CONSTRUCTION OF BUS SHELTER AT PIRITHIVIMANGALAM PANCHAYAT NEAR NH

Amount

CONSTRUCTION OF BUS SHELTER AT PIRITHIVIMANGALAM PANCHAYAT NEAR NH

Earth work excavation for foundation in all classes of soils and sub soil to full depth except in hard rock requiring blasting but inclusive of shoring strutting if required for the sides of foundation.

Supplying and filling in foundation and basement with good sand in layers not more 15 cm thick including ramming, watering and compacting etc.complete complying to standard specification

Collection and supply of gritty gravel from appd quarry including cost and conveyance of all materials to site including all labour charges for filling etc.complete,

Refilling with excavated earth in basement in layers not more 30 cm thick including ramming, watering and compacting etc.complete complying to standard specification

Cement Concrete 1:4:8 mix using 40 mm HBG metal for foundaion including watering wherever necessary and laid in layers of not more than 15cm thick. Compacting etc., complete complying with standard specifications and as directed by the departmental officers etc, complete.

Brick work in CM 1:5 mix using country bricks ground moulded of size 23 x 11 x 7 Cm for the following including curing etc., complete complying with standard specifications.

Supplying and Fabricating and placing in position MS Steel or ribbed for steel for all reinforced cement concrete works as per the design given including cost of steel and blinding wire all floors etc., complete complying with standard specification.

Supplying and Erection centering for sides and soffiots including necessaary supports and strutting as directed by the departmental officers Lintels, Staircase waist slabs, Landing slabs, Landing beam, Portico beam etc.)

Column

For Roof Slab

Rainforcement Cement Concrete 1:1.1/5:3 using 20 mm ISS HBG metal for all RCC item of works excluding cost of reinforcement and fabricating charges, centering and shuttering but icluding curing and providing fixtures like fan clamps in the RCC floor or roof slabs wherever necessary and bearing surfaces of walls, sides and bottom of the slabs, beams, etc., shall be finished smooth with cement mortar 1:3, 12mm thick and with kraft paper without claiming extra as directed by the departmental officers complete complying with standard specifications.

Paving the floor with best approved quality fine polished Granite Stone Slabs of size 1200 x 600 of 18 / 20mm thick of Synthetic Grey, Paradise and similar varieties with machine cut edges laid over a cement mortar bed of 20mm thick using cement mortar 1:3 (One cement and three crushed stone M.Sand) fixing the slabs with required cement slurry and laid in true right angles with minimum possible width of joints and pointing the joints with white cement mixed with mathcing colouring pigments etc.

ing the floor with pre-polished concrete anti-skid tiles (Required shape and design) of 20mm thick of approved quality and colour laid in Cement Mortar 1:3 (One Cement and Three crushed stone M.Sand) 20mm thick and pointed with white cement mixed with colouring pigment at the rate of 0.40 Kg. / sq.m., curing, etc., complete

Dadooing walls with following best approved quality, white / colour glazed tiles of following sizes set in Cement Mortar 1:2 (One Cement and Two crushed stone M.Sand) 10mm thick and pointing the joints with white cement mixed with colouring pigments at the rate of 0.40 Kg. / sq.m. neatly in all floors, curing, etc., complying with standard specification and as directed by the departmental officers.( Dadooing with printed design colour glazed tiles of size 300 x 450 x 8mm)

Supplying and fixing colour galvalume sheet roof of 0.47mm thickand steel tubular box section of 100x50x3mm of 1meter interval including priming coat fixing in position with all necessary accessories complete complying with standard specification and as directed by the departmental officers.

Plastering with CM 1:5, 12mm thick over the cement concrete for floor finish including curing etc., complete complying with standard specifications and as directed by the departmental officers.

Supplying and painting the walls with two coats of wall putty as instructed by the departmental officers including preparation of surface curing, etc., complete

Towards cost and supply and fixing of SS Grill Work.

Towards cost and supply and fixing of SS Hand Rail

Towards cost and supply of I Section (10x20x7mm thick)

Towards cost and supply of 12 mm Thick Base Plate

Towards cost and supply of 75 x75 x2 mm Tubular Section

Towards cost and supply of 80 x40 x 1.6 mm Tubular Section

Towards cost and supply of 50 x25 x 2 mm Tubular Section

Towards cost and supply of 120 x65 x 2 mm Tubular Section

Towards cost and supply of 18 x36 mm Bolts& nets

Painting two coats with exterior emulsion including cost and all other charges etc.,

Supplying and painting two coats new iron work such as steel doors ventilators, window bars etc., (WITHOUT PRIMER)

Providing and fixing of Aluminium Composite Panel (ACP) 4 sided having 50 x 25 x 1.50mm frame work vertical and horizontals out of specially designed extruded sections withstand wind pressure of 180 Kg/sq.m and fabricated fixed at all level elevation and heights. The extruded section cutting and fixing required space extruded section shall be of 6063 and alloy of BSH 9 confirming T is – 63400 rate shall included to fix the main frame with necessary clamps, fasteners, bolt nuts etc. The main frame of extruded section shall be of 22843 & 22739 (H9) grade conforming to BS 4174 (or) IS 8147. Rate shall included 4mm thick ACP sheet (0.25 + 3.5 + 0.25) fixing with spacer tape and the ACP sheet bounded with special type structural sealant of dow corning 789 or equivalent in dust free conditions the gaps between ACP sheet to be filed with whether sealant and backer rod or 12mm foam sheet to ensure water and air tightness in all complete complying with standard specification as directed by the departmental officer (M-0658) (page 103)

Towards cost and supply and Fixing of Aluminium Grill Work

Towards cost and supply of Sitting Chair

Wiring with 2X2.50 sq.m PVC unshenthed SC alu. Cable with 650V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories and with T.W switch box with pointing of suitable colour with continuous earth wire connection of 14 SWG TC wire for concealed PVC light point (SD 21)

Wiring with 2X2.5 sq.m PVC unshenthed SC alu. Cable of 650 V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories of 150x 100x 63m size T.W switch for 15A pin non interlocking plug including pin top with painting suitable colour with continuous earth wire connection of 14 SWG TC wire for concealed PVC Plug point (SD 37)

Supply and fixing of 4 x 40 Volt Flu Fitting (SD 89)

Supply and fixing of WT bulk head fitting with guard suitable for incandesces lamb guard and 60W bulb (SD 83)

Supply and fixing of Sport Light

Supply & fixing of 1200mm (48) sweep AC ceiling fan complete with regulator with 1m down rod on the existing clamp. (SD 107)

Supply and run of 2 of 6 sq. mm ( 84/0.30) polythene insulated and PVC unsheathed S.C. Alu cable of 1100 V on 7/20 Gi bearer wire for Service Connection Main - SD.59

Supply and run of 2 x1.5sq. Mm(22/.3) PVC insulated SC unsheathed CU. Conductor of 1100Grade in 25mm Dia GI PIPE (Glass"B")suitably Bent at both ends with necessary angle iron upright and end supports for Mains SD 69

Supply and fixing of 25 Amps DP Switch of 500V with metal clad with fuse and neutral (Side Handle) on suitable (SD143)

EB Service connection Charges

Providing Name board with Titanium brass lettering

Towards photographic charges Etc complete

GST Amount for providing Service to Government Contract Works for the above Construction Works. { GST Amount is the Total GST Amount for total overall quoted amount above this row in column "BB" for all works in this package}

saiconstruction (BID ID -1550319)