8884 SPECIAL REPAIRS TO BLDG NO. T-33 AT CH(SC) AND 3 PWD AND MANGALORE ROOF AT ALC AND CERTAIN REVENUE WORKS, LOW BUDGETED WORK IN THE AREA OF GE SOUTH PUNE

Amount

Dismantling of single layer Mangalore pattern tiles or similar tiles in roofing etc complete all as specified and directed

M&L for roof tiles, Mangalore pattern Gde 'AA' interlocking at side joints laid dry complete all as specified and directed.

Fixing only for roof tiles Mangalore pattern interlocking at side joints laid dry (except tiles) complete all as specified and directed.

M&L for Ridge or hip tiles to suit Mangalore pattern roofing tiles, bedded and jointed in cement mortar 1:6 complete all as specified and directed.

Fixing only ridge or hip tiles to suit Mangalore pattern roofing tiles complete all as specified and directed.

Dismantling of plain or corrugated steel sheeting in roof covering complete all as specified and directed.

S&F 0.63 mm thick Galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with coach screws and washers, in roofs, walls etc. with grade of zinc coating 275., fixed with 'L' type or 'J' type or cranked hook in roof all as specified.

S&F 0.80mm thick Plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 complete all as specified and directed.

Dismantling battens for tiles shingles etc of any size including tiling fillets exc 15 cm spacing etc complete all as specified

M&L for IInd class HW clean sawn battens exceeding 5 and n. exc 15 sqcm in cross section, spaced at 30cm centres complete all as specified and directed.

Fixing only IInd class HW clean sawn battens at 30cm centres exc 5 and n exc 15 sqcm ( Except batten) complete all as specified and directed.

Dismantling timber scantling in any position (unframed wok) exc 40sqcm in section complete all as specified and directed.

S&F IInd class hard wood timber clean sawn as in scantling complete all as specified and directed.

S&F in repairs IInd class hard 20mm thick boarding fixed with nails in any situation planed one side with butt joints complete all as specified and directed.

Preparing surfaces of slate battens, any size and spacing prepared and treated all over (measured overall on one side only, spaces not deducted) with two coats creosote complete all as specified and directed.

M&L for filleting in any position and to any shape in CM 1:3 sectional area exc 25 sqcm but n exc 50 sqcm complete all as specified and directed.

M&L Preparatioin of new wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat pink primer complete all as specified and directed.

Dismantling timber scantling unframed in post, rafters, purlins etc under 40 Sqcm in section complete all as specified

M&L for plain fillets of IInd class hard wood exc 13 but n exc 25 sqcm in section square rectangular or triangular in section secured with screwes complete all as specified and directed.

Fixing only 2nd class hard wood plain fillets square, rectangular or triangular in sec. exc. 13 sqcm but not exc. 25 sqcm clean sawn fixed with nails complete all as specified and as directed.

M&L for preparation of old mangalore tiles using a low powered water hose and a gentle brush to clean the roof tiles and applying two coats of weather proof exterior emulsing paint on tiles complete all as directed by Engr-in-Charge. (Height upto 10m)

Demolition of stone slab/tiles of any description or thickness laid bedded & pointed in cement mortar in floors, hard standing Apron etc complete all as specified and directed

M&L for coloured Non skid ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exc 0.11 sqm but not exc 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match, over and including 20mm thick screed bed in CM (1:6).

M&L for coloured Non skid ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exc 0.06 sqm but not exc 0.11 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match, over and including 20mm thick screed bed in CM (1:6) complete all as specified and as directed.

M & L for 25 mm thick PCC (1:2:4) type B0 (12.5mm graded stone aggregate) as in leveling course of floor tiles etc complete all as specified and directed by Engineer-in-Charge.

M & L glazed colour ceramic tiles of size 300mm x 450mm x 6 to 7mm thick in dado/skirting laid over and including 10 mm thick CM (1:4) backing coat , set and jointed in neat cement slurry and pointed in coloured cement to match with colour tiles etc complete all as spcecified and directed.

Dismantling ceiling / boarding of any description, fixed in any position like ceiling,partition etc with nails including frame work of timber complete all as specified and as directed.

S&F for Gypsum ceiling board for ceiling prepainted, perforated finish 600x600x9 to 9.5mm thick in size of approved brand/make, laid over and including grid work of size 600x600mm, made out of 0.5mm thick GI tee 32x24mm for main, 25x24mm for cross tee and 20x20mm angle fixed on wall, powder coated finish on exposed faces of tee and angle, hung from ceiling using 2mm thick GI suspension wires spaced at 1200mm on main runners including making niches for fans/light at as specified and directed [Make-Saint-Gobain, Armstrong,Diamond or Equivalent.]

Taking down chowkats or frames of wooden / steel n.exc 1.5 sqm (without taking off shutters from the frames) complete all as specified and as directed.

Taking down chowkats or frames of wooden / steel exc 1.5 sqm & n.exc. 4 Sqm (without taking off shutters from the frames) complete all as specified and as directed.

Taking down shutters of any description exc 1 sqm and n exc 2 Sqm each complete all as specified and as directed.

Taking down shutters of any description exc 2 sqm and not exc 4 sqm each complete all as specified and as directed.

Taking down shutters of any description n.exc 1 sqm each complete all as specified and as directed.

S & F pressed steel frames for doors with one or more rebates incl necessary fixing lugs, hinges, lock strike plate etc complete as specified size of frame 105 x 60mm filled with PCC 1:3:6 type C-0 complete all as specified and as directed.

S & F pressed steel frames for doors with one or more rebates incl necessary fixing lugs, hinges, lock strike plate etc complete as specified size of frame 125 x 60mm filled with PCC 1:3:6 type C-0 complete all as specified and as directed.

S & F 35mm thick flush shutters, solid core construction, with block board core and plywood face panells commercial type on both faces incl 6mm thick Ist class HW (Teakwood) beading all around on edges complete all as specified and as directed.

S & F 35mm thick 1st class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass,gauze, etc. (without sash bars), edges of framing lain,chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats as specified and directed by Engr in charge.

S&F Solid PVC Door Frame of size 50mm x47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and as directed.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail;Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and as directed

Preparation of new wooden surfaces exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

S&F three track sliding window with two or more shutter with 4mm thick tinted glass one shutter using stainless steel wire cloth 0.36mm nominal dia & 1.18mm width aperture for mosquito proofing with good quality bearing handle, lock, rubber beading and glazing clips etc using following aluminium powder coated sections conforming to catalogue of 'JINDAL' or of equivalent make complete all as specified and directed by Engr-in-Charge. (a) Bottom frame - 20620 (b) Top frame & vertical - 20621 (c) Handle (side) - 20606 (d) Shutter inter lock - 20724 (e) Shutter top & Bottom - 20844 (f) Glazing clips - 19352.

S&F fixed glass ventilators using 5mm thick plain glass and following aluminium powder coated sections conforming to catalogue of 'JINDAL' or of equivalent make and rubber beading etc all as directed. (a) SP - 20048 (b) Glazing clips - 19352. complete all as specified and directed by Engineer-in-Charge.

S & F butt hinges 100mm size MS cold rolled medium weight complete all as specified and as directed.

S & F butt hinges 75mm size MS cold rolled medium weight complete all as specified and as directed.

S&F aluminium anodised barrel tower bolts of extruded section 200 mm long complete all as specified and as directed.

S&F aluminium sliding door bolts with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section etc length of bolt 300 mm complete all as specified and as directed.

S&F alum anodised handles, fabricated type, of size 150 mm complete all as specified and as directed.

S &F 300mm MS ordinary rat tail rod pattern spring including roller and roller plate complete all as specified and as directed.

S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.18 mm & fixed with stainless steel wire staples complete all as specified and as directed.

Demolition of cement concrete in ground floors and paving not exc 15cm thick (below or above ground level) un-reinforced complete all as specified and as directed.

M&L PCC 1:3:6 Type C-2 using (40mm graded stone aggregate ) 75mm thick finished even and smooth without using extra cement as in plinth protection, PCC path complete all as specified and as directed.

Dismantiling of PCC Block/Brick masonry work in any description/position including removing debris from the site complete all as directed by Engr-in-Charge.

M & L for brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM (1:6) complete all as specified & directed by Engr-in-Charge.

Taking down cement plaster on brick/ block walling including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed.

Rendering 10mm thick in cement mortar 1:6 on concrete surfaces finished with sagol finish to plasterred surface by using readymix plaster etc complete all as specified. [Make :- godrej,Buildwell,Ascolite]

Rendering 15mm thick in CM 1:4 on stone surface finished even and smooth with thin layer of sponge finish by using readymix plaster complete all as specified and as directed. [make :- godrej,Buildwell,Ascolite]

Rendering 5mm thick in CM 1:3 on concrete surface finished even and smooth with a thin layer of sagol as in ceiling by using readymix plaster complete all as specified and as directed. [Make :- godrej,Buildwell,Ascolite]

M&L for applying three coats of white wash on ceiling and incl. preparation of new plaster surface complete all as specified and as directed.

M & L preparation of new plastered surfaces of walls & applying two coats of weather shield acrylic latex paint which gives 5 year of performance warranty complete all as specified and as directed. (Make : Burger/Nerolac/Asian paint)

Preparing newly plastered surfaces of walls and applying two coats of oil bound distemper over a coat of alkali resistant primer complete all as specified and as directed.

Prepration of old painted wooden surfaces exc 10 cm width or girth and applying one coat of synthical enamel paint all as specified and directed

S&F towel rail 600mm long of PTMT fixed with and including chromium plated brass screw and wooden /plastic cleats complete all as specified and as directed

Dismantling of AC sheet corrugated, or semi corrugated in roof covering complete all as specified and as directed.

S & F roof sheeting prepainted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick, 150GSM of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and directed.

S & F roof sheeting prepainted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick , 150GSM of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and directed.

Dismantling of structural steel work including doors,gates but excluding framed Truss etc complete all as specified

Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted,or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and as directed.

Preparation of new steel surfaces exc 10cm width or girth and applying two coats of synthetic enamel paint complete all as specified and as directed.

S&F in repair cast iron Nahani trap with grating of diameter of outlet 75mm including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) complete all as specified and as directed.

Taking up or down carefully steel tubing and connection s including cleaning for refixing or removal to store of following size :-

15mm bore

20mm bore

S&F GI tubing tubes "medium grade" galvanized with all fittings and fixed complete to walls and ceiling or laid in floors etc. of following size :-

15mm bore

20mm bore

Refixing old steel tubing and connections in new or old position (wall, ceilings, floors etc) of following size :-

15mm bore

20mm bore

M&L for Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills,sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring,etc., and making good, cutting not exc 10 cm girth complete all as specified and as directed

S & F in repair for Wash Hand basins, Vitreous China, white, flat back, size 550x400mm, including cutting for and pinning in ends of brackets or erecting stand, angle bracket (but exclusive of fixing of supply, waste pipe, taps) complete all as specified and directed.

S&F Pillars taps CP 15mm dia , cast copper alloy with capstan heads, screwed down high pressure with long screwed shanks and flynuts screwed for iron pipe and fixed in repairs all as directed by EIC.

S&F 15mm bore bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipes fancy type chromium plated all as specified fixed in repairs.

S & F aluminium powder coated brackets suitable for 20mm dia curtain rod (minimum projection from wall 75mm) fixed in wall including drilling, rawl plug, screws etc complete all as specified and directed by Engineer-in-Charge.

S&F aluminium powder coated fancy type curtain rod 20mm bore all as specified and directed by Engr-in-Charge.

Excavating in post holes (or similar holes) in hard/dense soil each n exc 0.5 cu. m, getting out, incl returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm complete all as specified and as directed.

M&L for PCC 1:2:4 type B2 (using 40mm graded stoane agg ) as lean concrete in foundation filling complete all as specified and as directed.

M&L for Pre- painted galvalume aluminum zinc coating AZ-150, GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified in roof, wall etc complete all as specified and as directed.

M & L mild steel rolled section (conforming gde Fe-410-W) as in roof trusses (framed) rafters, trussed purlins including distance pieces,cleats,base plates and running rails and guides for sliding doors, fixed with angle cleats or other connecting plates etc including welding work complete all as specified and directed by the Engineer-in-Charge

Preparing surfaces of steel exceeding 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.

Surface excavation n.exc 30cm deep and averaging 15cm deep and getting out in hard / dense soil complete all as specified and dircted.

M&L for PCC 1:4:8 Type D-2 using (40mm graded stone aggregate ) 75mm thick as in sub-base complete all as specified and as directed.

Excavation in trenches not exc 1.5 m wide and not exc 1.5 m in depth for foundation etc or for shafts,wells cessipts manholes pier holes etc and getting out in hard /dense soil etc complete all as specified and directed .

M & L for PCC 1:4:8 type D2 (using 40mm garded aggregate) as in foundation filling and mass concrete complete all as specified and directed.

Returning filling in including spreading levelling watering and well ramming in layers not exc 25 cm complete all as specified & directed.

Removal of excavated material not exc 50M and deposited where directed at a level n.exc 1.5M above from starting point in soil complete all as specified and as directed.

M&L for moorum Filling in including spreading levelling ,watering and well raming in layers not exc 15cm thick complete all as specified & directed.

M&L for preparation of surface and applying two coats of cement base paint over a coat of cement base primer on new surface of wall complete all as specified and as directed

S & F vitreous china wash down water closet pan "Pedestal" coloured including fixing bolts etc including PVC seat cover white with flat bottom including MS, CP or aluminium anodised hinge devices including PVC low level flushing cistern 10 Ltr capacity with all internal fitting, inlet, outlet pipe connections etc complete all as specified and direcrted.

S&F looking mirror of size 600 x 450mm approved quality and make , mounted on 6 mm thick plywood commercial as backing and aluminium powder coated frame all around on edges complete as directed by Engr-in-Charge.

Dismanting water tank of capacity exc 500 & n exc 1000 ltr and reomoving to store complete all as specified and as directed.

S&F Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) 1000 lit capacity hoisted and fixed in position all as specified in SSR Part I complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement ,mortar bedding (but not backing),removing rubbish off the premises etc, complete all as specifiedand directed.

Demolition of cement concrete(unreinforced) of any description and in any position not otherwise specifically provided including floor finishes complete all as specified and directed.

M&L for 25 mm thick plain cement concrete type B-1 (1:2:4) ( 20 mm graded stone aggregate ) as in floors complete all as specified and directed.

M&L for coloured vitrified tiles 600 x 600 x 8 mm thick as in flooring, set and jointed in neat cement slurry and pointed in coloured cement to match with tiles, laid over and including 20mm thick screed bed in CM (1:6).

M&L for coloured vitrified tiles as in skirting/dados, set and jointed in neat cement slurry and pointed in coloured cement to match with tiles, laid over and including 10mm thick backing coat in CM (1:4) including triangular filleting in CM 1:4 on top of tiles.

M&L for coloured glazed ceramic tiles of size 600x300x7mm thick of colour and pattern as approved by GE, as in vertical surface set and jointed in neat cement slurry using grey cement and pointed in coloured cement to match the colour of tiles over and including 10mm thick backing coat in CM (1:4) in etc complete all as specified and as directed.

M&L for Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over and including backing coat 10mm thick in CM (1:4) complete all as specified and directed.

M&L for 20mm thick Granite (of any type/colour) work (table rubbed and polished) in steps, pillars;window cills/jamb, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite. as counters of any radious etc laid over 15mm thick screed bed in CM (1:6) complete all as spcecified and directed.

Labour only for full round moulding to 18 to 20mm thick granite slab all as directed by Engineer-in-Charge.

S & F Machine cut cuddappa stone slab 20 to 25 mm thick for making cooking platform etc. complete all as specified and directed.

M&L for 19mm thick prelaminated particle board both side decorative face, including providing second class hard wood 6mm thick beading for edges of boardalround all as specified and directed by Engr in Charge.

S&F in repairs 40 mm dia polished hardwood cupboard Knobs fixed with nuts, screws and washer of brass polished complete all as specified and as directed.

S & F in repair contionous hinges MS bright finish or electro galvinised with of flaps 30mm complete all as specified and as directed.

S&F in repairs Magnet catches and striking plate complete all as specified and as directed.

M&L(SWG) gulley trap 150mm setting and jointing with solvent cement complete all as specified and as directed.

Dismantling of CI / AC/ PVC pipes of various dia jointed in CM or adhesive 75 to 100mm dia complete all as specified and as directed.

S&F for 110 mm dia PVC SWR pipes single socketed in any length with rubber ring joints fixed to wall including clamp etc complete all as specified and as directed.

S&F for 75 mm dia PVC SWR pipes single socketed in any length with rubber ring joints fixed to wall including clamp etc complete all as specified and as directed.

S&F PVC (SWR) bends any radius 110 mm bore complete all as specified and as directed.

S&F PVC (SWR) bends any radius 75 mm bore complete all as specified and as directed.

S&F in repairs vitreous china, squatting pan, 'Orissa' pattern, size 580 x 440mm white, with integral foot rest, including concrete bedding and PVC flushing cistern 10 Ltr capacity including all internal fitting, inlet, outlet pipe connections etc. complete all as specified and directed.

S&F brass chromium plated shower rose with or without swivel joints, any size including fixing to a steel pipe or union of size 125mm size complete all as specified and as directed.

S&F in repair sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs,washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x160mm complete all as specified and as directed.

S&F stainless steel, sink 1 mm thick for kitchen or laboratory, with plugs, waste pipe, washers; incl bedding in cement mortar on to dwarf wall or including fixing cantilever CI Brackets, connecting union etc & connecting to inlet/out let for smooth functioning size of sink 495 x 420mm overall and bowl size 410mmx330mmx160mm, including PVC connection, CP waste coupling, etc. complete all as directed by Engr-in-Charge

S&F in repairs 15mm bore bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipes all as specified

S&F, in repair, CP stop valve 15mm dia cast copper alloy, screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipes for unions and fixed in repair.

M&L for Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished dark shade, area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match in floors etc over 15mm thick screed bed in CM (1:6), complete all as specified and directed.

All as per Item No. 122.00 above but on vertical surfaces,over 10 mm thick backcoat in CM (1:4) complete all as specified and as directed.

M&L for Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre complete all as specified and directed.

S&F 8 mm thick seamless calcium silicate ceiling made out of 1800 x 1200 mm size board of siliceous & calcareous material reinforced with cellulose fibre fixed to the ceiling section with 25 mm long self drilling & tapping screws having Phillips head with under head cutter at 200 mm C/C including finishing the joint of face board with specially formulated jointing compound & 48 mm wide fibre tape to provide seam less finish ( Frame work for ceiling shall be measured & paid separately) complete all as specified and directed. (Note for item No 124.00 & 125.00 : Cost of making framework for light fittings/ grills/ diffusers and cutting to shape in ceiling etc shall be deemed to be included in the quoted rate of item.

Dismantiling wrought iron or mild steel work of any description not otherwise provided for

Preparing surfaces of steel and iron work new or old treating small articles such as stops covers gully grating holdfast and similar work are n exc 0.1 sqm each treating with tar or coal tar black paint complete all as specified and as directed.

M&L for preparing old steel or iron surfaces of any description over 10cm in width or girth and applying two coats of synthetic enamel paint complete all as specified and directed.

Fixing only roof sheeting prepainted galvalume aluminium zinc coating GI based corrugated steel sheet of any description as in roof covering / cladding to wall, fixed with self tapping screws as specified.

Fixing only Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any decription as in roof ridge, fixed with self tapping screws as complete all as specified and directed

M&L for Erection and fixing only for rolled mild steel conforming to grade E-250 (Fe-410W, quality A) as in main and cross beams, hip and jack rafters, purlins, where connected to common rafters and running rails and guides for sliding doors, fixed with angle clips or other connecting plates complete all as specified and as directed.

Labour only for PCC block masonry, straight or curved on plan exc 6m mean radius, but including built in CM (1:6) complete all as specified & directed by Engr-in-Charge.

M&L for rendering 15 mm thick in cement morta 1:4, on fair faces of brick or concrete surfaces, finished even and smooth without using extra cement all as specified and directed.

M&L for PCC (1:2:4) type B-1 (using 40mm graded stone aggregate ) as in flooring ,40mm thick ,surface finished even and smooth and spike rolling impression complete all as specified and directed

M&L for 38mm wide glass dividing strips, 3 mm thick and inserted in position, conform to design complete all as specified and as directed.

Taking down carefully exising unserviceable aluminium point wiring (light, fan, socket or power), complete (fitting such as switches,ceiling rose, pendent, regulators etc) removing material to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately and making dood disturbed surfaces of wall, floor etc. complete all as specified and as directed.

Taking down the existing unserviceable main switch / cut out / DBs of any type / capacity / description as existing at site including necessary making good the disturbed surfaces to match with the existing finishes all as specified.

Taking down of old unserviceable sub main wiring of any type complete all as specified and as directed.

M & L for Point wiring using approved colour coding as per IS, with multistranded copper conductor 1.5 Sq. mm (nominal area), two single core, PVC insulated and unsheathed FRLS cable 1100 volts grade ISI-694 marked drawn through in and including heavy duty, PVC concealed conduit of white/ ivory colour including all accessories after chasing in wall/ceiling etc, heavy duty ISI marked, with GI sunken boxes 1.2 mm thick, 60 mm deep with earth dolly duly, covered with modular white cover plate with frame suitable for modular switches, including PVC insulated multistranded copper conductor 1.5 Sqmm (nominal area) single core FRLS cable as earth continuity conductor to common earth and connecting to earth dolly all as specified and directed for the following :-

One light point controlled by one, one way switch 5 Amps complete all as specified.

One fan point/ exhaust fan point controlled by one, one way switch 5 Amps and regulator complete all as specified.

One 3 pin 5 Amps switch socket outlet point controlled by one switch on independent board complete all as specified.

One 3 point 5 Amps switch socket outlet point controlled by one switch on the same board complete all as specified.

One bell point controlled by one, bell switch 5 Amps complete all as specified.

All as per item No. 140.00 above but with stranded copper conductor 2.5 Sqmm (nominal area), single core, PVC insulated and unsheathed multistranded FRLS cable 1100 Volt grade ISI-694 marked for 3 pin, 15 Amp socket outlet on independent board including PVC insulated multistranded copper conductor 2.5 Sqmm (nominal area) single core FRLS cable as earth continuity conductor to common earth and connecting to earth dolly complete all as specified.

S & F for modular Bell push modular 6 Amps single module complete all as specified.

Suply and fix for Bell Electric Ding dong type suitable for operation on 230 volt 50 HZ A C supply including removal of old unserviceable one complete all as specified and as directed

S & F for Modular switch one way 6 Amps, 1 module complete all as specified.

S & F for Modular switch one way 16 Amps, 1 module, with neon indicator complete all as specified.

S & F for celling rose 2/3 terminals, PVC/ polycarbonate, isolated body ISI marked complete all as specified.

S & F for modular step type fan regulator 120 watt single module suitable for operation on 230 volt 50 HZ AC supply complete all as specified and as directed

S & F for Modular socket, 6 Amps, 2/3 pin combination 2 module complete all as specified.

S & F for Modular socket, 6/16Amps, 2/3 pin combination 2 module complete all as specified.

S & F for lamp holder, PVC/ Polycarbonate type with back plate suitable for batten/ slanting fittings complete all as specified.

S&F vertical 8 way TPN double door recess mounted/wall mounted MCCB's as incommer is 3 pole V- Tec of 100 amps rating & 16 KA breaking capacity MCCB is pre fitted at factory & including price of MCCB all as directed and spd by engr in charge Cat Part No DBVTH004SD L&T equivalant to Havells/Legrand all as specified and as directed.

S&F MCB DB,SPN, sheet metal enclosure, 4 way with 200 amps rated bus bar double door, with locking arrangement fixed in wall including cutting & good to disturbed surfaces,all as specified and directed.

S&F MCB DB,SPN, sheet metal enclosure, 8 way with 200 amps rated bus bar double door, with locking arrangement fixed in wall including cutting & good to disturbed surfaces,all as specified and directed.

S & F for MCB Single pole and neutral rated capacity 40-63 amps, 240 Volts breaking capacity 10 KA complete all as specified and as directed.

S & F for MCB Single pole rated capacity 5 to 32 amps, 240 Volts breaking capacity 10 KA complete all as specified and as directed.

M & L for Sub main wiring with approved colour coding as per IS with two single core PVC insulated FRLS cable with stranded copper conductor of size 6.0 Sqmm nominal area and drawing into PVC non metallic rigid PVC casing caping including one run of PVC insulated 6 Sqmm (nominal area) stranded copper conductor FRLS cable as earth wire complete all as specified and as directed. [Note :- Two runs of 6.0 sqmm cable,one run of 6.0 sqmm cable and one run of PVC casing caping will be measured as one unit all as specified and as directed.]

M & L for Sub main wiring with approved colour coding as per IS with two single core PVC insulated FRLS cable with stranded copper conductor of size 4.0 Sqmm nominal area and drawing into PVC non metallic rigid heavy duty PVC conduit of white/ ivory colour and its accessaries ISI marked heavy duty of suitable size concealed in wall etc including one run of PVC insulated 4.0 Sqmm (nominal area) stranded copper conductor FRLS cable as earth wire complete all as specified and as directed. [Note:- Two runs of 4.0 sqmm cable,one run of 4.0 sqmm cable and one run of PVC conduit will be measured as one unit all as specified and as directed.]

S & F wall mounted LED 20 watts , LED batten for surface and pendant application, Anodized extruded aluminium housing, high transmissitivity diffuser and high lumen output, 230 volts etc complete with all accessories internally pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting complete all as specified and as directed. Make Bajaj Cat part No BCLAB 20W or its equavalent in Philips, Wipro, Havells. all as specified and as directed.

S & F for LED 10 watts batten aluminium extruded with decorative end caps including removal old unserviceable T8 type light fitting complete all as specified and as directed. Make- Bajaj Cat Part No BCLSB 10 WH, Wipro Cat part No LL20-111-XXX-65-NE or its equvalent in Philips, Havells all as specified and as directed.

S & F for Energy saving new generation environmental friendly long life versatile presure die cast aluminium IP 66 for security light fitting luminaire with high power LEDs as light source and electronic driver of capacity 25 watts with pre wired and necessary mounting arrangementsnd provision of 2.5 sq mm three core copper conductor cable multi stranded from ceiling rose to light fitting including necessary dia GI pipe medium grade bracket 1.5 mtr long bend to required shape and including taking down old unserviceable existing light fitting of any description complete all as directed by Engineer- in-charge. Make :- Bajaj Cat No BCLST 25W LED I, Philips Cat Part No BRP042 or its equvalent in Wipro all as specified and as directed.

S & F for Decorative wall mounted luminaire made out of polycarbonate with unbreakable globe suitable for LED bulb and including provosion of LED bulb 10/11 watts complete all as specified and as directed. Make- Havells Cat part No -LHGLO6160099 or its equivalent in Wipro, Philips, Bajaj all as specified and as directed.

Taking down ceiling fan of any size/sweep after disconnection the wire from existing ceiling rose and refixing the same after cleaning dust, oiling greasing etc including provinding flexible three core wire of size 23/.0076 from ceiling rose to connector of fan all as specified and as directed.

Dismentling and taking down old unsv meter box any type any size and making good with disturbed surface filling of bricks works and cement plaster including of two coat of cement base paint and replacement with new electric meter box suitable for three phase electric meter with MCB TPN 40 amps made out of two mm thick CRCA MS sheet with transparant door for meter reading all as all as specified and as directed.

S & F for metal body exhaust fan, AC single phase, heavy duty, turbo force 240 V of size 200 mm sweep with louvers including necessary connection and replacement of flexible copper cable from ceiling rose and taking down of old unserviceable fan complete all as specified and as directed. Make - Bajaj Cat Part No -Maxma DX 8" or its equivalent in Crompton/Havells all as specified and as directed.

M & L for Earthing complete with galvanised steel earth plate electrode 60 x 60 cm x 6 mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0 mm as earth lead wire by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in Electrical plate No 3, SSR Part I- 2009 with 15 mm dia medium grade GI pipe as a protection and 20 mm dia medium grade GI pipe for watering purpose inlcuding funnel, wire mesh, RCC pit with cover complete and connected to earthing test point all as specified or indicated including testing on completion all as specified and as directed.

Excavating in trenches not exceeding 1.5 meter in wide and not exceeding 1.5 meter depth and getting out in hard/Dense soil complete all as specified and as directed

Material and labour for sand cushioning with dry river sand in trenches for cushioning of underground cable line including spreading, leveling, well ramming completed all as directed.

Supply and laying well burnt sub class ‘B’ bricks (designated 75) locally available best quality laid dry in trenches for protection of underground cable all as directed

Returning, filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25cm complete all specified and as directed.

Removing excavated soil to a distance not exceeding 50 meter and depositing where directed at a level not exceeding 1.50 meter above the starting point complete all as specified and as directed.

M&L for galvanised tubing 50 mm light grade with all fittings laid in trenches all as directed by Engineer in Charge.

Supply, laying and testing cable XLPE Insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 25.0 sq mm 4 core complete all as specified and as directed.

M & L for cutting and making a hole into or through cement concrete or stone masonary wall of thickness upto 45 Cm and in grith n.exc. 45 cm for fixing exhaust fan of size 300 mm sweep and providing fastners grouted in wall four nos inide for fixing of Exhaust fan and four nos outside for louvers and redressing the surface and making good with cement plaster 1:4 to match with existing surface incl lime white wash complete all as specified and as directed.

M&L for laying of Reinforced concrete pipes,class NP2 with one collar per lengh of pipe of dia 100 mm, 2 nos half round ( for bottom and top )and before laying exacaved area shall be levelling complete all as specified and directed Engr-in-charge.

S&F modular cover plate with frame 2 module complete all as specified and as directed. (Make : Legrand)

S&F modular cover plate with frame 3 module complete all as specified and as directed.Make : Legrand

S&F modular cover plate with frame 4 module complete all as specified and as directed.Make : Legrand

S&F modular cover plate with frame 6 module complete all as specified and as directed.Make : Legrand

S&F modular cover plate with frame 8 module complete all as specified and as directed.Make : Legrand

S&F modular cover plate with frame 12 module complete all as specified and as directed.Make : Legrand

S&F modular metal flush box 2 module complete all as specified and as directed.Make : Legrand

S&F modular metal flush box 3 module complete all as specified and as directed.Make : Legrand

S&F modular metal flush box 5 module complete all as specified and as directed. Make : Legrand

S&F modular metal flush box 6 module complete all as specified and as directed. Make : Legrand

S&F modular metal flush box 8 module complete all as specified and as directed. Make : Legrand

S&F modular metal flush box 12 module complete all as specified and as directed. Make : Legrand

S&F industrial metal clad socket 2P+1N complete with metal clad 3 pin top and MCB SP 32A in sheet metal enclosure all as specified and directed. Make : Legrand

Dismentling and taking down old unsv meter box any type any size and making good with disturbed surface filling of bricks works and cement plaster including of two coat of cement base paint and replacement with new electric meter box suitable for single phase electric meter with MCB DP 32 amps made out of two mm thick CRCA MS sheet with transparant door for meter reading all as all as specified and as directed.

Vijay Construction and Company