Civil works

Dismantling brick masonry in cement mortar and removing the debris away from the site as directed by the engineers at site.

Dismantling reinforced cement concrete and removing the debris away from the site as directed by the engineers at site.

Earthwork excavating and depositing on bank with initial lead of 10m & lift of 2m in Hard stiff clay, stiff black cotton, hard red earth, shales murram gravel stoney earth and earth mixed with small size boulders SS.20B for foundation.

Providing anti termite treatement in 4 stages (i) immediately after earthwork excavation and before laying foundation concrete (ii) after refilling for sides of foundation (iii) Before laying of flooring concrete and outside of basement upto 1m alround the building using termite 250ml for 5 litres of water.

Refilling with excavated soil complying with standard specification for filling in foundation and basement, including cost of labour and tools, lead, lift, etc., complete.

Filling with sand in foundation and basement with well watering and consolidation as per standard specification etc, including cost of M.sand, labour, lead, lift etc Complete

Filling with well gravel in basement with well watering and consolidation as per standard specification etc, including cost of M.sand, labour, lead, lift etc Complete

Providing PCC 1:4:8 using 40mm HBG metal including cost of all materials, lead, lift, labour, curing etc., complete.

R.R.Masonry in CM 1:6 using rough stone including cost of all materials, labour, lead, lift, curing etc., complete. For Foundstion and basement

Brickwork in CM 1:5 mix using IInd class chamber burnt brick of size 9"x 4⅜"x 2¾" including cost of materials labour lead lift curing etc complete.

RCC 1:1 1/2 :3 mix using 12 to 20 mm HBG metal for with centering, shuttering, strutting, formwork, lead, lift, labour, curing, etc., complete. But excluding cost of steel - Grade Beam.

RCC 1:1 1/2 :3 mix using 12 to 20 mm HBG metal for with centering, shuttering, strutting, formwork, lead, lift, labour, curing, etc., complete. But excluding cost of steel - Plinth Beam.

RCC 1:1 1/2 :3 mix using 12 to 20 mm HBG metal for with centering, shuttering, strutting, formwork, lead, lift, labour, curing, etc., complete but excluding cost of steel for Lintel .

RCC 1:1 1/2 :3 mix using 12 to 20 mm HBG metal for with centering, shuttering, strutting, formwork, lead, lift, labour, curing, etc., complete. But excluding cost of steel for Sunshade.

RCC 1:1 1/2 :3 mix using 12 to 20 mm HBG metal for with centering, shuttering, strutting, formwork, lead, lift, labour, curing, etc., complete. But excluding cost of steel for Roof slab.

RCC 1:1 1/2 :3 mix using 12 to 20 mm HBG metal for with centering, shuttering, strutting, formwork, lead, lift, labour, curing, etc., complete. But excluding cost of steel for Pre-Cast Slab.

RCC 1:1 1/2 :3 mix using 12 to 20 mm HBG metal for with centering, shuttering, strutting, formwork, lead, lift, labour, curing, etc., complete. But excluding cost of steel for Roof Beam.

RCC 1:1 1/2 :3 mix using 12 to 20 mm HBG metal for with centering, shuttering, strutting, formwork, lead, lift, labour, curing, etc., complete. But excluding cost of steel for Column upto GL.

RCC 1:1 1/2 :3 mix using 12 to 20 mm HBG metal for with centering, shuttering, strutting, formwork, lead, lift, labour, curing, etc., complete. But excluding cost of steel for Column above GL.

Supplying, fabricating and placing in position Mild Steel / Ribbed Tor Steel grills for all RCC works as per design given including cost of steel and G.I. binding wire in all floors etc. complete complying with standard specification.

Plastering the wall with cement mortar 1:5 ,12mm thick including cost of materials, labours, lead, lift, curing, etc. complete.

Ceiling Plastering with cement mortar 1:3, 12mm thick including cost of materials, labours, lead, lift, curing, etc. complete.

Supplying and fabricating , fixing of steel door Single leaf with outer frame 40 x 40 x 6mm M.S. Angle for door frame and shutter with 35 x 35 x 5mm MS angle with 32 x 6mm cross ties on front and covered with 18 gauge MS Sheet with 25 x 3mm MS flat alround on backside including cost of all matrials fittings locking arrangements one coat of red oxide etc.complete.

Supplying and fabricating, fixing of steel Window using 35 x35 x5mm for Outer frame and 30 x30 x4 mmM.S angle for shutter frame M.S rod 12 mm dia ,4mm thick plain pin head glass including cost of all materials, labour, lead, lift etc complete.

Supplying and fixing anodised aluminium Ventilators of size 50cmx45cm louver type asper standard specification with approved section for frame and glass 4mm thick including cost of all materials, labour, lead, lift etc complete.

Supplying and fixing of PVC door shutter made of chamber solid plastic sections of size 200 mm x 20mm thick and PVC extracted shutter frame of sie 24 mm x 50mm including necessary hard make PVC shutters including cost of anodised aluminium fittings as per drawing and specification including cost of mateials lead , liftetc complete.

Weathering coarse with one coarse of Hydraulic pressed tiles of 230x230x20 mm size approved and branded quality for roof slab to set in cement mortar 1:3 and mixed with crude oil 5% by weight of cement and pointing the tiles with same oiled mortar and over a bed of brick jelly 20mm size and mixed with lime 32:12.5 mix for an avarage 80 mm thick including cost of materials labour leads etc. complete as per standard specification.

Flooring with Joint free rectified glazed Ceramic Tiles of size 305 x 305 x 6 mm or higher size laid over 20 mm thick cement mortar 1:3 (One Cement and Three Sand) base mortar over the existing slab / floor including cutting the tiles to the required size with special cutter wherever necessary, laying in position and pointing with white cement mixed with colouring pigment at the rate of 0.3 Kg. / sq.m. etc., complete complying with standard specification. .

Dadooing with glazed tiles of size 300 x 200 x 6mm or higher size set in cement mortar 1:2, 10mm thick including cost of materials, lead,Lift, labours for laying fixing and finishing neatly as per standard specification and as directed by the Engineer-in-charge.

White washing two coats with freshly burnt white shell lime in all floors including cost of lime, blue powder fevicol type gum, brushes, scaffolding charges, etc., complete complying with standard specification and as directed by the departmental officers.

Painting two coats for the newly plastered inner wall surface with ready mixed plastic Interior emulsion paint of first class quality and of approved colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification.

Painting two coats for the newly plastered outer wall surface with ready mixed plastic Exterior emulsion paint of first class quality and of approved colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification.

Supplying and fixing in positon Indian Water Closet (Oriya type) of size 580 x 440mm white glazed earthern ware of approved quality and brand with "P" or "S" trap conforming to BIS with sand cushion and forming flooring alround the closet using 40mm broken brick jelly in lime concrete 1:2:5 (One lime, Two sand and Five brick jelly) 100mm thick and finishing the top to the required slope and including giving necessary connection to PVC pipes (including the cost of 110mm dia PVC pipe for a length of 600mm) by dismantling brick masonry wall / reinforced c

Wiring with 2x 1.50sqmm PVC insulated unsheathed SC Cu. Conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories with T.W switch box and 5A F.T switch with continuous earth wire connection in flush with wall with 3mm thick hylam sheet for marking good of the concealed portion with suitable colour for PVC concealed light points and fan points.

Wiring with 2x 1.5sqmm PVC unsheathed SC Cu. Conductor of 1100V grade in suitable heavy gauge PVC conduit pipe in wall and ceiling with PVC accessories inflush with wall with 150mm x100mm x75mm PVC switch box 3mm thick hylam sheet for 5Amp 3 pin non interlocking C.S plug with continous earthwire connection and making good of the concealed portion with suitable colour for plug points.

Wiring with 2x 4sqmm PVC insulated SC unsheathed Cu. Conductor cable of 1100V grade in suitable heavy gauge PVC conduit pipe concealed in wall and ceiling with PVC accessories in flush with wall with 150mm x100mm x75mm PVC switch box concealed type with 3mm thick hylam sheet cover for 15Amp 3 pin flush type non interlocking C.S plug with one SP MCB 25A andcontinous earthwire connectionC wire and good of the concealed portion with suitable colour for power plug points (eachone from main DB to switch board)

Supply and fixing of single box type 18W / 20W LED tube light (higher end) fitting with TW round blocks on wall or ceiling with PVC unsheathed copper leads from terminals to the fitting.

Supplying and fixing of 4 W LED bulb with bulb holder including cost of materials labour etc complete.

Supplying and fixing of 1200 mm sweep 48" AC ceiling fan with stepped electronic 300 w regulator with 1m down rod on the existing clamps of approved quality as directed by the engineer incharge including cost of materials lead lift etc complete.

Earthing as per PWD standard with an earth electrode of 2m Class B GI pipe of dia not less than 32mm with necessary masonry works including cost of materials lead lift etc complete.

Supplying and fixing in position of gun metal Gate valve approved make of best quality including cost of materials lead lift labour etc complete - 32mm dia.

Supplying and fixing in position of 15 mm dia Brass chromium plated Screw down tap of ISI make approved quality including cost of material, labour, transport charge, etc., complete.

Supplying and fixing in position of PVC pipe 10kg/sqmm of approved ISI make including cutting threading joining with necessary PVC specials including cost of materials lead lift labour etc complete - 32mm PVC pipe ISI make 10 Kg / cm2.

Supplying and fixing in position of PVC pipe 10kg/sqmm of approved ISI make including cutting threading joining with necessary PVC specials including cost of materials lead lift labour etc complete - 25mm PVC .pipe ISI make 10 Kg / cm2.

Supplying and fixing 100x75mm PVC floor trap with one PVC door bend , shoe of 50mm dia including cost of materials lead lift etc complete.

Supplying, jointing and fixing in position of 110 mm (FINOLEX (or) EQUIVALENT WITH ISI SONOGRAM) (6kg /cm2) PVC pipe for sewage line inclusive of specials, bend, with inspection door, wherever necessary T.W. plugs including cost of all lead, lift, labour charges etc., complet and as directed by the Engineer at site.

Painting two coats with ready mixed enamel paint for the new steel surface with primer including cost of all materials, scaffolding charges, labour, lead lift curing etc. complete