Loading
Loading…
Loading…
Tender Value
₹79.1 L
EMD Value
₹1.6 L
Closing Date
15 Sept 2026, 11:00 am
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
+ Capital Works)
Above/Below/Par
GENL
15 conditions · 4 needing a document upload
The Bid Security shall be deposited either in cash through e-payment gateway or submitted as Bank Guarantee bond from a scheduled commercial bank of India or as mentioned in tender documents. The Bank Guarantee bond shall be as per Annexure VIA and shall be valid for a period of 90days beyond the bid validity period(For other details GCC april 2022 para 5 of part -I to be referred with amendment,if any)
The tenderer must have minimum average annual contractual turnover of V/N or V whichever is less, where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited (for details correction slip no. 01 vide L. No. 2022/CE-I/CT/GCC 2022/Policy dt. 4.07.2022 to be referred.) The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.(For details pl. refer GCC April 2022 with amendment, if any).
(a)The tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i)Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or (ii)Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or (iii)One similar work costing not less than the amount equal to 60% of advertised value of the tender.(For details pl. refer GCC April 2022 with amendment ,if any)
Similar Nature of works means-Electrification / Rewiring of Service or Residential building / Yard / HT / LT substation work / HT/ LT cable work / street lighting / platform or building lighting management / circulating area Lighting / Electrical overhead power supply work / Electrical pump work etc
19 conditions · 12 needing a document upload
FOR DOCUMENT TO BE SUBMITTED BY THE TENDERER FOR TENDER ALONG WITH THE OFFER. OFFERS WITHOUT THESE DOCUMENTS WILL BE SUMMARILY REJECTED as detailed given in checklist of tender booklet attached in document.
Following documents shall be submitted by the tenderer: (a) Sole Proprietorship firm : An undertaking on suitable stamp paper to this effect clearly mentioning PAN number.
Following documents shall be submitted by the tenderer:(b) HUF : (i)A copy of notarized affidavit on Stamp Paper declaring that he who is submitting the tender on behalf of HUF is in the position of 'Karta' of Hindu Undivided Family (HUF) and he has the authority, power and consent given by other members to act on behalf of HUF.
Following documents shall be submitted by the tenderer:(c) Partnership Firm :(i) A notarised copy of partnership Deed or Copy of Partnership deed registered with the Registrar. (ii) A notarized or registered copy Power of Attorney in favour of the individual to tender for the work, sign the agreement etc. and create liability against the firm. (iii) An undertaking by all partners of the partnership firm that they are not blacklisted or debarred by Railways or any other Ministry / department of the Govt. of India from participation in tenders / contracts as on the date of submission of bids, either in their individual capacity or in any firm/LPP in which they were/are partners/ members.
Following documents shall be submitted by the tenderer: (d) Company registered under Companies Act-2013 : (i) The copies of MOA (Memorandum of Association) / AOA (Articles of Association) of the company (ii) A copy of Certificate of Incorporation(iii)A copy of Authorization/Power of Attorney issued by the Company (backed by the resolution of Board of Directors) in favour of the individual to sign the tender on behalf of the company and create liability against the company.
Following documents shall be submitted by the tenderer:(e) LLP (Limited Liability Partnership ) registered under LLP Act 2008: (i)A copy of LLP Agreement (ii)A copy of Certificate of Incorporation (iii)A copy of Power of Attorney/Authorization issued by the LLP in favour of the individual to sign the tender on behalf of the LLP and create liability against the LLP. (iv)An undertaking by all partners of the LLP that they are not blacklisted or debarred by Railways or any other Ministry / Department of the Govt. of India from participation in tenders / contracts as on the date of submission of bids, either in their individual capacity or in any firm/LLP or JV in which they were / are partners/members.
Tenderer should submit copy of PAN Card along with their tender.
The Tenderer shall submit copy of Goods and Services tax (GST) Registration Certificate containing GST Registration Number.
Following documents shall be submitted by the tenderer: (g) Registered Society & Registered Trust: (i)A copy of the Certificate of Registration (ii)A copy of Memorandum of Association of Society/Trust Deed(iii)A copy of Power of Attorney in favour of the individual to sign the tender documents and create liability against the Society/Trust. (iv)A copy of Rules & Regulations of the Society
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Electrical work in connection with Development of Auto Hub at Ajni Goods Shed.
NGP-L-2026-T-38~CR
NGP-L-2026-T-38
Open
Works - General
12 Months
Nagpur, Maharashtra
₹0
₹1.6 L
19 Aug 2026
19 Aug 2026
1 Sept 2026
79 items across 1 schedule
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 79,14,956.25 | ||
| — | 600.00 | — | — | ||
| SETC of LT PVC insulated, armoured, PVC sheathed Allu. Conductor cables of size 4 Core 185 Sq. mm with aluminium lugs, glands suitable nut bolt etc. | — | — | — | 2,64,282 | |
| — | 1000.00 | — | — | ||
| SETC of LT PVC insulated, armoured, PVC sheathed Allu. Conductor cables of size 4 Core 120 Sq. mm with aluminium lugs, glands suitable nut bolt etc. | — | — | — | 3,08,360 | |
| — | 1500.00 | — | — | ||
| SETC of LT PVC insulated, armoured, PVC sheathed Allu. Conductor cables of size 4 Core 95 Sq. mm with aluminium lugs, glands suitable nut bolt etc. | — | — | — | 4,99,650 | |
| — | 1000.00 | — | — | ||
| SETC of LT PVC insulated, armoured, PVC sheathed Allu. Conductor cables of size 4 Core 35 Sq. mm with aluminium lugs, glands suitable nut bolt etc. | — | — | — | 1,86,230 | |
| — | 1500.00 | — | — | ||
| SETC of LT PVC insulated, armoured, PVC sheathed Allu. Conductor cables of size 4 Core 16 Sq. mm with aluminium lugs, glands suitable nut bolt etc. | — | — | — | 1,87,350 | |
| — | 1000.00 | — | — | ||
| SETC of 2 x 70 sq. mm, XLPE Insulated, 1100 Volts Grade, LT Cable with improved fire performance category C2, Stranded Aluminum Conductor complying with Class 2 of IS 8130, Cores Laid up, Inner sheath of PVC applied by extrusion, Galvanised round steel wire or Galvanized steel formed wire (strip) Armoured, Cores' identification by Coloured strip applied on the cores or by colouring of XLPE insulation, Outer Sheath of PVC Compound applied by extrusion conforming to the requirement of type ST2 as per IS 5831. | — | — | — | 1,71,100 | |
| — | 1000.00 | — | — | ||
| Provision of trench in all kind of normal Soil to depth 40x100cm & filling the trench (After laying cable) to bring the original condition. | — | — | — | 78,580 | |
| — | 2000.00 | — | — | ||
| Provision of trench in hard rock/soil/road track crossing to depth 40x100cm & filling the trench (After laying to bring the original condition. | — | — | — | 3,42,660 | |
| — | 1000.00 | — | — | ||
| Supply and laying of DWC pipe in the cable trenches/under track/ along the poles/DP structures to be provided including all connected Accessories under other sch itemsDWC pipe of dia 120 mm. | — | — | — | 2,18,410 | |
| — | 2000.00 | — | — | ||
| Supply and laying of DWC pipe in the cable trenches/under track/ along the poles/DP structuers to be provided including all connected Accesories under other sch itemsDWC pipe of dia 90 mm. | — | — | — | 4,18,260 | |
| — | 1000.00 | — | — | ||
| Supply and laying of DWC pipe in the cable trenches/under track/along the poles/DP structuers to be provided including all connected Accesories under other sch itemsDWC pipe of dia 63 mm . | — | — | — | 1,36,380 | |
| — | 1000.00 | — | — | ||
| Supply and laying of 63 mm outer dia.( 2") size of HDPE pipe. | — | — | — | 72,020 | |
| — | 500.00 | — | — | ||
| Supply, installation, testing & commissioning of HDPE Pipe 110 mm Nominal Dia as per IS-4984-1995. | — | — | — | 2,07,575 | |
| — | 500.00 | — | — | ||
| SETC of concealed point wiring for light fitting, fan, call bell, Exh/ fan, 5/6 Amps Plug /socket in modular type switches through PVC insulated single core multithreaded 1.5 sq.mm 1100V grade copper conductor with 1 Sq.mm earth continuity wire. | — | — | — | 1,97,985 | |
| — | 100.00 | — | — | ||
| SETC of concealed Power point wiring with 2.5 Sq. mm copper wire for 5/15 Amps plug point in modular type switches with 1.5 Sqmm earth continuity wire. | — | — | — | 39,303 | |
| — | 2000.00 | — | — | ||
| Supplying & erecting mains with FRLSH copper PVC insulated wire of size 2x4 Sq.mm main wire. with earth wire laid in Conduit/trunking /inside pole/Bus bars or any other places. | — | — | — | 82,320 | |
| — | 1500.00 | — | — | ||
| Supplying & erecting mains with FRLSH copper PVC insulated wire of size 2x6 Sq.mm main wire. with earth wire laid in Conduit/trunking /inside pole/Bus bars or any other places. | — | — | — | 77,925 | |
| — | 3000.00 | — | — | ||
| "SETC of cover over platform consisting of 6 run of PVC insulated PVC sheathed 10 Sqmm multistranded wire 650v each wire, with mounting bracket made of ISA 45, reel insulators & GI binding wire, MS clamps made of 50x 6mm thick & required GI hardware." | — | — | — | 1,82,370 | |
| — | 80.00 | — | — | ||
| SETC of Energy Efficient, BLDC AC Ceiling Fan, 1200 mm Sweep, Voltage 170- 250v,Single Phase, Frequency 48-52Hz, Input Power Not More Than 32W, Air Delivery 230 cmm, Speed 380 RPM, Speed Control, Remote Handset, BEE 5 Star Rating With 3Yrs. Warranty, Authorized OEM Certificate & CPRI Test Certificate to be Submitted Along With Supply complete. | — | — | — | 2,16,086.4 | |
| — | 10.00 | — | — | ||
| SETC of 12" metal body type exhaust fan complete with motor guard, cover etc. | — | — | — | 22,701.8 | |
| — | 20.00 | — | — | ||
| "SETC of Heavy Duty BLDC Air Circulator Fan 600 mm sweep (24 inch), speed 1350 RPM (min), Wall mounting type should have Vertical adjustment of 22 Degree to 45 Degree, suitable to work on 230 V,50 Hz, AC Supply, Air delivery 560 +/- 5% cubic meter per minute. Warranty minimum 36 months. " | — | — | — | 2,07,680 | |
| — | 250.00 | — | — | ||
| SETC of Indoor 20 watt box type industrial LED tube complete with associated accessories. | — | — | — | 1,27,267.5 | |
| — | 30.00 | — | — | ||
| SETC of LED flood light fitting 90 Watt with wiring and fixing arrangements complete. | — | — | — | 2,76,756.6 | |
| — | 30.00 | — | — | ||
| SETC of 150 watts Industrial LED Highbay fitting complete. | — | — | — | 4,97,959.5 | |
| — | 10.00 | — | — | ||
| "SETC of single phase DB capacity 40 Amp. RCBO for incomer and various type SPMCB 6-32 Amp (4x6A, 2x10A & 2x16A) for outgoing 8 Nos complete." | — | — | — | 45,503 | |
| — | 4.00 | — | — | ||
| SETC of Three phase Distribution Board having 63 Amps 300 mA 4 pole RCBO-1 no and SP MCB 6-32 Amps-8 Nos (4x6A, 2x10A & 2x16A) on each phase as per requirement complete. | — | — | — | 49,704.84 | |
| — | 4.00 | — | — | ||
| SETC of self contained drinking Water cooler unit (Non CFC Refrigerant) Energy Efficient Compressor IS mark suitable for operation on 230 V +10% 50 cycle single phase AC supply storage cap.150 Ltr, cooling capacity 150Ltr/Hr. complete. | — | — | — | 2,18,962.12 | |
| — | 10.00 | — | — | ||
| Providing & erecting 7 m high (clear height) galvanized octagonal pole with foundation bolts having bottom of 130 mm A/F, top 70 mm A/F on provided foundation with bracket complete.. | — | — | — | 1,69,826.4 | |
| — | 10.00 | — | — | ||
| Making M- 20 grade reinforced cement concrete foundation by considering the safe soil bearing capacity at site as 10 T/sq.m at 1.5 m depth including supply of steel, concrete, excavation and fixing provided nut bolts with the help of template, duly plastered as per design complete (for 6m to 8m high octagonal /conical GI pole). | — | — | — | 38,078.3 | |
| — | 10.00 | — | — | ||
| SETC of 45 W LED street light fittings complete with die cast aluminium housing with heat resistant toughened glass with mounting arrangement i.e. clamp, nut, bolts fitting arrangement complete. | — | — | — | 42,510.1 | |
| — | 2.00 | — | — | ||
| SETC of astronomical automatic street light control panel out-door type CRCA sheet steal powder coated capacity 6 KW single phase consisting digital 24 Hr timer, 32 Amp TP contactor 40 A SPN (DP) MCB, Auto/ Manual switch with complete wiring suitable for mounted on channel/ angle fixed at electrical pole, protection - IP 32.with 100 AMP MCCB for main supply complete. | — | — | — | 22,527.88 | |
| — | 2.00 | — | — | ||
| SETC of 25 Mtrs high mast system with its accessories including design and casting of suitable foundation with M20 concrete for high mast towers and control panel etc. complete as per Railway's specification. | — | — | — | 5,99,441.36 | |
| — | 16.00 | — | — | ||
| SETC of 400 Watts LED flood light fitting complete all accessories & with wiring etc for high mast. | — | — | — | 3,80,535.2 | |
| — | 25.00 | — | — | ||
| Supply, installation & commissioning of precooling terminal insulated plug socket assembly, 3 phase, neutral & earth, of 125 Amp capacity as per specification complete. | — | — | — | 5,03,046.5 | |
| — | 25.00 | — | — | ||
| SETC of O/D type 110 V battery charging point, consist of 63 A, 250V,DC, DPMCB, housed in 14 SWG CRCA steel hot dipped galvanised enclosure with stand. | — | — | — | 1,32,344.75 | |
| — | 2.00 | — | — | ||
| Provision of 415V 3 phase 110-150V DC capacity 200 Amps 110 V rectifier for TL coach charging. | — | — | — | 3,94,741.62 | |
| — | 15.00 | — | — | ||
| Provision of maintenance free earthing as per RDSO specification no. RDSO/PE/ SPEC/ PS/0109- 008(REV'0') complete. | — | — | — | 1,99,217.1 | |
| — | 100.00 | — | — | ||
| Supply and erection of GI Flat of size 25x3 mm from earth pit with GI nut Bolt suitable size. | — | — | — | 8,732 | |
| — | 1.00 | — | — | ||
| SETC of outdoor type LT Distribution Panel 16 SWG CRCA steel sheet, suitable 200 Allu bus cap consisting with FP MCCB 200A-3 Nos, MCCB, 100 Amps-4 Nos with electronic KWH meter 50A 2 Nos VA Meter LED indicator etc complete with accessories, bracket and fixing arrangement. | — | — | — | 90,573.28 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
Advancedcorrectionslip8_1.pdf
ATTACHMENT
advancedcorrectionslip09.pdf
ATTACHMENT
advancedcorretionslip10.pdf
ATTACHMENT
ACSEMDandAdditionalPG_compressed.pdf
ATTACHMENT
AdvanceCorrectionSlipNo_12_compressed.pdf ACS12
ATTACHMENT
RDSOsoecificationforearhing1.pdf
ATTACHMENT
Annexure-VA1.pdf
ATTACHMENT
tenderbooklet.pdf
ATTACHMENT
Specificationceilingfan.pdf
ATTACHMENT
GCCupdated25.09.2024.pdf
ATTACHMENT
AdvanceCorrectionSlipNo_12_compressed.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].