Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹1.8 L
EMD Value
₹2,188
Closing Date
21 Jun 2025, 11:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Directorate of Municipal Administration
Vinayaka KP
Installation of mini high mast light at Mahatma Gandhi Park of TMC Tarikere
DMA/2025-26/OW/WORK_INDENT38813/CALL-3
DMA/2025-26/OW/WORK_INDENT38813/CALL-3
Open
Other Works
Two Tender Document System(Two Cover)
DMA Town Municipal Council Tarikere
6 documents required · 6 mandatory
List of works for which tenders already submitted
should have in the last five years (i.e. 2020-2021 to 2024-2025) achieved in at least one financial year a minimum financial turnover (in all classes civil engineering works only) of Rs 1.75 Lakhs. Approved by CA with balance sheet & UDIN No.
List of existing commitments and ongoing works signed by the officer not below the rank of Executive Engineer
Satisfactorily completed as prime contractor at-least one such similar work of value not less than Rs.0.44 LAKHS
PWD class- 4 and above Registration Certificate (Valid License copy issued by competent authority.)
Reservation of scheduled caste certificate upload compulsory
Liquid assets and /or availability of credit facilities of no less than Rs.0.53 Lakhs (Credit lines/ letter of credit/ certificates from banks for meeting the fund requirement etc. in the suggested format attached in bid document
₹500
₹2,188
13 Jun 2025
13 Jun 2025
23 Jun 2025
19 Jun 2025
Installation of mini high mast light at Mahatma Gandhi Park of TMC Tarikere
Earth work excavation by manual means for drains, canals, waste weir, draft, approach channels, key trenches, foundation of Buildings & bridges and such simillar works in all kinds of soils, as per dr...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...
Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...
Steel Fabrication Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/we...
Fabricating, supplying and erection of . ms long hot dip Galvanized Conical hot dip Pole with BSEN 10025 grade S355JO steel plate for shaft, IS 2062 for base plate with door opening arrangements, incl...
Supply of LED floodlight luminaire with pressure die cast aluminum housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polycar...
Fixing halogen/metal halide /SVL/IL/LED floodlight fitting over existing pole / wall ceiling including clamps, bolts, nuts and wiring using suitable capacity wires.
Supplying, and fixing of Hot dip Galvanized M.S.Bracket suitable for out door luminaries and mounted on Octagonal pole using necessary bolts, nuts etc., complete. Single Arm Bracket with 1500 mm Stand...
Supplying and drawing Flexible Multicore Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS 8130-1984 and (Virgin) PVC insulation sheathed suitable for work...
Supplying and fixing Microprocessor Based Astronomical timer Switch with using necessary bolts, nuts and washers.
Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...
Supplying & fixing of Porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers. 32 A
Supply and fixing of 4pole power contactor with NO/NC contacts on existing wood/panel board using necessary bolts, nuts, washers and wiring etc., complete with AC-3 Rating and as per IS- 13947. 32 A
Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capa...
Fabricating supplying and mounting MS box made out SWG, suitable for floor /wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped wi...
Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipment's on the meter board using 40 mm dia 2.90 mm thick GI pipe 2.5m long buried in a pit . The pit shoul...
Supplying fixing and wiring earth electrode for grounding of lifts, transformers, DG sets etc. using 40 mm dia 2.9 mm thick 2.5m long GI pipe with GI funnel with mesh and suitable size reducer fixed o...
Supplying, fixing and wiring Electronic Trivector Meter (ETV) 5 to 20A single phase Class- 1 Accuracy with Temper Proof Energy Meter.
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
High Mask Bid Doc call-3.doc
Tender Document • 1.22 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .