Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹5.4 CrAccepted-AOC | ₹5.4 Cr | L1 | Accepted-AOC Work awarded to the Contractor |
| 2 | L2₹5.8 Cr+₹49.8 L (9.31%)Rejected-Finance R O VPO DAULATPUR CHOWK TEHSIL GHANARI DISTRICT UNA HP | UNA | HIMACHAL PRADESH | 174301 | ₹5.8 Cr+₹49.8 L (9.31%) | L2 | Rejected-Finance Being a 2nd lowest |
Tender Value
₹5.9 Cr
EMD Value
₹11.8 L
Closing Date
30 Jan 2023, 5:00 pmClosed
Executive Engineer Chamba Division HPPWD Chamba
Executive Engineer Chamba Division HPPWD Chamba
Construction of Baily Bridge over Sal Nallah at Baloo on Baloo to Pucca Tala road Construction 30 metre span RCC Box Girder Bridge at Rd.0/057 including both side approaches
2023_PWD_67333_1
No.PWC-WA-II/Contt/22-23- 16047-16146 dt 17.1.23
Open Tender
Civil Works - Bridges
Item Rate
540 days
Chamba
Please refer Tender documents.
15 documents required · 15 mandatory
₹5,000
₹11.8 L
17 Feb 2023
21 Jan 2023
31 Jan 2023
21 Jan 2023
30 Jan 2023
21 Jan 2023
Amount
Earth work in excavation for all type of structure (bridge work) in all type of classification of soil, comprising of ordinary soil, ordinary rock , hard rock, chiseling / wedging out rocks (where blasting is prohibited) as per drawings and MORTH technical specification section 300 and as per the directions of the Engineer-in-Charge including setting out, construction of shoring and bracing, removal of stumps and other deleterious materials and disposal of materials upto all lead and lift including dressing of sides and bottom and back filling in trenches with excavated suitable approved material including shoring and strutting and pumping and bailing out water (surface and sub soil water) upto any depth and any quantum of water including cleaning of slush which may arise out during dewatering as per directions of Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals. The rate is including the octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.
Earth work in excavation for all type of road structure such as retaining walls, breast walls, culverts, drains and parapets etcetera in all type of classification of soil, comprising of ordinary soil, ordinary rock , hard rock chiseling / wedging out rocks (where blasting is prohibited) as per drawings and MORD technical specification section 300, 1600 and as per the directions of the Engineer-in-Charge including setting out, shoring and bracing, removal of stumps and other deleterious materials and disposal of materials upto any lead and lift including dressing of sides and bottom and back filling in trenches with excavated suitable / approved materials to the original surface in layers not exceeding 150mm (one hundred fifty millimeters) compacted thickness including shoring and strutting and pumping and bailing out water (surface and sub soil water) upto any depth and any quantum of water including cleaning of slush which may arise out during dewatering as per directions of Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals. The rate is including the octroi, royality, Malkana, toll tax, sales tax, GST or any other taxes imposed by the Government.
Providing and laying Mechanically mixed and vibrated concrete for plain cement concrete 1:3:6 ( one cement is to three sand is to six graded crushed stone aggregate 40 millimetre (forty millimetre) nominal size on ground in or under water and curing complete for 14 (fourteen) days, in open foundations for all type of structures including pumping or bailing out water (surface and sub soil water) dewatering for all depths and any quantum of water including removal of slush which may arise at the time of laying concrete complete for all heights / depths including the cost of form work complete as per drawings and MORTH. technical specification section 1500, 1700, 2100 or as directed by the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is including the octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.
Providing and laying mechanically mixed and vibrated reinforced cement concrete design mix to obtain minimum compressive strength of grade M-30 (M- thirty) using cement contents not less than 407 Kg. (Four hundred seven kilogram per cubic metre in sub structure and curing complete including the cost of form work but excluding the cost of reinforcement for reinforced concrete work in Abutment, Bed block, Dirt wall etctera complete in all heights/depths as per drawing and MORTH technical specifications, section 1500,1700,2200 or as directed by the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is including the octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Goveas directed by the Engineer-in-Charge.
Providing and laying Mechanically mixed and vibrated concrete for plain / reinforced concrete in sub-structure for all type of structure complete of plain cement concrete grade M-15 ( M-fifteen) designed mix with cement contents not less than 275 Kg ( Two hundred seventy five kilogram) per cubic metre with crushed stone aggregate 40 mm (Forty millimetre) nominal size on ground or under water and curing complete for 14 ( fourteen) days including pumping or bailing out water, dewatering removal of slush as required at site which may arise at the time of laying concrete complete for all heights/ depths including the cost of form work in all type of structure filling in Toe bracket and abutment etcetra aas per drawings and MORTH technical specification section 1500, 1700, and 2200 and as directed by the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is including octroi, royality , Malkana toll tax GST or any other taxes imposed by the Government.
Back filling with granular material behind abutments, return walls, wing walls and retaining walls etc. complete as per MORTH technical specification clause 710.1.4 of IRC 78 and section 2200 or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is including the octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.
Supplying fitting and placing HYSD bar reinforcement (Fe-415) in substructure complete as per drawing and MORTH technical specifications section 1600 and 2200 including cutting, bending,straightening binding and placing in position complete in all respect including cost of binding wire upto all heights and depths including carriage of materials within all leads and lifts and other incidental or as directed by the Engineer in Chrage. The rate is including the octroi, royality, Malkana, toll tax, sales tax, GST or any other taxes imposed by the Government.
Supplying fitting and placing HYSD bar on reinforcement in super-structure complete as per drawing and MORTH technical specifications section 1600 and 2300 including cutting, bending, binding and placing in position complete in all respect including cost of binding wire or as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidental. The rate is including the octroi, royality, Malkana, toll tax, sales tax, GST or any other taxes imposed by the Government.
Providing 100mm (One Hundred millimeter) diameter AC pipe Weep holes in brick masonry/stone masonry, plain/reinforced concrete abutments, wing walls return walls and retaining /breast walls etcetera extending through the full width of the structure with slope of 1 (V):20 (H) (one vertical is to twenty horizontal ) towards drawing face complete as per drawings and MORTH technical specifications section 2700 or as directed by the Engineer-in-Charge ,including carriage of materials within all leads, lifts and other incidental. The rate is including the octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.
Providing and laying mechanically mixed and vibrated reinforced cement concrete design mix in super structure to obtain minimum compressive strength of grade M-30 (M- thirty) using cement contents not less than of 407 Kg. ( Four hundred seven kilogram) per cubic metre with 20 mm ( twenty millimetre) nominal size graded crushed stone aggregate and curing complete in approach slab including the cost of form work and reinforcement complete as per drawing and MORTH technical specification section 1500, 1600 , 1700 and 2700 and as per the directions of Engineer-in-Charge including carriage of materials within all leads and lifts and other incidentals.The rate including the octroi, royality, Malkana, toll tax, or any other taxes imposed by the Govt.
Furnishing and placing Mechanically mixed and vibrated reinforced cement concrete M-30 (M-thirty) design mix using cement content not less than 407 Kg ( four hundred seven kilogram) per cubic metre with graded /crushed stone aggregate 20mm (twenty millimetre) nominal size and curing complete including cost of form work in Deck slab and wheel guard etcetera as per the directions of Engineer-in-Charge but excluding the cost of reinforcement for reinforced concrete work as per drawing and Morth specification section 1600,1700 and 2300 including carriage of material withn all leads, lift and other incidentals. The rate is including the octroi, royalty, Malkana, toll tax, sales tax or any other taxes imposed by the Government.
Providing and fixing drainage spouts complete with 100mm (one hundred millimetre) dia galvanised mild steel down pipe corrosion resistant structural steel grating complete as per drawing and MORTH technical specification section 2700 including hauling of materials within in all leads, lifts and other incidental as per the entire satisfaction and directions of Engineer-in-Charge. The rate is including the octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.
Construction of reinforced cement concrete mechanically mixed and vibrated, pre-cast R.C.C. railing of M-30 grade ( M-Thirty) design mix with cement contents not less than 407 kg. (four hundred seven kilogram) per cubic metre with graded crushed stone aggregate size not exceeding 12mm (twelve millimetre) nominal size and curing complete, true to line and grade, tollerance of vertical R.C.C. post not to exceed 1 in 500 (one in five hundred) centre to centre spacing between vertical post not to exceed 2000mm (two thousand millimetre) leaving adequate space between vertical post for expansion including the cost of reinforcement and form work as per drawing and MORTH technical specifications section 1500,1600,1700, and 2700 complete as per approved drawing and technical specifications and as per the direction of Engineer-in-charge including carriage of materials within all leads, lifts and other incidental.The rate is including the octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.
Providing and laying Mechanically mixed and vibrated reinforced cement concrete wearing coat of grade M-30 (M-Thirty) design mix with cement contents not less than 407 kg. (four hundred seven kilogram) per cubic metre with 20mm (twenty millimetre) nominal size graded crushed stone aggregate including reinforcement, curing and form work complete as per drawing and MORTH technical specification section 1500, 1600,1700 and 2700 as per the directions of Engineer-in-Charge including carriage of materials within all leads,lifts and other incidental. The rate is including the octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.
Providing and laying a buried expansion joint, covered with 12 mm (twelve millimetre) thick, expansion gap being 20mm (Twenty millimetre) 200mm (two hundred millimetre) wide galvanised weldable structural steel plate as per IS:2062, placed symmetrical to centre line of the joint, resting freely over the top surface of the deck concrete, welding of 8 mm (eight millimetre) dia, 100mm (one hundred millimetre) long galvanised nails spaced 300mm (Three hundred millimetre) centre to centre along the centre line of the plate all as specified as per MORTH technical specifications section 2600 and as per direction of Engineer-in-charge including carriage of materials with in all leads, lift upto all leads and lifts and other incidental. The rate is including the octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.
Providing and filling joint sealing compound as per drawing and MORTH technical specifications section 2600 with coarse sand and 6% (six percent) bitumen by weight complete in all respect as per drawings, design and the direction of Engineer-in-charge including carriage of materials within all leads and lifts and other incidental. The rate is including the octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.
Supplying, fitting and fixing in position true to line and level cast steel rocker bearing confirming to IRC : 83 (eighty three) (Pt-1) section IX and section 2000 of MORTH specification complete including all accessories as per drawing and technical specification including hauling of materials within all leads, lifts and other incidental as per the entire satisfaction and directions of Engineer-in-Charge. The rate is including the octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.
Supplying, fitting and fixing in position true to line and level forged steel roller bearing confirming to IRC : 83 (eighty three) (Pt-1) section IX and section 2100 of MORTH specification complete including all accessories as per drawing and technical specification including hauling of materials within all leads, lifts and other incidental as per the entire satisfaction and directions of Engineer-in-Charge. The rate is including the octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.
Providing and laying mechanically mixed and vibrated concrete for plain cement concrete nominal mix 1:4:8 ( one cement is to four sand is to eight graded crushed stone aggregate 40 millimetre ( forty millimetre) nominal size) in or under water and curing complete for minimum fourteen days , in retaining walls, breast walls, for all type of structures including pumping or bailing out water ( surface and sub soil water) dewatering upto all depths and any quantum of water including removal of slush which may arise at the time of laying concrete complete for all heights / depths including the cost of form work complete as per drawing and MORD technical specification section 800,900, 12000and 1600 as per directions of Engineer-in-Charge including carriage of material within all leads ,lifts and other incidentals.The rate is including the octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Govt.
Back filling with granular material behind , return walls, wing walls and retaining walls etc. complete as per drawings and MORD technical specification section 1200 and section 1600 or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royalty ,Malkana, toll tax, or any other taxes imposed by the Government.
Providing 100mm (one Hundred millimetre) diameter PVC pipe Weep holes in brick masonry/stone masonry, plain/reinforced concrete abutments, wing walls return walls and retaining /breast walls etcetera extending through the full width of the structure with slope of 1 (V) : 20 (H) (one vertical is to twenty horizontal ) towards draining complete as per drawings and MORD technical specifications section 700 and 1200 or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality ,Malkana, toll tax, GST or any other taxes imposed by the Government .
Construction of embankment with approved materials deposited at site from roadway cutting and excavation from drains and foundation of all other structure, graded and compacted to meet requirement, including setting out, true to the lines, grades, width and side slopes in accordance with drawings, including spreading the embankment material with motor-Graderin successive layers of 200 mm ( two hundred millimetre) uniform thickness, and compacting with vibratory roller 8-10 ( eight to ten) tonne static weight to meet the requirements of table 300.1 & 300.2 as per MORD technical specification section 300,1600 and as per the entire with approved materials deposited at site from road way cutting and excavation from drain and foundation of all other structure graded and compected to meet requirement of table 300.1 and 300.2 as per MORD technical speficiations section 300 & 1600 and as per the entire satisfaction and direction of Engineer-in-charge including carriage of materials within all leads and lifts and other incidential . The rate is including the octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.
Om Parkash Sharma And Sons
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .