Loading, transportation and filling of ash in the unused/abandoned open mines Trench T-3 Patch of Sharda OC mines located near village Bakho Tehsil- Burhar, Dist. Shahdol (MP) including other related works as per MPPCB norms at ATPS, Chachai.

Ash Excavation and Loading :- Excavation and loading of ash from ash dyke in vechicle, including construction and maintanence of temporary roads on ash dyke, by mechanical means including prevention of fugitive emission of area complete including all leads and lifts, all other incidental charges such as water sprinkling, cost of labour, equipment and material etc. complete as per specifications, drawing and direction of Engineer-in-charge and guidelines/ specifications of MoEF&CC/MPPCB & MOU of SECL Sohagpur area for ash handling. (Note:- In case ash is proivded from ash silo by MPPGCL, no payment towards this item will be made.)

Transportation and Unloading :- Transportation of ash from ash dyke in closed/covered container or any other methods to prevent air pollution during transportation from ash pond to abandoned mine/low lying area Trench T-3 patch located near village Bakho, Tehsil - Burhar, Distt- Shahdol (M.P.) including unloading, watering if required during unloading of ash through sprinklers or other means to prevent fugitive emission of ash. All works are to be carried out as per norms of MOEF&CC, MP Pollution control Board, MOU of SECL Sohagpur area and GoMP. Quoted rates must be inclusive of cost of labour, equipment and material etc. required to complete the work in all respect as directed by Engineer-in-Charge. Total lead of 14.41 KM.

Filling and Compaction of Ash i/c dozing:-Ash work in filling with dozing and compacting by mechanical means to achieve maximum in–situ dry density 95% of MDD of the material found out as per I.S. 2720 (Part VII) at OMC, by use of suitable vibratory rollers with static weight 6 to 10 tonnes or as required, as per relevant specifications, including cleaning of area (where ash filling is to be done) by uprooting of all type of vegetation, grass, bushes, sapling etc. by any means and stripping of top layer of minimum 150 mm or to such depth as decided by the Engineer in charge, depending upon the quality of ash to be used in forming ash filling etc. The work shall include disposal of all unsuitable material and stacking of suitable earth/soil (to be used later for top soil cover over ash fill) outside the working zone/area, dewatering, all man and machinery, providing barricading, fencing and construction of 15 feet high wind breaking wall of G.I. sheet all along the dumping site, suitable dust supression system to prevent fugitive dust emission, construction of temporary approach/ haul road etc. complete with all leads and lifts as per tender specifications/ drawings and direction of Engineer-in-charge and compliance of relevant guide lines/ specifications of MoEF&CC,MPPCB & MOU of SECL Sohagpur area for fly ash handling and filling in low lying areas.