MAINT REPAIR AND REPLACEMENT OF ELECTRICAL WIRING FIXTURES ADN CONNECTED ACCESSORIES AT VARIOUS MD ACCN EM INSTLN AND PUMPING FOR WATER SUPPLY DISTRIBUTION SYSTEM AKASH MANDIR QSS HAPPY VALLEY SPORTS COMPLES AND SEA BREEZE AREA AT GMS

Amount

Supply and fix modular switch 1 way 10A, 1 module incl taking the old unsv complete all as specified and directed

Supply and fix modular socket 6A , 2/3 pin combined 2 module incl taking the old unsv complete all as specified and directed

S/Fix switch socket combination 2-in-1, 5 pin 5 and 15 Amp. incl taking the old unsv complete all as specified and directed

S/Fix ceiling rose, bakelite three terminal type. incl taking the old unsv complete all as specified and directed

S & F ceiling fan regulator electronic step type socket mounting type. incl taking the old unsv complete all as specified and directed

S & Fix switch piano (Flush type) 5 amps, 240 Volts, single pole one way incl taking the old unsv

S/Fix socket out let (Flush type) 5 pin 5 amps.incl taking the old unsv

Supply and fix modular switch 1 way 16A, 1 module incl taking the old unsv complete all as specified and directed

Supply and fix modular socket 6A / 16A , 2/3 pin combined 2 module incl taking the old unsv complete all as specified and directed

Supply and fix modular fan step regulator , 120w - 2 module incl taking the old unsv complete all as specified and directed

Supply and fix modular bell push 6A 1 module switch incl taking the old unsv complete all as specified and directed

S & F bell buzzer ding dong type electric single phase 240 Volt. incl taking the old unsv complete all as specified and directed

M/L for taking down carefully old UNSV aluminium point wiring with wooden batten and all accessories of(light, fan, socket or power) such as switches socket ceiling rose, fan regulators, light fitting, main switches DB’s etc and making good disturb surface all as specified and directed.

M/L for point wiring with cable PVC insulated but unsheathed, 1.5 Sqmm, stranded copper conductor in and including PVC caping & casing incl continuous earthing with cable PVC insulated 1.5 Sq mm copper conductor, exclusive MS box but including laminated top sheet cover,washer & screw all as specified and directed for (a) One light point controlled by one, one way switch.

All as per item No 14 above but for One fan point controlled by one, one way switch

All as per item No 14 abovebut for One 5 Amp socket point controlled by one switch on independent board

All as per item No 14 above but with cable PVC insulated 4.0 Sq mm in and including PVC caping & casing incl continuous earthing with cable PVC insulated 2.5 Sq mm copper conductor for power socket 15Amps

Supply and fix in replacement of street light fitting LED type of 20 watt New generation energy saving & environmental friendly long life Versatile pressure die-cast aluminium IP66 roadway luminaire with high power LEDs as light source and electronic driver. mounting bracket suitable to house the light fittinhg , with its Galvanised Flat Iron clamps conntected nuts bolts etc complete all as specified & directed (Note : must for warrenty of 3 yrs to 5 yrs)

S& Fix LED Bulk head fittings ,complete with all accessories andincluding connecting up with twincore twisted flexible copper conductor cable with suitable size of 230V, 50 HZwith glass cover duly grilled with reteriofit bakelite/porcelian holder complete incl LED Bulb 9 W cap all as specified and as directed (Note : must for warrenty of 3 yrs to 5 yrs)

S&F LED Porch light/surface mounting downlighter type with round surface,PDC Al housing light fittings of 10 W cap 3000K incl taking down the old unsv complete all as specified and as directed (Note : must for warrenty of 3 yrs to 5 yrs)

S & F LED light fitting 18/ 20 Watt T5 batten type,PVC extruded batten with decorative end caps complete with polycarbonate /glass tube 4Ft White , internally pre-wired and including connecting up with suitable twisted flexible copper conductor cable with suitable size incl taking down the old USNV complete all as specified and directed (Note : must for warrenty of 3 yrs to 5 yrs)

S & F in replacement of light fittings with wall mounted LED pattern with polycarbonate housing & integrated electronic driver of 9W / 10W cap (max lenght upto 600mm) complete all as specified and directed. (Note : must for warrenty of 3 yrs to 5 yrs)

M/L for replacement of 2 Runs of cable PVC insulated but unsheathed 6.0 Sq mm, stranded copper conductor in and including PVC caping & casing with continuous earthing cable PVC insulated 4.0 Sq mm, stranded copper conductor including taking out old U/S service wire all as specified and directed.

M/L for replacement of 2 Runs of cable PVC insulated but unsheathed 4.0 Sq mm, stranded copper conductor in and including PVC caping & casing with continuous earthing cable PVC insulated 2.5 Sq mm, stranded copper conductor including taking out old U/S service wire all as specified and directed.

M/L for replacement of 4 Runs of cable PVC insulated but unsheathed 10.0 Sq mm, stranded copper conductor in and including PVC caping & casing with continuous earthing cable PVC insulated 6.0 Sq mm, stranded copper conductor including taking out old U/S service wire all as specified and directed.

M&L, for earthing with galvanized steel earth plate electrode 600 x 600 x 6mm thick, buried directly in ground(earth pit not less than 2.25 mtrs deep below ground level)with top edge of the plate not less than 1.5 mtr below normal ground level, connected to galvanized earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers protected with & including 15 mm dia light grade GI pipe necessary excavation and earth works, charcoal and common salt filling, watering arrangement with 20 mm GI pipe light grade including PCC pit with Pre cast RCC (!:2:4) cover, GI funnel with mesh test point, testing & commissioning all as specified and directed..

S & Fix in replacement sheet metal enclosure vertical DBs with provision for FP MCCB frame upto 125A in 16,KA, 25KA, as incomer 4 way double door made all as specified and directed

Supply & fix MCCB 4 pole 415 V 50Hz, 63A with fixed thermal magnetic release breaking capacity 16 KA complete all as specified & directed

S & Fix in replacment sheet metal enclosure MCB, DBs TPN 4 way factory double door made all as specified and directed

All as per item above but MCB, DB, SPN 8 way,

S & F in replacment MCB TPN 63 Amp rating 16KA 415 Volts

S & F in replacement MCB TPN 40 Amp rating 16KA 415 Volts

S & Fix in replacment MCB SPN 16 TO 32 Amp 10KA 240 Volts

S & Fix in replacment MCB, SP 6 to 30 Amp 240 Volts rating

S & F in replacment of bell push piano (Flush type) 5 Amp 240 Volts.

S & F in replacement of bell ding dong electric single phase 240 Volt.

S&F in replcment of single pole and neutral enclosure with a two pin and earth plug socket 240 V with one MCB SP ‘C’ series rating 20 to 30 Amp complete all as specified and directed. Make: L&T/standard/CG/ C&S

S& Fix in replacement of Electronic Ballast suitable for 36/40 watts FTL conventional light fittings complete all as specified and as directed.

S& Fix in replacement of Electronic Ballast suitable for 28 watts FTL conventional light fittings complete all as specified and as directed

Supply , testing and commissioning AC single phase digital , electronic tamper proof energy meter of rating 5 to 30 Amps covered with PVC transparent cover with optical communication port incl taking down the unsv Meter complete all as specified and as directed

Supply testing and commissioning AC Three phase, 3 x 240V, 50Hz , digital , electronic tamper proof energy meter of rating 10 to 60 Amps covered with PVC transparent cover with optical communication port incl taking down the unsv Meter complete all as specified and as directed

Taking down old unserviceable and M & L for Bends tapers any type, (straight, bend, increasing, decreasing or double socket etc). Tee pieces single branch "Y" junction, double branch, cross (all sockets or socket and spigot) collars, caps and plugs of CI fittings suitable size complete all as specified and directed.

S&F in replacement of sluice valve 200 mm bore class PN-I .0 with flanged and iron wheel head, shut and open directed cast on it and including jointing materials, rubber gasket suitable size nut bolts and washer etc complete all as specified and directed.

S&F in replacement of sluice valve 150 mm bore class PN-I .0 with flanged and iron wheel head, shut and open directed cast on it and including jointing materials, rubber gasket suitable size nut bolts and washer etc complete all as specified and directed.

S&F in replacement of sluice valve 100 mm bore class PN-I .0 with flanged and iron wheel head, shut and open directed cast on it and including jointing materials, rubber gasket suitable size nut bolts and washer etc complete all as specified and directed.

S&F in replacement of sluice valve 80 mm bore class PN-I .0 with flanged and iron wheel head, shut and open directed cast on it and including jointing materials, rubber gasket suitable size nut bolts and washer etc complete all as specified and directed.

Excavation of trenches in any type of soil n.exc 1.5 M wide and n.exc 1.5 M in depth for taking out/laying of pipe lines and getting out forming bottom surfaces to required gradients complete all as specified and as directed.

Returning, filling in and including spreading, leveling, watering and well ramming in layers n.exc 25 cm thick complete all as specified and directed

Removing excavated surplus materials to a distance not exceeding 50 Mtrs and deposited where directed at a level not exceeding 1.5 Mtr. Above starting point complete all as specified and directed.

Supply and laying of ductile iron pipes in replacement with spigot and socketed ends, class 'K-7' in any length laid in trenches complete all as specified and directed for the size 150 mm bore of pipe . Make: Electro steel/Jindal/Tata Saw ltd.

Supply and laying of ductile iron pipes in replacement with spigot and socketed ends, class 'K-7' in any length laid in trenches complete all as specified and directed for the size 100 mm bore of pipe . Make: Electro steel/Jindal/Tata Saw ltd.

Supply and laying of ductile iron pipes in replacement with spigot and socketed ends, class 'K-7' in any length laid in trenches complete all as specified and directed for the size 80 mm bore of pipe . Make: Electro steel/Jindal/Tata Saw ltd.

Repair to road after repairing the lead joint/laying or taking out pipes in any depth or width and making good by fitting stone aggregate and well ramming and under stone chipping and again well ramming as per existing surface to road complete all as specified & directed.

S&F in replacement of CI non return valve 80 mm dia complete all as specified and directed.

S&F in replacement of CI non return valve 100 mm dia complete all as specified and directed.

M&L of rubber gasket tyton joints to spigot and socket pipe of bore 150 mm dia DI Pipe complete all as specified and directed

M&L of rubber gasket tyton joints to spigot and socket pipe of bore 100 mm dia DI Pipe complete all as specified and directed

M&L of rubber gasket tyton joints to spigot and socket pipe of bore 80 mm dia DI Pipe complete all as specified and directed

M&L of run lead joint to CI spigot and socketed pipe of bore 200 mm dia complete all as specified and directed

M&L of run lead joint to CI spigot and socketed pipe of bore 150 mm dia complete all as specified and directed

M&L of run lead joint to CI spigot and socketed pipe of bore 100 mm dia complete all as specified and directed

M&L of run lead joint to CI spigot and socketed pipe of bore 80 mm dia complete all as specified and directed

Taking out sluice valve 200 mm dia at any position for replacing of Gland rope suitable , Nut & bolts including flanged rubber gasket leather and fixing of sluice valves with flanged ends , any pattern including all as specified and directed .

Taking out sluice valve 150 mm dia at any position for replacing of Gland rope suitable , Nut & bolts including flanged rubber gasket leather and fixing of sluice valves with flanged ends , any pattern including all as specified and directed .

Taking out sluice valve 100 mm dia at any position for replacing of Gland rope suitable , Nut & bolts including flanged rubber gasket leather and fixing of sluice valves with flanged ends , any pattern including all as specified and directed .

Taking out sluice valve 80 mm dia at any position for replacing of Gland rope suitable , Nut & bolts including flanged rubber gasket leather and fixing of sluice valves with flanged ends , any pattern including all as specified and directed .

Taking up or down existing G.I. tubing 50 mm bore and connection including removing from site complete all as specified and directed.

S&F 3-layer PP-R polypropylene random copolymer concealed pipe SDR 7.4 (PN 16) UV stablised and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings, floors or in trenches etc of size 63 mm OD complete all as specified and directed. Make : SFMC or equivalent in approved by E-in-C

S&F in repair of PP-R gate valves(brass inlet) as per requirement of size 63 mm OD complete all as specified and directed. Make : SFMC or equivalent in approved by E-in-C

Taking up or down existing G.I. tubing 40 mm bore and connection including removing from site complete all as specified and directed.

S&F 3-layer PP-R polypropylene random copolymer concealed pipe SDR 7.4 (PN 16) UV stablised and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings, floors or in trenches etc of size 50 mm OD complete all as specified and directed. Make : SFMC or equivalent in approved by E-in-C

S&F in repair of PP-R gate valves(brass inlet) as per requirement of size 50 mm OD complete all as specified and directed. Make : SFMC or equivalent in approved by E-in-C

Dismantling/Demolition of old existing chamber M & L for Construction of Brick masonry valve chamber of size 900x900x900mm (internal dimension) chamber depth to be reckoned from the top of PCC foundation to top of brick wall, including PCC1:4:8 type D2 in foundation PCC 1:2:4 type B1 in coping, brick work in cm 1:4, plaster 15 mm thick in CM 1:4 flush pointing externally as the work proceeds, MS Sheet cover 3.00 mm thick with handle and locking arranging and angle iron frame of size (25 x 25 x 5 mm) including painting with two coats of synthetic enameled paint over a coat of red oxide primer complete all as specified and directed

Taking out unserviceable air valve and S & F cast Iron Air valves with two outlets , 25 mm dia new CI double out let air valve as per IS : 14845 fixing up in any size of CI/DI water supply mains including all as specified and directed . Make : Upadhyay/Zoloto/Kirloskar

Taking out sluice valve 200 mm dia at any position for re-facing , re-grinding and repacking stuffing box of sluice valve spindle , including taking apart and reassembling and fixing of sluice valves with flanged ends , any pattern including all as specified and directed .

Taking out sluice valve 150 mm dia at any position for re-facing , re-grinding and repacking stuffing box of sluice valve spindle , including taking apart and reassembling and fixing of sluice valves with flanged ends , any pattern including all as specified and directed .

Taking out sluice valve 100 mm dia at any position for re-facing , re-grinding and repacking stuffing box of sluice valve spindle , including taking apart and reassembling and fixing of sluice valves with flanged ends , any pattern including all as specified and directed .

Taking out sluice valve 80 mm dia at any position for re-facing , re-grinding and repacking stuffing box of sluice valve spindle , including taking apart and reassembling and fixing of sluice valves with flanged ends , any pattern including all as specified and directed .

M & L in repair for Sluice valve spindle Brass of size 200 mm bore along with check nuts including all as specified and directed .

M & L in repair for Sluice valve spindle Brass of size 150 mm bore along with check nuts including all as specified and directed .

M & L in repair for Sluice valve spindle Brass of size 100 mm bore along with check nuts including all as specified and directed .

M & L in repair for Sluice valve spindle Brass of size 80 mm bore along with check nuts including all as specified and directed .

Taking out Foot valve 150 mm dia at any position for replacing of Nut & bolts including rubber gasket leather and fixing of foot valves with same pattern including all as specified and directed .

Taking out Foot valve 100 mm dia at any position for replacing of Nut & bolts including rubber gasket leather and fixing of foot valves with same pattern including all as specified and directed .

Taking out Foot valve 80 mm dia at any position for replacing of Nut & bolts including rubber gasket leather and fixing of foot valves with same pattern including all as specified and directed .

R K Traders

M/s Ats Electricals

S J ENTERPRISES

M/S S. N. ENTERPRISES

M/S K MURALIDHARA PATRA

Likitha Enterprises

M/s Ajayshwar Singh Rana