REPAIR/RESURFACING OF ROAD ROAD FURNITURE AND ROAD MARKING AT BEG AND CENTER UNDER AGE B/R (PROJECT) IN GE (CENTRAL) KIRKEE

Amount

M & L for repairs to pot holes any depth n,exc 1 sqm each including sweeping free from dust and mud or water, scoring sunken surfaces in roads etc, cutting around edges atleast 25mm in depth, making good by applying tack coat @ 5Kg per 10Sqm of paving bitumen (VG-30), putting in premix bituminous macadam well rammed and sealed with binder 9.8 Kg per 10 Sqm of paving bitumen, blinded with o.09 cum of stone chippings 6.3mm size and again well rammed(including supply of premixed macadam binder and chippings) depth of pot holes exceeding 30mm complete all as specified and as directed by Engineer-in-Charge

Scarifying and picking gravelled macadam or bituminous macadam surfaces depth area not exceeding 400 Sqm and in exc 50mm and n exc 100mm in depth and removing the same to a distance n exc 50m and staking complete all as specified and as directed by Engineer-in-Charge

M&L for150mm thick (compacted thickness) WBM in two layers of 75mm each with coarse aggregate of grading 2 (63 to 40mm size) or of grading 3 (50 to 20mm size) using granite, trap or basalt stone of grading spread and rolled and consolidated to gradient and camber required including rolling by using mechanical power road roller of 8 to 12 tonne cpacity complete all as specified and as directed by Engineer-in-Charge .

Dotto- all as per item No 3 above but except materials. Note: Serviceable material obtained from item No 2 shall be used under this item.

M &L Preparing unsurfaced WBM surface by brushing with wire brush for removing caked mud etc., sweeping with brooms, and finally fanning the cleaned surfaces with gunny bag to remove all loose dirt etc and for applying evenly a tack coat with bituminous emulsion RS-1 @ 10 kg per 10 Sqm with sprayer over existing surface etc complete all as specifiedand as directed by Engineer-in-Charge.

M&L for premixed bituminous macadam with binder content @ (VG-30) 4% by weight of total mix (Job Mix) laid / rolled with 8 to 12 tonne power roller and compacted to required gradient and camber (consolidated thickness 75 mm or less as per site requirement of site ) complete all as specified and as directed. Note :- The contractor quoted the rate shall be deemed to include the follwing elements:- (i) The contractor shall get the mix design done through Govt approved lab and shall get the same approved from GE before incorporating in the work. (ii) Contractor shall submit the authenticated weigh batch receipt for every load of materials brought at site duly marked vehicle Number.

Preparation of existing black top surfaces by brushing with wire brushes and removing caked mud etc sweeping with mechanical broomer and finally fanning the cleaned surface with gunny bags to remove all loose dirt complete all as specified and directed by Engr-in-charge.

M&L for applying evenly a priming/tack coat bituminous emulsion RS-1 @ 5 kg per 10 Sqm with sprayer over bituminous macadam etc. all as specified and directed by Engr-in-charge.

M&L for bituminous premixed asphaltic semi-dense concrete using paving bitumen (VG-30 grade), 30mm thick (Consolidated thickness) using binder content @ 5.5% by weight of total mix (Job mix), using mechanical paver rolled with 8 to 12 tonne power roller & compacted to required camber and gradient complete complete all as specified and directed. Note :- The contractor quoted the rate shall be deemed to include the follwing elements:- (i) The contractor shall get the mix design done through Govt approved lab and shall get the same got approved from GE before incorporating in the work. (i) Contractor shall submit the authenticated weigh batch receipt as per load material in site duly marked vehicle Number.

S&F in repairs Cat Eye ABS body with scratch and abrasion resistant micro prismatic polycarbonate and ultrasonically welded lens, temperature resistant body and lens, size 90mm x 110mm x 17mm (Ref/Yellow colours) complte all as directed of Make M/S Kranti Idustries, F-44 MIDC, Satpur, behind Sunil transport, Nashki/M/S Road safety Mark, 7, Sanjay Gandhi Nagar, Nehru road, near domestic Airport, behin Vile parle East Police Station, Vile Parle East, Mumbai/M/S MS Industries, G-20, MIDC Satpur, Nasik - 422005

M&L Moorum/Red bajri, spread, rolled and consilidated to required gradient and camber (Spread thickness 100mm (average) all as specified and directed by Engr-in-Charge

M&L for preparation of New/existing black bituminous road/concrete surface and painting lines dashes (continuous/interrupted), arrows,letters etc on road 2.5 + 0.5mm thick and n.exc 10cm wide with one coat of hot applied white /golden/yellow auto retro-reflective thermoplastic road marking paint with reflectory glass beads on bituminous road all as specified in clause 803.40 of MOSRT&H specification over a coat of self primer using special applicator machine as per IRC pattern including cleaning of road surface free from dust & moisture and putting in duly mixed with 8% mica sign special applicatore machine complete all as specified and as directed by Engineer-in-Charge Make of paint : CMS Bombay / Shivalik Prime-Chandigarh / Ritco / Meerut / SN Industries-Delhi) and as approved by GE

S & F in repairs retro-relective sign board of size 6'x4' made out of ACP sheet 5mm thick and fixed on SS hollow tubular of 40mm dia (304 series) the board shall be sheated with reflective tape of blue/green colour, letter shall be written both sides in white colour writing of approved colour (Upto 60 letters on each side of board) of reqd shape and size as approved by GE and the sign board shall be supported on 02 Nos post of 60mm dia SS pipe 304 series 4 mtr long duly welded or fixed on SS nut long MS angle iron welded to the bottom of SS Pole incl necessary excavation and earth work in any type of soil, returning fillling and remove of surplus soil. (SS poles with sign board shall be fixed with cement concrete (1:3:6) type C-1 of required size of foundtion not less than 300x300x600mm size) complete all as specified and directed by Engr-in-Charge

Demolition of stone slabs and tiles of any description or thickness in floors,approns etc laid bedded and pointed in any mortar

S&F hand cut kota stone slab flooring 20-25mm thick laid over cement screed base of 20mm thick in CM 1:6 laid and jointedd with grey cment slurry mixed with pigment to match the shade of the slab inclduing rubbing and polishing complete all as specified and as directed by Engineer-in-Charge

M&L for 80mm thick machine pressed precast concrete interlocking paver block refelctive type coloured, any shape and size conforming to IS-15658-2006 of M-35 grade laid on 50mm thick crushed stone sand filling under floors incl dismantling old tiles complete all as specified and as directed by Engineer-in-Charge

M&L for coloured glossy finish chequered cement concrete tiles of size 30cm x 30cm x 25mm thick with grey cement and pigment, set jointed and pointed in neat cement slurry in floors over and including 15mm thick screed bed in CM 1:6 complete all as specified and as directed by Engineer-in-Charge

M&L for cement concrete in Sub floor, Sub Base, Base and paving etc 100mm thick type B2 1:2:4 (40mm graded aggregate) incl demolition in any position n.exc 15cm thickness. complete all as specified and as directed by Engineer-in-Charge

Aadarsh Construction

R K Enterprises

Sunshine Ventures

M/s ESS KAY Construction