ADDN/ALTN TO CERTAIN BLDGS BLDG No 9 OFFICER MESS 9/1 7/1 7/2 7/3 JCOs/OR LIVING ACCNS OR TOILETS AT KASTURBA ROAD LUCKNOW CANTT UNDER GE EAST LUCKNOW

Amount

Dismantling brick tiles or terracing tiles, single layer on roofs complete all as directed.

Demolition of mudphuska/cement concrete/cement mortar of any thickness, incl plastering & existing tarfelt (whether full thickness removed or part there of) including cleaning, washing down etc and removal from site at a distance exc 500 mtrs and not exc 1.5 Kilometer complete all as specified and directed.

M&L plain cement concrete 1:2:4 type B-1 (using 20 mm graded stone aggregate) on roof slab etc complete all as specified and directed.

M&L for rendering 10 mm thick in cement mortar 1:4 on fair face of brick work of wall/ roof surfaces mixed with water proofing compound (ISI marked) @ 2% by weight of cement or as per manufacturer’s instructions, finished even & smooth without using extra cement complete all as specified. incl mouldings, chamfers, splay srounded or coved angles, beads,grooves and rebate upto 10 cm in width or 15 cm in girth complete all as specified and directed. Note : - Water proofing compound shall be measured and paid separately under respective item.

Supply only Liquid water proofing compound (ISI marked) complete all as spesified and directed.

M&L for roof treatment with polymeric water proofing membrane as under :- (a) Applying bituminous primer conforming to IS 702-1988 @ 1.20 Kgs/sqm. (b) APP modified bitumenous membrane minium weight 3 kg/sqm and minimum 3 mm thick reinforced with polyester non wove fabric ( wt. not less than 150 gms/sqm) laid on primed surface by heat process, over laps of 100 mm shall be sealed / fused by flame torch application as per manufacturer instructions. (c) Applying two coat of bituminous bases aluminium paint @ 0.2 kgs/sqm over APP membrane.

M&L PCC 1:2:4, type B1 using 20 mm graded stone aggregate as in roof kerbs / benching / coving and roof padding over roof surfaces /sunken treatment etc rounded or chamfered on edges, complete all as specified and directed.

Demolition of brick work built in cement mortar including all quoins, arches, pillars etc but excluding ashlar facings and precast concrete articles complete all as specified and directed.

M&L for brick work with fly ash bricks, staright or curved on plan exc 6m mean radius and built in CM 1:6 complete all as specified and directed.

Demolition of cement concrete (unreinforced) as in ground floors & pavings not exceeding 15 cm thickness (below or above ground level) complete all as specified and directed.

Taking down cement plaster on brick walls / ceiling incl. raking out joints, hacking for key, scrubbing down with water etc. complete all as specified and directed.

Taking down 15mm dia GI tubing and connections incl. cleaning for refixing or removal to store complete all as specified and directed.

Taking down 20mm dia GI tubing and connections incl. cleaning for refixing or removal to store complete all as specified and directed.

Taking down 25mm dia GI tubing and connections incl. cleaning for refixing or removal to store complete all as specified and directed.

Cutting chases, pining in, making good to facing where required and pointing in CM 1:3 for concealed water tubing making good, cutting exc 10cm but n.exc 20cm girth in brick walls complete all as specified and directed.

S&F of 15 mm bore steel tubing medium grade, galvanised with all fittings and fixed complete to walls and ceiling or laid in floors etc all as specified and directed.

S&F of 20 mm bore steel tubing medium grade, galvanised with all fittings and fixed complete to walls and ceiling or laid in floors etc all as specified and directed.

S&F of 25 mm bore steel tubing medium grade, galvanised with all fittings and fixed complete to walls and ceiling or laid in floors etc all as specified and directed.

Dismantling of water storage tanks exc 500 ltr but n.exc. 1000 ltr capacity and removing from site as directed.

S&F 1000 Litre capacity Rotational moulded polyethylene water storage tanks triple layered (cylindrical, vertical with closed top) ISI marked, hoisted & fixed in position & making necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe etc. complete all as specified and directed.

Dismantling PVC water tanks and removing from site capacity exceeding 250 litres & not exceeding 500 litres all as directed.

S&F 500 Litre capacity Rotational moulded polyethylene water storage tanks triple layered (cylindrical, vertical with closed top) ISI marked, hoisted & fixed in position & making necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe etc. complete all as specified and directed.

S&F 20 mm dia gun metal globe or gate valves with iron wheel head, screwed both ends for iron pipe complete all as specified and directed.

S&F 15 mm dia gun metal globe or gate valves with iron wheel head, screwed both ends for iron pipe complete all as specified and directed.

S&F 20 mm dia ball valve high pressure of PTMT with epoxi coated aluminium rod and high density plastic ball screwed for iron pipe and fixed (Min wt 210gms) complete all as specified and directed.

Disconnecting existing tanks, exc 500 Ltr & n.exc 1000 Ltr setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position complete all as specified and directed.

M&L for 15 mm thick rendering in cement mortar (1:4) mixed with water proofing compound on brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed. NOTE : Water proofing liquid shall be measured and paid separately.

M&L for 10 mm thick rendering in CM 1:6 on brick or concrete surfaces on wall and finished surface even and smooth witout using extra cement complete all as specified and directed.

M&L for 5 mm thick rendering on fair faces of brick work or concrete surfaces on ceiling with CM 1:3 etc complete all as specified and directed.

M&L for preparation of new plastered surfaces of walls and applying two coats of oil emulsion distemper (OBD) of approved shade over a coat of primer complete all as specified and directed.

M&L for preparation and complete removal of existing treatment from old plastered surfaces of walls and applying two coats of oil emulsion distemper (OBD) of approved shade/tint over a coat of 1-2 mm thick wall care putty (Make-Birla/JK/Asian), complete all as specified & directed.

M&L for preparation of newly plastered surfaces of wall & applying two coats of cement base paint over a coat of alkali resistant primer of approved shade/tint complete all as specified and directed.

M&L for preparation & complete removal of existing teatment from old plastered surfaces of wall & applying two coats of cement base paint over a coat of alkali primer of approved shade complete all as specified and directed.

M&L for preparation of newly plastered surfaces of ceiling and applying two coats of white wash complete all as specified and directed.

M&L for preparation of newly plastered surfaces of wall and applying two coats of white wash complete all as specified and directed.

M&L for preparation and complete removal of old decorated plastered surfaces of ceilling and applying two coat of white washing on ceilling complete all as specified and directed.

M&L for 1-2 mm thick wall care putty over wall/ceiling surfaces etc complete all as specified and directed.

M&L for preparation on newly plastered surface of walls and applying two coat of plastic emulison paint of approved shade over a coat of primer complete all as specified and directed.

M&L for preparation on newly plastered surface of ceiling and applying two coat of plastic emulison paint of approved shade over a coat of primer complete all as specified and directed.

M&L complete removal of existing treatment including cleaning of mortar drops, smoke soot, moulds, moss, efflorescent salts, trading oil, greasy spots etc and applying two coats of plastic emulsion paint of approved shade/tint over a coat of 1-2 mm thick wall care putty with primer on walls etc complete all as specified and directed.

M&L complete removal of existing treatment including cleaning of mortar drops, smoke soot, moulds, moss, efflorescent salts, trading oil, greasy spots etc and applying two coats of plastic emulsion paint of approved shade/tint over a coat of 1-2 mm thick wall care putty with primer on ceiling etc complete all as specified and directed.

M&L complete removal of existing treatment including cleaning of mortar drops, smoke soot, moulds, moss, efflorescent salts, trading oil, greasy spots etc and with two or more coats of 100% premium acrylicemulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @1.43 litre/10sqm over and includig priming coat of exterior primer applied @0.90 litre/10sqm over a coat of 1mm thick Birla putty etc all as specified and directed.

M&L for preparation on newly plastered surface of walls and applying two coat of acrylic emulsion paint (exterior grade) of approved shade over a coat of primer etc all as specified and directed.

M&L for preparation of old surfaces of wood or wood based materials of any description over 10 cm width or girth and applying one coat of synthetic enamel paint of approved colour complete all as specified and directed.

M&L for preparation of old surfaces of steel of any description over 10 cm width or girth and applying one coat of synthetic enamel paint of approved tint /shed etc complete all as specified and directed.

Taking down rain water pipes (any size or pattern) incl all fittings, shoes, bends, swan neck etc. and removal to store complete all as specified and directed.

S&F 100 mm bore UPVC (SWR),SCH-40 pipes single socketed in any length with rubber ring joints laid in trenches or floors complete all as specified and directed.

S&F 100 mm UPVC (SWR) bends of any radius complete all as specified and directed.

S&F 75 mm stack clamps out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stay to wall or roof etc complete all as specified and directed.

M&L for 50 mm thick PCC (1:3:6) type C-2 using 40mm graded stone aggregate as in plinth protection laid in alternate panels, finished even and smooth without using extra cement complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed.

Roughening surfaces of old concrete floor by picking sweeping clean and washing with water to remove dust etc and brushing with neat cement slurry @ 3.0 Kg of cement per sqm complete all as specified and directed.

M&L for joint free non skid ceramic tiles (coloured) 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm as in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 15 mm thick screed bed in cement & sand mortar 1:6, complete all as specified and directed.

Same as item No-53 above but on vertical surfaces and 10 mm thick screed plaster in CM 1:4 complete all as specified and directed.

M&L for non skid ceramic tiles (coloured) 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm as in floors joints free, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 15mm thick screed bed in cement & sand mortar 1:6, complete all as specified and directed.

M&L for glazed ceramic tiles (coloured) 450x300 x 7mm thick on vertical surfaces such as dado, skirting etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 10 mm thick rendering in cement & sand mortar 1:4, complete all as specified and directed.

M&L for glazed ceramic tiles (coloured) 300x600 x 7mm thick on vertical surfaces such as dado, skirting etc,set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 10 mm thick rendering in cement & sand mortar 1:4, complete all as specified and directed.

M& L for Vitrified Ceramic tiles double charged/digital 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 15 mm thick screed bed in cement & sand mortar 1:6, complete all as specified and directed.

All as item No. 58 above but on vertical surfaces including 10 mm thick screed plaser in CM 1:4, complete all as specified and directed.

M & L 300X600X7mm thick stone finish glazed ceramic tiles as in wall cladding on vertical surface, set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick rendering in CM 1:4 as in vertical surfaces complete all as specified and directed.

Taking down shutters of any description exceeding 1 sqm and n.exceeding 2 sqm each complete all as specified and directed.

Taking down shutters of any description not exceeding 1 sqm each complete all as specified and directed.

Taking down chowkat or frame with shutters area not exc 1.5 Sqm each (without taking off the shutters from the frame) including irom mongry and cutting holes for hold fasts & making good complete all as specified & directed.

Taking down chowkat or frame with shutters area exc 1.5 Sqm but not exc 4 Sqm each (without taking off the shutters from the frame) including iron mongry and cutting holes for hold fasts & making good complete all as specified & directed.

Taking down shutters exc 1.0 sqm but not exc 2.0 sqm each and refixing in same opening etc all as specified and directed.

M & L Second class hard wood plain, solid, straight chowkats and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue pinned at joints including creosite painting to back side etc all as specified and directed.

M & L 30 mm thick factory made flush shutter, solid core construction, with block board core and plywood face panels, commercial type on both sides including 1.5 mm thick decorative laminate type-1 both sides of surface glossy finish,colour and pattern as approved,fixed with approved adhesive incl brass mortice lock, all as specified and directed.

M & L 30 mm thick factory made flush shutter, solid core construction, with block board core and plywood face panels, commercial type on both sides all as specified and directed.

M & L 35 mm thick, second class hard wood, factory made, glazed and skeleton door shutters, open rebated and prepared to receive glass, gauze etc divided into squares with rails and styles including cut and mitered beards for securing wire cloth etc. the size of members as specified in SSR-2009, Part I clause No 8.20 (a) and as directed.

M & L, 30 mm thick, second class hard wood, factory made, glazed and skeleton windows, ventilators etc are provided with stiles and rails shutters, open rebated and prepared to receive glass, gauze etc divided into squares with rails and styles including cut and mitered beards for securing wire cloth etc. the size of members as specified in SSR-2009, Part I clause No 8.20 (b) and as directed.

Supply and Fixing Factory made steel windows double shutter with tubular frame of size 40x79 mm with 'Z' section side hung glazed shutter fixed (with sash bar) on external side and with wire guage shutter (without sash bar) on internal side and including steel handle 100mm long of MS flat 20x5mm made to shape 02 Nos of MS tower bolts 100 mm on each shutter and fixing hooks & eye of standerd quality as approved complete all as specified and directed.

S&F powder coated (minimum thickness of powder coating 50 micron) alumium window shutter three track section having frame size bottom with outer 92x45.50x1.50 mm (section code 20617), top & bottom size 40x18x1.55 mm (section code 20736), interlock size 40x18x1.45 mm (section code 20737), side/middle size 40x18x1.55 mm (section code 20738) including necessary jointing cleats, glazing clips, rubber backing, anodized aluminium snap beading screw anodised aluminium fitting complete and including glazing by using 5 mm thick plain sheet glass and stainless steel wire mesh of dia 0.36 mm and aperture 1.4 mm complete all as specified and directed. (Refer Drg No LZ/C-TD/151 Sheet No 1/2 and 2/2. Note- Rates for glazed shutters with glass thickness not less than 5.00 mm and SS wiremesh shutter with SS wiremesh as approved by GE is deemed to be included in this item.

S&F powder coated aluminium glazed window with 4mm thick plain/tinted glass consisting of frame of size 63.5 mm x 44 x 1.8 mm thick and shutters section weight not less than 0.55 kg/m with locking arrangement as approved fixed including necessary jointing cleats, glazing clips, rubber packing, aluminium snap beading, screws, aluminium fitting as per site requitment incl powder coated grill of aperture 75 mm and fixed in frame of windows with stainless steel wiremesh incl necessary fixing arrangement complete all as specified and directed.

S&F powder coated aluminium ventilotar with 4 mm thick figured flass and with frame size 63 mm x 38 mm x 1.8 mm thick including necessary jointing cleats, glazing clips, rubber packing, aluminium snap beading, screws, aluminium fitting as per site requitment etc all as specified and directed.

S&F powder coated aluminium grill (opening of grill not more than 75mm x 75mm) fixed to windows or ventilators with anodised aluminium U channel 25x12mm size complete all as specified and ditected.

S&F PVC cabinet of kitchen in required sizes at site made out of 18 mm thick one side decorative lamination & other side balancing lamination sheet consisting of carcass 18 mm thick PVC sheet & provision of shutters made out of 18 mm thick one side decorative laminated PVC sheet all required brackets, SS screws etc. The panels shall be fabricated using adhesive and screws where ever required. All the edges shall be covered with 2mm thick edge bonding tape or 90 degree edge bent finish including all necessary fittings as per site requirementand including taking down of old shutters and removing from site complete all as specified and ditected.

S&F solid PVC door frame of size 50mmx47mm thick made out of 5mm thick plain colour PVC sheet reinforced with M.S Square tube, single side prelam PVC sheet used instead of plain colour PVC sheet edges will be painted to match with prelam sheet complete all as specified and ditected.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S tubes for top and bottom rails. M.S frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail, and bottom rail, panelling of plain colour PVC sheet to be fitted in the M.S frame welded/sealed to the stiles beading, and joined to gether with solvent cement, suppling and fixing in the frame at site complete all as specified and ditected.

S & F 100 x 63 mm single rebated factory made, 100% solid WPC (Wood Polymer Composite) paintable door frame made from 100% lead free (Single Extruded Process) material with density not less than 780 kg/Cum all as specified and directed. Note : (a) Door frame shall be water proof, termite proof, fire retardant and having excellant screw holding capacity. (b) Rate for this item also includes Material and labour for fixing of frame with minimum 06 Nos of hold fasts/Dash through bolts of suitable size as directed by Engineer-in-Charge.

S & F Factory made 28 mm thick 100% solid WPC (Wood polymer composite) laminated flush door shutter decorative type of required size comprising of virgin PVC resin of K value 57-60 (suspension grade),calcium carbonate and natural fibre (wood powder/rice husk/wheat husk) and non toxic additives,made from extrusion process WPC foam sheet single extruded (inner) with having minimum density not less than 650 kg/cum manufactured by Rajshree an ISO 9001-2015 certified company,having good screws holding capacxity (screw withdrawal strength of 2000 N (face) & 1100 N (edge) minimum compressive of 50 N/sqmm,and all as per manufacturer instruction ,complete all as specified and directed Note : (a) Door frame shall be water proof, termite proof, fire retardant and having excellant screw holding capacity. (b) Rate for this item also includes Material and labour for fixing of frame with minimum 06 Nos of hold fasts/Dash through bolts of suitable size as directed by Engineer-in-Charge.

S&F butt hinges of size 100mm medium weight, stainless steel ISI marked complete all as specified and ditected.

S&F 125 mm size aluminium alloy handles, fabricated type, extruded section complete all as specified and ditected.

S&F 150mm long aluminium anodised barrel tower bolts of extruded section complete all as specified and ditected.

S&F butt hinges of size 75 mm medium weight, stainless steel ISI marked complete all as specified and ditected.

S&F 100 mm size aluminium alloy handles, fabricated type, extruded section complete all as specified and ditected.

S&F 100 mm long aluminium anodised barrel tower bolts of extruded section complete all as specified and ditected.

S&F150 mm length door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor etc complete all as specified and ditected.

S&F mild steel work for hold fasts and similar small articles conforming to Fe410-0 or Fe 310-0 complete all as specified and directed.

M&L PCC(1:3:6), type C-1 as in cills, steps, seismic band and other similar band, copings, bed block, kerbs, water troughing and incl weathering slightly rounded or chamfered angles and throating complete all as specified and ditected.

Hacking out old broken glass (any thickness, size, quality or description) from wooden/steel frame etc complete all as specified and ditected.

S&F for 3mm thick sheet glass,ordinary quality and glazing with oil putty or wooden beads square area n exc 0.5 sqm in each pane complete all as specified and ditected.

S&F for 3mm thick figured glass pin headed type and glazing with oil putty or wooden beads square area n exc 0.5 sqm in each pane complete all as specified and ditected.

S&F stainless steel wire cloth 0.63 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and ditected.

M&L for preparation of new surfaces of wood or wood based materials of any description over 10 cm width or girth and applying two coats of synthetic enamel paint of approved tint over a coat of pink primer complete all as specified and ditected.

M&L for preparation of new surfaces of steel of any description over 10 cm width or girth and applying two coats of synthetic enamel paint of approved tint over a coat of red oxide primer complete all as specified and ditected.

M&L in repair CI floor trap 75 mm with grating incl jointing to waste pipe fixed in plain cement concrete 1:2:4 type B1 type B1 complete all as specified and ditected.

M&L in repair CI floor trap 100 mm with grating incl jointing to waste pipe fixed in plain cement concrete 1:2:4 type B1 complete all as specified and ditected.

S&F in repairs cast iron soil waste and vent pipes in any length with or without ears with lead joints in trenches or in floors or wall using sand cast CI pipes 100 mm bore pipes etc including dismantling of old pipe complete all as specified and directed.

S&F in repairs cast iron soil waste and vent pipes in any length with or without ears with lead joints in trenches or in floors/walls using sand cast CI pipes 75mm bore pipes etc including dismantling of old pipe complete all as specified and directed.

S&F in repair vitreous china floor hung WC with flushing cistern, UF seat cover, hinges, accessories set of size 375 x 650 x 800/370 x 645 x 810 mm fixed to wall/floor with P/S trap complete as per manufacture's instructions complete all as specified and ditected.

S&F in repair vitreous china wall hung WC, UF seat cover, hinges, accessories set of size 360 x 570 x 360 mm fixed to wall/floor with P/S trap complete all as specified and ditected.

S&F single piece slim concealed cistern body with installation kit & s type, drain pipe, connection set for wall hung WC complete including connection with GI pipes or connection pipe complete all as specified and ditected.

S&F in repair vitreous china table top Wash Hand Basin of size 635 x 430 x 190 mm with bottle trap complete all as per manufacturer's instruction complete all as specified and ditected.

S&F single lever Basin mixer tall boy with 1.25 mm extension body fixed and spout without popup waste system with 600 mm long braided holes etc all as specified and directed.

S&F in repair chromoium plated box type toilet paper holder fancy complete all as specified and ditected.

S&F in repair CP soap dish fancy type etc fixed on wall surfaces etc complete all as specified and ditected.

S&F in repair glass corner self assembly, fancy type, made of 6 to 7mm thick sheet toughened glass of size 250x250mm, fixed with CP brackets, complete, all as specified and directed.

Supply & fix in repair sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and ditected.

S&F, in repair 15mm dia long body bib taps, cast copper alloy chromium plated fancy type with crutch or butterfly handle screwed down, screwed for iron pipe or for brass ferrule complete all as specified and ditected.

S&F in repair brass CP tubular towel rail of superior quality 20 mm dia 60cm long between flanges fancy type complete all as specified and ditected.

S&F in repair Towel ring 200mm dia superior quality complete all as specified and ditected.

S&F in repair pillar tap 15mm dia long body,chromium plated, fancy type complete all as specified and ditected.

S&F PVC connection of 15mm bore,600mm long with brass coupling on both ends of superior quality complete all as specified and ditected.

S&F in repair CP angle valve for 15 mm bore pipe with capstan head long screwed shank including CP cover plate fancy type complete all as specified and ditected.

S&F in repair health faucet (ABS Body) with 1.00 Mtr long flexible tube incl wall hook complete all as specified and directed.

S&F in repair 15 mm bore 2-way bib cock with flange etc all as specified and directed.

S&F in repair 15 mm bore CP wall mixer 3-in-1 system with provison for bath hand shower & overhead shower complete with 115 mm long bend pipe, connecting legs, wall flange and hand shower (without overhead shower) fixed in iron pipes etc all as specified and directed.

S&F in repair CP over head shower (150x150) mm square shape single flow (ABS body chrome plated with grey face plate) with rubit cleaning system etc all as specified and directed.

S&F in repair 15mm bore brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed long body for kitchen sink complete all as specified and directed.Make-Jaquar Alive/Aria/Plumber/Marc

M&L for 20 mm thick Granite (of any type) work (table rubbed and polished) in steps jambs, pillars, window-cills cooking platforms and like fixed in 15 mm thick cement mortar 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed. Make-Jaquar/Plumber/Marc

Rounding to edges of stone slabs one edge, such as in steps, cooking platform and other similar situation complete all as specified and directed.

S&F in repair curtain rods, coloured, standrad quality, PVC coated not less than 25mm dia with heads at both ends and middle support, rings etc. complete all as specified and directed.

M&L for RCC 1:2:4 type B-1 using 20mm graded stone aggregate as in Slabs supported on walls,beams and columns in floors,roofs, landings, balconies,canopies, deck slabs and in shelves and the like incl weathering, slightly rounded or chamfered angles, throating and dirceted and other similar works including necessary form work complete all as specified and directed.

M&L for mild steel TMT bars 10mm dia and over cut to length bent to shape required including hooking ends and binding with mild steel (annealed) wire not less than 0.9 mm dia or securing with clips quality conforming etc complete all as specified and directed.

Repairing of RCC projections chajjas, roofs, facia etc by necessary preparation, scrapping, cutting, chiseling, derusting and cleaning exposed reinforcement, surfaces of damaged, loose RCC and providing cement concrete (1:1.5:3) using 12.5 mm graded crushed stone aggregate including necessary form work and reinforced with chicken wire mesh and rendering in cement mortar 1:3 using coarse sand in patches area not exceeding 5 sqm each and thickness of RCC member not exceeding 70mm including applying two coats of finishes as provided to the existing surfaces to match with the existing surfaces in at any height complete all as specified and directed.

S&F in repair sink made of stainless steel 1mm thick for kitchen with plugs, washers and wastes, including fixing with cast iron cantilever brackets, bedding in cement mortar on to dwarf wall, connecting union to pipe, overall minimum size 495mm x 420mm bowl size 410mm x 330mm x 160mm including 32mm dia waste pipe of polythelene of low or high density, 32mm bore chromium plated brass waste fitting with long screwed shanks and fly nuts, flange end bedded in red lead cement & other end fixed, making holes in walls for brackets and fixed in CM 1:3 or PCC 1:2:4 type B0, complete, including taking down old unserviceable sink complete all as specified and directed.

S&F in repair vitreous china wash down water closet pan pedestal pattern white (excluding fixing bolts, flushing cistern) including flush pipe of polyethylene of low or high density or PVC, 32 mm dia, for low level cistern etc all as specified and directed.(Make:- Jaquar, Plumber,Marc)

S&F in repairs vitreous china squatting pan (Orissa pattern) water closet (white) of size 580x440mm with integral foot rests, 'P' or 'S' trap, including connection to trap and flushing pipe, antisyphonage pipe incl PCC 1:5:10 type E2 in filling making good to floor etc complete all as specified and directed.

S&F PVC valveless symphonic action type low level flushing cistern (ISI marked) of 10 litre capacity including 32 mm dia PVC flush pipe connected to water closet with inlet, ball valve, float and handle complete all as specified and directed.

S&F in repair plastic water closet seat cover black/white, closed pattern with flat bottom & cover and aluminum anodised hinging device complete all as specified and directed.

S&F in repairs vitreous china wash hand basin, white, flat back of size 550 x 400 mm excluding taps, waste, chain and plug porcelain stopper but including brackets incl cutting for and pinning in ends of brackets or erecting stand incl 32 mm dia pvc waste pipe and 32 mm dia waste cupling etc complete all as specified and directed.

Excavation in trenches in soft/loose soil not exc 1.5 mtrs depth and not exc 1.5 mtrs wide for foundation, etc or shafts, well, cesspits,manhole, pier holes etc etc, not exc 10 sqm on plan etc complete all as specified and directed.

S&F UPVC underground drainage pipe (UDS) type 'B' 160 mm dia with wall thickness 4mm (min) and pressure 4 KN/m2 jointed in cement solvent complete including testing and concrete bed to drain pipe incl packing under haunching against the sides of pieps after they are laid and tested in PCC 1:3:6 type C-2 using 40 mm graded stone aggregate complete all as specified and directed.

Returning, filling in, including spreading, leveling watering and well ramming in layers n.exc 25cm in soft/loose soil complete all as specified and directed.

M&L for removing excavated material to a distance exc. 250 m but n.exc. 500m and depositing where directed at a level n.exc. 1.5m above the starting point complete all as specified and directed.

Material and Labour for Soakage wells excavation, in any type of soil, foundation in PCC 1:3:6, walls of honey combed masonry with top ring of M25 concrete including intercepting chamber and screen chamber made of Brick masonary in CM 1:4, RCC cover slab in M25/ SFRC cover, interconnecting pipes of RCC/DWC complete filled with brick bats of size 3.6 m dia and 4.5m effective depth complete all as specified and directed.

Dismantling boarding any description, fixed in any position with nails etc all as specified and directed.

M&L for antitermite treatment at contact of wood work along internal by chemical emulsion @ 2.25 litre/Sqm including drilling & plugging hole etc complete all as specified and directed.

M&L 2nd class HW plain fillets square, rectangular or triangular in section, clean sawn, secured with nails or brads exc 13 & n exc 25 sqcm etc complete all as specified and directed.

M&L 12 mm thick plywood grade BWR type BB, fixed with screw to timber frame work block board interior grade having both sides commercial faces fixed with screws to timber frame work complete all as specified and directed.

M&L for 6 mm thick veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on one faces, fixed with screwds to timber frame work complete all as specified and directed.

M&L PU polish on wooden wall surface/wood based material of any description width of girth including removing/cleaning and prepration of the surface including a coat of wood filler with two or more coats as approved complete all as specified and directed.

M&L 1st class HW Beading sectional area not exceeding 6 sqcm fixing with nails etc complete all as specified and directed.

M&L 1st class HW moulding as in cornices, sectional area exceeding 6 sqcm but not exceeding 13 sqcm, fixing with nails complete all as specified and directed.

Demolition of stone slabs and any pettern of tiles of any description or thickness in floors, aprons laid , bedded and pointed in type of motar etc complete all as specified and directed.

Dismantling of old wooden battens for tiles, shingles etc of any size including tilting fillets etc all as specified and directed.

M&L for 25mm thick PCC 1:2:4 type B0 using 12.5mm graded crushed stone aggregate as in flooring etc complete all as specified & directed.

M&L for 75 mm thick PCC (1:4:8) type D2 using 40 mm graded crushed stone aggregate as in sub base, surface finished fair and even complete all as specified & directed.

M&L machine pressed precast concrete rubber moulded interlocking coloured paver block of any shape and size confirming to IS 15658- 2006 of 60 mm thickness, M-35 grade with grey cement and no pigment etc complete all as specified and directed.

S&F sand filling under floors or in foundation including watering and consolidation etc complete all as specified and directed.

S&F in repairs stainless steel wire cloth 0.63 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed.

Excavation in post holes (or similar holes) each n exc 0.50 cum, getting out, returning, filling, in and ramming earth or broken rubble mixed with earth around in layers n.exc. 25cm, watering and removing surplus soil to distance n exc 50 m and making good surface in soft/loose soil complete all as specified and directed.

M&L for PCC, 1:3:6 type C-2 (using 40mm graded stone aggregate) in any thickness, size or shape incl pilaster, buttresses columns, pillars, boundary pillars and posts (incl caps and bases) etc complete all as specified and directed.

S&F mild steel section such as tubular trusses including special shaped washer etc. compete using ERW or induction butt welded tubes conforming to I.S.1161-1979 grade ST-240 etc complete all as specified and directed.

S&F plates (plains or chequred channels, square cut to notched ordinary and counter sunk) forming holes, without any attachment Fe 410-w (Gde-E-250) quality - A etc complete all as specified and directed.

S&F in repairs vitreous china coloured half stall type urinal with sensor assembly including CP brass urinal spreader, CP brass waste coupling, CP brass bottle trap, 40 mm dia waste pipe, grating & brackets, complete all as specified and directed.

S&F coloured pre-painted GALVALUME aluminium zinc coating GI based corrugated steel sheet 0.50mm thick having tensile strngth of 550 Mpa as in roof covering /cladding to wall fixed with self tapping screws including necessary washers etc all as per manufactures instruction complete all as specified and directed.

Demolition of sunken slab floor or WC and Bath including WC trap etc incl taking down loose filling of aggregate in any type and removing where direted and providing water proofing treatment of sunken slab in following order . (a) 15mm thick rendering on vertical sides of RCC slab in CM 1:3 mixed with WP chemical PIDIPROFF LW of Dr Pidilite as per manufacturer instructions. (b) Cleaning the concrete surface by brushing and watering and remove all surface inperfections. (c) Fixing 40mm dia Pipe 450mm long bottom of the sunken and wraping of bath seal tape on the pipes inserted through walls to floor are and seal it (Bath seal tape product of Dr fixit and grouting around the inserted pipes by Dr fixit bath seal grout as directed. (d) Make angle fillets by mixing sand cement and Dr fixit pidicrete URP on all corners. (e) Brushing neat cement slurry two coats with high performance cementitious polymer water proofing coating of Dr fixit bath seal WPC of thickness 1mm in combination of WPC and cement (1:1.5) by vol and giving upto height 15cm from bottom slab and allow it dry completely. (f) Providing PCC 1:4:8 type D-2 using 40mm graded stone aggregate mixed with WPC of Dr fixit as per mnufacturer instructions in sunken slab over brick bat (g) Fill the sanitary gaps with Dr. Fixit sealing compounds complete.

M&L exterior designer tiles 10 mm thick (square/rectangular) area of each tiles exc. 0.06 sqm but not exc. 0.11 sqm, in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles including screed bed or bedding layers of mortar 15 mm thick for laying floor finishes with CM (1:6) etc complete all as specified and directed.

S&F 10.5mm thick Engineer wood flooring American exotic bruce 7 layer construction, top layer of wood veener 2mm, plank size width 120mm, length 400-1200mm, lock and fold locking, premium finish , micro bevel edges/ends with an underlayment made of natural colour foam with accessories like end profile, transition profile, reducer etc. complete all as specified and directed. Make: Armstrong/Pergo

Refixing of retrieved usable wooden tiles/batten including necessary fittings/fixtures/adhesive to make uniform with existing one including polishing work complete all as specified and directed.

Taking down carefully copper/aluminium point wiring (light, fan, socket, bell or power) complete including all electrical fittings & fixtures(DBs, submain,cables etc) and making good disturbed surfaces of wall , floor etc and matching wth original colour of wall, complete, all as specified & directed.

Taking down & re-fixing the same after completion of wiring including connecting of electric connection of ceiling fan/exhaust fan with three core copper flexible wire 23/0.0076 complete all as directed .

M&L for one light/fan/exhaust fan point wiring controlled by one switch with PVC insulated unsheathed multi stranded copper conductor (FRLS) of size 1.5 Sqmm (for Phase colour code Red and for Neutral colour code Black) and one run of size 1.5 Sqmm PVC insulated unsheathed multi stranded copper conductor (FRLS) (as earth wire, colour code green) and connected to common earth dolly all as specified, drawn through in and including concealed PVC Conduit medium grade, ISI marked not less than 19.5 mm / 20 mm dia along with conduit fixing accessories and with pressed steel terminal box for mounting of modular inner plates of thickness 1.6 mm with outer modular plates upto 12 modules (Make: Crabtree) for provision of modular switches/regulators complete, all as specified & directed. NOTE:- After rewiring cutting chasing portion should be matched with existing finishes of walls.

Same as item No 164 above but 5 Amp socket outlet on independent board.

Same as item No 164 above but on the same board.

Same as item No 164 above but for one light point controlled by two, 2- way switch.

Same as item No 164 above but 2.5 sqmm wire for one 15 Amps socket outlet independent with continuous PVC insulated single core green colour copper earth wire of size 1.5 sq mm connected to common earth dolly.

Supply and fixing for socket outlet multipurpose 2-in-1, 5 pin 6 Amps, 230 Volts modular type complete all as specified and directed.

Supply and fixing for socket outlet multipurpose 2-in-1, 6 pin 6 /16 Amps, 230 Volts modular type complete all as specified and directed.

Supply and fixing for modular switch 1 way 6 amps 230 volts single pole one way complete all as specified and directed.

Supply and fixing for modular switch 1 way 16 amps 230 volts single pole one way complete all as specified and directed.

Supply and fixing for modular switch 2 way 6 amps 230 volts single pole one way complete all as specified and directed.

Supply and fixing in repairs inner plate & white cover plate with frame, 2 modules complete all as specified and directed.

Supply and fixing in repairs inner plate & white cover plate with frame, 3 modules complete all as specified and directed.

Supply and fixing in repairs inner plate & white cover plate with frame, 4 modules complete all as specified and directed.

Supply and fixing in repairs inner plate & white cover plate with frame, 6 modules complete all as specified and directed.

Supply and fixing in repairs inner plate & white cover plate with frame, 8 modules complete all as specified and directed.

S&Fixing in Replacement ceiling rose two or three terminals surfaces bakelite 65 x 50mm size complete all as specified and directed.

M&L for one light/fan/exhaust fan/holder point wiring controlled by one switch with PVC insulated unsheathed multi stranded copper conductor (FRLS) of size 1.5 Sqmm (for Phase colour code Red and for Neutral colour code Black) and one run of size 1.5 Sqmm PVC insulated unsheathed multi stranded copper conductor (FRLS) (as earth wire, colour code green) and connected to common earth dolly all as specified. , drawn through in and including concealed PVC Conduit medium grade, ISI marked not less than 19.5 mm / 20 mm dia along with conduit fixing accessories and with pressed steel terminal box thickness 1.6 mm painted with one coat of black bituminous paint as a primary and two coats of enamel paint with 3 mm thick laminated sheet (Make: Hylam) for provision of switches/regulators as per specified SSR and as directed by Engineer- in- Charge. . NOTE:-After rewiring cutting chasing portion should be matched with existing finishes of walls.

Same as item No 180 above but 5 Amp socket outlet, independent board.

Same as item No 180 above but on the same board.

Same as item No 180 above but 2.5 sq mm wire for one 15 Amps socket outlet independent with continuous PVC insulated single core green colour copper earth wire of size 1.5 sq mm connected to common earth dolly.

S&F switch piano flush type 5 Amp one way single pole, 240 volts complete all as specified and directed.

S&F socket outlet 5 Amp 5 Pin 240 volt flush type complete all as specified and directed.

S&F switch socket outlet two in one 5 & 15 Amp 6 pin multipurpose combination complete all as specified and directed.

S&F ceiling fan regulator for 1200mm/1400mm sweep electronic rotary step type 120/280 volts complete all as specified and directed.

S&F lamp holder with back plate suitable for batten fittings (white colour) complete all as specified and directed.

Supply and fixing in repairs wall mounted fancy light fitting brass made (double light) bracket with 220mm x 86mm decorative rectangular base, two 210mm lengthy 'U' shaped brass arms brass Dull black powder coated ; sutable for 4 to 9W LED Lamp complete all as specified and directed. Make:- Mepro Cat No- MBBD 901 or equivalent in Philips/Havells/Bajaj.

M&L for renewal of earthing complete with galvanised steel earth plate electrod 60cmx60cmx6mm thick burried directly in ground ( earth ) pit not less than 2.25mtr below normal ground ( level ) connected to and including using galvanised iron strip 25×4mm as earthing lead by means of bolts nuts check nuts and washers of galvanaised iron or steel including PCC pit in 1:2;4 type B-1 RCC cover with suitable handle and angle iron 40x40x5mm frame, excavation and earth work in any type of soil, medium grade GI watering pipe 20mm bore with funnel and wire mesh and light grade protetion pipe 15mm bore upto main board complete as shown on electrical plate No 3 of MES Sch 2009 ( part-I) and testing after completion.

M&L for wiring with two single core 10 sqmm multi-stranded copper conductor PVC FRLS insulated and unsheathed cable ISI marked drawn through in and including PVC conduit medium grade concealed in wall for sub main connection including 10.0 Sqmm PVC insulated unsheathed stranded copper conductor as earth wire complete all as specified and directed.

Supply and fixing in repairs LED Building security light 36W IP 65 including one number MS clamps made of 25x3 mm flat iron with bracket of GI pipe light grade 25 mm dia and length not less than 1.2 mtr end of GI pipe suitable for street light fitting, connecting with three core copper flexible wire 23/0.0076complete all as specified and directed.

Supply and fixing LED Mirror light fitting 10 watt(2') with extruded aluminium housing and robust construction complete with inbuilt driver complete all as specified and directed.

supply and fixing JETA PRO 70 LED security light 70 W IP 65 with required electrical connection with the MS clamps with Nut bolts as per the required complete all as specified and directed.

Supply & fixIing exhaust fans AC single phase 230/ 240 V of size 300 mm sweep PVC body with louver with complete making a hole including civil work neccassary connection with the required wire complete all as specified and directed.

Supply and fixing as in repair MCB DB TPN (double door) 4 Ways, 415 Volts including bus bar neutral link, earth bar and din rail, recessed with wall surfaces by chase cutting and making good surfaces of wall complete all as specified and directed.

Supply & Fixing in replacement isolator four pole 415 volts, 100 Amps, curve 'C' of breaking capacity 10KA complete all as specified and directed.

Supply and fixing in repairs LED tube light along with fixture including one number of 20 watt 4' LED tube complete all as specified and directed.

Supply and fixing in repair MCB DB SPN (double door) 8 Ways including bus bar neutral link, earth bar and din rail, recessed with wall surfaces by chase cutting and making good surfaces of wall complete all as specified and directed.

Supply and fix Single pole and neutral sheet metal enclosure with two pin and earth plug and socket complete with one single pole MCB 20 Amps complete all as specified and directed.

Supply and Fixing in replacement MCB, single pole, 240 Volts, curve 'C' of capacity (6-32 Amps) as ordered breaking capacity 10 KA complete all as specified and directed.

Supply and fixing in repair MCB SPN, 40 to 63 Amps, 240 Volts, curve 'C' of breaking capacity 10KA complete all as specified and directed.

M&L for wiring with two single core 6 sqmm multi-stranded copper conductor PVC FRLS insulated and unsheathed cable ISI marked drawn through in and including PVC conduit medium grade concealed in wall for sub main connection including 6.0 Sqmm PVC insulated unsheathed stranded copper conductor as earth wire all as specified.

Same as item No. 203 above but two single core 4 sqmm including 4.0 Sqmm PVC insulated unsheathed stranded copper conductor as earth wire complete all as specified and directed.

S&F of stationery storage type electric water heater storage,capacity 25 ltrs, BEE 5 star rated operated on 230 volts AC Vertical type working pressure 0.8 Mpa with multi function safety valve and PUF installation including 4 Nos full threaded fastener of size 100x10 mm with two washer water connection with two No flexible steel hose pipe of size 15 mm 450 mm length and suitable plug top of 16 Amp capacity complete all as specified and directed.

Supply, installation & testing Solar water heating system consisting of flat plate collector box fabricated from aluminium extruded sections by means of gas welding or brazing leak proof fully insulated with glass wool (48Kg/M3) with supporting structure duly painted with synthetic enamel black paint over a coat of zinc chromate red oxide primer provided with absorber made from copper sheet & copper tubes with protective coating complete with header gromet, storage tank made from stainless steel sheet of minimum 20 SWG thickness with brass socket & nipple fully insulated with glass wool with cold & hot water pipings, gun metal valves, coil type stainless steel heat exchanger complete conforming to IS-12933 & 12976 with necessary wiring fixed on PCC platform, cold water tank & make up water tank Sintex or equivalent capacity 100 Ltrs per day capable to supply hot water at 600C . (Make-SINTEX,BHEL,TATA BP SOLAR INDIA LIMITED/SUN-WIZE/ (SUN TECHNICLES) and any other reputed ISO/ISI MARK as approved by Accepting officer. (a) . The thickness of stainless steel sheet for storage tank will be 20 gauge. (b). The system will be provided with electric back up of 3 KW for 200 Ltrs capacity. (c) The hot water pipe shall be of 20 mm KITEC (PE-AL-PE) and its cost upto 5 RM shall be deemed to be included in lumpsum rate quoted against this item.

Supply, fixing, testing of hot water pipe medium grade duly insulated with glass wool & aluminium cladding 15 mm bore.

Suppy and fixing Gun-metal, globe or gate valves, with iron wheen head, screwed both ends of iron pipe and fixed of size 20 mm diacomplete all as specified and directed.

Supply and fixing bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed of size 20 mm dia complete all as specified and directed.

Supply, hoisting and fixing in proper position 500 ltr capacity ISI marked multi-layer rotational moulded polyethylene water storage tank (cylindrical vertical with closed top), with connecting to solar water heating system complete all as specified and directed.

M&L for Frame work such as grills, gratings, etc, with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, famed balusters, walk ways, railings, framework or water tank and similar work conforming to Fe 290 Gde E-165 structure work for Solar water heater complete all as specified and directed.

M&L sheet metal enclosures for DB's 2 way single door complete all as specified and directed.

M & L for MCB single pole & neutral 240 V 63 Amps complete all as specified and directed.

Supply and fixing ceiling fan complete with electronic type regulator and accessories 230 V,1200 mm sweep BEE 5 star rated including all electrical connection with required wire complete all as specified and directed

jayanti associates

GIAN ENGINEERS

LUMOS INFRA PVT LTD

MD BUILDER

M/s Naresh Chand

Yadav Builders

M/s Ram Singh Agarwal

Bidder Name

M/s Reliable Electromech Systems