Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹66.1 LAccepted-AOC | L1 | Accepted-AOC AOC | |
| 2 | L2₹69.8 L+₹3.7 L (5.56%)Rejected-Finance | L2 | Rejected-Finance Second lowest bidder | |
| 3 | L3₹69.8 L+₹3.7 L (5.57%)Rejected-Finance | L3 | Rejected-Finance Third lowest bidder | |
| 4 | L4₹70.5 L+₹4.5 L (6.75%)Rejected-Finance | L4 | Rejected-Finance Fourth lowest bidder | |
| 5 | L5₹71.8 L+₹5.7 L (8.68%)Rejected-Finance N A | NA | NA | 121004 | L5 | Rejected-Finance fifth lowest bidder |
Tender Value
₹74.3 L
EMD Value
₹1.5 L
Closing Date
14 Sept 2023, 5:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Executive Engineer
HPSIDC Shimla
Construction of Business Promotion Centre Cum Inspection Hut
2023_SIDC_78371_1
Job No. 4
Open Tender
Civil Works
Item Rate
360 days
Una
Please refer Tender documents.
13 documents required · 13 mandatory
₹5,900
₹1.5 L
4 Dec 2023
4 Sept 2023
15 Sept 2023
4 Sept 2023
14 Sept 2023
4 Sept 2023
Amount
Excavation in earth work in all heights and depth in all kinds of soils, including saturated soil comprising of pick work, jumper work, and blasting work both in soft and hard rock with chiselling and wedging out of rock (where blasting is prohibited) and their intermediate classification of soils including, dewatering wherever required, setting out to required lines, levels as shown on the drawing and directed by the Engineer -in-Charge at site. according to the HP.PWD. specification
Providing and laying cement concrete 1:4:8 (1 cement:4 sand:8 graded stone aggregate 20mm nominal size) and curing complete including cost of form work in:Foundation and plinth and wall etc. including carriage of materials upto all leads and lifts.
Providing form work with steel plates 3.15 mm( three decimal fifteen millimeter ) thick welded with angle iron in frame of 30x30x5mm(thirty into thirty into five millimeter) so as to give a fair finish including centering shuttering strutting and propping etcetera with wooden battens and ballies for all heights of propping and centering below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in including carriage of materials upto all leads and lifts. (a). Foundations, footings & bases of columns etc., and mass concrete.including enitre carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .
(B).columns, pillars, posts and struts square rectangular or polygonal in plan in any height including entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .
(C). Lintels, beams, plinth beams, girders, bressumers and cantilevers including enitre carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .
(D).Suspended floors, roofs, landings, balconies and access platformincluding enitre carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .
(e). Stair cases with slopping or stepped soffits including landings etc.including enitre carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .
(f). Edges of slab, chajjas etc. including carriage of materials upto all leads and lifts.
(g). Vertical surfaces such as walls (any thickness) partitions and like i/c attached buttresses, pillasters, plith and string courses and the liike including carriage of materials upto all leads and lifts.
Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :1:1.5:3 (1 cement : 1.5 coarse sand): 3 graded stone aggregate 20 mm nominal size) Foundations, footings & bases of columns etc., and mass concrete and curing complete, mixing the material in mechanical mixture and compacting the concrete with viberator complete excluding cost of form work and reinforcement for reinforced concrete work including carriage of materials upto all leads and lifts and as per the direction of Engineer-in-Charge. including carriage of materials upto all leads and lifts.
ProvReinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement :1:1.5:3 (1 cement : 1.5 coarse sand): 3 graded stone aggregate 20 mm nominal size) and curing complete, mixing the material in mechanical mixture and compacting the concrete with viberator complete excluding cost of form work and reinforcement for reinforced concrete work including carriage of materials upto all leads and lifts and as per the direction of Engineer-in-Charge. including carriage of materials upto all leads and lifts.
Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, fecia ,staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand) : 3 graded stone aggregate 20 mm nominal size).and curing complete, mixing the material in mechanical mixture and compacting the concrete with viberator complete excluding cost of form work and reinforcement for reinforced concrete work including carriage of materials upto all leads and lifts and as per the direction of Engineer-in-Charge. including carriage of materials upto all leads and lifts.
Providing and laying tor steel(Tata/Sail/RINL/Shyam steel make) reinforcement for reinforced cement concrete work including ,bending binding,straightening and placing in position complete in all floor level/ heights including cost of binding wire complete including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .
Brick work with common burnt clay F.P.S. (non modular) bricks of 1st class in foundation and plinth in in Cement Mortar 1:6 (1 Cement : 6 Sand) upto all height including carriage of material within all leads and lifts.
Brick work with common burnt clay F.P.S. (non modular) bricks of 1st class in superstructure above plinth level up to floor V level in all shapes and sizes in 1:6 (1cement:6sand) up to all height including carriage of material within all leads, lifts and heights.
Half Brick work 7 cm thick with common burnt clay F.P.S. (non modular) brick of 1st class in cement mortar 1:3 (1 cement : 3 coarse sand) in superstructure above plinth level and upto floor five level. including carriage of materials upto all leads and lifts and as per the direction of Engineer in charge.
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-incharge. (Glazing, paneling and dash fasteners to be paid for separately) : including carriage of materials upto all leads and lifts. (a) For fixed portion Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron) including carriage of materials upto all leads and lifts.
For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Powder coated aluminium (minimum thickness of powder coating 50 micron) including carriage of materials upto all leads and lifts.
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 4.0 mm thickness (weight not less than 10 kg/ sqm) including carriage of materials upto all leads and lifts.
Providing and fixing 12mm thick prelaminated Particle board board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer- in-charge. Pre-laminated particle board with decorative lamination on both sides including carriage of materials upto all leads and lifts.
Providing and fixing ACP sheet ISI 4mm thick complete in all respect including carriage of materials upto all leads and lifts.
Providing and fixing stainless steel wire gauge of IS gauge designation 140 g with wire of dia 0.71 mm to windows and clerestory windows including beading and U of aluminium including carriage of materials upto all leads and lifts.
Providing and fixing anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineerin- charge. (Only weight of grill to be measured for payment). including carriage of materials upto all leads and lifts.
Providing and fixing dyed Stainless steel sliding door bolt anodized colour and shade with bolts and nuts screws etc., complete: including carriage of materials upto all leads and lifts and as per the direction of Engineer-in-Charge. (a) 300X16 mm
Providing and fixing dyed aluminium hooks and eyes dyed to required shade and colour with screws etc., complete including carriage of materials upto all leads and lifts and as per the direction of Engineer-in-Charge. 150mm
Providing and fixing dyed aluminium tower bolt (barrel type) anodized transparent or dyed to required shade and colour with screws etc., complete including carriage of materials upto all leads and lifts and as per the direction of Engineer-in-Charge. (( a). 200x10mm
Providing and fixing Stainless steel handles dyed to required colour of shade with necessary screws etc., complete: including carriage of materials upto all leads and lifts and as per the direction of Engineer-in-Charge. ( a). 200mm
Providing and fixing hydraulic door closer ISI mark with screws etc. complete.including carriage of materials upto all leads and lifts.
6mm (Six milimetre) cement plaster to ceiling in cement mortar 1:4 (One Cement is to four Sand) in all floor level. The rate isincluding carriage of materials within all leads and lifts and as per the direction of Engineer-in-Charge.
15mm (fifteen milimetres) thick cement plasters in single coat on rough/fair side of brick/concrete/stone walls for interior/exterior plastering upto all floor level including arises, internal rounded angles, chamfers and or rounded angles not exceeding 80mm (Eighty milimetres) in girth and finished even and smooth with cement mortar 1:6 (one cement: six sand) including carriage of materials within all leads and lifts and as per the direction of Engineer-in-Charge.
Rough cast plaster upto 10 m height above ground level with a mixture of sand and gravel or crushed stone from 6 mm to 10 mm nominal size, dashed over and including the fresh plaster in two layers, under layer 12 mm cement plaster 1:4 (1 cement : 4 coarse sand) and top layer 10 mm cement plaster 1:3 (1 cement : 3 fine sand) mixed with 10% finely grounded hydrated lime by volume of cement. Ordinary cement finish using ordinary cement including carriage of materials within all leads and lifts and as per the direction of Engineer-in-Charge.
Applying Birla white wall care putty two coats over plaster surface after thoroughly brushing the surface free from mortar drops, dust, loose materials and other foreign matters sand papered smooth to give final matter finish to the surface complete. including carriage of materials upto all leads and lifts.
Distempering (two coats) with oil bound washable distemper of approved brand and manufacture and of required shade on undecorated wall surfaces to give an even shade over and including a priming coat with distemper primer of approved brand and manufacture after thoroughly brushing the surface free from mortar droppings and other foreign matter and also including preparing the surface even and sand papered smooth. Priming coat with distemper primer including carriage of materials upto all leads and lifts.
Finishing wall with weather proof exterior grade emulsion of approved design (Apexultima) or its equarlied on undecorated wall surfaces (two coats) to give an even shade and final finish after throughly cleaning the surface to remove all dirt, dust and other foreign matter etc including sand paper smooth and cement primer complete. including carriage of materials upto all leads and lifts.
Providing and fixing double charge 10mm thick Mat Finish heavy duty vetrified tiles Nitco or equivalant 600mmx600mmx10mm manufactured of required shade and colour in flooring, treads of steps and landings laid with spacers laid over 12mm thick cement mortar 1:3 (1 cement : 3 sand) and jointed with grouting of Epoxy material mixed with pigment to match the shade of tiles in all storeys, height, levels and location as required complete.including carriage of materials upto all leads and lifts.
Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge : Flamed finish granite stone slab Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent. including carriage of materials upto all leads and lifts
Providing and fixing Digital wall tiles 10 mm thick , of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. including carriage of materials upto all leads and lifts.
Providing and laying spartic ceremic anti skid tiles 10mm thick of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. including carriage of materials upto all leads and lifts.
Steel work welded in built up sections/ framed work, hollow section, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works .including carriage of materials upto all leads and lifts.
Providing and fixing on wall face PVC(D-Plast) rain water pipes of working pressure not less than 4.5 kg/sqm including filling the joints withapproved adhesive complete. 110mm dia pipes including carriage of materials upto all leads and lifts
Providing and fixing accessories for wall face PVC(D-Plast) rain water pipes ie. bends, tee clamps etc. 110mm dia pipes including carriage of materials upto all leads and lifts
Providing and fixing 0.60mm thick prepainted steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 microns over 5 microns primer coating to back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6mm dia metre with prepainted limpet and rubber washers complete with all accesoriees as required as per the direction of Engineer-in-charge including carriage of materials upto all leads and lifts
Providing and fxing Stainless steel (Grade-304) railing made of hollow tubes, channels, plates etc. i/c welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc. of required size, as per drawing on the top of the floor or the side of waist slab with suitable arrangement as per approval of engineer-in charge. including carriage of materials upto all leads and lifts.
Constructing manhole with R.C.C top slab in 1:2:4 mix in 1 cement : 2 sand : 4 graded stone aggregate 20mm nominal size) foundation concrete1:4:8 (1cement : 4 sand : 8 graded stone aggregate 40mm nominal size) inside plastering 15mm thick with cement mortar 1:3 (1cement 3 sand) finished with a floating coat of neat cement and making channels in concrete 1:2:4 mix (1 cement : 2 sand : 4 graded stone aggregate 20mm nominal size) finished smooth complete including curing and testing: including carriage of materials upto all leads and lifts. (a) Inside size 800mm x 800mm and 500mm deep including precast RCC manhole Cover and frame of required shape and approved quality HD 20 Circular shape 560 mm internal diameter ( heavy duty test load 20MT as per IS 12592 Part I & II ) With 230mm thick walls of brick masonry using common burnt clay building bricks in cement mortar 1:3 (1 cement : 3) including carriage of materials within all leads and lifts
Inside size 800mm x 800mm and 1000mm deep including precast RCC manhole Cover and frame of required shape and approved quality HD 20 Circular shape 560 mm internal diameter ( heavy duty test load 20MT as per IS 12592 Part I & II ) With 230mm thick walls of brick masonry using common burnt clay building bricks in cement mortar 1:3 (1 cement : 3) including carriage of materials within all leads and lifts
Providing and fixing to wall ceilling and floor galvainised mild steeel tubes(medium grade)tube fittings and clamps including making good the wall including carriage of material within all leads and lifts. (a) 15 mm nominal bore. including carriage of materials upto all leads and lifts.
20 mm nominal bore. including carriage of materials upto all leads and lifts.
25 mm nominal bore. including carriage of materials upto all leads and lifts.
Making connection of galvainised steel distribution branch with galvainised mild steel main 15mm to 40mm nominal bore by providing and fixing Tee including cutting and threading the pipes complete including carriage of material within all leads and lifts.
Providing and fixing high pressure PVC 4.5 kg/sqm pressure spigot and socket, waste and ventilating pipes ISI marked including fixing with approved adhesive etc. complete 110 mm dia.including carriage of materials upto all leads and lifts.
Providing and fixing high pressure PVC 4.5 kg/sqm pressure spigot and socket, waste and ventilating pipes ISI marked including fixing with approved adhesive etc. complete 150 mm dia including carriage of materials upto all leads and lifts.
Providing and fixing PVC accessiries ISI marked including fixing with approved adhesive etc. complete. including carriage of materials upto all leads and lifts. (a) Plain bend 110 mm nominal size. including carriage of materials upto all leads and lifts.
(b) Door bend 110 mm nominal size. including carriage of materials upto all leads and lifts.
© Plain Tee 110 mm nominal size. including carriage of materials upto all leads and lifts.
(d) Door Tee 110 mm nominal size. including carriage of materials upto all leads and lifts.
Providing and fixing pvc cowl 110mm dia including carriage of materials upto all leads and lifts.
Providing and fixing PVC floor trap ISI marked of self cleaning design including fixing with approved adhesive, cost of cutting and making good the wall and floors etc. complete. 110 mm X 90 mm including carriage of materials upto all leads and lifts.
Providing and fixing white vitreous china pedestal type water closet one peice (European type W.C. pan) with seat and lid, 10 litre low level white vitreous china flushing cistern with GI inlet connections ,PVC connection pipe 30cm length ,seat and cover and zet and P or S trap including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required :W.C. pan with ISI marked white solid plastic seat and lid
Providing and fixing wash basin including with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm PVC waste of standard pattern,PVC connection pipe 30cm length , concealed and 15mm CP stop cock including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Flat back wash basin size 550x 400 mm with single 15 mm C.P. brass pillar tap and stop cock including carriage of material within all leads and lifts.
Providing and fixing viterous china pedestal for wash basin complete recessed at the back for the recption of pipes and fittings including carriage of materials upto all leads and lifts.
Providing and fixing 100m sand cast iron grating for gully,foor or Nahani trap including carriage of material within all leads and lifts..
Providing and fixing 600x450mm bevelled edge mirror of superior glass mounted on 6 mm thick AC sheet or plywood sheet and fixed to wooden plugs with CP brass screw and washers including carriage of material within all leads and lifts.
Providing and fixing CP brass towel rail complete with CP brass brackets fixed to wooden pluges with CP brass screws 600x20mm including carriage of material within all leads and lifts.
Providing and fixing CP brass bib tap with capastan head 15 mm dia. Wieght not less than 500 gram including carriage of material within all leads and lifts.
Providing and fixing CP stop cock 15mm dia Wieght not less than 500 gram including carriage of material within all leads and lifts.
Providing and fixing brass full way valve with wheel including carriage of material within all leads and lifts. ( 15mm nominal bore including carriage of materials upto all leads and lifts.
20mm nominal bore including carriage of materials upto all leads and lifts.
25mm nominal bore including carriage of materials upto all leads and lifts.
Providing and fixing GI or MI union including carriage of material within all leads and lifts. (a) 15mm nominal size including carriage of materials upto all leads and lifts.
(b) 20mm Nominal size including carriage of materials upto all leads and lifts.
© 25mm Nominal size including carriage of materials upto all leads and lifts.
Providing and fixing charomium plated brass soap dish with C.P.brass brackets fixed to wooden cleats with C.P. brass screws including carriage of material within all leads and lifts.
Providing and fixing statinless steel kitchen sink of approved standard ISI make with drain board and C.P. waste with with C.I. or M.S. brackets painted white including cutting holes in walls and making good the same but excluding fittings 610 x460 mm with bowl depth 200 mm. including carriage of materials upto all leads and lifts.
Providing and fixing PVC water storage tank Four core 1000 ltr net capacity complete in all respect. weight not less than 22 kg. including necessary fittings including carriage of material within all leads and lifts.
Excavation in earth work and banking in 20 cm. layers including breaking clods, ramming and dressing ground for the purpose of making embankment or filling up ground depressions upto al lead and lift including carriage of materials upto all leads and lifts.
Pohu Lal Bhardwaj
Sushil Kumar Govt Contractor
Jai Ambay Builders
Shallu Malik Govt Contractor
Ravinder Kumar
Sohan Singh Govt. Contractor
Harsh Jaswal
Suresh Kumar
Sushant Puri
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .