Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹68.6 LAccepted-AOC | 1 | Accepted-AOC L1 bidder | |
| 2 | 2₹73.9 L+₹4.0 L (5.72%)Rejected-Finance | 2 | Rejected-Finance Not being lowest |
Tender Value
₹65.0 L
EMD Value
₹1.2 L
Closing Date
27 Oct 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE SHILLONG
HQ CWE SHILLONG SE FALLS SHILLONG 793011
MISC REPAIR WORKS B/R AND E/M, PERIODICAL SERVICES, REPAIR/REPLACEMENT AND CLEANING OF SEWAGE LINE TO MD ACCN AND OTM BLDGS OF DAD COMPLEX AND AAO SHILLONG UNDER GE SHILLONG
2022_MES_547997_2
8583/SHL/E8
Open Tender
Civil Works
Item Rate
180 days
SHILLONG
Please refer Tender documents.
8 documents required · 8 mandatory
₹1,000
GE SHILLONG
₹1.2 L
Yes
5 Dec 2022
6 Oct 2022
28 Oct 2022
6 Oct 2022
27 Oct 2022
13 Oct 2022
Amount
Demolition of cement concrete (unreinforced) in ground floor and paving n.exc 15cm thickness (below/above ground level) complete all as specified and as directed.
Demolition of plain cement concrete of any description and in any position not otherwise specifically provided for coping, benching & bed/foundation concrete complete all as specified and as directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.
Material and Labour for light shade vitrified ceramic tiles 10 mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 Sqm, in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in CM 1:6 complete all as specified and as directed
Material and Labour for light shade vitrified ceramic tiles 10 mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 Sqm, in skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10mm thick rendering in CM 1:4 complete all as specified and as directed
Material and Labour for Non skid joint free ceramic tiles, 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with the tile colour over 15mm thick screed bed in CM 1:6 complete all as specified and directed
Material and Labour for outdoor coloured vitrified paving tiles, joint free(edge cut) of size 300x300x8 to 10mm thick as in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in cement sand mortar 1:4 complete all as specified and as directed
Material and Labour for outdoor coloured vitrified paving tiles, joint free(edge cut) of size 300x300x8 to 10mm thick as in skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement over 10mm thick rendering in CM 1:4 complete all as specified and as directed.
Material and Labour for Glazed ceramic coloured tiles in vertical surface of size 300x450mm, 7-8mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match with the tile colour over 10mm thick backing coat in CM 1:4 complete as specified and directed.
Material and Labour for Stone finish Glazed ceramic coloured tiles for out door wall cladding in vertical surface of size 300x200/600x300/300x450mm, 7-8mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match with the tile colour over 10mm thick backing coat in CM 1:4 complete as specified and directed.
Material and Labour for 75mm thick PCC 1:3:6 type C2 using 40mm graded stone aggregate as in plinth protection/hard standing finished even and fair with 10 mm joint filled with bitumen mastic (mix of bitumen and sand at 3m intervals complete all as specified and directed.
Material and Labour for Providing cement concrete type C-1, 1:3:6 mix (using 20 mm graded stone aggregate) in bed blocks, Kerbs, Plinth couses , coping etc complete all as specified and directed.
Material and Labour for sand filling, spreading and levelling and making the surface to receive interlocking tiles complete all as specified and directed.
Material and Labour for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade all as specified and directed.
Material and Labour for machine pressed pre polished chequered cement concrete tiles 300 X 300 X 25mm thick over 15mm thick screed bed in CM 1:6 set & jointed in neat cement slurry & pointed in white or coloured cement to match as in floor complete all as specified and directed.
Material and Labour for PCC (1:3:6) type C-2 using 40 mm graded stone aggregate as in surface channel and drains etc complete all as specified and directed.
Extra for forming fair finished drain or channel 30cm inner girth in cement concrete using extra cement including forms, moulds, mitred/stopped ends etc all as specified and directed.
Material and Labour for 100 mm thick PCC 1:2:4 type B1 using 20mm graded stone aggregate as in hard standing finished even and fair laid in alterrnate bays of size not exc 2 m X 2m with construction joints and filled with joint sealing compound complete all as specified and directed.
Dismantling of plain or corrugated AC/ steel /fibre glass reinforced transluscent sheeting any guage thickness including nainital or similar pattern roof covering complete all as specified and directed.
Dismantling wrought iron or mild steel work of any description not otherwise provided complete all as specified and as directed.
Material and Labour for PCC (1:3:6), type C2 (using 40 mm graded stone aggregate) as in post filling and mass concrete including all necessary form work complete all as specified and directed.
Material and Labour for mild steel work for posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc. flat iron fillets, including all necessary drilling, bolting or riveting, etc and similar work conforming to Fe-290 Gde E-165 complete all as specified and as directed.
Material and Labour for steel work roof trusses (framed), trussed,purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc conforming to IS-1161-1979 grade St-240 complete all as specified and directed.
S&F pre-painted Galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick having tensile strength 550 Mpa as in roof covering / cladding to wall including fixing with self tapping screws washers, profile, shape and colour as approved by GE, complete all as specified and directed..
S&F pre-painted Galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick having tensile strength 550 Mpa as in roof covering / cladding to wall including fixing with self tapping screws washers, profile, shape and colour as approved by GE, complete all as specified and directed.
S&F 0.63mm thick galvanised, corrugated mild steel sheeting with one and half corrugations side lap, fixed with J or L type hook and washers, in roofs, walls etc. with grade of zinc coating 120 g/sqm (Class 8) complete all as specified and directed.
S&F 0.63mm thick plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 120 g/sqm complete all as specified and directed.
Dismantling of wall/ceiling boards (fibre, pulp,insulation, etc.) or insulation boards/ slab/blankets, any thickness including cover fillets complete all as specified and directed.
S&F Anodised Aluminium frame work for snap grid false ceiling comprising of Gl perimeter channnel 0.55 mm thick with Aluminium main T- flange of 25 mm and web of 30 mm fixed to surrounding wall angle with flange and web 25 mm each , Cross T with flange 25 mm and web 25 mm fixed to main T, Main T is suspended from soffit @ 1200 mm c/c using Gi wire of 4mm thickness, Aluminium frame will be 60cm x 60 cm to recieve ceiling board complete all as specified and directed.
Material and Labour for 4mm thick E - boards 600 mm x600 mm prepainted fibre boards ceiling designer/decorative type with different designs as approved by the GE fixed or laid in ceiling timber /GI/ aluminium frame work in ceiling flat or sloping complete all as per manufacturer instruction complete all as specified and directed.
Dismantling boarding ,aluminium partitions any description fixed in any position with nails etc complete all as specified and directed.
S&F 20 mm thick 2nd class hard wood boarding in eaves board/fascia plained one side with butt joints fixed with nails complete all as specified.
Taking down chowkhat with shutter (without taking off shutter from the frame) and area exc 1.5 sqm but n.exc 4 sqm each complete all as specified and directed.
Taking down chowkhat with shutter (without taking off shutter from the frame) and area n.exc 1.5 sqm each complete all as specified and directed.
Taking down shutter of any description exc 1.0 sqm but n. exc 2.0 sqm each complete all as specified and directed.
Taking down shutter of any description n. exc 1.0 sqm each complete all as specified and directed.
S&F second class hard wood plain, solid, straight chawkhat and frame, wrought, framed, rebated on the solid rounded or chamfered, put together with glue pinned at joints complete all as specified and directed.
S&F 30mm thick flush shutter solid core construction with block board core and plywood face panels, decorative face veneer with lipping/frame to match on both sides complete all as specified and directed.
S&F second class hard wood glazed and skeleton shutters, 35mm thick, open rebated & prepared to receive wire gauge (with sash bars) edges of framing plain chamfered or rounded, fitted with cut and mitread beads for securing glass etc, sizes of members of shutters as specified in SSR Pt-I, section 8, clause 8.24- (a), supplied and fitted to chowkats complete all as specified and directed.
Material and Labour for 30mm thick second class hard wood factory made glazed and skeleton shutter, open rebated and prepared to receive glass, gauge etc. devided into squares with plain chamfered or rounded, mitred and rebated sash bars edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc. sizes of members of shutters as specified in SSR Part-I Section-8 clause 8.24(b) complete all as specified and directed.
Material and Labour for 18/19 mm thick Prelaminated particle board, exterior grade, prelaminated one side with decorative choice laminations and other side balancing white lamination fixed with screws as in cabinet / cup-board completed all as specified and directed.
S&F Continuous (Piano) hinges, brass, width of flaps 30 mm (when open) complete all as specified and directed.
S&F in repair Magnet catches for cupboard shutter, brass body and striking plate including letting in complete all as specified and directed.
S&F Butt hinges, medium weight, cold rolled mild steel, size of hinges 100 mm complete all as specified and directed.
S&F Butt hinges, medium weight, cold rolled mild steel, size of hinges 75mm complete all as specified and directed.
S&F Extruded Aluminium, anodised, bow handles of size 150mm complete all as specified and directed.
S&F Extruded Aluminium, anodised, bow handles of size 100mm complete all as specified and directed.
S&F aluminium anodised barrel bolts and fixed of 200 mm length complete all as specified and directed.
S&F aluminium anodised barrel bolts and fixed of 100 mm length complete all as specified and directed.
S&F Mild steel sliding door bolt, plate type stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate, length of bolt 300mm complete all as specified and directed.
S&F floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor, overall length of cover plate 140mm complete all as specified and directed.
Hacking out old broken glass (any thickness, size, quality or description) from wooden frame including taking out old wooden beads complete all as specified and directed.
S&F 3 mm thick figured glass, pin head type and glazing with oil putty or wooden beads in squares n.exc 0.5 sqm in each pane complete all as specified and directed.
S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty or wooden beads in square n exc 0.5 sqm in each pane complete all as specified and directed.
S&F Galvanized mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperature 1.18 mm fixed with stainless steel wire staples/beads complete all as specified and directed.
S&F in repair Galvanized mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperature 1.18 mm fixed with stainless steel wire staples/beads complete all as specified and directed.
S&F in repair 25 mm dia aluminium drapery rod with wooden finish, decorative, including brackets, decorative finials at both ends (minimum) in one opening complete all as specified and directed.
Demolition of precast concrete block walling built in cement mortar complete all as specified and directed.
Demolition of reinforced cement concrete of any description in any position not otherwise described complete all as specified and directed.
Taking down Cement Plaster of any description on Brick Walls, Concrete Surfaces including Racking out Joints, hacking for Key, scrubbing down with Water, etc. complete removal of debris outside MD land complete all as specified and directed.
Material and Labour for Precast cement concrete block masonry with solid block exc 10 Cm in width, type C1 (1:3:6) (using 20mm graded stone aggregate) and setting in CM 1:6 complete all as specified and directed.
Material and Labour for Precast RCC type B1 (1:2:4) (using 20mm graded stone aggregate) as in cover slab, landing, shelves, chhajja and similar artical with plane face set in CM (1:6) complete all as specified and directed.
Material and Labour for PCC 1:4:8 type D-2 (using 40mm graded stone aggregate as in fdn filling and mass concrete complete all as specified and directed.
Material and Labour for M.S. TMT steel bars 10mm dia and over, cut to length bent to shape required including cranking bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips all as specified.
All as per Item No. 64 here-in-before but 6 mm to 8 mm dia as in stirrups, spacers, binders, nibs for fencing posts complete all as specified and directed.
Material and Labour for RCC 1:1.5:3 type A1 (using 20mm graded stone aggregate) as in column footings complete all as specified and directed.
Material and Labour for RCC 1:1.5:3 type A1 (using 20mm graded stone aggregate) as in column/gate pillars complete all as specified and directed.
Use & waste of formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter, rough finish surfaces of concrete (Flat) complete all as specified and directed.
Use & waste of formwork to the flat concrete retangular surfaces of pillars of gate for fair finished surfaces
Material and Labour for rendering 15mm thick in CM (1:4) in two coats (10mm and 5mm thick) mixed with water proofing compound mixed with 5mm thick layer on fair faces of brick work or concrete surfaces including finishing the surface even and smooth without using extra cement, complete all as specified and directed. Note: Water proofing compound shall be measured and paid separately.
Material and Labour for rendering 10mm thick in CM (1:6) on fair faces of brick or concrete surfaces including finishing even & fair without using extra cement complete all as specified and directed.
Supply only integral Water proofing compound (ISI Mark).
Material and Labour for mild steel work for posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc. flat iron fillets, including all necessary drilling, bolting or riveting, etc and similar work conforming to Fe-290 Gde E-165.
Material and Labour for framed wk confirming to Fe.290 Gde-E-165 as in doors or gates of angle or other section with gusset plates, rails, braces etc complete, drilled for fixing of steel sheeting or other covering, doors etc to be prep for hanging or sliding with and incl either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and ganging, also fastening and fixing complete all as specified and directed.
Material and Labour for Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc confirming to Fe 410 -W (Gde- E- 250) quality-A complete all as specified and directed.
Material and Labour for Granite 18-20mm thick (table rubbed and polished) in steps, jambs, pillars, win dow-cills, cooking plat forms and like in cement mortar (1:4) including point ing in white cement (1:2) using marble dust with admix ture of pigment to match with shade of granite complete all as specified and directed.
Material and Labour fo Acrylic digital sign board Arch type box 8.50x0.60mtr' , width of the box 30cm .top and bottom of box 1.5mm thick aluminium sheet , 50mm dia MS pipes for making box type arches including welding , bending and screws, and aluminium L (20x20mm) for out side corners, inside 4x LED tubelights with necessary wiring complete board fixing on gate pillars and the two sides of the sign board should be retro reflective sheets (blue & white colour)and letter writing (size of letters and sample of board shall be carried out as directed by Engineer-in-Charge) including taking down old one complete all as specified and directed.
Material and Labour fo Acrylic digital sign board of size 0.90x0.60mtr' embedded all around 25x25mm stainless steel hollow section screwed all around Stainless steel 50mm dia hollow tubes and 1.80mtr both sides standing SS pipes of dia 50mm fixed on ground and the two sides of the sign board should be retro reflective sheets (blue & white colour)and letter writing (size of letters and sample of board shall be carried out as directed by Engineer-in-Charge) including taking down old one complete all as specified and directed.
S&F in repair Vitreous China Wash Hand Basins, size 550 X 400 mm (Flat Back or Angle Back type) including Pillar Taps 15mm Bore Cast Copper Alloy with Capstan Heads, Chromium Plated, fancy type, 32mm dia Brass Chromium Plated Waste Fitting and PVC connection pipe of 15mm x 600mm long, a Pair of Angle iron Brackets duly Painted/Erecting Stand including Cutting and Pinning in Ends, Making Good Disturbed Surfaces in Cement Mortar 1:3 complete all as specified and directed.
S&F in repair Health faucet (ABS Body) mild steel chroumium plated suitable for 15mm dia pipe with 1.25metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed.
S&F in repair Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) complte all as specified and directed.
S&F in repair Vitreous china squatting pan, 'Orissa' pattern, size 580 X 440 mm white, with integral foot rests including provision of lime concrete bedding, fixing of flushing cistern complete all as specified and directed.
S & F in repair Vitreous China EWC including seat cover closed pattern single piece size 755x365x655 complete all as specified and directed. Make Jaguar Cat Part No :- LYS-WHT-38851PSM or equivalent in make cera, parryware or Hindware
S&F in repair PVC valveless, syphonic action type flushing cistern, low level, white, 10 Ltr capacity with inlet, ball valve, float and handle including brackets complete all as specified and directed.
S&F rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position of capacity 1000 Ltrs incl taking down old unservicable tank of any description and in any position complete all as specified and directed.
S&F rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position of capacity 500 Ltrs incl taking down old unservicable tank of any description and in any position complete all as specified and directed.
Taking up or down steel tubing and connections for 15 mm bore of pipes complete all as specified and directed.
Taking up or down steel tubing and connections for 20 mm bore of pipes complete all as specified and directed.
S&F GI steel tubing medium grade 15mm bore with all fitting and fixed complete to wall and ceiling or laid under in floor complete all as specified and directed.
S&F GI steel tubing medium grade 20mm bore with all fitting and fixed complete to wall and ceilings or laid in floors complete all as specified and directed.
S&F in repair Bip tap, chromium plated, 15mm fancy type,complete all as specified and directed.
S&F in repair Angular stop cock, fancy type, chromium plated, 15 mm bore complete all as specified and directed.
S&F in repair PVC connections 15 mm size with PTMT nuts of length 450mm complete all as specified and directed.
S&F in repair ball valve of size 20mm, high pressure, with polyethene float and fly nut, screwed for iron pipe complete all as specified and directed.
S&F in repair Gun metal gate 20mm valve class I (ISI) marked with iron wheel head, screwed both ends for iron pipe, suitable for pipe complete all as specified and directed.
S&F in repair PVC (SWR) 110 mm bore pipes single socketed in any length with rubber ring joints, fixed to walls/floor including necessary sockets, fitting and clamps for securing pipe complete all as specified and directed.
S&F in repair PVC (SWR) 75mm dia pipes single socketed in any length with rubber ring joints fixed to walls/floor including necessary sockets, fitting and clamps for securing pipe complete all as specified and directed.
S & F in repair for PVC pipes 180mm half round fixed as valley gutter pipe at roof level and walls including joint bracket, running outlet,L bow, stop end, stop end outlet, support bracket fixing at 1mtr distance each complete all as specified and directed.
S&F in repair PVC (SWR) bend with access door of any radius 110mm bore complete all as specified and as directed.
S&F in repair PVC (SWR) bend with access door of any radius 75 mm bore complete all as specified and as directed.
S&F in repair 75mm dia PVC (SWR) floor trap with CP grating including jointing with solvent cement to pipe complete all as specified and directed.
S&F in repair for CP grating doom 100mm dia complete all as specified and directed.
S&F Stainless steel kitchen plate rack of size 36" X 36' X 10" made out of stainless steel sheet of 1.00 mm with all accessories including taking down old unservicable rack complete all as specified and directed. (Make : Blue star, Cat No - BSKPR-314 or equivalent)
S&F in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs washers and wastes incl bedding in CM to dwarf wall or incl fixing cantilever brackets and connecting union to pipe overall size 915x460 mm bowl size 410mmx360mmx160 mm complete all as specified and directed.
Removing existing water proofing treatment along with PVC sheets disposing off MoD premises and rendering and carry out the following works for roof treatment a) 15mm thick in CM 1:4 screed bed by hacking out the existing roof slab. b) Cleaning of plastered roof surface and applying one coat of cold bituminous primer @ 0.25ltrs per sqm confirming to IS:3384- 1986. c) A layer of APP based polymeric membrane 3mm thick (minimum) weighing 3.5kg/m² reinforced with polyester non woven fabric (weighing not less than 160 gms/sqm) shall be applied over bituminous primer. Application of APP membrane over primer shall be done by torch application. The overlap shall be minimum 100 mm on the transverse direction and 75mm on longitudinal direction. (iv) Applying one coat of aluminum paint over the APP modified membrance @ 0.11Kg/sqm. (NOTE:- The work of water proofing treatment shall be got executed through expert team of manufacturers or authorised applicator of manufacturer contractor shall be submitted documentary evidence in support of applicator engaged for approval of GE.)
Material and Labour for taking down of existing sunken slab treatment form the sunken portion and cleaning the surfaces by washing down with water and rubbish off the premises. (a) Cleaning and filling cracks with sealing compound, brushing neat with neat cement slurry @ 3.00 kg/ sqm and grouting in 25 mm thick plain cement concrete 1:2:4 type B-0 (using 12.5 mm graded stone aggregate) over sunken slab portion and finishing the top surfaces even and smooth without using extra cement . (b) Material and Labour for two coats of acrylic cementitious water proofing coating (Dr Fixit pidifin 2K manufactured by M/s Pidilite industries Ltd or equivalent make as approved by GE) and followed by a overlay protective 15 mm thick screed/ rendering in CM 1:3 along with liquid water proofing at appropriate ratio of approved make on top surfaces of sunken slab after preparations as mentioned above. Method of application for acrylic cementitious water proofing coating is followed as per manufacturers instructions. (Note : Cost including the lean concrete 1:4:8 for sunken portion area where demolition/dismantling carried out to the sunken floor.)
Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and directed by Engr-in-Charge
S&F powder coated anodized aluminium frame for doors / windows / ventilators / partitions and for fixing aluminium composite panel, glass etc with one or more rebates including joining cleats, rubber gasket for fixing etc complete all as specified and as directed.
M & L for Powder coated anodized aluminium door shutters of aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, powder coated aluminium handles 150mm size 2 Nos, 3 Nos powder coated aluminium hinges heavy duty and 02 Nos 150mm long powder coated aluminium tower bolts in each door shutter with powder coated aluminum snap beading, screws etc. complete all as specified and directed Note : Panel filling ie. glass, fibre sheet, board etc. shall be measure and paid for separately.
S&F Powder Coated aluminium anodised skelton windows & ventilator shutter fixed with glass and gauge, sliding or side hung type without sash bars using standard aluminium section (Shutter section weight not less than 0.55KG/RM) , jointing cleats, glazing clips, rubber packing anodised aluminium snap beadings screws, anodised aluminium fittings such as handles,toerbolt, stainless steel adjustable friction stay hinges etc complete all as specified all as specified and directed by Engineer-in-Charge. NOTE: (i) Unit rate quoted shall deemed to include cost of rubber beading, fittings such as handles, SS friction stay hinges, tower bolt and fixing of 5.5mm glass etc. (ii) Supply only 5.50 mm thick sheet glass be measured and paid separately.
Excavation in trenches n.exc 1.5 m wide and n.exc. 1.5 m in depth and getting out in any type of soil complete all as specified and directed.
Complete removal of existing treatment on wall/ roof projections including facia, cornices etc by scrapping with mechanical sander (having mechanical vaccum mechanism) with sanding pad of appropriate grit to make surface clean,free from dust, loose paint etc by skilled labour complete all as specified and directed.
Material and labour for waterproof cement based putty @ 1 Kg(undiluted) per sq mtr. of average thickness 1 mm over the plastered/old painted wall after scrapping to prepare the surface even and smooth complete and sanding of the putty surface with mechanical wall sander (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 240 Grit or above to make the surface free from dust etc. by skilled labour as per following steps:- Step 1) Mix the putty powder by adding water as per manufacturer instructions and mix it with putty mixer with the mixing capacity of min 2.5 kg putty per minute. Step 2) Apply the first coat the prepared mixer with the help of fully automatic airless spray machine of putty application having flow speed of max 6 ltrs per minutes with a maximum pressure 3300 PSI. Step 3) Allow 6-8 hrs time to dry the putty surface.
Material and labour for applying two coats of oil bound distemper using Airless spray technology with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying distemper should be able to spray in hard to reach areas and penetration of distemper on the surface complete all as specified and directed. Note : - Sanding of surface to be done by mechanical sander with 1500 - 2700 rpm, with internal dust extraction system for clean environment certified by paint manufacturer. Proper masking to be carried out before primer and paint application).
Material and labour for preparation of new plastered surfaces of walls and applying two coats of oil bound distemper using Airless spray technology with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying distemper should be able to spray in hard to reach areas and penetration of distemper on the surface complete all as specified and directed. Note : Sanding of surface to be done by mechanical sander with 1500 - 2700 rpm, with internal dust extraction system for clean environment certified by paint manufacturer. NOTES FOR ITEM NO. 114 to 116 :- (a) The work pertaining to periodical services & Water Proofing shall be executed by authorized applicator through manufacturer of which the materials .i.e. Paint, Distemper, Putty etc. is proposed to be used by the contractor and approved by GE. (b) Cost of scaffolding upto 10m height of building shall be included in the quoted rate. (c) The contractor shall upload MOU letter with any one of manufacturer and also with their authorised applicator mentioned in the tender alongwith their bid in cover-I failing which his bid will be rejected. Authorised applicator shall have valid authorisation letter from the manufacturer (Minimum regional HQs) and shall have been issued not less than 30 days from the date of commencement of the work. The authorisation letter needs to be valid for the complete period of execution of the painting work. (d) After preparation of the surface, Engr-in-Charge shall approve the same before applying primer and finishing coats. (e) Building wise stage passing register shall be maintained and shall be signed by Engr-in-Charge and contractor. (f) The equipments to be used in the work shall be certified by the manufacturer with whom the MOU been entered into. (g) Contractor shall submit approved company generated 05 years warranty card at the time of submission of RAR & Final Bill.
Material and Labour for finishing walls with textured exterior/interior paint of required shade : New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of primer applied @ 2.20Kg/10sqm including preparation of old walls surfaces complete all as specified and as directed.
Material and Labour for preparation of new or previously untreated surfaces of wood and wood based materials of any description not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.
Material and Labour two coats of synthetic enamelled paint over a coat of red oxide primer incl prep of new steel surfaces complete all as specified.
S & F stainless steel letters (polished) silver colour size of each letter 30cm height, 20cm width and thick 5cm fixed on wall/board with fixing arrangements (hold fastner, welding etc) complete all as specified and directed by Engr-in-Charge.
S & F stainless steel letters (polished) silver colour size of each letter 20cm height, 10cm width and thick 5cm fixed on wall/board with fixing arrangements (hold fastner, welding etc) complete all as specified and directed by Engr-in-Charge.
Material and Labour for writing black/brass colour letters and creating logo on and including 2mm thick glossy mirror finish stainless steel sheet (Round/Square as reqd shape) fixing on walls with hold fastner complete all as specified and directed.
Material and Labour for writing brass colour letters and borders on and including Granite 18-20mm thick (table rubbed and polished) and embedding on walls complete all as directed by Engr-in-Charge
Cleaning of manholes not exceeding 1.5m depth and removing the sludge and burying the waste material in borrow pits. Note:- (Cost of the borrow pit shall be deemed to be included in the quoted rates of this item) complete all as specified and directed.
Cleaning of SWG Pipe 100/150 mm internal dia of depth upto 1 m by rodding or by using pressure pump completely including man holes and removal of sludge to a distance exceeding 1.5 Km but not exceeding 5 Km complete all as specified and directed.
Material and Labour for DWCPE(SN8) pipes nominal dia 150(Inner Dia) mm diameter Pipes) laid on any depth of trenches including jointing/cutting as required length pipes with jointing with socket/spight with elastomeric sealing complete activities to execute and make sewer line functional complete all as specified and directed.
Excavation over areas not exc. 1.50 m deep and getting out in soft / loose soil complete all as specified and directed.
All as per Item No. 127 here-in-before but for exc 1.5m complete all as specified and directed.
Material and Labour for reinforced cement concrete M-25 (design mix) as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete (Grade M25) complete all as specified and directed.
Use & waste of formwork to faces of walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pillasters, buttresses, etc.; vertical or to batter, rough finish surfaces of concrete (Flat) complete all as specified and directed.
Material and Labour for reinforced cement concrete M-25 (design mix)in:-Walls, retaining walls, basement walls, ballast walls and the like; any thickness; above top of footings; including attached pilasters and buttresses complete all as specified and directed.
Use & waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed.
Material and Labour for reinforced cement concrete M-25 (design mix) Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.
Material and Labour for cement concrete type B2 1:2:4 (using 40mm graded stone aggregate) as in foundations, filling and mass concrete without using extra cement using WPC complete all as specified and directed.
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm.(Soft /Loose Soil) complete all as specified and directed.
Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed.
Use and waste of form work to sides/soffits of Lintel Beam complete all as specified and directed.
Material and Labour for reinforced cement concrete M-25 Design mix in Lintel beam complete all as specified and directed.
Material and Labour for reinforced cement concrete M-25 Design mix in columns complete all as specified and directed.
M & L for broken brick coarse aggregates less than 63 mm size complete all as specified and directed
Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc complete all as specified and directed.
Material & Labour for Point wiring with two single core 1.5 sqmm (nominal area), FRLSH, ISI marked PVC Insulated unsheathed multistranded copper cable, 1100 volts grade including PVC Casing capping (medium grade) of suitable size with all fittings and accessories including PVC rectangular board of suitable size, andFRLSH, ISI marked PVC insulated unsheathed single core multistranded copper cable of size 1.5 sqmm green in colour as earth continuity conductor connected to common earth dolly for one light/fan point controlled by one way switch complete all as specified and directed.
All as per Item No. 142 here-in-before but for one 2/3 pin socket outlet, 5 Amps on independent board, complete all as specified and directed.
All as per Item No. 142 here-in-before but for one 2/3 pin socket outlet, 5 Amps on same board complete all as specified and directed.
All as per Item No. 142 here-in-before but with FRLSH, ISI marked PVC insulated and unsheathed two single core multistranded copper cable of size 2.5 sqmm for one power point ,3 pin 15 Amps on independent board includingFRLSH, ISI marked PVC insulated unsheathed single core multi-stranded copper cable of size 2.5 sqmm green in colour as earth continuity conductor connected to common earth dolly complete all as specified and directed.
All as per Item No. 142 here-in-before but for one call bell point controlled by one push button switch, complete all as specified and directed.
Supply and fix bell push, piano type, 6 A, single pole, 230 V, ISI marked all as specified and directed.
Supply and fixing call bell ding dong, AC, 230 V, Single pole ISI marked all as specified and directed.
Supply and fix switch piano (ISI marked) Single pole 240 volts, 5Amps all as specified and directed.
Supply and fix socket outlet (ISI marked), 2/3 pin and 5 Amps, 240 volts, complete all as specified and directed.
Supply and fix switch socket combination (ISI marked) 2/3 pin and 5 Amps, flush type, 240 volts complete all as specified and as directed.
Supply and fix switch socket combination (ISI marked) 2/3 pin and 15 Amps, flush type, 240 volts complete all as specified and directed.
Supply and fixing LED batten fittings 1x18/20 Watt complete pre wired fixed to wall with 2 nos PVC block of suitable size including taking down old unserviceable one .
S & F wall mounted LED batten fittings with all accessories 1X 10 Watt LED, extruded polycarbonate, integrated electronic driver and fixed to wall with 2 Nos PVC block suitable size complete all as specified and as directed including taking down old unserviceable light fittings.
S & F Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings.
Material and Labour ceiling rose, 3 terminals PVC/polycarbonate, isolated body complete all as specified and directed.
Supply and fix in repair MCCB Distribution board, VTP&N , loadline , double door, ,sheet steel, enclosure powder coated with 200 Amps rated busbar with neutral link,415 Volts 4 way fixed on wall duly grouted in solid block wall or on wooden board with electrical connection complete all as specified and directed.
Supply and fix in repair MCB Distribution board , 240 volts single pole and neutral ,double door, sheet steel, enclosure powder coated with 200 Amps rated busbar with neutral link, 12 ways , fixed on wall duly grouted in solid block wall or on wooden board with electrical connection complete all as specified and directed.
Supply and fix in repair MCB Distribution board , 240 volts single pole and neutral ,double door, sheet steel, enclosure powder coated with 200 Amps rated busbar with neutral link, 8 ways , fixed on wall duly grouted in solid block wall or on wooden board with electrical connection complete all as specified and directed.
Supply and fix in repairs MCB Distribution board , 240 volts single pole and neutral ,double door, sheet steel, enclosure powder coated with 200 Amps rated busbar with neutral link, 4 ways , fixed on wall duly grouted in solid block wall or on wooden board with electrical connection complete all as specified and directed.
Supply and fix MCCB four pole , 415 Volt, 125 Amps,16 KA , fixed thermal & fixed magnetic setting complete all as specified and directed.
Supply and fix as in repair MCCB four pole , 415 Volt, 63 Amps,10 KA , fixed thermal & magnetic setting complete all as specified and directed .
Supply and fix in repair MCB, SPN, 240 Volt, 32 Amps, 10 kA rupturing capacity 'C' series, AC complete all as specified and directed by Engr-in Charge.
Supply and fix in repair MCB, TPN, 240 Volt, 63 Amps, 10 kA rupturing capacity 'C' series, AC complete all as specified and directed by Engr-in Charge.
Supply and fix MCB SP, 240 Volt, 6-32 Amps, 10 kA rupturing capacity 'C' series complete all as specified and directed iIncluding taking down old one.
Material and labour for sub main wiring with two single core 6.0 sqmm FRLSH, ISI marked PVC insulated multi stranded, unsheathed copper conductor cable and one single core unsheathed FR , ISI marked, PVC insulated multistranded copper conductor cable of size 6.0 sqmm green colour as earth lead including PVC casing capping of suitable size complete all as specified and directed, including taking down unservicable one.(Note: two run of 6.0 sqmm cable , one run of earth wire of 6.0 sqmm and one run of PVC casing capping shall be measured as one length).
Material and labour for sub main wiring with two single core 4.0 sqmm FRLSH, ISI marked PVC insulated multi stranded, unsheathed copper conductor cable and one single core unsheathed FRLSH , ISI marked, PVC insulated multistranded copper conductor cable of size 4.0 sqmm green colour as earth lead including PVC casing capping of suitable size complete all as specified and directed, including taking down unservicable one.(Note: two run of 4.0 sqmm cable , one run of earth wire of 4.0 sqmm and one run of PVC casing capping shall be measured as one length).
Supply and fix in repair LED lamp 7Watt B22 complete including taking down old unserviceable one all as directed.
Material and labour for earthing complete with galvanised steel earth plate electrode 60 Cm X 60 Cm X 6 mm buried directly in ground vertically to a depth notless than 2.25 mtr deep below ground level with top edge of earth plate at a depth not less than 1.5 m below normal ground level connected to galvanised earth lead wire 4.0 mm dia by means of bolts, check nuts and washers ,galvanised steel and protected by GI pipe 15 mm bore light grade & connected to main switch board or main control board as directed and including concrete pit in PCC (1:3:6) type C1, precast RCC (1:2:4) type B1 cover slab 30 cm X 30 cmX 5 cm with 10mm dia TMT bars 8 cm C/c both ways and one handle for lifting made out of 8 mm dia TMT bar, funnel, wire mesh, 20mm bore galvanised iron pipe (medium grade) for watering, charcoal or coke and salt in alternative layers, necessary excavation and earth work in any type of soil and including necessary testing complete all as shown in Electrical Plate No 3 of SSR part -I.
S & F Wall bracket decorative LED Light fitting with lamp 9 Watt complete with necessary connection including taking down old unserviceable one.
Supply and fixing in repair Building light LED 35 Watt including connection with three core cable 1.5 sqmm complete all as specified and and directed.
S & F in repair exhaust fan 230 volts , 250mm,plastic body Ventilator DX including making all electric connection complete all as specified and as directed including cutting of hole on wall and makng good disturbed surface of wall and outer wooden box for fan fix on wall Make Orient/Bajaj/Havell's/CG Note:- Old unserviceable exhaust fan obtained after taking down shall be deposited to MES store..
Excavation in trenches n exc 1.5 mtr wide and depth n exc 1.5 mtr deep for foundation, laying GI pipes and UG cables etc n exc 10 sqmtr on plan, in hard/dense soil and getting out complete all as specified and directed.
Returning filling in including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and directed.
M & L for providing dry river sand as in sand cushioning to UG cable including punning gently complete all as specified and directed.
Removing excavated material not exc 50 mtr and depositing where directed at a level not exc 1.5m above the starting point complete all as specified and directed.
M & L Sub class 'B' old size well burnt brick laid flat in trenches as protection to LT cable complete all as specified and as directed.
Supply and fixing GI tubing light grade under road, on pole floor and on wall for cable protection complete all as directed for following sizes 50mm bore complete all as specified and directed
Supply, laying, testing & commissioning XLPE insulated PVC inner sheathed, armoured with galvanized steel strip or wire heavy duty underground cable with stranded aluminum conductor 1100 volt grade of size 120 Sqmm 3.5 Core laid in trenches / duct passing through pipe / duct or fixed on pole and connecting and testing complete all as specified and directed including taking down old unserviceable XLPE cable with brick protection and complete all as specified and as directed.
All as per Item No.179 above but size of XLPE cables 95 Sqmm 3.5 Core complete all as specified and directed
All as per Item No.179 above but size of XLPE cables 70 Sqmm 3.5 Core complete all as specified and directed
All as per Item No.179 above but size of XLPE cables 50 Sqmm 3.5 Core complete all as specified and directed
All as per Item No.179 above but size of XLPE cables 25 Sqmm 4 Core complete all as specified and directed
Supply and laying or fixing or passing through pipe, 16 sqmm 2 core 1100 volts grade heavy duty cable with PVC insulated stranded aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed in service connections all as specified and directed.
Dismantling of unserviceable steel poles complete all as specified and directed
S&F Steel tubular swaged pole complete with cast iron base plate, finial taper plug, bolts, nuts and screws of type 410 SP-31 (9 metre long) complete all as specified and directed.
Material and Labour for PCC, type C1, (1:3:6) using 20mm graded stone aggregate) as in coping of poles including formwork complete all as specified and as directed including demolition of old damaged concrete from pole.
Material and Labour for PCC, type D2, (1:4:8), using 40mm graded stone aggregate) as in PCC/Road cutting /installation area and foundation of pole etc complete all as specified and as directed.
S&F MCCB, 250 Amps, 4P, 36 kA, 415 Volts, with thermal and magnetic release complete including taking down old unserviceable MCCB complete all as specified and as directed.
S&F MCCB, 400 Amps, 4P, 36 kA, 415 Volts, with electronic thermal release & electronic magnetic release complete including taking down old unserviceable MCCB complete all as specified and as directed.
Material and Labour Earthing with galvanized steel earth plate electrode of size 600 mm x 600 mm x 6.00 mm buried directly in ground connected to galvanized earth lead strip of size 32 mm x 6 mm by means of bolts, nuts, check nuts and washers of galvanized iron or steel including 40mm dia medium grade GI tubing for protection of earth lead, MS sheet metal funnel with wire mesh, watering pipe light grade 20mm dia, charcoal or coke and common salt in alternative layer of 15 Cm compacted thickness all around the electrode with concrete earth pit of PCC type C1 (1:3:6, using 20mm graded stone aggregate) 50mm thick precast RCC type B1, (1:2:4, using 20mm graded stone aggregate) pit cover reinforced with 8mm dia deformed bar and suitable handle made of 10mm dia round bar including galvanised strip of size 32mm x 6mm for extension of earth lead and necessary excavation, earth work, in soft/loose soil and disposal of spoils to a distance n.exc 50m and necessary connection and testing complete all as shown in electrical plate No 3 of SSR Part-I, 2009 and all as specified and directed including taking down old unserviceable earth pit.
S & F round shape 6 watt 220 volts AC recessed type high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor of suitable size complete including taking down old unserviceable one.
S & F round shape 12 watt 220 volts AC recessed type high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor of suitable size complete including taking down old unserviceable one.
S & F round shape 15 watt 220 volts AC recessed type high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor of suitable size complete including taking down old unserviceable one.
Supply and fix in repairs LED post top lantern suitable for 1 X 20 Watt 230 volts AC Outdoor type with decorative post top for 360 degree indirect light IP65 protection with impact and corrosion resistant complete with driver and lamp including all accessories and taking down old unserviceable one.
S&F 3 watt warm colour LED photo frame spotlight with complete connections including taking down old unserviceable one.
S&F warm colour LED strip light 20 metres length with complete connections including taking down old unserviceable one.
S&F in repairs table lamp hanging type dome shaped pendant with lamp complete with all accessories including necessary connection and taking down old unserviceable one.
S&F in repair integral decorative LED bollard 9 watt with lamp and all accessories including taking down old unserviceable one Make Bajaj Cat Part No BGBOM 650 9W LED or equivalent Philips / CG.
S & F recesss mounted low glare LED luminaire 35/36 Watt 2 x 2 ft 3000 K complete with all accessories including taking down old unserviceable one .
Supply and fixing LED security light 60 watt 230 V AC outdoor type with high pressure die cat aluminium housing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP66 protection complete all as specified and directed
Material and labour for Street light bracket, made out of 40 mm bore GI pipe (medium grade) 1.5m long bend to shape as required and welded and fixing in position including dismantling and taking down old unserviceable bracket complete all as specified and directed.
Material and labour for Street light bracket, made out of 25 mm bore GI pipe, (medium grade) 1.5m long bend to shape as required and welded and fixing in position including dismantling and taking down old unserviceable bracket complete all as specified and directed.
Supply and fix testing and commissioning of LED flood light fitting 100 W new generation energy sqaving and enviromental friendly, long life, versatile pressure die cast aluminium IP 66 PDC floood light aesthetically designed with better thermal management with electronic driver complete all as directed by Engr-in-Charge.
Supply and fix in repairs LED post top lantern suitable for 1 X 40 Watt 230 volts AC Outdoor type with decorative post top for 360 degree indirect light IP65 protection with impact and corrosion resistant complete with driver and lamp including all accessories and taking down old unserviceable one.
S&F in repairs integral decorative LED bollard 8 watt with lamp and all accessories including taking down old unserviceable one.
Supply and fixing factory made IP-65 (Dust and power jet Proof according to IEC 60529) opaque street light junction box of size 240 mm x 130 mmx95mm made of high quality polycarbonate (shock proof, rust free, corrosion free acid and chemical resistant, fire retardant having high impact (IK 08) totally insulated made of halogen and silica free recyclable material, UV resistant having high grade gasket made of polyurethane with copper terminal , MCB SP 6 Amps rating 10 KA with locking arrangement and 2 Nos M40 size cable gland and one M32 size gland suitable up to 35 Sqmm cable etc complete all as specified and directed. Make : HENSEL Cat No K-8350 or equivalent in Sintex .
Ms Amrik Singh Bahra
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .