Rajkiya Colony Laplas sthit Awas No.-A-502, Shreni-5 ke dono jeernasheern bathroomon ke pipe line ko badalte hue navinikaran ka karya, tatha awas ke teen shatigrast darwaze badalna avem anya avashyak marammati karya.

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 meters lead. For thickness of tiles 10mm to 25mm.15.23.1.

Treatment of existing masonry using chemical emulsion @one litre per hole,300mm interval including drilling holes at 45 degree and plugging them with cement mortar 1:2 (1 cement : 2 Coarse sand ) to the full depth of the hole with Chlorpyriphos /Lindane E.C 20% with 1% concentration. S.I-2.35.4.1

Taking out doors,window and clerestory window (steel or wood) shutter including stacking within 50 meters lead:of Area 3sqm and below.15.13.1

15 mm thick Cement Plaster 1:3 (1 cement : 3 coarse sand) finished with a floating coatof neat cement on the rough side of single or half brick wall. DSR-13.10.

Providing and fixing Chlorinated polyvinyl chloride (cpvc)pipes having thermal stability for hot & cold water supply,including all CPVC plain & brass threaded fittings and fixing the pipe with clamps at 1.0m spacing.This includes jointing of pipes and fitting with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-charge.Concealed work,including cutting chases and making good the walls etc.,20mm nominal dia pipes.(18.8.2).

Providing and fixing Chlorinated polyvinyl chloride (cpvc)pipes having thermal stability for hot & cold water supply,including all CPVC plain & brass threaded fittings and fixing the pipe with clamps at 1.0m spacing.This includes jointing of pipes and fitting with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-charge.Concealed work,including cutting chases and making good the walls etc.,25mm nominal dia pipes.(18.8.3).

Providing and fixing 1st quality ceramic glazed walls tiles conferming to IS:15622 (thickness to be specified by the manufacturer ) of approved make, in all colours shade except burgundy , bottel green , black of any size as approved by engineer -in -charge , in skirting risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement :3 coarse sand ) and jointing with grey cement slurry @ 3.3 Kg per sqm including pointiong in white cement mixed with pigment of matching shade complete (DSR-8.31)

Providing and laying Rectifited Glazed Ceramic floor tiles of Size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), including pointing the joints with Grey cement Slurry @3.3kg/Sqm including Grouting the Joints with and matching pigment etc., complete. (DSR-11.39)

Providing and fixing ISI marked 35mm thick flush door shutters conforming to IS : 2202 (Part I) non-decorative type,core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters including butt hinges with necessary.(DAR-9.21.1)

Providing and fixing C.P. Brass angle valve for basin mixer and geyser points of approved quality conforming to IS 8931 (15 mm nominal bore)18.53.1