PROVN OF CERTAIN REV WORK AND SPL REPAIR TO MAIN GATE AT 235 COY ASC(SUP)AT PATTAN UNDER GE 969 EWS

Amount

Surface dressing n exc 15 cm deep and getting out soft/loose soil, Complete all as specified and as directed.

Excavation in trenches in any type of soil, n exc 1.5 M wide and n exc 1.5 M deep for foundation, etc or for shafts, wells, manholes etc n.exc 10 Sqm on plan and n.exc 1.5m in depth and getting out in any type of soil, Complete all as specified and as directed.

M&L Hardcore of guage Broken stone or boulders exc 63mm but n exc. 150 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered surface, Complete all as specified and as directed.

M&L Plain Cement concrete Type D-2, 1:4:8 (40mm graded aggregate), in foundation, filling and mass concrete, Complete all as specified and as directed.

M&L Plain Cement concrete Type B-2, 1:4:8 (40mm graded aggregate), in foundation, filling and mass concrete, Complete all as specified and as directed.

M&L Plain Cement concrete Type C-2, 1:3:6 (40mm graded aggregate), in foundation, filling and mass concrete, Complete all as specified and as directed.

M & L for brick work with sub class 'B' bricks (old sizes) straight or curved on plan exceeding 6 mtr mean radius built in CM 1:6, Complete all as specified and as directed.

M & L for Providing precastce cement concrete1:2:4 B1(Using 20 mm coarse aggregate) in win- dow or door cills, lintels, bressumers, steps, quoin blocks (for use with masonry), string courses, copings. kneelers, apex stones, pier caps, columns, posts, boundary pillars, bed plates, pintle blocks, ancho-rage blocks, onders (for stone walling).corbels, brackets,etc. (of any section indicated), with plain fair ces,including chamfers,weatherings,throat- ing etc. andsetting in mortarcomplete withjoints to match, Complete all as specified and as directed.

M&L for cement concrete 1:2:4 Type B0 (Using 12.5 mm coarseaggregate) and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height,copings, kneelers, apex stones,bed plates, kerbs not provided for in Item 04028, water troughs and the like includingweathering, slightly roundedor chamfered angles and throating, Complete all as specified and as directed.

Mild steel TMT bars 10mm mm dia and over, cut to length, bent to shape required including cranking , bending and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips, Complete all as specified and as directed.

M & L For Rendering 15 mm thick in cement and sand mortar 1:4 on fair faces of brick/stone masonary surfaces or other than fair fae of brick work or on one side of lathing with using intergral waterproffing compound @3% by weight of cement including finishing the surface even and smooth without using extra cement complete all as specified and directed. (WPC will be measured separately)

M & L Rendering 10 mm thick in cement and sand mortar 1:4 on fair faces of brick work or cement concrete surfaces with including finishing the surface even and smooth without using extra cement, Complete all as specified and as directed.

Preparation of newly plastered surfaces of walls and applying two coats of cement base paint, Complete all as specified and as directed.

M&L for preparation of new surface and applying three coat of white washing on old plastered surface of walls complete all as specified and as station policy or directed by engr-in-charge.

Framed brackets of angles or tees, rafter purlens with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc.. n exc 10 kg each brackets, conforming to Fe.290.Gde-E-165 (Brackets over 10 kg each to be measured under 'Structural Steel')

M & L for Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensilestrength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as etc, Complete all as specified and as directed.

M&L Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, Complete all as specified and as directed.

M&L Bands, straps, supports or stays for rainwater, ventilating pipes, ncluding bolts, hooks (stay), hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165, Complete all as specified and as directed.

M & L Preparation of new steel surfaces of any description over 10 cm width or girth and priming with red oxide zinc chrome and painting with two coats of synthetic enamel paint on Steel sheeting as in roofing, Complete all as specified and as directed.

Returning filling in incl spreading leveling, watering and well ramming in layers n exc 25 cm, Complete all as specified and as directed.

Removing of excavated soil not exceeding 50m and depositing where directed at a level not exc 1.5 M above the starting point, Complete all as specified and as directed.

M & L 75mm thick PCC (1:3:6) type C-2 using 20mm graded stone aggregate as in plinth protection and similar works including finishing the surface of concrete topping even & fair, without using extra cement, Complete all as specified and as directed.

M&L 75 mm thick Cement concrete type D-2 1:4:8 (40mm graded aggregate) as in sub base of flooring/hard standing, Complete all as specified and as directed.

M&L for machine pressed precast interlocking paver block any shape ans size confirming to -15658 - 2006 of 60mm thickness, M-35 Grade, laid on sand chshioning,with frey cement and no pigment, Complete all as specified and as directed.

M&L sand filling under or in paver blocks and consolidation, Complete all as specified and as directed.

M&L Providing cement concrete B1 1:2:4 ( 20 mm graded aggregate) in kerb rounded or chemfered on edges, Complete all as specified and as directed.

M&L for walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in cement mortar 1:6, Complete all as specified and as directed.

M&L for rendering 15 mm thick in CM 1:4 over stone wall surfaces and finished even & smooth without using extra cement, Complete all as specified and as directed.

Cement concrete 1:2:4 type B-1 (using 40mm graded crushed stone aggregate) as in surface channels, drains etc, Complete all as specified and as directed.

Extra for forming fair faces (finished) drain of channel 30 cm inner girth in cement concrete using extra cement including forms moulds mitered stopped end etc, Complete all as specified and as directed.

Construction of LLDPE septic tank for 20 user conventional type, exe inordinary siol foundation in PCC 1:2:4 brick work in CM 1:4 RCC slab covers including including RCC precast manhole cover having vent shaft and sludge chamber etc, Complete all as specified and as directed.

M&L for PCC (1:4:8) type D2 using 40mm graded stone aggregates as in bed to drain pipes including packing under and haunching against the sides of pipes after these are laid tested for 150 mm bore of pipes, Complete all as specified and as directed.

Soakage wells excavation, in any type of soil, foundation in PCC 1:3:6, walls of honey combed masonry with top ring of M25 concrete including intercepting chamber and screen chamber made of Brick masonary in CM, RCC cover slab in M25/ SFRC cover, interconnecting pipes of RCC/DWC complete filled with brick bats of size 1.20 m dia x 4.50 m deep.complete all as specified and shown in drg No.CESZ/TD-1080/2011

Supply only integral water proofing compound, Complete all as specified and as directed.

M & L for hardcore of gauge not exceeding 63 mm of broken stone, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to a true surface, Complete all as specified and as directed.

S & F Chequered cement concrete tiles 30 cm x 30 cm x 25 mm thick, with grey cement and pigments, set, jointed and pointed in neat cement slurry in floors including screed bed 15mm thick comple in CM 1:4, complete all as specified and as directed.

M & L cement concrete type B-1, 1:2:4 (using 20mm graded aggregate) as in roof kerbs or mud stops, rounded or chamfered on edges, Complete all as specified and as directed.

M & L brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in built in CM 1:4, Complete all as specified and as directed.

M & L 25 mm thick PCC 1:2:4 type B-1, using 20 mm graded stone aggregate, including finishing surface of concrete topping even and rough as sub base, Complete all as specified and as directed.

M & L Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exc 0.06 sqm but n.exc 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in cement and sand mortar 1:4, Complete all as specified and as directed.

M & L Glazed ceramic tile 450 x 300 x 6-7mm thick (coloured) on vertical surfaces such as skirting, dados etc set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles over and including 10 mm thick plaster in cement and sand mortar 1:4, Complete all as specified and as directed.

S & F Roof trusses, trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc, Complete all as specified and as directed.

S & F Solid PVC Door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube, complete all as shown in drawing of relevant item in MES, schedule Part-II , 2010, Complete all as specified and as directed.

S & F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement complete all as shown in drawing of relevant item, complete all as specified and as directed.

S&F steel ventilators with top hung shutter including hinges steel peg stay, squares no.exc 0.50 Sqm in each pane, Complete all as specified and as directed.

S & F Butt hinges, 100 mm long medium weight, cold rolled mild steel, ISI marked, Complete all as specified and as directed.

S & F 150mm long aluminium anodised, barrel tower bolt ISI marked, Complete all as specified and as directed.

S & F 150mm long aluminium anodised cast type alumiinium handle SI marked, Complete all as specified and as directed.

S & F for PVC (SWR) floor trap, plain with grating including jointing with solvent cement 75 mm bore, Complete all as specified and as directed.

S & F for PVC (SWR) gully trap, plain with grating including jointing with solvent cement 110 mm bore, Complete all as specified and as directed.

S&F vitreous chine wash down water closet pan ( Pedestal pattern) white or coloured excluding flushing cistern and flush pipe, including seat cover incl provision of concrete/ white cementing and P or S trap in repairs, Complete all as specified and as directed.

S&F Water closet (Orrissa pattern) complete including provision of lime concrete bedding including vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) in repairs, Complete all as specified and as directed.

S&F vitreous china urinal, Half Stall type, white (excluding flusing cistern, flush pipe and waste pipe, Complete all as specified and as directed.

S&F in repair vitreous china wash basin, white flat back size 550x400 mm plug, porcelain stopper and incl brackets with waste fittings and connection pipe etc including pedestal, Complete all as specified and as directed.

S&F Tubular towel rail brass chromium plated 20mm dia D-Type 60cm long between flanges, including brackets and fixed to walls, Complete all as specified and as directed.

S & F PVC connection 15 mm size, of length 450 mm, with PTMT nuts supplied and fixed, Complete all as specified and as directed.

S & F 110 mm bore PVC (SWR) pipe single sokete any length with rubber ring joints fixed in wall, Complete all as specified and as directed.

S & F 110 mm bore PVC (SWR) pipe single sokete any length with rubber ring joints laid in trenches or in floors, Complete all as specified and as directed.

S & F 75mm bore PVC (SWR) pipe single sokete any length with rubber ring joints laid in trenches or in floors, Complete all as specified and as directed.

S & F 110mm bore PVC (SWR) bend, plain including jointing with solvent cement, Complete all as specified and as directed.

S&F 100mm bore PVC (SWR) 'T 'any radius, Complete all as specified and as directed.

S & F 110mm bore PVC (SWR) vent cowl, plain including jointing with solvent cement, Complete all as specified and as directed.

S&F 15mm bore Bib taps, fancy type chromium plated with crutch or butterfly handle, screwed down, serewed for iron pipe or for brass ferrule and fixed, Complete all as specified and as directed.

S & F Swivel shower of PTMT any colour for fixing with 15mm pipe. (Minimum weight 40gms), Complete all as specified and as directed.

S&F 15mm bore Angle valve, fancy type chromium plated high pressure with crutch or butterfly handle screwed both ends for iron pipe, Complete all as specified and as directed.

S&F mild steel framed work such as grills, frame work of water taks FE 290 Gde E-165, Complete all as specified and as directed.

S&F 3 layer PPR pipes 25mm dia abore SDR 7.4 & SDR 11 UV staablished and antimicrobial welded having thermal stability for hot and cold water, Complete all as specified and as directed.

S&F 3 layer PPR pipes 20mm dia abore SDR 7.4 & SDR 11 UV staablished and antimicrobial welded having thermal stability for hot and cold water, Complete all as specified and as directed.

S&F 1000 Ltrs capacity Rotational moulded polyethylene in white coloured three layered ISI marked water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position, Complete all as specified and as directed.

S&F 25mm PPR Gate valve inserted as per requirement of site, Complete all as specified and as directed.

S&F 20mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (min weight 20mm-210 gms), Complete all as specified and as directed.

S & F soap dish chromium plated, fixed to plugs with chromium plated brass screws, complete all as specified and as directed.

M&L for granite (of any type) 20mm thick machine cut, beded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including, Complete all as specified and as directed.

S & F for 4 mm thick figured glass pin head ftype and glazing with oil putty in squares n.exc 0.5 sqm in each pane, Complete all as specified and as directed.

M & L precast RCC man holes cover in cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate, Complete all as specified and as directed.

Construction of LLDPE septic tank for 25 user conventional type, exe inordinary siol foundation in PCC 1:2:4 brick work in CM 1:4 RCC slab covers including including RCC precast manhole cover having vent shaft and sludge chamber etc, complete all as specified as per manufacturers instruction.

Soakage wells excavation, in any type of soil, foundation in PCC 1:3:6, walls of honey combed masonry with top ring of M25 concrete including intercepting chamber and screen chamber made of Brick masonary in CM, RCC cover slab in M25/ SFRC cover, interconnecting pipes of RCC/DWC complete filled with brick bats of size 1.20 m dia x 3.00 m deep.complete all as specified and shown in drg No.CESZ/TD-1080/2011

M&L for RCC M-25 Design Mix using 20 mm graded stone aggregate in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc. basement slabs and mass concrete, Complete all as specified and as directed.

M&L for RCC RCC M-25 Design Mix using 20 mm graded stone aggregate in columns, pillars, piers, posts and struts, Complete all as specified and as directed.

Demolition of Brickwork or stone/ boulder masonry, built in lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles built in cement motor, Complete all as specified and as directed.

M&L for form work to sides of flat, rough finished surfaces of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams and similar work; vertical to batter, Complete all as specified and as directed.

M&L for form work to sides of square, rectangular or polygonal, rough finished surfaces of concrete of pillars, posts, struts, piers, columns and stanchions, Complete all as specified and as directed.

M&L for mild steel TMT bars 5 mm dia and over up to and including 10 mm dia in stirrups, spacers and binders, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia, Complete all as specified and as directed.

S&F rolled mild steel of grade Fe-290 (Grade E-165) in framed work as in doors or gates of angle or other section with gusset plates, rails braces, etc. complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete.

M&L for 20 MM thick Granite ( of any type) (table rubbed and polished ) in steps jambs ,pillars, window cill, cooking plateform and like in cement mortar 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite.over 10 mm thick rendering on concrete surface in CM (1:4).

Removing excavated ( soil) / demolished material exc 250 m but not exc 500 m deposited, Complete all as specified and as directed.

S&F aluminium composite panel 3 mm thick of Euro bond ALSTONE with necessary steel frame work as in gates, pillar projectins etc including taping joints complete all as specified and directed and as per manufactures instructions.

Supply & Fix Brass letters 30cm height ans 30cm in letter width as in embalum wall fixing with all necissary fittings, drilling, fixing with hexogonal bolts, finish as spcified including brass polishing, glazed finish and fix, Complete all as specified and as directed.

M&L for point wiring in PVC casing caping with 1.5 Sqmm size multi stranded FRLS copper conductor cable 1.5 Sqmm including clamps, screws guttier/plug etc PVC unsheathed cable into and including wooden board with bakelite sheet and PVC insulated FRLS cable of size 1.5 Sqmm as earth continuity conductor.

(a) One light point/fan point/Ex fan point controlled by one 5 Amps switch one way

M&L for point wiring in PVC casing caping with 2.5 Sqmm size multi stranded FRLS copper conductor cable including clamps, screws guttier/plug etc PVC unsheathed cable into and including wooden board with bakelite sheet and PVC insulated FRLS cable of size 2.5 Sqmm as earth continuity conductor.

S&F switch piano Flush type, single pole, one way 6 amp 240 volts, complete all as specified and as directed

S&F switch piano Flush type, single pole, 15 amp 240 volts, complete all as specified and as directed

Supply and fix ceiling rose 3 terminal / PVC/ Polycarbonate, isolated body all as specified and directed.

S&F in repairs Distribution Board, SPN 8 Way, Single door complete all as specified and as directed.

S & F in repairs MCB,SPN 32 Amps 240 Volts C curve, complete all as specified and as directed.

S & F MCB Single pole 6-32A Amps 240 Volts C Curve, complete all as specified and directed.

S & F LED light fitting 1x9W/1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size, complete all as specified and directed.

Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose, complete all as specified and directed.

S&F Lamp Holder, PVC/ Polycarbonate type with back plate suitable for batten fitting, complete all as specified and directed.

S&F LED Lamp 15 W, complete all as specified and directed.

Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10 sq mm 2 core, complete all as specified and directed.

Supply and fix exhaust fan made of plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep/brisk air fan of size 300 mm sweep, non matallic, complete all as specified and as specified and as directed.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10 sq mm 2 core, complete all as specified and directed.

Excavation in trenches, n. exc 1.5 m wide and n.exc 1.5 m in depth for laying of XLPE UG cables and getting out in soft/ loose, complete all as specified and directed.

Returning, filling in trenches including spreading, leveling, watering and well ramming in layers not exceeding 25 cm, complete all as specified and directed.

Removing excavated materials to a distance not exceeding 50 metre and depositing where directed at a level not exceeding 1.5 metre above the starting point, complete all as specified and as directed.

Supply and spreading clean dry sand in trenches for cushioning all as specified for cable protection, complete all as specified and directed. (Note the punned down thickness shall only be measured)

Supply and laying sub class 'B' bricks laid across the cable for cable protection, complete all as specified and as directed.

S&F GI light grade tube of size 40 mm dia for laid in trenches/ wall for protection of cable, complete all as specified and as directed.

Note:- Schedule of credit Rs 47,711.00 will be deducted from total amount quoted while accepting the bid. Details of schedule of credit is given in tender documents.

M/S M.S. BUILDERS (BID ID -3301547)

M/s Shabir Ahmed Mir and Bros (BID ID -3309957)