WORK07

Amount

Supply and fixing & testing of feeder type penal board suitable for upto 15 HP electric motor having star delta/ DOL starter ( L&T /BCH), MCB 32 amp.( havals /L&T), capacitor 3 KVR ( L&T/Havals), Single phase priventor( L$T/havals),indicating lamp RYB , Amp. Meter ( 0 to 30Amp) , Volt Meter with slector switch ( 0 to 500 V) size 100 mm, kit kat fuse unit 100 amp,backlite sheet for fixing of 3 phase electric meter of JVVNL electric feeder penal approved as per design and specification mounted on angle iron fram and fixed plain on plain cement concrete plateform, size of feeder penal box 900X 450X1200mm (D-547 dt. 20.12.2011) Star Delta above 5 HP to 15 HP Each 24915 24915

SITC of Cutting back up surface up to 2 Mtr. Depth by digging by Bogi including all layers of crust for laying pipe line etc. and making good to original condition (excluding cost of bitumen) mtr

Supply/ Installation/ Testing/Commissioning of spray pop-up having 15-70 PSI flow Minm. 3.7GPM & ½” female threaded inlet with 1” body diameter, and pop-up ht. 4” complete with Nozzle and other fittings with adjustable angle 0 degree to 360 degree and radius 0 to 15 make Rain bird/Vyrsa as per direction of Engineer in charge.

Supply/ Installation/ Testing/Commissioning of 20 mm Pop up connecting asembly . The tubing shall be made of polypropylene having wall thickness 2.3 mm, with working pressure of 5.5kg/cm2 at 43O pop up connecting asemmbly with 4 elbow

Supply/ Installation/ Testing/Commissioning of Service saddle 50 mm x 20mm made of polypropylene . The body of saddle made of vergin polypropylene in master batch UV stablized galvanized nut and bolt paraller female thread (pressure tight) make

Supply/Installation/ Testing/ Commissioning of 50mm.Dia solenoid valve should be made of ABS plastic having ISI marked complete in all fittings. Make Toro/ hunter/ ceepex as per direction of Engineer-In charge.

Providing and fixing PVC Ball Valve (Flanged) having flow indicator when lever is removed, security pivot to maintain lever in space, double water tight joint,direct injection stem . maximium penetration into the valve. PVC Ball Valve 90 mm

PVC Ball Valve 63mm

Supply/ Installation/ Testing/ Commissioning of Electronically functioning controller unit for 12 stations for Autometic irrigation system, as per direction of Engineer-Incharge

Providing an fixing of a double acting Air release valve 2" made of high strength aluminium/plastic with fiber glass reinforced.The Air release valve shall be capable of both releasing and admitting air from and into the line . The working pressure shall be 10 bars and testing pressure shall be 16 Bars as per direction of Engineer in charge.

Providing and fixing of Auto Flush Hot dip galvanised Screen filter 40m3/Hr confirming to IS 12785:1994 having inlet & outlets connection;s of 3", 2 pressure gauge ports of 3/4" , 2" outlet for flushing of at bottom of filter & maximum working pressure of 14 bars with 2 Pressure Gauze (glycerine filled). 4" (0-10 kg/cm2)

Supply, Installation, commissioning and testing of 15 HP Monoblock submersible pump, AC 3 phase 380/440 Volt, 50 cycle, each supply with foundation bolt, suction stainless steel mesh filter cover with 10 Mtr. Of 2.5 sq mm submersible cable duly insulated.

Supply, Installation, commissioning and testing of Of cable duly insulated (Machtoram / Paige) roll of 762 mtr.

Providing & fixing of valve box with cover and slip fix loking arrangement on all valves. The valve boxes shall be heavy duty plastic with poly vinyle choride reinforce and a green top. 330 x 310 mm having 460mm height Rectangular Valve Box

Providing and laying of Jogging track top layer (wearing course or surface course) materials to be used as aggregate are coal cinder (half burnt only) crushed bricks/red bajri/bricks dust/ dependent on their availabilty at site as directed by EIC. Black cotton soil/Powdered clay mixed with good earth is used as binding material. The maximum size of particales in the wearining course should be less than 4mm. A general ratio of 3 parts of aggregate (size of particales 1 mm to 4mm) and 1 part of binding material should be used. Mixed and compacted by mechincal machines. Laying should be 1 in 1000 in logitudinal and 1 in 100 in cross direction, complete work in required thickness as decided by EIC.

Bidder Name

Amount

Family Fountains(GSTN-08ACMPB6906E1ZR)

Vedika Builders(GSTN-08BETPS2129L1ZS)

Ashutosh Builders(GSTN-08AAZFA3021A1ZS)

Ashutosh Builders

Vedika Builders

Ashutosh Builders

Vedika Builders