internal) side

with the help of synthetic fiber brush. The material shall meet the requirements as

specified in ACI-212-3R-2010 i.e by reducing permeability of concrete by more than

90% compared with control concrete as per DIN 1048 and resistant to 16 bar hydrostatic

pressure on negative side. The crystalline slurry shall be capable of self-healing of cracks

up to a width of 0.50 mm. The work shall be carried out all complete as per specification

and the direction of the engineer-in-charge. The product performance shall carry

guarantee for 10 years against any leakage. 0.00 0.00

For vertical surface two coats @ 0.70 kg per sqm per coat sqm 24 361.65 8679.61

For horizontal surface one coat @1.10 kg per sqm. sqm 10 277.45 2774.51

Sub Total XII 0.00 412318.56

13.00 SUB-HEAD: XIII: ALUMINUM WORKS :- 0.00

13.1 Providing and fixing aluminium work for doors, windows, ventilators and partitions with

extruded built up standard tubular sections/ appropriate Z sections and other sections of

approved make conforming to IS: 733 and IS : 1285, fixed with rawl plugs and screws or

with fixing clips, or with expansion hold fasteners including necessary filling up of gaps

at junctions, at top, bottom and sides with required PVC/neoprene felt etc. Aluminium

sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever

required including cleat angle, Aluminium snap beading for glazing / panelling, C.P.

brass / stainless steel screws, all complete as per architectural drawings and the directions

of Engineer-in-charge. (Glazing and panelling to be paid for separately).

a) For Fixed Portion. 0.00

Polyester powder coated aluminium (minimum Polyester powder coating 50 micron) Kg 1077.00 412.85 444639.76

b) For shutters of doors, windows & ventilators including providing and fixing hinges/

pivots and making provision for fixing of fittings wherever required including the cost of

EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) 0.00 0.00

Polyester powder coated aluminium (minimum thickness of polyester powder coating 50

13.2 Providing and fixing anodised aluminium (anodised transparent or dyed to required shade

according to IS: 1868. Minimum anodic coating of grade AC 15) sub frame work for

windows and ventilators with extruded built up standard tubular sections of approved

make conforming to IS: 733 and IS: 1285, fixed with dash fastener of required dia and

size (Dash fastener to be paid for separately).

13.3 Filling the gap in between aluminium frame & adjacent RCC/ Brick/ Stone work by

providing weather silicon sealant over backer rod of approved quality as per architectural

drawings and direction of Engineer-in-charge complete. 0.00 0.00

Upto 5mm depth and 5 mm width Rmt 105 113.26 11892.24

13.4 Providing and fixing glazing in aluminium door, window, ventilator shutters and

partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural

drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading

shall be paid in basic item): 0.00 0.00

Digitally signed by RAJ PAL

S.No. Description of Items Unit. Qty Rate Amount

With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm) sqm 42 1288.91 54747.73

13.5 Providing and fixing aluminium handles, lSI marked, anodised (anodic coating not less

than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade,with

necessary screws etc. complete : 125 mm each 12 50.66 607.98

13.6 Providing and fixing aluminium casement stays, lSI marked, anodised (anodic coating

not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and

shade,with necessary screws etc. complete. each 8 54.68 437.44

13.7 Providing and fixing aluminium tower bolts, lSImarked, anodised (anodic coating not

less than grade AC 10 as per IS :1868 ) transparent or dyed to required colour or

shade,with necessary screws etc. complete : 0.00 0.00

13.8 Providing and supplying aluminium extruded tubular and other aluminium sections as per

the architectural drawings and approved shop drawings , the aluminium quality as per

grade 6063 T5 or T6 as per BS 1474,including super durable powder coating of 60-80

microns conforming to AAMA 2604 of required colour and shade as approved by the

Engineer-in-Charge. ( The item includes cost of material such as cleats, sleeves, screws

etc. necessary for fabrication of extruded aluminium frame work. Nothing extra shall be

paid on this account). The weight of aluminium extruded section shall be taken for

purpose of payment 316.84 98219.14

Sub Total XIII 0.00 931169.12

14.00 SUB-HEAD: XIV: PLUMBING WORKS :- 0.00

14.1 Providing and fixing white vitreous china extended wall mounting water closet of size 780x370x690

mm of approved shape including providing & fixing white vitreous china cistern with dual flush

fitting, of flushing capacity 3 litre/ 6 litre (adjustable to 4 litre/ 8 litres), including seat cover, and

cistern fittings, nuts, bolts and gasket etc

complete each 4 11470.60 45882.40

14.2 Providing and fixing toilet paper holder. ( Model No. K-97503T-CP from Kohler or Equivalent )

a) C.P. brass 0.00 0.00

14.3 Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and as per the

direction of Engineerin-charge.( Model No. K-7314IN-CP from Kohler or Equivalent ) each 4 791.36 3165.45

14.13 Providing and fixing round wall mounted wash basin 482 x 466 x 172 mm size specially fabricated

brackets painted white, with connection pipe to wall including central hole, rubber adopter for waste

connection complete, including cutting and making good the walls wherever required. ( Model No.

K-31458IN-0 from Kohler or Equivalent ) each 2 4346.84 8693.68

14.4 Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 : ( Model No.

K-75377IN-4CP from Kohler or Equivalent ) 0.00 0.00

15 mm nominal bore each 2 270.15 540.30

14.5 Providing and fixing PTMT soap Dish Holder having length of 138mm,breadth 102mm, height of

75mm with concealed fitting Arrangements, weighing not less than 106 gms each 4 85.23 340.93

14.6 Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality

conforming to IS:8931 0.00 0.00

15mm nominal bore each 22 439.20 9662.31

14.7 Providing and fixing Stainless Steel A ISI 304 kitchen sink as per IS:13983 with C.I. brackets

and stainless steel plug 40mm including painting of fittings and brackets, cutting and making good

the walls wherever required. 0.00 0.00

Kitchen sink with drain board (Size 1040 x 510 mm bowl depth 250 mm) each 1 5311.65 5311.65

14.8 Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality

conforming to IS:8931 0.00 0.00

15mm nominal bore each 0.00 0.00

14.9 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot &

cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps

at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement

and the cost of cutting chases and making good the same including testing of joints complete as

per direction of Engineer in Charge. Concealed work, including cutting chases and making good

the walls etc. 0.00 0.00

a) 15 mm dia nominal bore metre 40 380.69 15227.70

Digitally signed by RAJ PAL

S.No. Description of Items Unit. Qty Rate Amount

b) 20 mm dia nominal bore metre 25 411.13 10278.24

14.10 Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :

20 mm nominal bore metre 2 412.93 825.85

14.11 Constructing brick masonry road gully chamber 110x50x77.5 cm with bricks in cement mortar 1:4

(1 cement : 4 coarse sand) including 500x450 mm precast R.C.C. horizontal grating with frame

and vertical grating complete as per standard design: 0.00 0.00

With common burnt clay F.P.S. (non modular) bricks of class

designation 7.5 each 2 4556.30 9112.61

14.12 Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701

marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet per liter 2000

and overflow pipes but without fittings and the base support for tank. 8.41 16824.50

14.19 Making connection of G.I. distribution branch with G.I. main of following sizes by providing and

fixing tee, including cutting and threading the pipe etc. complete 0.00 0.00

25 to 40 mm nominal bore each 1 697.38 697.38

14.14 Providing and fixing UPVC rain water pipes of 6 kg./cm 2 conforming to IS: 4985 including all

fittings with or without access door i.e bends, junctions, cowls, offsets, etc., and jointing with

solvent cement and excavation, refilling and disposal of surplus earth, including cutting holes in

walls and floors, wherever required and making good the same, complete as directed by the

Engineer-in-Charge. metre 20 593.45 11868.92

14.15 Providing and Fixing central hole C.P. brass Sink mixer with Swinging Casted spout & connecting

legs and flanges, including cutting and making good the walls wherever required

14.16 Providing and fixing ABS Chrome plated Hand Shower (Health Faucet) with 8 mm dia, 1.2 Meter long

Flexible tube & wall hook including cutting and making good the walls wherever required complete as per

instructions of the engineer-in-charge . each 4 1089.00 4356.02

14.17 Providing and Fixing straight / offset type flexible single body push fit type WC pan connector with

factory supplied seal guard with integral Single mould sealing fins made of flexible EVA body,

including bush / adaptor for use with C.I. Pipe as supplied with the pan connector.

14.18 Providing and Fixing in position storage type Hot Water electrical vertical heaters with copper

container, insulation, and stove enameled M.S. jacket, thermostatically controlled immersion

heater, with pilot lamp, 15/20mm dia inlet with non return valve and 15/20mm dia outlet including

making connections complete in all respects. (wall mounted with suitable M.S. bolts and nuts)

14.19 Making connection of drain or sewer line with existing manhole including Making connection of

drain or sewer line with existing manhole including breaking into and making good the walls, floors

with cement concrete 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm

nominal size) cement plastered on both sides with cement mortar 1:3 (1 cement : 3 coarse sand),

finished with a floating coat of neat cement and making necessary channels for the drain etc.

complete : 0.00 0.00

For pipes 100 to 250 mm diameter each 1 619.79 619.79

Sub Total XIV 0.00 160132.65

15.00 SUB-HEAD: XV: ELECTRICAL WORKS :- 0.00

A POINT WIRING 0.00

15.1 Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 Sqmm FRLS PVC

insulated copper conductor single core cable in surface (on surface of wall/ slab, metal decking/

trusses etc as per site conditions with suitable fixing arrangment)/ recessed steel conduit, with

modular switch, modular plate, suitable GI box and earthing the point with 1.5 Sqmm FRLS

PVC insulated copper conductor single core cable etc as required.

15.2 Wiring for group controlled (looped) light point/ fan point/ exhaust fan point/ call bell point

(without independent switch etc.) with 1.5 sq. mm FRLS PVC insulated copper conductor single

core cable in surface/ recessed steel conduit and earthing the point with 1.5 sq. mm FRLS PVC

insulated copper conductor single core cable etc. as required.

Digitally signed by RAJ PAL

10 of 14 SINGH

S.No. Description of Items Unit. Qty Rate Amount

15.3 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC

insulated copper conductor, single core cable in surface/ recessed medium class PVC Conduit as

required. 0.00 0.00

15.3.1 2 x 1.5 Sq.mm. + 1 x 1.5 Sq.mm earth wire metre 300 178.19 53456.03

15.4 Wiring for light/ power plug with 2 x 4 sq.mm FRLS PVC insulated copper conductor single

core cable in surface/ recessed medium class PVC conduit alongwith 1 No. 4 sq.mm FRLS PVC

insulated copper conductor single core cable for loop earthing as required.

15.5 Wiring for light/ power plug with 4 x 4 sq.mm FRLS PVC insulated copper conductor single

core cable in surface/ recessed medium class PVC conduit alongwith 2 Nos. 4 sq.mm FRLS

PVC insulated copper conductor single core cable for loop earthing as required.

15.6 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in

recess, including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16

amps modular switch, connection etc. as required. No. 6 448.14 2688.86

15.7 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in

recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular

switch, connections etc. as required. No. 10 341.84 3418.43

15.8 Supplying and fixing following size/ modules, GI box along with modular base & cover plate for

modular switches in recess etc as required. 0.00 0.00

15.9 Supply and fixing of following modular switch socket on the existing modular plate & switch

box including connection but excluding modular plate etc as required. 0.00 0.00

15.9.3 Single Phase motor starter for 2 TR A/C unit (11 to 18Amp) No. 4 390.79 1563.15

15.9.4 Flex / Cord Outlet No. 4 227.90 911.58

Sub Total XV (I) 0.00 245833.48

B SUB MAIN CABLES 0.00

15.9 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC

insulated copper conductor, single core cable in surface/ recessed medium class PVC Conduit as

required. 0.00

15.9.1 4 X 10 sq. mm + 2 X 6 sq. mm earth wire metre 20 768.57 15371.48

15.10 Laying of one number PVC insulated and PVC sheathed/ XLPE power cable of 1.1 kV grade of

following size direct in ground including excavation, sand cushioning, protective covering and

refilling the trench etc. as required. 0.00 0.00

15.10.1 Above 35 sq. mm and upto 95 sq. mm metre 35 218.72 7655.15

15.11 Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories

like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting,

jointing etc..direct in ground (75 cm below ground level) including excavation and refilling the

trench but excluding sand cushioning and protective covering etc., complete as required.

15.11.1 90 mm dia (OD-90 mm & ID-76 mm nominal) metre 20 221.78 4435.55

15.12 Supply of following size of 1.1kV grade multicore aluminium conductor XLPE insulated &

PVC sheathed armoured power cable as per IS: 7098 (Part-1) 1988 complete as required.

15.13 Suppling and making indoor end termination with brass compression gland and aluminium lugs

for following size of PVC insulated and PVC sheathed/ XLPE aluminium conductor cable of

1.1kV grade as required. 0.00 0.00

Sub Total XV (II) 0.00 49329.43

C MAIN DISTRIBUTION BOARDS, SUB DISTRIBUTION & DISTRIBUTION BOARDS

15.14 Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB

distribution board, 415V, on surface/ recess, complete with tinned copper bus bar, neutral bus

bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But

without MCB/RCCB/Isolator) 0.00

Digitally signed by RAJ PAL

11 of 14 SINGH

S.No. Description of Items Unit. Qty Rate Amount

15.15 Supplying and fixing following rating, four pole, (three phase and neutral), 415V, residual

current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB

complete with connections, testing and commissioning etc. as required. 0.00 0.00

40 Amps (30 milliamperes) No. 1 2438.02 2438.02

15.16 Supplying and fixing following rating, four pole, 415V, isolator in the existing MCB DB

complete with connections, testing and commissioning etc. as required. 0.00 0.00

15.17 Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, “C” curve, miniature circuit

breaker suitable for inductive load of following poles in the existing MCB DB complete with

connections, testing and commissioning etc. as required. 0.00 0.00

15.18 Charges payable for BSES for connection & load release - LT Side No. 1 26766.25 26766.25

15.19 1 Nos. MCCB Isolator after E.B meter installed No. 1 15295.00 15295.00

Sub Total XV (III) 0.00 52740.98

D LIGHT FIXTURES & FANS 0.00

15.20 Installation, testing and commissioning of pre-wired, fluorescent fitting/ compact fluorescent

fitting/ LED Light fitting of all types, complete with all accessories and tube etc. directly on

ceiling/ wall, including connection with 1.5 sq. mm FRLS PVC insulated, copper conductor,

single core cable and earthing etc. as required. No. 11 157.54 1732.92

15.21 Installation, testing and commissioning of wall bracket/ ceiling fittings of all sizes and shapes

containing upto two GLS/CFL/ LED lamps per fitting, complete with all accessories including

connections etc. as required. No. 9 91.01 819.05

15.22 Supply, of decorative wall mounting bracket diffuser, E -27/ B-22D Lamp holder, complete with

9 watt LED (minimum 800 lumens) E-27/ B-22D ball type lamp complete with all accessories

for proper installation complete ia all respect. No. 9 1313.08 11817.68

15.23 Supply of 10W LED,800 Lumens,6500 K L-70@50,000 hours wall/ceiling mounted (600mm)

ultraslim linear batten fixture, polycarbonate housing in white powder coated finish

polycarbonate diffuser in opal finish, IP-20, CRI>80, THD<20%,HPF>0.95, integral electronic

driver complete in all respect. No. 12 855.76 10269.06

15.24 Supply of 15W LED, 1350 Lumen 5700K, L-70@50,000 hours surface mounted circular

downlighter, PDC aluminium housing in white finish with polycarbonate diffuser in opal finish,

IP-20, CRI>80,inbuilt replaceable electronic driver THD<10%, HPF>0.95 complete in all

15.25 Supply of 20W LED, 1600 Lumens,6500 K L-70@50,000 hours wall/ceiling mounted ultraslim

linear batten fixture,polycarbonate housing in white powder coated finish polycarbonate diffuser

in opal finish,IP-20,CRI>80,THD<20%,HPF>0.95,integral electronic driver complete in all

15.26 Supply, of wall Mounted LED bulkhead fixture having minimum 600 lumens & efficacy better

than 80 lumens/ watt with pressure diecast aluminium housing & polycarbonate diffuser

complete with electronic driver and all accessories as required for proper installation complete in

all respect. No. 12 985.76 11829.15

15.27 Supply,installation, testing and commissioning of following sizes of ceiling fan with step type

ISI mark modular regulator complete with double pole bearing motor, blades, down

rod,canopy,capacitor etc. including connection with step type ISI mark modular

regulator.1.5sqmm. FRLS PVC insulated copper conductor single core cable as required.

15.28 Supply, installation, testing and commissioning of following sizes of Havey duty Exhaust fan

with Louver suitable for operation on single phase 230Volt AC 50 Hz supply complete with all

fixing accessories as required. 0.00 0.00

Digitally signed by RAJ PAL

12 of 14 SINGH

S.No. Description of Items Unit. Qty Rate Amount

15.29 Supply, installation, testing and comissioning of air-cooled hi-wall split type air-

conditioners with latest star rating system as per BEE amended upto date complete

with Indoor unit (IDU), Outdoor unit (ODU), surface/ concealed copper Refrigerant

piping with insulation (closed cell elastomeric nitrile rubber tubular pipe section) upto

3Mtr (IDU to ODU), copper power cable upto 3.5Mtr (IDU to ODU), R-32/ R410A/ R-

407 Green Refrigerant, wireless remote control, suitable for working between 180-260V

with low & high voltage cutoff and 50hz, 1 phase AC supply, capable of performing 0.00 0.00

1.5 TR with 5 Star BEE Rating, min. ISEER 4.5 (Inverter Type) each 2 38237.50 76475.00

2.0 TR with 5 Star BEE Rating, min. ISEER 5.0 (Inverter Type) each 3 49708.75 149126.25

Sub Total XV (IV) 0.00 316516.26

E TELEPHONE & TV SOCKET OUTLET 0.00

15.30 Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for

modular switches in recess etc. as required. 0.00

15.31 Supplying and fixing following modular switch/ socket on the existing modular plate & switch

box including connections but excluding modular plate etc. as required. 0.00 0.00

Telephone socket outlet No. 2 113.18 226.37

TV antenna socket outlet Nos. 1 113.18 113.18

15.30 Supplying and fixing of following sizes of medium class PVC conduit along with accessories in

surface/ recess including cutting the wall and making good the same in case of recessed conduit

as required. 0.00 0.00

15.31 Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE

insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing

surface/ recessed steel/ PVC conduit as required. RM 50 110.89 5544.44

Sub Total XV (V) 0.00 18340.23

F EARTHING SYSTEM 0.00

15.32 Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and

providing masonry enclosure with cover plate having locking arrangement and watering pipe of

2.7 meter long etc. with charcoal/ coke and salt as required. Set 2 5714.21 11428.42

15.33 Earthing with G.I. earth pipe 4.5 meter long, 40 mm dia including accessories, and providing

masonry enclosure with cover plate having locking arrangement and watering pipe etc. with

charcoal/ coke and salt as required. Set 2 5242.36 10484.72

15.34 Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as

required. metre 20 186.60 3731.98

15.35 Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode

including connection with G.I. nut, bolt, spring, washer excavation and re-filling etc. as required.

15.36 Providing and laying earth connection from earth electrode with 6 SWG dia G.I. Wire in 15 mm

dia G.I. pipe from earth electrode including connection with G.I. thimble excavation and re-

filling as required. metre 10 219.48 2194.83

15.37 Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing along with

existing surface/ recessed conduit/ submain wiring/ cable as required. metre 20 32.12 642.39

Sub Total XV (VI) 0.00 33881.48

16.00 IP CCTV SURVEILLANCE SYSTEMS 0.00 0.00

16.1 1/3” 2 MP progressive scan imager, 1920 x 1080 resolution, 2.8 mm Fixed lens F2.0, onvif

supported, True day/ night (IR-cut filter), Digital Wide Dynamic Range, Low-light performance

down to 0.08 lux (color) or 0 lux with IR LEDs on Up to 82 ft (25 m) IR illumination,

depending on scene reflectance, H.265 Smart Codec PoE (802.3af) or 12 VDC support IP66 -

rated housing, ul certified. Nos. 5 9559.38 47796.88

16.2 Supply Installation Testing and Commissioning 8 Channel NVR (Network Video Recorder), for

recording upto 8@ 1080P with 02 nos. SATA HDDs minimum 10TB storage or more

(recording requirement all cameras recording at 2MP, 25fps for 30 days), Front Control Pannel

with LEDs Indication, 3 nos. USB, Video Export feature on USB, Search Mode: Time/ Date;

Alarm; Motion Detection (MD); Exact Search (accurate to a second); Smart Search, HDMI and

VGA Output, Alarm Input (16 nos.), Alarm Output (6 nos.), 8 POE Ports, eSATA Device,

320Mbps each Incoiming & Outgping throughput, Mobile app based client for Android & iOS

based devices, Certification: CE, FCC & UL including fixing accessories and cable termination

with required connectors/ Jack.

Digitally signed by RAJ PAL

13 of 14 SINGH

S.No. Description of Items Unit. Qty Rate Amount

16.3 Supply, installation, testing & commissioning of 42" inches 500 TVL high resolution LCD

monitor with suitable workstation as required. Nos 1 30590.00 30590.00

16.4 Supply and drawing of UTP 4 pair CAT 6 LAN cable in the existing surface/ recessed steel/

PVC conduit as required. 0.00 0.00

16.5 Supplying and fixing of following sizes of medium class PVC conduit along with accessories in

surface/ recess including cutting the wall and making good the same in case of recessed conduit

as required. 0.00 0.00

Sub Total XVI 0.00 120228.26

17.00 FURNITURE 0.00

17.1 Providing and placing school furniture as listed below : 0.00

Option -1 0.00

b) Kids Table cum Chairs set 0.00 0.00

c) Office Table 0.00 0.00

d) Staff Table ( 6 setaer ) 0.00 0.00

f) Office Chairs each 15 2200 33000.00

g) Providing and fixing of wall mounted white board (size 4 ft x 6 ft),pen, duster ,wipes

etc.complete in all respect in class room. each 3 4275 12825.00

Sub total XVII 303785.25

GRNAD TOTAL 8095171.36

Digitally signed by RAJ PAL

14 of 14 SINGH