Provn of widening of road of Thimaya park under GE East Jalandhar Cantt

Amount

Surface excavtion not exceeding 30 cm deep and averaging 15 cm deep in soft/loose soil and getting out complete all as specified and directed.

Rolling and consolidating road formation surfaces in cutting with 8 to 12 tonne capacity power road roller, watering as necessary including filling in hollows and depressions and consolidating to the required level, gradient and camber complete all as specified and directed.

Soling (or sub base), 150mm thick with broken boulders or quarried stone (sand stone or quartzite) including filling of interstices, surface formed and rolled and consolidated to required gradient and camber with power road roller of 8 to 12 tonne capacity complete all as specified and directed.

Material & Labour for water bound macadam 100mm thick (compacted thickness) with crushed stone aggregates of grading 2 (90 to 40 mm size) granite laid, spread and rolled with 8 to 12 tonne power road roller and consolidating to required camber and gradient complete all as specified and directed.

Material & Labour for preparing unsurfaced water bound macadam surfaces by brushing with wire brushes for removing caked mud etc sweeping with brooms and finally fanning the cleaned surfaces with gunny bags to remove all loose dirt and applying evenly a priming/tack coat with paving bitumen VG-10 at the rate of 10 Kg per 10 Sqm of road surface, laying, rolling, consolidating 40 mm thick (consolidated thickness) bituminous premixed asphaltic semi dense concrete with 5.5% binder content (VG-30) by weight of total mix laid with mechanical paver roller and compacted to required camber and gradient and rolled with pressure roller and 8 to 10 tonne power road roller to achieve a uniform smooth surface with Pneumatic vibratory roller complete all as specified and directed. Note: Mix shall be prepared in Hot mix plant as per job mix formula obtained from authorised testing lab and laying will be done by mechanical paver.

Material & Labour for preparing existing black top surfaces by brushing with wire brushes for removing caked mud etc sweeping with brooms and finally fanning the cleaned surfaces with gunny bags to remove all loose dirt and applying evenly a priming/tack coat with paving bitumen VG-10 at the rate of 5 Kg per 10 Sqm of road surface, laying, rolling, consolidating 30 mm thick (consolidated thickness) bituminous premixed asphaltic semi dense concrete with 5.5% binder content (VG-30) by weight of total mix laid with mechanical paver roller and compacted to required camber and gradient and rolled with pressure roller and 8 to 10 tonne power road roller to achieve a uniform smooth surface with Pneumatic vibratory roller complete all as specified and directed. Note: Mix shall be prepared in Hot mix plant as per job mix formula obtained from authorised testing lab and laying will be done by mechanical paver.

M&L for repair to pot holes any depth not exceeding 1 Sqm each including sweeping free from dust and mud, or water scoring sunken surfaces in road path etc cutting around edges, at least 25mm in depth and making good by applying tack coat using paving bitumen VG-10 @ 5 Kg per 10 Sqm, putting in semi dense asphaltic concrete well rammed and sealed with binder using paving bitumen @ 9.8 Kg per 10 Sqm blinded with 0.09 cum stone chipping 6.3mm size and again well rammed (including supply of premixed macadam binder and chippings) and compacted to required gradient with 8 to 12 tonne power road roller, depth of pot hole exceeding 30mm complete all as specified and directed.

Material & Labour for Continuous brick edging with width equal to the width of brick of whole sub class 'B' laid dry on end vertically to sides of roads, including necessary excavation, embedding bricks in the ground to depth as required, tempering around bricks and removing surplus spoil to a distance not exceeding 50m complete all as specified and as directed.

Material & Labour for providing and marking broken centre line /side lines / Zebra lines, dashes, arrows etc. on road pavement and the like of any description and width with thermoplastic paint hot applied with machine conforming to BS-3265 and according to the specification laid down by IRC and MOST (Ministry of Surface Transport) specification 2001 (4th revision) complete all as specified and directed.

Supply and fixing high quality ABS plastic speed bump 1000mm (04 Pieces) x350x50mm,fixing on road with two highly reflected reflectors moulded in HDPE material welded with ABS plate having resistance capacity to withstand severe impacts complete all as specified and directed by Engineer-in-Charge. Make : Dark Eye Cat Part No. DA-1009 or equivalent of 3M/Shakti.

Supply & fix in repair road stud two way reflective of size 100mm x 110mm x 20 mm made up of plastic body and available in colour red, amber, white etc complete all as specified and directed. Make : Dark Eye Cat Part No. DA-52 or equivalent of 3M/Shakti.

Supply & fix Double legged informatory board sign boards (two boards) of size 1.50 m x 1.20 m fixed on frame of stainless steel round pipe 50 mm dia (304 grade) outer frame all around of stainless steel pipe 80mm dia (304 grade) to be provide alongwith the round pipe. The boards are to be made of high intensity unmettalised prismatic grade retro- reflective sheeting 400 micron thick of Make Avery Dennison/ 3M duly processed on 3 mm thick aluminium composite panel conforming to IS 736 with heat lamp vacum applicator, etched treatment, hand squeexed roller applicator machine. The letter of any description, size, cutout, logos, formation signs etc as directed and shall be of 400 micron thick of any colour to be cut with high pressure compurised cutting plotter or with high quality digital printing with lamination to have longer life and duly fixed on the sheet base high intensity grade unmetallied prismatic grade white sheeting. The aluminium composite panel duly processed as above shall be fixed on to the frame back to back with aluminium snap head rivets in very neat manner. These boards are to be fixed on vertical posts made of 50mm dia stainless steel pipe of grade 340 16 gauge , glossy finish 3mm long with 50mm dia SS pipe and MS plate 3mm thick duly welded at bottom of pipes includig 02 Nos decorative bowls of SS 304 grade to be provided at the top of 50mm dia SS pipe.Total height of pipe shall be 3.0 m above the ground level and 0.45 m to be embedded and grouted in ground in cement concrete (1:2:4) type B-1 using 20 mm graded stone aggregate including necessary excavation and earth filling, removal of surplus excavated material and making good the surface complete all as specified. The Sign board shall be fabicated according to IRC - 67-2010 (revised specification) and as per MORTH specification clause 801.1.

Dismantling of brick edging laid dry to sides of roads complete all as specified and directed.

Motorway Constructions