ADDITION / ALTERATION TO BLDG No P-162 (COMMUNITY HALL FIRST FLOOR) IN DRDO TOWNSHIP, PHASE - I, C V RAMAN NAGAR, AND PROVSION OF EXHAUST FANS TO B, C, E - TYPE BLOCKS IN ALISDA RESIDENTIAL AREA, BENGALURU

Amount

Demolition of brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, separating and stacking the serviceable material and disposing the unserviceable material outside MD land complete all as specified and directed.

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for; and disposing of debris outside MD land complete all as specified and as directed.

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc., complete and disposing the unserviceable material outside MD land complete all as specified and directed.

Dismantling roof sheet (corrugated, semi corrugated etc) covering all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.

Taking down Chowkats or frames with shutters (without taking off shutters from the frames) area of opening not exceeding 1.5 sq m each all as specified and as directed.

Material and labour, Pre-cast cement concrete block masonry with grade ‘C’ solid blocks exceeding 10 cm in width, having minimum compressive strength of 50 Kg / Sqcm as per IS 2185 (Part- I) 2005 and set in CM 1:6 complete all as specified and as directed.

Material and labour, Pre-cast cement concrete block masonry with grade ‘C’ solid blocks not exceeding 10 cm in width, having minimum compressive strength of 50 Kg / Sqcm as per IS 2185 (Part- I) 2005 and set in CM 1:4 complete all as specified and as directed.

Material and labour for Plain Cement Concrete (1:2:4) type B1, using 20 mm graded stone aggregate as in coping, kneelers, kerbs, benching and the like including necessary formwork etc complete all as specified and as directed.

Supply only liquid water proofing compound all as specified and as directed.

Supply and fix, 30 mm thick Factory made solid panel PVC door shutter consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat molded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Paneling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement complete including Solid PVC door frame of size 50 mm x 47 mm made out of 5 mm thick plain colour PVC sheet reinforced with MS square tube, including making good to jambs with cement mortar (1:4) and finished to match with existing surface complete all as specified and as directed.

Material and labour for Steel ventilator with top hung shutter including hinges, steel peg stay, complete all as specified and as directed.

Material and labour for powder Coated aluminium frames and shutters (minimum thickness of powder coating 50 microns) and fabricating of doors, windows, ventilators and fixed partitions with one or more rebates including necessary joining cleat, glazing clips, rubber packing, snap bending crews etc. complete all as specified and as directed. Note :- i) For payment purpose, weight of aluminium section only shall be measured and paid, ii) Cost of aluminium mongery. lock, rubber packing, rollers for sliding shall be deemed to include in the quoted rate and nothing extra will be measured and paid,, iii) Supply and fixing of Sheet glass and wire gauge shall be measured and paid for separately under respective items.

Supply and fix, Aluminium anodized barrel tower bolts of extruded section, 150 mm long all as specified and as directed.

Supply and fix, 150 mm Aluminium extruded alloy anodized handles, cast type complete all as specified and as directed.

Supply and fix, 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed.

Supply and fix, floor door stopper, 150 mm length of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and as directed.

Supply and fix Stainless steel Butt hinges, 100 mm long fixed with screws complete all as specified and as directed.

Taking down tubular curtain rod, supply and fixing drapery rod, decorative type, made of 25 mm dia chromium plated (wall thickness not less than 1 mm), bright finish, colour and pattern as approved by GE, complete all as specified and as directed. (Note : Price shall not be less than 100/- per RM, Make : Aerolux / Vista / MEC)

Taking down brackets for curtain rod, supply and fixing brackets suitable for chromium plated, drapery rod of 25 mm dia, with wall thickness not less than 1 mm thick, bright finish, colour and pattern as approved by GE, complete all as specified and as directed. (Make : Aerolux / Vista / MEC)

Supply and fix, stainless steel wire cloth 0.36 mm nominal dia of wire, and of average width of aperture 1.4 mm, fixed with stainless steel wire staples complete all as specified and as directed.

Material and labour for rolled mild steel sections as in main & cross beams, hip & jack rafters, purlins where connected to common rafter and running rails & guides for sliding doors, fixed with angle cleats or other connecting plates of Fe 410 -W (Gde-E- 250) quality- A all as specified and as directed.

Material and labour for Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc.of Fe 410 -W (Gde-E- 250) quality- A all as specified and as directed.

Material and labour for Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exceeding 5 cm and not exceeding 10 cm long, dia of shank of 16 to 20 mm, complete all as specified and as directed.

Material and labour for mild steel Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, with riveted, bolted or welded attachment of grade Fe 410-W (Gde-E- 250) quality-A, complete all as specified and as directed.

Supply and fixing Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified and as directed.

All as per item No. 26 here- in- above but plain steel sheet all as specified and as directed.

Supply and fix 12 mm thick pre-laminated particle board, interior grade, pre-laminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work as in cupboards, shelves and providing 6 mm thick teakwood edging / lipping, etc., complete all as specified and directed.

Material and labour, for 18 to 20 mm thick Granite work (of any type), table rubbed and mirror polished), in steps, jambs, pillars, window-cills, cooking platform and like set in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, making hole for gas pipe, edges made half round, laid over and including screed bed or bedding layer of 15 mm thick in CM (1:4), complete all as specified and as directed.

Material and labour, for 25 mm thick Plain Cement Concrete 1:2:4, type B0, using 12.5 mm graded stone aggregates as in floor finishings, finishing the surfaces rough and even to receive screed bed / bedding layer complete all as specified and as directed.

Roughening surfaces of old concrete floor by picking, sweeping, cleaning and washing down with water and remove dust, including making the surfaces to receive tiles as required, complete all as specified and as directed.

Material and labour, non-skid Ceramic coloured tiles 7 to 8 mm thick (Grade B-IIA), area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, as in flooring, set and pointed in white or coloured cement to match colour of tiles over and including 15 mm thick screed bed in CM (1:6) complete all as specified and as directed.

Material and labour, for Glazed ceramic coloured tiles, of size 300 x 450 x 7 mm thick (Grade B-IIA) as in vertical surfaces such as skirting, dado etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles, laid over and including provision of backing coat of 10 mm thick rendering in CM 1:3, complete all as specified and directed.

Material and labour, Vitrified tiles flooring with Light shade 10 mm thick (Square / rectangular), tiles, area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm, set and jointed in neat cement slurry and pointed in white or coloured cement to match colour of tiles over and including 5 mm thick screed bed with polymerized Latecrete as per manufacturers instructions complete all as specified and as directed.

Material and labour, Vitrified tile, skirting/dado, light shade with 10 mm thick tiles of area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm, on vertical rates as in skirting, dado, etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match colour of tiles over and including backing coat of 10 mm thick CM 1:4 complete all as specified and as directed.

Rendering 15 mm thick on brick or concrete surfaces of walls, in cement mortar (1:4) and finishing the surfaces even and smooth without using extra cement, including mixing water proofing compound all as specified and as directed. Note : Supply only water proofing compound will be measured and paid separately.

Rendering 15 mm thick on brick or concrete surfaces in cement mortar (1:6) and finishing the surfaces even and smooth without using extra cement all as specified and as directed.

Material and labour, for rendering 5 mm thick on brick or concrete ceiling surfaces in cement mortar(1:3) and finishing the surfaces even and smooth without using extra cement complete all as specified and as directed.

Preparation of new or previously untreated plastered ceiling surfaces of any description not otherwise described and applying two coats of oil bound distemper over a coat of alkali resistant primer, complete all as specified and as directed.

Preparation of new or previously untreated plastered wall surfaces of any description not otherwise described and applying two coats of oil bound distemper over a coat of alkali resistant primer, complete all as specified and as directed.

Preparation of newly plastered wall surfaces of any description over 10 cm in width or girth not otherwise described and applying two coats of weather proof exterior emulsion paint over a coat of weather proof primer complete all as specified and directed.

Supply and fix Plain Sheet glass 5.5 mm thick, ordinary quality and glazing with and including neoprene packing fixed to aluminium windows / ventilators with aluminium cleats (channel) area not exceeding 0.5 sq. m in each pane all as specified and as directed.

Supply and fix Figured glass, 3 mm thick, pin head type and glazing with and including neoprene packing fixed to aluminium windows / ventilators with aluminium cleats (channel) area not exceeding 0.5 sq. m in each pane all as specified and as directed.

Preparation of new steel surfaces exceeding 10 cm in width or girth, applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and as directed.

Complete removal of existing treatment from surfaces of ceilings by scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots with wire brushes and removing existing loose particles etc., not otherwise described and applying two coats of oil bound distemper over a coat of alkali resistant primer over and including 2 mm thick wall internal grade wall care putty, finishing surfaces even and smooth, complete all as specified and directed.

Complete removal of existing treatment from surfaces of walls, pillasters, cornices, etc., by scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots with wire brushes and removing existing loose particles etc., not otherwise described and applying two coats of oil bound distemper over a coat of alkali resistant primer over and including 2 mm thick wall internal grade wall care putty, finishing surfaces even and smooth, complete all as specified and directed.

Complete removal of existing treatment from surfaces of walls, pillasters, cornices, etc., by scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots with wire brushes and removing existing loose particles etc., not otherwise described and applying two coats of weather proof anti-fungal exterior emulsion paint over a self coat of weather coat primer, finishing surfaces even and smooth, complete all as specified and directed.

Material and labour, 15 mm bore Galvanized Iron tubing, medium grade, with all fittings fixed to wall/ ceiling or laid on floors, walls, ceiling, etc. ., complete all as specified and as directed.

Material and labour, 20 mm bore Galvanized Iron tubing, medium grade, with all fittings fixed to wall/ ceiling or laid on floors, walls, ceiling, etc. ., complete all as specified and as directed.

Taking down eaves gutters, soil / waste / vent pipes / rain water pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., Supply and fix, PVC (SWR) pipes 110 mm dia single socketed in any length with solvent cement joints laid under floor or on walls fixed as soil / waste / vent pipes with Stack clamps made out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall complete all as specified and as directed.

Taking down eaves gutters, soil / waste / vent pipes / rain water pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., Supply and fix, PVC (SWR) pipes 75 mm dia single socketed in any length with solvent cement joints laid under floor or on walls fixed as soil / waste / vent pipes with Stack clamps made out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall complete all as specified and as directed.

Supply and fix UPVC (SWR) bends any radius 110 mm dia without oval access door, fixed in pipes, complete all as specified and as directed.

Supply and fix, 75 mm bore, UPVC (SWR) junction, Single 'T' equal or unequal with access door, complete all as specified and as directed.

Supply and fix, 110 mm bore, UPVC (SWR) junction, Single 'T' equal or unequal with access door, complete all as specified and as directed.

Supply and fix, Vitreous china snow white colour floor mount type European Water Closet of size 520 x 360 x 390 mm with PVC seat cover and 'P' trap, fixing at a distance of 300 mm from wall with bolt including connection with flushing cistern and with outlet pipe complete all as per Model CONVENTIONAL, Cat Part Nos B1510101 & S1050102 of CERA Make or equivalent in other makes complete all as specified and directed.

Supply and fix, in repairs, PVC valve less, syphonic action type, white colour flushing cistern, 10 litres capacity, low level, white, with inlet, ball valve, float and handle including brackets and jointing with existing flush pipe and making good to the disturbed surfaces complete all as per Model No: CIENA PREMIUM Cat Part No B1010101 of CERA Make or techno commercial equivalent in other makes complete all as specified and directed.

Supply and fix brass body Health faucet with and including 1.50 m long, flexible tube in chrome finish, wall hook with NRV (back flow preventer), all as per Cat Part No F8030301 of Cera or techno commercial equivalent in other makes complete all as specified and directed.

Supply and fix, in repairs, Bib taps 15 mm dia, fancy type, chromium plated with CP flange all as per Cat No. F3001151 of Cera or equivalent in other makes specified complete all as specified and as directed.

Supply and fix, in repairs, Pillar taps, 15 mm dia, fancy type, chromium plated with CP flange, long shank all as per Cat No. HT F3001103 of Cera or equivalent in other makes specified here-in-after, complete all as specified and as directed.

Supply and fix, toilet paper holder with flap guard, fixed to wall with CP brass screws and PVC cleat complete all as specified and as directed. Make: Cat Part No F5002110 of Cera or techno commercial equivalent in other makes, complete all as specified and as directed.

Supply and fix, Vitreous china snow white, wash hand basin of size 510 mm x 400 mm all as per Cat No. No.S 2040101 of Cera or techno and commercial equivalent makes specified including supply and fixing PTMT waste coupling of 32 mm dia (minimum weight 45 grams), including 32 mm dia PVC waste pipe of minimum 800 mm long all as specified and as directed.

Supply and fix, in repairs, Angular stop cock, fancy type, with chromium plated wall flange, cast copper alloy, screwed both ends for iron pipe or for brass ferrule,15mm dia, complete all as specified and directed. MAKE:- Cat No. HT F3001201 of CERA or techno-commercially equivalent model in any one of the make as mentioned in list of makes here-in-after.

Supply and fix in repairs, Stop valves (concealed), fancy type with CP wall flanges, chromium plated, cast copper alloy with long shank and exposed part kit with fittings sleeve, operating lever concealed part screwed both ends for iron pipe or for unions, complete all as per Cat No.F2006351 & F4050102 of Cera or equivalent in other makes specified here-in-after, complete all as specified and as directed.

Supply and fix, gun metal, globe or gate valves 20 mm bore with iron wheel head screwed both ends for iron pipe including necessary cutting/threading the old pipe and provision of new fittings such as Tee, socket, elbow, union if required complete all as specified and as directed.

Supply and fix in repairs, Chromium Plated overhead shower rose of size 95 mm with swivel joints, over head shower arm of 230 mm long with wall flange, complete all as specified and as directed. Make : Cera Cat Part No F7020304 & F7040103 or techno and commercial equivalent in other makes specified after taking down old shower rose complete all as specified and directed.

Supply and fix in repairs, single tube towel rail, brass chromium plated, 600 mm long fixed with chromium plated screws and PVC cleats, complete all as specified and as directed. Make : CERA, Model No F5003103 or techno and commercial equivalent complete all as specified and as directed.

Supply and fix, brass chromium plated, fancy type, soap dish, as per Cera Cat Part No F5003106 or equivalent in other makes, and fixing with brass screws, complete all as specified and directed.

Supply and fix, PVC connecting pipe 450 mm long 15 mm dia both ends having brass coupling nut and PVC washer complete all as specified and as directed.

Supply and fix UPVC(SWR) floor trap 75 mm dia outlet with plain / single hole, CP grating, including jointing with solvent cement complete all as specified and as directed.

Supply and fixing Rotational moulded polyethylene water storage tanks (triple layered) of 500 Litres capacity with ISI mark embossed on it, (cylindrical, vertical with closed top) hoisted and fixed in position, including PTMT ball valve, high pressure, epoxy coated aluminium rod and high density plastic ball screwed for pipe of 20 mm dia complete all as specified and as directed.

Material and labour for Point wiring with PVC insulated unsheathed, multi stranded copper conductor FRLS cable of size 1.5 sq.mm, 1100 grade, with PVC insulated unsheathed multi stranded copper conductor cable of size 1.5 sq.mm for earth continuity wire, drawn into and including non metallic rigid PVC conduit of suitable size, medium grade ISI marked including metal flush boxes of suitable size, modular white cover plate and provision of blanking plates fixed with screws for mounting switches/ sockets etc fixed on walls/ roof surface concealed in walls including all necessary wall cutting and making good disturbed surface complete all as specified and directed for One light / fan point controlled by one, one way switch 5/6 Amps complete all as specified and as directed. Note : The quoted rate shall deemed to include the cost of metal flush boxes, modular white cover plate, provision of blank plates as per requirement and making the disturbed surfaces to match with the existing.

All as per Serial Item No 72 here-in-above, but for one 3 pin, 5/6 amps socket outlet point on same board controlled by one, one way 5/6 amps switch.

All as per Serial Item No 72 here-in-above, but for one 3 pin, 5/6 amps socket outlet point on independent board controlled by one, one way 5/6 amps switch.

Supply and fix Modular Switch, 6 Amps, 240 Volts, One module, One way, all as specified and as directed.

Supply and fix, piano switch, 6 Amps, 240 Volts, One way, all as specified and as directed.

Supply and fix Modular Switch, 16 Amps, 240 Volts, One module, One way, all as specified and as directed.

Supply and fix Ceiling rose surface type, Bakelite, 65 x 50 mm, ISI marked, with three terminals all as specified and as directed.

Material and labour, point wiring for power point controlled by one switch on Independent board for 3-pin, 15/16 Amps socket outlet with 2.5 sq.mm (nominal area) PVC unsheathed, PVC insulated, multi standard copper conductor cable of 1100 Volts, FRLS grade, single core cable drawn through and including non metallic rigid PVC conduit of suitable size fixed on walls / ceiling / etc. including necessary chases cutting to wall and making good the disturbed surfaces along with 2.5 sq.mm cable but in green colour as continuous earthing wire and connecting to common earth dolly complete all as specified and as directed. Note: The quoted rate shall deemed to include the cost of metal flush boxes, modular white cover plate, provision of blank plates as per requirement and making the disturbed surfaces to match with the existing.

Supply and fix Modular socket, 2 module, one way, 5/6 Amps, 2/3 pin, 240 Volts all as specified and as directed.

Supply and fix Modular type socket flush type, 3/5 pin, two module, 6/16 Amps, complete all as specified and as directed.

Supply and fix fan regulator, 2 Module, 120 W complete all as specified and directed.

Supply and fix, ceiling fan of size 1200mm sweep, BEE, 5 star rated, 1200 mm sweep, 230 V, provision of cable 3 core of size 0.5 sqmm (16/0.2mm) from ceiling rose to fan, provision of 3 mm thick circular bakelite sheet cover including writing MES No. 2 cm height with synthetic enamel black paint all as specified and as directed.

Making holes in existing wall surfaces, finishing the disturbed surfaces matching with adjoining surfaces, fixing only exhaust fan 230/240 Volt, 50 Hz, single phase, AC supply, 300 mm sweep with louvers complete with metal body powder coated with protective steel bird guard on wall of building with and including provision of 3 core 1.5 Sq.mm flexible cable from ceiling rose to exhaust fan including writing MES number on exhaust fan motor using synthetic enamel paint of approved tint, complete all as specified and directed. MAKE:- Exhaust fans will be issued under Schedule 'B' free for fixing only.

Supply, fixing and connecting MCB DB SPN 4 way (Horizontal), double door, 240 V, AC, 50 Hz, IP-42 protection conforming to IS-13032 universal mounting with 200 amps rated copper bus bar, neutral link, earth link, earthing studs, detachable gland plates with knockouts on both sides, complete CAt Part No DHDPSHODRW04 of Havells or equivalent in approved makes all as specified and as directed. Note for Serial Item No 85 & 86 :- : i) All unused modules shall be provided with blanking plate for which the cost is deemed to be included in the cost of MCB DBs. ii) MCB/ Isolators will be measured and paid separately as supply only under respecitve items.

Supply, fixing and connecting MCB DB SPN 8 way (Horizontal), double door, 240 V, AC, 50 Hz, IP-42 protection conforming to IS-13032 universal mounting with 200 amps rated copper bus bar, neutral link, earth link, earthing studs, detachable gland plates with knockouts on both sides etc complete Cat Part No DHDPSHODRW08 of Havells or equivalent in approved makes and flush to wall by grouting of wall complete all as specified and directed.

Supply only MCB, single pole, 6 to 32 Amps, 240 volts, 50 Hz, 10 KA rupturing capacity, ‘C’ series all as specified and as directed.

Supply only MCB, SPN, 32 Amps, 240 volts, 50 Hz, 10 KA rupturing capacity, ‘C’ series all as specified and as directed.

Supply and fix, LED, 20Watt, high efficient, batten surface / wall mounted with specially designed powder coated aluminium housing, high optically efficient poly-carbonate diffuser, in-built electronic driver duly wired up to terminal block, power consumption less than or equal to 20W, luminaire lumen greater than or equal to 1000lm, system efficiency greater than or equal to 100lm/w, with LED binning as per ANSI Bin C78.377A, photo biological safety report as per IEC624718 & electrical insulation class 1, ingress protection IP 20, colour rendering index CRI > 80%, temperature range 0-45 degree centigrade, driver efficiency > 85% power factor > 0.90, THD < 20% as per IEC 61000-3-2, colour temp - 6500K, surge protection 2.5KV, 50000 burning hours (minimum) as per L70 criteria, multi-stage isolated constant current operated driver with range 150-270V AC and safety extra low voltage safe level < 60V DC as per IEC Standard with LM70 & LM80 certification, complete all as specified and directed. MAKE:- Cat No. LUMILINEBS20WLED865SOCSS of Havells or techno-commercially equivalent model in Philips / Bajaj / Syska / WIPRO / CG.

All as per Serial Item No 89 here-in-above, but of 18 W, 4 feet long as per Cat Part No. LUMILINEBS18WLED830SPCWH of Havells or techno-commercially equivalent model in Philips / Bajaj / Syska / WIPRO / CG.

All as per Serial Item No 89 here-in-above, but of 9 W, 2 feet long as per Cat Part No. LUMILINEBS9WLED830SPCWH of Havells or techno-commercially equivalent model in Philips / Bajaj / Syska / WIPRO / CG.

Supply and fix, 24 W, LED, ultra modern recessed mounting, LED luminaire, 2' x 2' tiles, which provides soft-light and glare free symmetrical illumination, IP 20 protection Class I, system electrical efficiency > 85%, system efficacy > 100 lm/W, operating voltage between 140 - 270 V, AC, 50 Hz, TDH , 10%, power factor ≥ 0.95, surge protection 2.5 kV, colour temperature 5700 K, CRI > 80, intergral drivers, prewired and connecting with 3 Core, 1 sq mm sheathed copper flexible cable, including lamps complete all as specified and directed. MAKE:- Cat No. VENUSNEOHE2X2PLR18-42WLED830 MOD of Havells or techno-commercially equivlent model in Philips / WIPRO / Syska / Crompton Greaves.

Sub main wiring with two runs of single core 6 sq mm, PVC insulated, PVC unsheathed, FRLS copper conductor cable drawn in and including PVC concealed / surface, conduit of suitable size, with one run of 6 sq mm copper conductor cable as earth wire, including cutting chases to wall and making good the disturbed surfaces for insertion of PVC conduit, complete all as specified and directed complete all as specified and directed. NOTE:- 2 runs of 6 sq mm cable, 1 run of 6 sq mm cable and one run of PVC conduit shall be measured as one unit.

Taking down carefully existing CFL/FTL light fittings complete from wall or celing making required changes in internal wiring and fittings for converion to LED light fitting, reassembling & refixing the light fittings in the same location after replacing LED tube rods, complete all as directed. Note : Supply only tube rods will be measured and paird for separately under respective item.

Supply only LED tube rod, 4 feet long, 18 W, 240V, 50 HZ suitable for fixing to T-8 FTL fitting (converted under Sl Item No 93 here-in-above) as per Cat Part No ; CRYSTAL 1213T8DSTL18WLED865SGLASS of HAVELLS or Equivalent complete all specified and as directed .

Taking down existing conventional FTL / CFL light fittings of any type and capacity complete all as specified and as directed.

Taking down existing conventional lamp of 9W, Supply and fix, new LED Lamp 9 W threaded / pin type including making necessary alterations if required for working of light fitting complete all specified and as directed .

Taking down existing HPSV/MV, FTL or CFL street light fitting, Supply and fix outdoor type LED street light fitting of 30 Watts comprising of epoxy powder coated housing, enclosed with glass cover in frame with protection IP-66 complete with all accessories and light colour white and fixing complete all as specified and directed including Cat Part No :ENDURACITYLITEPLATPLUSSL30WLED757SASYBOPC of make Havells or eqivalent as specified.

Taking down existing HPSV/MV, FTL or CFL street light fitting, Supply and fix outdoor type LED street light fitting of 45 Watts comprising of epoxy powder coated housing, enclosed with glass cover in frame with protection IP-66 complete with all accessories and light colour white and fixing complete all as specified and directed including taking down the existing old HPSV/MV, FTL or CFL light fitting, Cat Part No ENDURACITYLINERNEX GENSL45WLED757SASYBOPC of make Havells or eqivalent as specified.

Supply & fix FRP loop in loop out boxes of size not less than 350 mm x 250 mm x 150mm out door type duly fitted on bottom of steel tubular poles with suitable size clamps, bolts, nuts and washers complete with 4 connectors heavy duty and clamps made out of mild steel flat iron 32 x 6mm and GI nuts, bolts etc including taking out the exisitng unserviceable loop boxes complete all as specifed and as directed.

Supply & fix PVC insulated 1100 volts Aluminium conductor for working voltage upto and including 1100 volts of size Weather proof single flat twin core cable 2.5 Sqmm from loop in box to fitting including taking down unserviceable / defective cable all as specified and as directed.

Supply & fix, in repairs, PVC rigid conduit of size 20 mm dia medium grade wilh all accessories and with suitable clamps for fixing on poles /walls etc all as specified and as directed.

Demolishing old earthing pit, and providing new earthing pit with Galvanized Iron earth plate electrode 600 mm x 600 mm x 6.3 mm buried directly in ground vertically in pit of depth not less than 2.25 metre below normal ground level with top edge of the earth plate at a depth not less than 1.5 metre below normal ground level surrounded from all sides with mixture of charcoal and common salt in alternate layers and electrode connected to GI earth wire of 4 mm dia by means of bolts, nuts, check nuts and washers, earth wire protected by galvanized steel pipe 15 mm bore (light grade) connected to earthing test point all as shown in electrical plate No. 3 of SSR-2009 Part I and including necessary excavation and earth work in any type of soil, 40 mm bore light grade GI pipe for watering funnel wire mesh, PCC chamber in cement concrete (1:3:6), type C1 , manhole cover with RCC (1:2:4), type B-1, reinforced with 6 mm dia MS round bars @ 15 cm c/c both ways for cover and MS frame etc., complete all as specified and as directed NOTES :- (i) The quoted rate deemed to include earth wire and protection pipe up to 7.5 metre from earth plate / earth point/test point. (ii) Earth pit shall be constructed at least 0.5 metre away from each earth chamber.

Vasavi Electricals

Meghana and Gowda Enterprises

Ashraya Nirman