REPAIRS TO FLOORING AND KITCHEN OF TYPEI II AND III MD ACCN AND REPAIRS TO JOINERY FALSE CEILING ROLLING SHUTTER AND ALLIED WORKS TO CERTAIN BLDGS AT DGQA ORG AT AUNDH UNDER GE MH AND RH KHADKI

Amount

Taking up or down 15 mm bore steel tubing and connections, including cleaning for re-fixing or removal to store.

Taking up or down 20 mm bore steel tubing and connections, including cleaning for re-fixing or removal to store.

S & F 15 mm bore tubes, medium grade, galvanised, with all fitting & fixed complete to walls & ceiling or laid in floors.

Fixing only tubes of 15 mm bore, any grade, to walls and ceiling or laying in floors.

S & F 20 mm bore tubes, medium grade, galvanised, with all fitting & fixed complete to walls & ceiling or laid in floors.

Fixing only tubes of 20 mm bore, any grade, to walls and ceiling or laying in floors.

Cutting chases, pinning in brick walls, making good to facing where required and pointing in cement mortar (1:3) and making good , cutting n.exc 10cm girth , all as specified

Dismantling water tanks of capacity exc 250 litres but n exc 500 litres and removing to store all as specified

Dismantling water tanks of capacity exc 500 litres but n exc 1000 litres and removing to store all as specified

Dismantling water tanks of capacity exc 1000 litres but n exc 2000 litres and removing to store all as specified

S & F rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) of capacity 500 litre hoisted and fixed in position as specied and directed.

S & F rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) of capacity 1000 litre hoisted and fixed in position as specied an directed.

S & F rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) of capacity 2000 litre hoisted and fixed in position as specied an directed.

S & F in repair PVC valveless syphonic action type flushing cistern (Low or high level) of 10 litre capacity, white/coloured with inlet ball valve, float, handle including fixing brackets and 32 mm bore PVC flush pipe etc complete all as specified and directed.

S & F in repair ball valves suitable for 20 mm bore iron pipe high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball, screwed for iron pipe and fixed, (minimum weight 210 gms) all as specified and directed.

S & F in repair ball valves suitable for 15 mm bore iron pipe high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball, screwed for iron pipe and fixed, (minimum weight 455 gms) all as specified and directed.

S&F in repairs stop valves, 15 mm cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions all as specified and directed.

S & F in repairs PVC connection of 450 mm length, suitable for 15 mm bore pipe with PTMT nuts all as specified and directed.

S & F in repairs PVC connection of 600 mm length, suitable for 15 mm bore pipe with PTMT nuts all as specified and directed.

S&F in repairs PVC waste outlet pipe for 32/40mm dia WHB complete all as specified and directed.

S&F in repairs PVC waste outlet pipe for kitchen sink complete all as specified and directed.

Cleaning the surface with wire brush, detecting sources of leakages and removing/taking down unsound treatment/surface and M&L for carrying out non-destructive waterproofing treatment to sunken portion of slab, floor and walls of bath, WC, WHB and floor traps (combined unit) by using construction chemical method as hydrophobic PU grouting, etc, with first course of injection MDI based PU foam and second course of injection PU plain all as per manufacturers instruction, etc, complete and as directed. The PU foam shall have 100% solids and solvent free, and shall expand 30-40 times its volume at liquid stage in presence of water, the PU plain injection shall have minimum 100 CPS viscosity and shore hardness minimum 50. Make: PIDILITE or equivalent

Making hole and M&L for fixing thr metallic packer for hydrophobic PU foam and Sealer as per manufacturers specification. The PU foam shall have 100% solids and solvent free, and shall expand 30-40 times its volume at liquid stage in presence of water, the PU plain injection shall have minimum 100 CPS viscosity and shore hardness minimum 50. Make: PIDILITE or equivalent

M&L for the tile joint chemical cleaning and re-grouting carefully by washing the existing tille with heavy duty tile cleaner preferbly of M/S Pidilite or equivalent cleaner, again washing with fresh jet water, scratching the joints and filling the same with (white/matching colour) epoxy tile grout of M/s Pidilite, ROFF RTM epoxy or equivalent, or equivalent , curing , cleaning the surface etc, complete all as directed by Engr-in-Charge and as per the sample done at ground level.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises all as specified

M&L Coloured Non Skid ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over 15 mm thick screed in CM 1:6 all as specified.

M&L Coloured Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 300X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over 10 mm thick plastering in cm 1:4 all as specified.

M&L coloured Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over 15 mm thick screed in CM 1:6 all as specified.

S & F Vitrified ceramic coloured tiles 10mm thick (square/rectangular) area of each tile not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed or bedding in layer in cement mortar 1 :6 , set and jointed in neat cement lsurry and pointed in white or coloured cement to mathch the surfaces of tiles.

S&F in repairs Wash basins, vitreous China (flat back or angle back type) any size, including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing and supply of waste pipe all as specified

S&F in repairs 15 mm dia Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed all as specified.

S&F in repairs Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed

S&F in repairs 15mm dia bore fency type Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed

S&F in repairs CP two way bib taps screwed for iron pipe and fixed necessary fitting with and incl PVC connection all as specified and directed

Taking down drain pipes (any size or pattern), including all fittings, T, bends,etc., including cleaning or refixing (measured overall as fixed along the centre line over fitting and accessories)

S&F PVC (SWR) pipes 110 mm dia single sockets, in any length rubber ring joints, laid in trenches or in floor all as specified and directed.

S&F PVC (SWR) 110mm dia bends any radius all as specified and directed.

S&F PVC (SWR) branch 110mm bore piecs, single ( single Y ) equal or unequal all as specified and directed.

S&F PVC (SWR) pipes 75 mm dia single sockets , in any length rubber ring joints, laid in trenches or in floor all as specified and directed.

S&F PVC (SWR) 75 mm dia bends any radius all as specified and directed.

S&F PVC (SWR) branch 75 mm bore piecs, single ( single Y ) equal or unequal all as specified and directed.

S&F in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and waste; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm all as specified and directed.

S&F in repairs vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe)

S & F in repairs wash down water closet ( European type) excluding fixing bolts, flushing cistern, & flush pipe but including connecting to existing out let pipe etc all as specified and directed.

S & F in repairs Plastic seat cover to EWC with aluminium hinging device all as specified and directed.

S & F in repairs PVC (SWR) 75mm outer dia multi floor trap with grating including jointing with solvent cement all as specified and directed.

S& F in repairs Soap dish vitirous china fixed to plugs with chromium plated brass screws complete all specified and directed.

S&F in repairs sheet glass shelf assembly consisting of 5.5 mm thick sheet glass 12 cm wide with CP bracket guard and railing 60 cm long all as specified and directed.(Make : Jaguar, Cat Part No CAN -1173)

S&F in repair PVC water tank cover with fitting suitable for tank of capacity of 500 liters etc including device complete.

S&F in repair PVC water tank cover with fitting suitable for tank of capacity of 500 to 1000 liters etc including device complete.

S&F in repair tubular towel rail 20mm dia, D type 60cm long between flanges brass chromium plated, all as specified and directed.

S&F in repairs Chromium plated shower roses with or without swivel joints, any size, including fixing to steel pipe or union all as specified.

Demolition stone slabs and tiles of any description or thickness in floors aprons laid and bedded and jointed in cement mortar.

M&L for Granite slab 20 mm thick machine cut bedded and jointed with grey cement and pointed and adhesive of pigment to match the shade incl cutting and polshing as directed by Engr-in-Charge.

M&L for 20-25mm thk machine cut cuddappah stone slab flooring over cement screed bed laid and jointed with grey cment slurry mixed with pigment to match the shade of the slab incl grinding polishing complete all as specified.

M&L machine cut kota stone slab flooring 20-25mm thick in flooring but one piece as in treads of straircase etc over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete, over 15 mm thick screed bed or bedding in CM 1:6 for laying floor finishes, all as specified and directed.

All as per item No 57 here in before but in one piece on vertical surface as skirting over and incl 10 mm thick rendering in CM 1:3 to receive kota stone/slab etc all as specified and directed.

Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations

S&F in repair plate rack made of stainless steel 1mm thick kitchen including fixing overall size 915mm x 915mm x 255 mm all as specified.

Taking down cement or cement lime plaster from brick walls etc including raking out joints, hacking for key scrubbing down with water etc, all as specified and directed.

M & L for rendering 10mm thick on fair faces of brick work or concrete surface in cement mortar 1:6 all as specified and directed.

M&L rendering 10 mm thick in cement mortar 1:4 om fair faces of concrete surfaces of ceiling finishing even and smooth without using extra cement all as specified and directed.

M & L applying two coat of oil bound distemper over a coat of primer to newly plastered surface including preparation of new plastered surfaces to wall all as specified and directed.

M & L applying three coats of white wash to newly plastered surface of ceiling including preparation.

Dismantiling of wall and ceiling boards (fibre, pulp, insulation , etc) or insulation boards/slab / blanket , any thickness , including cover fillets all as specified and directed

Cutting holes in brick walls in cement mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 type B-1 as required , depth of embedded portion of holdfast exc half bricks and not exc one brick all as specified and directed

M & L for cement concrete 1:2:4 type B using 20mm graded aggregate for filling in holdfast all as directed.

Taking down chowkat without taking off shutter from frame n.exc 1.5 sqm each all as specified and directed.

Taking down chowkat without taking off shutter from frame exc 1.5 and n.exc 4 Sqm each all as specified and directed

Taking down shutters of any description exceeding 1.00 Sqm and n.exc 2.00 Sqm each all as specified and directed.

S &F Pressed steel frame for doors of size 125x 60mm with one or more rebates including necessary fixing lugs , hinges , lock strike plate etc complete all as specified and directed .

S&F pressed steel frame of size 105x60mm made out of 1.25mm steel sheet for doors with one or more rebates including necessary fixing lugs , hinges , lock strike plate etc complete all as specified and directed

M&L PCC 1:3:6 type C-0 using 12.50mm graded stone aggregate as in filling of pressed steel chowkat all as specified and directed

S&F 30mm thck flush shutters, solid core construction with block board core and plywood face panels , commercial type on both sides all as specified and directed.

S&F 35mm thick(2nd Class hardwood) factory made gauzed and skeletondoor shutters, open rebated and prepared to receive glass, gauze , etc (without sash bars) , edge of framing plain, chamfered or rounded, fitted with cut and mitred beds for securing glass , etc, sizes of members of shutters as specified in SSR Part I , Section 8 , Clause 8.20 (a) , Supplied and fitted to chowkats all as specified and directed

S&F 25mm thick(2nd Class hardwood) factory made gauzed and skeleton window shutters, open rebated and prepared to receive glass, gauze , etc (without sash bars) , edge of framing plain, chamfered or rounded, fitted with cut and mitred beds for securing glass , etc, sizes of members of shutters as specified in SSR Part I , Section 8 , Clause 8.20 (a) , Supplied and fitted to chowkats all as specified and directed

S & F 35mm thick factory made second class hard wood plain, framed , panelled shutter (2 panel) with lock rail and panel commercial ply or 12 mm veneered particle board of 9 mm B.W.P commercial veneering on both faces.The size of rail and stile as per IS:1003 (part-I), kiln seasoned and chemically pressure treated all as specified and directed.

S&F in repairs 19mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination , fixed with screws to timber frame work as in shelves all as specified and directed.

S & F Continuous ( Piano) Hinges mild steel bright finish or electrogalvanised all as specified and directed.

S&F Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded all as specified and directed.

S&F Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete without glazing bars, dovetailed or welded all as specified and directed.

S&F powder coated Anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, supplying & fixing in opening as per specification & drawing all as specified and directed.

S&F factory made PVC solid panel door shutter 30mm thick (style) connecting of frame made out of MS tube for top and bottom rail. MS frame shall be coverd withheat moulded plain coour PVC 'C' channel having a PVC sheet strips of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail of either side and as gap insert for toprail and bottom rail panellinn of plain colour PVC to be fitted in the ms frame welded/ sealed in the stiles and rail with suitable PVC sheet and loading and jointed together with solvent cement, supplying and fixing in the frame at site all as directed.

S&F Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or Fe 310-0

M&L for Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, win dow-cills, cooking plat forms and like in cement mortar (1:4) including point ing in white cement (1:2) us ing marble dust with admix ture of pigment to match with shade of granite laid over 15 mm thick screed in CM 1:6 as directed by Engr-in-Charge

Dismantling steel rolling shutter including assembly exceeding 4 Sqm but not exceeding 12 Sqm and repair for proper functioning by replacing rolling assembly and re-erecting the shutter, including straightening, cutting and welding of shutter angles, channels providing proper guides as required and making good, functioning by applying greasing , oiling for smooth and easy movement of the shutter and applying two coats of synthetic enamel paint of matching colour/shade, complete all as specified and directed.

S & F in repir Collapsible steel gates, top hung, consisting of channel pickets, pivoted flat bars, top and bottom runners, brass handles exceeding 4 Sqm but not exceeding 12 Sqm and repair for proper functioning by replacing rolling assembly and re-erecting the shutter, including straightening, cutting and welding of shutter angles, channels providing proper guides as required and making good, functioning by applying greasing , oiling for smooth and easy movement of the gate and applying two coats of synthetic enamel paint of matching colour/shade, erected in position and securing runners with holdfasts and brackets, complete all as specified and directed.

S&F aluminium powder coated window sliding type (3 track) with frame size 100 x 35 x 1.20mm and shutter 39.40x17.70x1.20mm with two glass shutter and one stainless steel wire mesh shutter including necessary jointing cleats, glazing clips, rubber packing powder coated aluminium snap beading screws with 4mm plain float glass and 0.56mm dia SS wire mesh, fittings etc, and necessary locking arrangements and including making good the jambs and painting with matching type and shade including taking down any type of window complete all as directed

S&F powder coated aluminium frame for doors, windows and ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and directed

S&F powder coated Anodised aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified

Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge

M&L 12mm thick Prelaminated particle board, interior grade, prelaminated both side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work , aluminium works etc all as specified.

S&F in repair locking arrangements of CP brass for aluminium doors i.e , by placing new lock 4 lever, vertcal type of 65mm , with triplicate key etc complete all as specified and directed.

S&F in repair galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperature 1.18mm , all as specified and directed.

S&F galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperature 1.18mm , all as specified and directed.

S & F 125 mm size extruded aluminium alloy handles, fabricated type anodised all as directed.

S & F in repairs125 mm size extruded aluminium alloy handles,fabricated type anodised.

S & F aluminium anodised, barrel tower bolts of extruded section and fixed, length of bolt 125mm all as directed.

S & F aluminium alloy , anodised , sliding door bolt with hasp , staple (bolt type) & fixing clips of sheet, cast or extruded section & fixing bolts & sliding bolts of extruded section or cast aluminium alloy & fixed length of bolt 200 mm all as directed.

S & F in repairs aluminium alloy , anodised , sliding door bolt with hasp , staple ( bolt type ) & fixing clips of sheet, cast or extruded section & fixing bolts & sliding bolts of extruded section or cast aluminium alloy & fixed - length of bolt 200 mm

S & F in repair of aluminium anodised, barrel tower bolts of extruded section and fixed, length of bolt 100mm all as directed.

S & F in repair of aluminium anodised, barrel tower bolts of extruded section and fixed, length of bolt 125mm all as directed.

S&F 100 mm mild steel butt hinges medium weight, cold rolled all as directed.

M&L for spot welding for repairing steel windows and ventilators hinges, brackets, steel handles etc all as specified and directed.

S & F in repairs powder coated aluminium brakets for curtain rods all as specified and directed.

S&F in repairs 20mm Harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc all as specified and directed

S&F in repairs drawer handles , mild steel , flush drop (65 to 75mmm grip) on 4 screw plate , including lettin in all as specified and directed.

S&F in repairs Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed

S&F in repairs aluminium extruded section body Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 36 to 61 kg and fixed all as specified and directed.

S&F in repairs 140mm rubber door stopper of aluminium alloy body, anodised all as specified and directed.

S&F in repairs vertical type venitian blinds with sliding & revolving track & 100mm wide approved coloured fabric etc complete as directed by Engr-in-charge

M&L for 10mm thick PVC insulated panels 600x600mm with EPS stuck to 1mm printed PVC sheet suitable placed in and including flase ceiling grid made Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre. Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified

M&L for false ceiling of plain gypsum board 12mm thick and frame made out of MSGI BPS grade , angle 24mm x24mmx0.43mm, 'T' section 24mm x 25mm x 0.30mm and main runner 'T' section 24mmx38mmx0.35mm complete with angle fixed to wall with rawl plug 100mm long of maximum 600mm c/c , hanging with 2.50/3.00 mm dia GI wire suspenders fixed to ceiling with 80mm long rawl plug providing 1 No per Sqm complete with painting two coats of oil bound distemper over one coat of primer and preparation of surface complete all as specified and directed by the Engr-in-charge.

S&F POP decorative cornice 100mm size of approved design and pattern fixing along wall and ceiling juction all as specified.

Supply only 3mm thick sheet glass ordinary quality and glazing with oil putty/wooden beading in square not exceeding 0.5 Sqm in each pane all as specified and directed .

Taking down existing kitchen cabinet of any descreption from kitchen and removal to store

S&F 18mm plywood BWR grade with 2mm thick lamination of approved colour in one side and white/ off white in other side (hand pressed) as in cabinet all as directed by Engineer-in-Charge

All as per item No 119 but machine pressed

S&F plain glass 5.00mm thick as in cabinet with necessary fixing arrangement including granding & moulding all as directed by Engg-in-Charge

All as per item No 121 but 8.00mm thick

S&F stainless steel shutter frame with profile 18 gauge all as specified and directed by Engr-in-Charge

S&F stainless steel button/ bracket 12mm X 5mm for glass shelves

S&F stainless steel kitchen cabinet basket using 20mm square pipe in frame, 15mm round as in folding pipe, 5.00mm & 3.00 mm in balance portion as dircted by Engr-in-Charge

S&F 22" long trolley channel all as directed by Ebgr-in-Charge Make:- Godrej/ haffle

S&F stainless steel cabinet door closer auto hinges of size not less than 115mm X 65mm soft close. Make:- Hettich/ Godrej/ Haffle

S&F stainless steel slim concealed handle 100mm all as directed

All as per item No 128 but 150mm all as specified and directed by Engr-in-Charge

S&F MS trolley wheel 25mm dia all as specified and directed by Engr-in-Charge

Hacking out old broken glass, (any thickness, size , qulaity or description) metal frame including punching or drilling out old glazing pins/spring clips all specified and directed

Supply only Figured glass, pinhead type 4mm thick glazing with oil putty in squares n exc 0.5 sq. m each pane all as specified and directed

S& F 3 mm thick sheet glass ordinary quality and glazing with oil putty/ wooden beading in square n.exc. 0.5 sqm in each pane

M&L painting to wooden surfaces of any description over 10 cm width or girth incld prepration of new surface and applying two coat of synthetic enamel paint over one coat of pink primer all as specified

M&L for Preparation of new steel surfaces over 10cm in width or girth and applying two coats of synthetic enamel paint of approved colour over a coat of red oxide primer complete all as specified.

Sunrise Traders (BID ID -3088440)

S.R.M.K Enterprises (BID ID -3088745)

V.R.PRAJAPATI AND CO. (BID ID -3095002)

M/S JAYCONSTRUCTION CO (BID ID -3095701)

L.K.R.TIWARI CONSTRUCTION (BID ID -3094960)

shree ram enterprises (BID ID -3094934)