Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹40.4 LAccepted-AOC VILLAGE TAPARIYAN BABINA CANTT BABINA JHANSI UP 284401 | BABINA | JHANSI | UP | 284401 | L1 | Accepted-AOC Being a L1 bidder | |
| 2 | L2₹45.4 L+₹3.6 L (8.55%)Rejected-Finance 0 SANRPUR MISHRAULIYA PUCHPEDIYA ROAD SANTPUR MISHRAULIYA BASTI UTTAR PRADESH 272001 INDIA | BASTI | UTTAR PRADESH | 272001 | L2 | Rejected-Finance Other than
lowest
bidder | |
| 3 | L3₹47.7 L+₹6.0 L (14.2%)Rejected-Finance 704 NEW PUMP HOUSE NEAR RED ROSE SCHOOL BABINA JHANSI UP 284401 | BABINA | JHANSI | UP | 284401 | L3 | Rejected-Finance Other than
lowest
bidder | |
| 4 | Rejected-Technical TAPARIYAN BEHIND MAHARISHI SCHOOL BABINA BABINA RURAL JHANSI UP 284401 | BABINA | JHANSI | UP | 284401 | - | Rejected-Technical Rejected due to not having appropriate category as per NIT i.e. b (i). |
Tender Value
₹48.2 L
EMD Value
₹96,500
Closing Date
9 Mar 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE BABINA
GE BABINA CANTT BABINA 284401
PROVN OF CERTAIN SRW AND REVENUE WORK UNDER AGE B/R-II AND AGE E/M UNDER GE BABINA CANTT
2024_MES_641396_1
8201/E8
Open Tender
Civil Works
Item Rate
180 days
GE BABINA
AS PER TENDER DOCUMENTS
8 documents required · 8 mandatory
₹500
GE BABINA
₹96,500
Yes
13 Apr 2024
8 Feb 2024
11 Mar 2024
8 Feb 2024
9 Mar 2024
23 Feb 2024
Amount
Dismantling of Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified and as directed.
S & F Pre- painted galvalume aluminum zink coating GI based corrugated steel 0.50mm thick and AZ- 150 of an colour having tensile strength of 550mpa as in roof covering/cladeding to wall, fixed with self tapping screw complete all as specified and directed.
S & F Pre- painted galvalume aluminum zink coating GI based plain steel 0.50mm thick and AZ- 150 of an colour having tensile strength of 550mpa as in roof covering/cladeding to wall, fixed with self tapping screw complete all as specified and directed.
Dismantling timber scantling unframed work 40 sq. cm and over in section in any position complete all as specified and as directed.
S&F Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc.Fe-290 Gde E-165 complete all as specified and as directed.
M&L mild steel work in hand rails, half round or other steel section or core for Wind ties for roof including securing bolts, post and struts cutting tops to shape as directed, drilling holes, notching for wire etc and similar work confirming to Fe-290 Gde E-165 complete all as specified and as directed.
M&L for preparation of new steel surfaces and applying two coats of synthetic enamel paint over a coat of red oxide primer, over 10cm in width or girth,not otherwise described complete all as specified and as directed.
Dismantling wall and ceiling boards (fibre, pump, insulation etc,) or insulation boards of any thickness including cover fillets complete all as specified and as directed.
M&L for aluminium anodised snap grid frame work of the following (a) Main Tee section 36.5x25x1.4mm size (wt not less than 0.24Kg/RM) (b) Section alongwith wall angle of size 40x25x2mm size (wt not less than 0.36Kg/RM) (c) Cross Tee section 23.5x26.4x1.4mm size (wt not less than 0.191Kg/RM) (d) Snap grid shall be fixed to G.I Flat 40 x 3mm supporting hangers consisting of 4mm dia G.I rod n.exc 1.20m length with J bolts nuts and washer etc as per manufacture instructions & complete all as directed.
M&L for 4mm thick high pressure steam cured non asbestos fiber cement design board of size 600mm x 600mm fixing in ceiling complete all as specified and diredted. Note :- (i) Aluminium snap grid, and false ceiling board material shall be verified by GE before incorporation in the work. (ii) Paid Vr. shall be verified of genuineness. The payment will be released after complying of above points.
Demolition of Brickwork of stone/boulder masonry, build in cement mortar including all quoins, arches, pillars etc, but excluding ashlars facings, dressed stonework and precast concrete articlesl etc complete all as specified and as directed.
M&L brick work with fly ash bricks (FASB) conferming to IS 12894, of strength M-10 straight or curved on plan exc 6m mean radious built cement mortar 1:6 complete all as specified and as directed.
M&L for PCC 1:2:4 type B-0 using 12.5mm graded stone aggregate as in copping or roof kerbs on roof chamfered on edge including troweling slightly complete all as specified and as directed.
Taking down cement plaster on brick or stone walls etc incl racking out joints hacking for key and scrabbing down with water etc complete all as specified and as directed.
M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces CM 1:4, and finishing the surface even and smooth without using extra cement complete all as specified and directed.
M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces CM 1:6, and finishing the surface even and smooth without using extra cement complete all as specified and directed.
M&L for rendering 15mm thick on other than fair faces of brick work or concrete surfaces CM 1:4, and finishing the surface even and smooth without using extra cement complete all as specified and directed.
Demolition of cement concrete (unreinforced) in ground floor or pavings n.exc 15cm thickness (below or above ground floor) complete all as specified at site complete all as specified and as directed.
M&L for cement concrete 1:3:6 type C1 ,using 20 mm graded crushed stone aggregates as in plinth protection/path laid in alternate panel , joint filled with bitumen 85/25 , surface finished even and fair complete all as specified and as directed. Note : The cost of materials for forming and filling joints deemed to be included in the unit rate quoted by the tenderer.
Dismantling floor hearth wall tiling including cement mortar bedding but not backing removing serviceable meterial to store complete all as specified and as directed.
M&L for coloured ceramic tiles 7 to 8 mm thick (square / rectengular) area of each tile exceeding 0.18 sqm but not exc 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match to floor, over and including 15mm thick screed bed or bedding layer in cementy mortar 1:6 etc complete all as specified and as directed.
M&L for coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tiles exceeding 0.18 sqm but not exceeding 0.38 sqm in skirting/dado etc. set and jointed in neat cement slurry and pointed in colour cement to match to floor, over and incl 10mm thick rendering on wall or conc surfaces in cement mortar 1:4 ,complete all as specified and as directed.
M&L for Second class hard-wood (SAL wood) in scantlings, wrought timber frame and fixed in position (As a truss member or in Rafter in roofing work) etc copmlet as directed.
Dismantling of stone slab and tiles of any description or thickness laid bedded and pointed in any mortar in floor, aprons etc complete all as specified and directed.
M&L for applying two coat of cement base paint over a coat of primer including preparation on new plaster surfaces of external surface complete all as specified and as directed.
M&L for 40mm thick 1:2:4 cement concrete type B-0, (using 12.5mm graded aggregate) as in floor finished and surface finish even with using extra cement all as directed and specified.
M&L for Glass dividing strips, 3 mm thick, 28mm width and inserted in position, conform to design as in floor all as directed and specified.
M & L for complete remoal of existing treatment from old surfaces of wall and appying two coat of white wash including prepration of surface complete all as specified and as directed.
M & L for preparation of new surfaces of wall and appying two coat of white wash complete all as specified and as directed.
M&L for complete removal of existing treament and applying two coat of cement base paint on external surface complete all as specified and as directed.
Dismantling of wrought iron or MS work of any position and description not otherwise complete all as specified and as directed.
S&F for Steel rolling shutters of 1mm thick, with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete by manual type complete all as specified and directed.
S&F Plain sheet glass 3mm thick ordinary quality and glazing with wooden beads or oil putty in square n. exc 0.5 sqm in each pane complete all as specified and as dirrected
M&L preparing of new surfaces and applying three coat of white wash on walls complete all as specified and as directed.
S&F 1000 Ltrs capacity of rotational moulded polyethylen water storage tank (Cylindrical vertical with closed tap) hoisted and fixed in position including S&F 20mm dia GI pipe medium grade washout pipe 450mm long with plug and 20mm dia GI pipe medium grade overflow pipe 600 mm long with fitting etc and including dismantling/demolition of old RCC/PVC tank complete all as specified and as directed by the Engineer-In- Charge.
M&L PCC 1:4:8 type D2 using 40mm graded stone agg as in filling and mass concrete, Sub base/under flooring complete all as specified and directed.
M&L for 40mm thick PCC 1:2:4 type B1 using 20mm graded stone agg as in Sub base/under flooring complete all as specified and directed.
M&L 50mm thick sand filling under concrete interlocking paver block or in foundations including watering and consolidation complete all as specified and directed.
M&L 80 mm thickness M-40 Grade , machine pressed precast concrete Inter locking paver blocksany shape & size with grey cement and pigment conf to IS-15658-2006 laid dry over sand cushion complete all as specified and directed.(Sand cushion shall be measured and paid separately)
M&L street light connecting wire with two runs of single core PVC insulated but unsheathed FRLSH cable of 2.5 sqmm with multi stranded copper conductors, 1100 volts grade, IS-694 marked , drawn-through and including rigid steel ERW conduit (stove enameled) 20 mm dia heavy duty and including suitable size fittings/accessories, including the one run of 2.5 sqmm earth continuity conductor of similar type cable complete all as specified and directed. Note :- Two runs of single core of 2.5 sqmm, one run of 2.5 sqmm earth continuity conductors and one run of 20mm dia ERW conduit with accessories shall be measured as one unit run length rate of rigid steel conduit included. NOTE-For item No 40 to 44 the work will be executed through flame proof wiring expert agency or under their guidance
Supply and fixing LED street light fitting 1x70 Watt flame proof, Well Glass fixture for 70Watt, COB type Sunflower design,Certified by CIMFR Dhanbad & PESO Nagpur,recommended for gas/ vapor group of IIA & IIIB, Zone 1 & 2 and IP 65 protection with die cast aluminum housing with heat resistant toughened glass, with LED tube light fixtures driver, holders, connector, pole bracket etc. Complete with all accessories prewired and including connecting up with three core flexible copper conductor cable with suitable size complete all as specified and as directed. Cat no - SSPL/1233 Shyaam Make Note-copper conductor shall be measured and paid separately under respective item of schedule.
S & F and commissioning of Outdoor Flameproof/Weatherproof Electrical Distribution panel Board, IP66, Wall/colume mounted, made of dia cast Aluminium Alloy, inside & outside dark grey shade no. 632 painted and suitable size & capacity of Copper bus bar channel , provn of suitable cable entry both side incl suitable control wiring . Distribution panel Board accommodated to incoming and outgoing the followings :-(a) Incomer -MCB,4P,63 AMP,10KA- 01 Nos (b) Outgoing - MCB,DP,20 AMP,10 KA - 03 Nos Cat no -SSPL/2C/1010 ; Shyaam Make or equivalent make as specified in Appendix 'B' to PS.
S & F Flame proof/Weather proof Rotary Switch 16 Amp, SP On/Off (With Termination Box) complete all as specified and directed. Cat no -SSPL/2C/1010 ; Shyaam make or equivalent make as specified in Appendix 'B' to PS.
Supply and fix Flame proof / Weather proof 4 way junction box 120mm Dia with 4 Way Terminal Strip, 15A complete all as specified and as directed. Cat no - SSPL/RI/114,Shyaam Make or equivalent make as specified in Appendix 'B' to PS.
Supply and fix brass nickle plated double compressor cable glands of size M-32 (40 MM OD) complete all as specified and as directed
Supply and laying 2.5 multistrandad flexible copper cable 1100V Green colour for earth wire complete all as specified and directed.
Taking down existing solar water heating system with complete accessories such as solar panel air tank etc and deposited in mes store complete all as specified and as directed
Supply, Install, Testing and Commissioning of 'Solar Hot Water System' (Flat Plate Collector) based on indirect transfer of heat of capacity 200 LPD with power backup arrangement complete all as specified and as directed
S&F Hot water pipe duly insulated with glass wool and aluminium cladding 15 mm bore complete all as specified and as directed
Supplying and laying of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in wall/trenches complete all as specified of 20mm bore complete all as specified and as directed
Supplying and fixing of ball valve complete all as specified of 20mm bore complete all as specified and as directed
Supply and fix junction box stopping plug to close vaccant port of size 40mm dia complete all as specified and as directed
Taking down carefully unserviceable aluminium point wiring (light, fan, socket or power) complete with fitting such as switches, ceiling roses, lamp holders, sockets, fan regulators, wooden terminal box plastic laminated sheet cover from TW battens including TW batten or drawing from existing conduit removing including TW batten all as specified and as directed by Engr-in-Charge.
Taking down carefully existing wooden board , Main switch, MCB DB boxes with MCBs, sheet metal boxes, cut out, etc of any size any capacity from boards complete all as specified and as directed.
Taking down carefully sub main wiring / service connection twin core from wall / LT pole of any size of Aluminum with wooden batten and or through rigid conduit including GI wire and making good the disturbed surfaces of walls, roofs, floors etc complete all as specified and as directed.
M & L for concealed point wiring for one light point controlled by one switch complete with PVC insulated and unsheathed flame retardant low smoke and halogen ( FRLSH ) cable of 1.5 sqmm (nominal area) with stranded copper conductor single core 1100 volts grade in and including rigid PVC conduit not less than 20 mm dia, clip, with MS terminal boxes (not less than 1.6 mm thick) and painted with one coat of red oxide primer all around and two coats of black bituminous paint from out side and two coat of aluminum paint from in side including common earth dolly with 3 mm thick plastic laminated sheet top cover of approved make and colour including 1.5 sqmm green stranded copper conductor as continuous earth wire with lugs complete including cutting necessary chases on wall / ceiling surfaces for drawing of conduit & cables as required and making good disturbed surfaces of walls with CM 1:3:6 and matching with the existing surfaces including colour washing all as specified and as directed .
Description same as per item No 56 above but one fan point controlled by one switch & regulator.
Description same as per item No 56 above but One 3/5 pin 5 Amp socket outlet point controlled by one switch on same board.
Description same as per item No 56 above but One 3/5 pin 5 Amp socket outlet point controlled by one switch on independent board.
Description all as per item No 56 above but using 2.5 sqmm single core multi stranded copper conductor PVC insulated and unsheathed flame retardant low smoke and halogen ( FRLSH ) cable for 3/6 pin 15 Amp socket outlet controlled by one switch on independent board with 2.5 sqmm green stranded copper conductor as continuous earth wire with lugs complete all as specified and as directed.
S&F switch piano flush button type 5 Amp single pole one way complete all as specified and as directed.
S&F socket outlet 2in1, 3 pin, 5 Amp flush type complete all as specified and as directed.
S&F switch piano flush button type 15 Amp single pole one way complete all as specified and as directed.
S&F socket outlet 2in1, 3 pin, 5 Amp and 15 Amp flush type complete all as specified and as directed.
S&F ceiling rose,surface bakelite 63 x50mm three terminals complete all as specified and as directed.
S & F Sheet metal enclosure double door concealed suitable for distribution board when MCB to be used having 100 Amp rated bus bar SPN DB 8 ways 240 volts complete all as specified and as directed.
S&F MCB single pole and neutral 40/63 Amp 240 V ,10KA , 'C' series, connected with copper lugs complete all as specified and as directed.
Supplying and laying un-reinforced precast concrete cable cover, class LV type 1 flat size 250x150x40mm peak, laid perpendicular to the axis of cable in trenches complete all as specified and as directed.
Supply and lay river bed sand free from sharp materialsa for Sand cushioning for cables 8 cm below the cable and 15 cm above the cable all as specified and directed .
Supply and laying GI pipe 50mm bore "LIGHT GRADE" in trenches, under floors, roads, along poles for protection of cables, including sealing ends complete all as specified and as directed.
Supply and laying GI pipe 40mm bore "LIGHT GRADE" in trenches, under floors, roads, along poles for protection of cables, including sealing ends complete all as specified and as directed.
S&F MCB single pole 6 to 32Amps 240 V,10KA, 'C' series, connected with copper lugs complete all as specified and as directed.
S & F Lamp holder,PVC/Urea type with back plate suitable for batten fittings complete all as specified as directed
S & F delux Fan Regulator electronic rotary, step type 240 Volt 50 Hz, complete all as specified as directed.
S&F LED bldg security/street light fittings1x35W LED 5700K energy saving and envoiremental frendly long life versatile pressure die cast aluminium housing with acrylic cover as diffuser with IP 66 protection and impact resistance of IK 07 luminaire with high power LED as light siurce and electronic driver suitable for pole dia 35mm including 35mm dia light grade tube bracket, bend to shape 1.80m long with two numbers clamp of size 50mmx6mm with nuts, bolts, washers etc including connection with 1.5Sqmm two single core PVC insulated and PVC sheathed cable stranded copper conductor upto ceiling rose and fixing on wall /pole complete as ditrected by Engineer in Charge. Make: Bajaj Cat Part No BRLEP20WLEDWH or equivalent make as specified in Appendix B to particular specification.
S & F 9W/10W LED retrofit lamp B-22 holder base with polycorbonate body and aluminium heat sink complete all as specified as directed. Make C&S Cat No LTHPLEDLAMP7W/B22 or equivalent make as specified in Appndx 'B' to PS .
Supply and fixing in repair 20W LED 6000k Decorative ultra slim linear LED fitting fixture with extruded polycarbonate ,environmental friendly ,energy efficentinterated driver and 22watts lamp fitted including wiring upto and terminal into ceiling rose complete all as specified and directed by Engr-in- Charge.
Removing excavated materials to a distance n.exc 50m and depositing n exc 1.5m above the starting point complete all as specified and as directed.
Supply,laying connecting and testing of cable XLPE insulated,screened,PVC bedded galvanized steel strip or wire armoured electric power cable (heavy duty) 1100 V grade with multi stranded aluminium conductor of size 16 sqmm 4 core as per IS 7092 Pt-I complete all as specified and as directed.
Supply,laying connecting and testing of cable XLPE insulated,screened,PVC bedded galvanized steel strip or wire armoured electric power cable (heavy duty) 1100 V grade with multi stranded aluminium conductor of size 10 sqmm 2 core as per IS 7092 Pt-I complete all as specified and as directed.
Excavation in trenches not exc 1.5m wide and n. exc 1.5m in depth for foundation etc not exc 10 Sqm on plan and not exc 1.5m in depth for laying of poles/cables and getting out in any type soil complete all as specified and as directed.
M&L returning filling in including spreading levelling, watering and well ramming in layers n.exc. 25mm in any type of soil complete all as specified and as directed.
M&L for earthing complete with galvanised steel earth plate electrode of size 600 mm x 600 mm x 6 mm thick weithing not less than 17.5 Kg buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of the plate not less than 1.5 mtr below ground level, connected to galvanized earth lead wire 4.00 mm dia by means of bolts nuts check nuts & washers of galvanized iron or steel , procteded by GI pipe 15 mm bore( light grade) and watering pipe 20 mm bore GI pipe (light grade) and chamber of pcc 1:4:8 type D2 using 40 mm graded stone aggregate and coping shall be in PCC 1:3:6 type C1 using 20mm graded stone agg. 50 mm thick cover of RCC 1:2:4 type B1 using 20 mm graded stone agg. reinforced with 8 mm dia MS tor bar @ 80 mm c/c both ways including excvation and earth work and removal of surplus soil complete all as shown in electrical plate no 3 of SSR PT 1, 2009 with charcoal dust and salt complete and earth lead connected to earthing test point (up to main switches, DBs) complete all as specified & testing on completion. NOTE:- (I) item includes the cost of 7.5 mtr length GI pipe for protection for GI earth wire. (ii) item rates includes the cost of 7.5 mtr earth lead GI earth wire. (iii) PCC pit shall be provided at least 500mm away from the pit and not on the earth pit itself and the extra cost of additional length of watering pipe,bends,elbow etc shall be deemed included in the unit rate.
Surface excavation n. exc 30 cm deep and averaging 15 cm deep and getting out in soft soil complete all as specified and directed.
RAVI TRADERS
M/s Pratham Enterprises
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .