Repair to 50000 GPH x 158 meter head HC pump set of unit no. 5 at pumping station Salmay stage-1st and repair to 120000 GPH x 48 meter head HC pump set at pumping station Salmay stage-0 (Old).

Amount

Repair to 50000 GPH x 158 meter head HC pump set of unit no. 5 installed at pumping station Salmay Stage-1st. The job involves disconnecting incoming main power, decoupling of pump from motor, unfastening pump from base frame, suction and delivery, fitting blind flange on open delivery side and subsequently shifting the pump to workshop. Dismantling the pumping unit and extraction of internal parts followed by providing and fitting of new SS shaft as per sample, turning and finishing the main shaft to the original bearing size. Providing / fabrication and fitting of new impellers-2nos. neck rings-5nos., spacer bush-4nos., protection sleeve 2 nos., gland bush-2no., chuck nuts-2nos. and diffuser bushes 02 nos. The job also involves repairing of impellers 03 nos., and diffusers 04 nos. Providing and fitting of new bearing housing assembly at non driving end alongwith new bearings 410-1no and 6410-1no. at NDE / DE, in lieu of damaged bearings. Providing and fitting of bearing bracket at NDE and DE-1no. each as per sample. Fitment of pump on base frame and coupling of pump with the motor after making proper leveling and alignment. Making electrical connections and testing the pump and motor on no and on full load. Complete job includes cost of material, labour charges, hire charges of tools and tackles etc. Rebate, if any, should be quoted separately.

Repair to 120000 GPH x 48 meter head HC pump set installed at pumping station Salmay Stage-0 (Old). The job involves disconnecting incoming main power, decoupling of pump from motor, unfastening pump from base frame, suction and delivery, fitting blind flange on open delivery side and subsequently shifting the pump to workshop. Turning and finishing the main shaft to the original bearing size. Providing / fabrication and fitting of new impellers-1no. neck rings-1no., spacer bush-1no., protection sleeve 2 nos., gland bush-2no., chuck nuts-1no. and diffuser bushes 01 no. Providing and fitting of new bearing housing assembly as per sample at NDE / DE. Providing and fitting of new bearings at DE / NDE side as per sample. Fitment of pump on base frame and coupling of pump with the motor after making proper leveling and alignment. Making electrical connections and testing the pump and motor on no and on full load. Complete job includes cost of material, labour charges, hire charges of tools and tackles etc. Rebate, if any, should be quoted separately.

M/s BHARAT TRADE CORPORATION (BID ID -2320787)

AMIT SALES CORPORATION (BID ID -2320804)