Repair/Renovation of Building No. 143 (Junior club), Building No. 14 (Senior club), Building No. 397 (Community hall), Building No. 242 (Sports pavilion), Amber Udyan, Sarath garden and Jubilee park at Ordnance Estate, Ambarnath

Amount

Repair/Renovation of Building No. 143 (Junior club), Building No. 14 (Senior club), Building No. 397 (Community hall), Amber udyan, Sarath garden, & Jubilee park and Building No. 242 (Sports pavilion), at Ordnance, Estate, Ambarnath

Dismantling of Single layer Mangalore pattern or similar tiles in roofing

Dismantling of Single layer Mangalore pattern or similar tiles embedded in lime or cement mortar

Dismantling of Battens for tiles, shingles etc, of any size including tilting fillets, spaced exc 15cm.

Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings

Dismantling in fillets, rails, posts, rafters,purlins, etc. under 40 sq. cm in section Unframed work

Dismantling boarding, any description, fixed in any position with nails

M & L for 2nd class hard wood in scantling ,timber fixed with clean sawn wood.

M&L 0.63 mm thick Galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with coach screws and washers, in roofs, walls etc. with grade of zinc coating 275

S & F Plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 , 1.00mm thick

S&F IInd Class hard wood clean sawn, battens at 30 cm centre to centre, cross sectional area exc. 5 sqcm and n.exc. 15 sqcm

S&F Mangalore or similar roofing tiles, interlocking at side joints, laid dry.

Re-fixing Only Mangalore or similar roofing tiles, interlocking at side joints.

S&F Ridge tiles or hip tiles to suit mangalore pattern roofing tiles, bedded and jointed in cement mortar 1:6.

Filleting any position and to any shape in cement mortar 1:4 including all mitres, stops, etc.(Exc. 25 but n exc. 50 sq. cm), in repairs

S&F Boarding, with nails in any situation (except flooring and skirting) Planed one side with butt joints 20 mm thick 2nd class Softwood

Painting on Tiles or slate battens, any size and spacing, prepared and treated all over (measured overall on one side only, spaces not deducted) with creosote.

M&L preparation of new or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10cm width or girth and applying two coat of synthetic enamel ordinary tint, over a coat of pink primer

Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets

S&F Gl frame work for seamless ceiling/wall comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre.

S&F PVC insulation panels with EPS stuck to 1mm printed PVC sheet suitably placed in false ceiling grid made of Aluminium/G.I./M.S. as per specification , 10mm Thickness of PVC insulation panel

M&L Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified

Providing and fixing 10mm thick plaster of paris ceiling (Gypsum anhydrous) to flat surface over 2nd class soft wood fillets, or metal frame work and reinforced with G.I. wire mesh (Fillets, metal frame work and G.I. wire mesh paid separately)

Providing and fixing Gypsum Board 12mm thick in walling fixed with screw as per manufacturers instructions

S&F Veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on both faces; fixed with screws to timber/aluminium frame work, 12mm thickness

Fixing only Veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on both faces; fixed with screws to timber/aluminium frame work, 12mm thickness

French polishing on surfaces of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on old works with two or more coats

M&L preparing new plastered or unplastered surfaces Chalk whiting, on plastered surfaces, preparatory to distempering and distempering ceiling with oil emulsion two coat

M&L preparing new plastered or unplastered surfaces Chalk whiting, on plastered surfaces, preparatory to distempering and distempering walls with distemper oil emulsion two coat

M&L preparing old plastered or unplastered surfaces , preparatory to distempering and distempering walls with distemper oil emulsion two coat

M&L preparing old plastered or unplastered surfaces, preparatory to distempering and distempering ceiling with oil emulsion two coat

Taking down Chowkhats or frames exc 1.5 sq. m but n exc 4 sq. m each with shutters (without taking off shutters from the frame)

S&F anodised aluminium frame for doors,windows,ventilators etc. with one or more rebates including joining cleats for fixing with powder coating

S&F Anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading

S&F Sheet glass 5.5 mm thick, ordinary quality and glazing with oil putty in square but exc 0.5 sq. m in each pane

M&L Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed

S&F brass Mortice lock, vertical type, size 100 mm, 2 lever

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), and rubbish off the premises

M&L Screed bed or bedding layer of cement mortar 1:6, 20 mm thick for laying floor finishes

M&L light shade Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match

M&L Rendering/Plastering 15 mm thick on wall fair faces of brick work or concrete surfaces, C:M 1:6

M&L Glazed ceramic coloured tiles in vertical surface area of each tile exceeding 0.06 sq.m but not exceeding 0.16 sq.m, 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match

Taking up or down steel tubing and connections, including cleaning for refixing or removal to store, bore of pipe in 15mm.

M&L for 15mm bore `Medium grade` GI tubing with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed by the Engineer-in-Charge

M&L Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth

S&F Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe Wash down water closet (Pedestal pattern), complete , in repairs

S&F vitreous China squatting pan, `Orissa` pattern, size 580 x 440 mm white, with integral foot rests quatting pan including connection to trap,and to flushing pipe, anti-syphonage pipe, complete including making good to floor including trap set in and including concrete complete all as specified.

Vitreous China urinals, half stall type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe), in repairs

S&F of Vitreous China wash basin, white, flat back, size 550x400mm Wash basins, Vitreous China (flat back or angle back type) any size, including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe. in repairs

S&F 15mm fancy type Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed, chromium plated

S & F fancy Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts,screwed for iron pipe and fixed, in repairs

S & F of Waste coupling of PTMT (half or full threaded)(Minimum weight 32mm-45 gms/40mm-60 gms) Bore dia of discharge pipe 32mm,

S & F of Waste coupling of PTMT (half or full threaded) but suitable for urinals, (Minimum weight 32mm-45gms Bore dia of discharge pipe 32mm,

S&F in repairs, 10 ltrs capacity PVC Valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets, 32mm dia flush pipe of polyethylene of low or high density or PVC, for low level cistern and connections to pipes and fixing of chain and pull, or lever, if any

S&F of PVC connections 15mm size with PTMT nuts of length 450mm

S&F of Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed of bore 15mm

M&L for PVC (SWR) floor trap, plain with grating including jointing with solvent cement, dia of outlet in 75mm

S&F Cast iron Nahani trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4), dia of outlet in 75mm

S&F Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, Ist class hardwood

S&F in frame at site Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, with particle board core

S&F butt hinges 100mm, heavy weight, cold rolled mild steel complete all as specified and as directed by the Engineer-in-Charge

S&F 150mm aluminium handles, cast type, anodised complete all as specified and as directed by the Engineer-in-Charge

S&F for 150mm long aluminium, anodized, barrel tower bolts of extruded section complete all as specified and as directed by the Engineer-in-Charge

Taking down Chowkhats or frames n exc 1.5 sq. m. each with shutters (without taking off shutters from the frame), removing to store

S&F Chimney bars (straight or camber); bearing bars; tongues or water bars for window frames; window guard bars, plain, let in and fixed independently in wooden frames, L or T section supports for shelves etc. and similar articles

M & L Wire brushing and cleaning top surface of tiles, lime terracing or cement concrete, including flashings and junction of parapets, etc

Applying evenly a coat of blown type bitumen at the rate of 1.50 kg per square metre and blinding with clean dry sand @ 0.05 cu. m. per sq. m

S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550mpa as in roof covering/cladding to wall,fixed with self tapping screw as specified

M&L Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing

S&F to chowkats Plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: 30 mm Thickness of shutter 1st class hardwood

S&F for 200mm long aluminium alloy, anodized sliding bolts with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminum alloys to door shutter complete all as specified and as directed by the Engineer-in-Charge.

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc.

M&L Rendering/plastering 10 mm thick on ceiling fair faces of brick work or concrete surfaces with neeru finish, CM 1:3

M&L Rendering/plastering 15 mm thick on wall fair faces of brick work or concrete surfaces with neeru finish, CM 1:6

Resecuring or easing & adjusting without taking down to door shutters of any description exc 1 sq. m but n exc 2 sq. m each

Resecuring or easing & adjusting without taking down to door shutters of any description n exc 1 sq. m each

Demolition of brickwork but built in cement mortar or cement lime mortar

M&L Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in, CM 1:6

M&L Brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in , CM 1:6

M&L Rendering/Plastering 15 mm thick on wall fair faces of brick work or concrete surfaces rendering is to be finished even and smooth (without using extra lime or cement), C:M 1:6

Providing, cement concrete in copings Type B1 1:2:4 (20 mm graded aggregate) copings

M&L for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces.

S&F Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. Rough finished surfaces of concrete, flat

M&L Broken glass coping on top of walls, 1:2 in lime mortar

M&L preparation of New painted steel & iron surfaces of any description, over 10cm in width or girth, not otherwise described and painting with sy. enamel paint Two coat, red oxide

Fabrication only Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out, Hard dense soil

Provision of Cement concrete in foundations,filling and mass concrete Type C2, 1:3:6 using 40mm aggregates.

M&L Walling of random rubble uncoursed, well bonded, bedded and solidly hearted, built in CM 1:6

M&L Raised pointing in CM 1:4 to random or polygonal rubble, uncoursed or brought upto courses random rubble masonry, uncoursed or brought upto courses

Dismantling fencing wire mesh, any type

Dismantling wrought iron or mild steel work of any description not otherwise provided for

Supplying only Chain link MS galvanised fencing, any size or type

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire

S & F posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc.and similar work.

S&F Stairs (framed) including stringers, treades, landing, balusters, hand rails etc. including cleats, brackets, etc. complete

M&L moorum/red bajari , spread, rolled and consolidated to gradient and camber required

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point

S&F hand shower (Health faucet) (ABS body) with 1 meter long easy flex tube in chrome finish & wall hook,

ARUN KUKREJA

KUGANCONSTRUCTIONS