SMART PERIODICAL AJMER AND NASIRABAD MIL STATION UNDER GE NASIRABAD

M & L for complete removal of existing treatment on wall/roof projections including facia, cornices etc at any height by scrapping with mechanical sander(having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 80 grit having dia of 7"/9" to make free from dust, loose paint etc by skilled labour complete all as specified and directed.

M & L for water proof cement based putty @1kg (undiluted) per sqm of average thickness 2mm over the plastered /old prepared painted surface of wall and sanding of the putty surface with mechanical wall sander (having mechanical vacuum mecghanism) having RPM not less than 1500, sanding pad of 240 grit or above to make the surface :- Step 1: Mix the putty powder by adding water as manufacturer's instruction and mix it with putty mixer with the mixing capacity of min 2.5 kg putty per minute. Step 2: Apply the first coat of the prepared mixer with the help of fully automatic airless spray machine/manully of putty application finishing the surface even and smooth in level without any undulations. Step 3: Allow 6-8 hrs time to dry the putty surface.

M & L for one coat of acrylic water based exterior grade primer @ 0.9litre(undiluted)/ 10 sqm diluted with water in 1:1 ratio to be applied with fully automatic airless spray machine and allow 6-8 hours to dry the surface for painting of subsequent coats complete all as specified and directed.

M & L for water based premium acrylic smooth exterior emulsion of approved colour with silicon additive excellent dirt pickup resistance with low VOC less than 50, Antifungal/ Anti Algai properties in two coats not less than 1.79 litre(undiluted)/10 Sqm diluted with water as per manufacturer's instruction applied over primed surface with fully automatic airless spray machine of point application with a flow speed of minimum 1 litre per minute having a pressure of 3300PSI. Allow 6-8 hrs to dry the surface in between subsequent coats of paint complete all as specified and directed.

M & L for two coat of synthetic enamelled paint on old painted wood/wood based surface of any desription over 10cm width or girth incl preparation surfaces such as removing all splashes, drops, dirt and leaving premises in a clean state complete all as specified and directed

M & L for two coat of synthetic enamelled paint on old painted steel based surface of any desription over 10cm width or girth including preparation surfaces such as removing all splashes, drops, dirt and leaving premises in a clean state complete all as specified and directed

Taking down cement or cement lime plaster any description on brick or stone walls etc. including raking out joints, hacking for key, scrubbing down with water etc and rubbish off the premises complete all as specified & directed.

M & L cement plaster in two layers on brick /stone masonry surfaces or surfaces other than fair face of brick work, 1st layer 15mm thick in cement mortar (1:6) and 2nd layer 5mm thick in cement mortar (1:4) with WPC @ 3% by weight of cement, finished the surfaces even and smooth without using extra cement complete all as specified & directed. NOTE - WPC will measured and paid seperated as supply only.

S & F in repair 75 mm dia PVC(SWR) pipes single soketed in any length with rubber ring jointed, incl clamp with fittings fixed to wall, corner complete all as specified