Repairs to roofs sanitary fittings plastering sunken floor internal water supply and other allied works at AC Records and AC Depot under AGE B/R II at GE (N) Ahmednagar

Amount

Dismantling of stone slab & tiles of any description in floor, laid, bedded & pointed in any mortar in any situation etc complete all as specified and directed by Engineer-in-Charge

Demolition of cement concrete (un-reinforced) in ground floor & paving n.exc. 15cm thick below or above ground level etc complete all as specified and directed by Engineer-in-Charge

Demolition of brick/ stone masonry built in cement or lime mortar etc complete all as specified and directed by Engineer-in-Charge

Dismantling wrought iron or mild steel work of any description not otherwise provided etc complete all as specified and directed by Engineer-in-Charge

Taking down cement mortar plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed by Engineer-in-Charge

Taking down shutters of any description exc 1 sq. m but exc 2 Sqm each etc complete all as specified and directed by Engineer-in-Charge

Taking down chowkhats or frames not exc. 1.5 Sqm each with shutters (without taking off shutters from the frames) etc complete all as specified and directed by Engineer-in-Charge

Taking down chowkhats or frames exc. 1.5 sq. m and n exc 4.00 sqm each with shutters (without taking off shutters from the frames) etc complete all as specified and directed by Engineer-in-Charge

Dismantling Asbestos cement (corrugated, Semicorrugated etc.) sheets in roof coverings etc complete all as specified and directed by Engineer-in-Charge

Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings etc complete all as specified and directed by Engineer-in-Charge

M & L moorum filling in floors or paving laid in layers n.exc. 15 cm thick spread levelled and rammed including watering etc complete all as specified and directed by Engineer-in-Charge

M & L hard core of gauge etc. 63 mm but n. exc. 100 mm deposited spread and levelled in layers n. exc. 15cm thick water and rammed etc complete all as specified and directed by Engineer-in-Charge

M&L for 75mm thick PCC (1:3:6) type C-2 using 40mm graded mechanically crushed stone aggregate as in plinth protection finished even and smooth without using extra etc complete all as specified and directed by Engineer-in-Charge

M&L for RCC Type B-1 1:2:4 using 20 mm graded aggregates as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete and floor slab etc complete all as specified and directed by Engineer-in-Charge

M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips etc complete all as specified and directed by Engineer-in-Charge

All as per Sl item No 15 (here-in-before) but 6 to 8 mm dia

M/L for providing 75mm thick plain cement concrete 1:4:8 type D2 (40mm graded stone aggregate) as in sub base finished rough to receive finishes etc complete all as specified and directed by Engineer-in-Charge

M & L for Pre-cast cement concrete type C-1 using 20 mm graded aggregates as block masonry with solid blocks, exc. 10 cm in width and setting in mortar, complete, built in built in cement and sand mortar (1:6) etc complete all as specified and directed by Engineer-in-Charge

M&L for brickwork with flyash modular bricks, straight or curved on plan to any radius in half brick thick walls, built in cement and sand mortar (1:6).

M&L for Autoclaved Aerated Concrete (ACC) block Size 625 x 240 x100mm and 625 x 240 x 200 mm thick fixed with E-mix mortar etc complete all as per manufacturers instructions and as etc complete all as specified and directed by Engineer-in-Charge Make:- ECOLITE/SIPOREX/ ESCILITE/ GODREJ

Material and labour for rendering, 10 mm thick on stone/brick / concrete surfaces in cement and sand mortar (1:4) surfaces finished even and smooth without using etc complete all as specified and directed by Engineer-in-Charge

M & L for preparation of new plastered surfaces applying two coats for cement based paint over one coat of primer etc complete all as specified and directed by Engineer-in-Charge

M & L for preparation of old wooden surface and applying one coats of synthetic anamel paint etc complete all as specified and directed by Engineer-in-Charge

M & L for preparation of old steel surface and applying one coats of synthetic anamel paint etc complete all as specified and directed by Engineer-in-Charge

M & L for preparation of new steel surface and applying two coats of synthetic anamel paint etc complete all as specified and directed by Engineer-in-Charge

M & L for preparation of old plastered surface of wall and applying one coats of cement base paint etc complete all as specified and directed by Engineer-in-Charge

M & L for complete removal of existing treatment and two coats of OBD over a layer of POP finish finished with roller finish on plastered surfeces of wall incl preparation of surfaces etc complete all as specified and directed by Engineer-in-Charge

M & L for preparing old plastered surfaces of walls one coat of OBD over a layer of POP finish finished with roller finish on plastered surfeces of wall incl preparation of surfaces etc complete all as specified and directed by Engineer-in-Charge

M & L for preparing new plastered surfaces of wall and applying two coats of OBD over a layer of putty finish finished with roller finish on plastered surfeces of wall incl preparation of surfaces etc complete all as specified and directed by Engineer-in-Charge

M&L for Machine cut cudappah stone slab 20-25mm thick over cement screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing etc complete all as specified and directed by Engineer-in-Charge

Material and labour for joint free / rectified anti skid ceramic coloured tiles SSR series Johson/ FT series of orient bell/ dura cotto series of nitco or equivalent in kajaria make as specified in PS, 8-10 mm thick as approved by GE (square / rectangular) area of each tile exc 0.18 Sqm but not exc 0.38 Sqm, as in floor etc laid over and including screed bed 15 mm thick in cement mortar 1:6 set and jointed with white or coloured cement to match etc complete all as specified and directed by Engineer-in-Charge

All as per item No. 31 above but in skirting over 10 mm thick backing in cement and sand mortar (1:4)

Material and labour for joint free / rectified anti skid ceramic coloured tiles printed premium series matching to wall makes as specified in PS, 8-10 mm thick as approved by GE (square / rectangular) area of each tile exc 0.06 Sqm but not exc 0.11 Sqm, as in floor etc laid over and including screed bed 15 mm thick in cement mortar 1:6 set and jointed with white or coloured cement to match etc complete all as specified and directed by Engineer-in-Charge

Material and labour for Vitrified ceramic tiles full body virtified tiles GVT series of johnson or equivalent in orient bell/ kajaria/ nitco ,10 mm thick (square / rectangular) of size 800 x 800 mm of any shade as approved by GE in floor etc laid over and including roughning existing surface , making good the damaged surface, levelling, and fixing with cement based tile adhesive ( Make FOSROC, DR FIXIT) as per the manufecturer's instructions and pointed in white or coloured cement to match etc complete all as specified and directed by Engineer-in-Charge

All as per srl item No.34 above but over 10 mm thick backing in cement and sand mortar (1:4) as in dado / skirting or on vertical surfaces

M&L for machine cut kota stone slab flooring 20-25mm thick over 20 mm thick screed base in CM 1:6 mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing etc complete all as specified and directed by Engineer-in-Charge

M&L for Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar incl 15 mm thick backing coat in cement and sand mortar (1:4) etc complete all as specified and directed by Engineer-in-Charge

Material and labour 25mm thick pre-polished granite stone slab of approved shade and colour Jet Black / Telephone Black as in top table, top of WHB, kitchen slab/platform, steps, gate pillars, cills etc or on vertical surfaces including vertical projection, full round moulding the edge laid over screed bed 15mm thick in CM 1:4 jointing , pointing in white cement 1:2 using marble dust with admixture of pigment to match the shade of granite and rubbing polish to achieve mirror finish etc complete all as specified and directed by Engineer-in-Charge

Supply and fix in repairs wash hand basin vitreous China white , flat back or angle type of size 500 X 400 mm incl pillar tap 15mm dia CP, waste chain and plug and porcelain stopper , waste pipe, a pair of brackets,or errecting stand and PVC connection etc complete all as specified and directed by Engineer-in-Charge. Make :- Cat Part No C0471 (CHT) Indus series Of Parryware or equivalent in Hindware Ist quality .

Supply and fix in repairs vitreous China white squatting pan, Orissa pattern of size 580 X 440 mm width with integral foot rest set in cement concrete including flush pipe and connecting to trap / flushing cistren complete all as specified and directed.Make :- Cat Part No C0117 of Parryware or Cat Part No 20042 Of Hindware

Supply and fix repairs 10 ltr capacity PVC valveless, syphonic action type, flushing cistern,low level, all accesories all as directed. Make :- Sleek essence series of Hindware or Cat part No E8303 of Parryware .

Supply and fix in repair health faucet (hand shower) with 8 mm dia 1 m long flexible tube wall mounted / hooked all as per Cat Part No 573 of JAQUAR OR ITS EQUVIVALENT IN MARC / PLUMBER all as directed.

Supply and fix in repairs, shower rose with shower arm from Make:- Cat part No MARC MSR1050 (Shower) and MOR 1260(Shower arm) from MARC or equivalent in Make Plumber,ESS-ESS.

Supply and fixing in repairs vitreous china wash down water closet (Pedestal pattern) white including fixing bolts with and including plastic water closet seat cover closed pattern with flat bottom and cover and MSCP almn hinges device complete connecting to 'P' or 'S' trap all as directed. Make:-Petite series Cat part No C0287(S)/88(P) Incl seat cover Cat part No E8309 of Parryware or equivalent in Hindware

Supply and fixed in repairs stainless steel kitchen sink matt finish with draining over all size 950 X 510 mm and bowl size 410 X 410 X 230 mm, made out of SS sheet of high quality including a pair of brackets, waste coupling, plug and chain, 32 mm dia PVC flexible waste pipe and nahani trap complete all as specified and directed. Make : (i) Model Olympia satin finish silent square range of Norali or equivalent in Diamond

Supply and fix in repairs looking mirror of size 800 mm X600 mm, all as directed. Make:- Cat part No C 8601 Of Parryware or equivalent in Jaquar

Cutting chases in brick/ block wall, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth

Taking up or down 15 mm bore steel tubing and connections, including cleaning for re- fixing or removal to store

All as per Sl item No 48 (here-in-before) but 20 mm bore tubing

All as per Sl item No 48 (here-in-before) but 25 mm bore tubing

Supplying and laying 16 mm dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors etc complete all as specified and directed by Engineer-in-Charge

Supplying and laying 20 mm dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors etc complete all as specified and directed by Engineer-in-Charge

Supplying and laying 25 mm dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors etc complete all as specified and directed by Engineer-in-Charge

S&F 16 mm dia male Brass Threaded Adaptor (MTA/ MBTA) ) etc complete all as specified and directed by Engineer-in-Charge

S&F 16 mm dia Female Brass Threaded Adaptor (FTA/ FBTA) etc complete all as specified and directed by Engineer-in-Charge

S&F 16 mm dia Brass Elbow etc complete all as specified and directed by Engineer-in-Charge

S&F 16 mm dia Brass Tee etc complete all as specified and directed by Engineer-in-Charge

S&F 20 mm dia male Brass Threaded Adaptor (MTA/ MBTA) etc complete all as specified and directed by Engineer-in-Charge

S&F 20 mm dia Female Brass Threaded Adaptor (FTA/ FBTA) etc complete all as specified and directed by Engineer-in-Charge

S&F 20 mm dia Brass Elbow etc complete all as specified and directed by Engineer-in-Charge

S&F 20 mm dia Brass Elbow (3/4 X ½) etc complete all as specified and directed by Engineer-in-Charge

S&F 20 mm dia Brass Tee etc complete all as specified and directed by Engineer-in-Charge

S & F PVC connections 15 mm size with PTMT nuts of length 450 mm etc complete all as specified and directed by Engineer-in-Charge

Supply and fixing in repairs stop cock cast copper alloy, fancy type screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or for union and fix of size 15 mm bore Make:- Cat part No MOR 1320(Orintal series) of MARC or equivalent in PLUMBER, ESS-ESS

Supply and fixing in repairs tubular towel rail, brass chromium plated 20 mm dia `D' type, 60 cm long between flanges including a pair of brackets all as directed. Make:- Cat part No U-0911 of PLUMBER or equivalent in MARC, ESS-ESS

Supply and fixing in repairs bib tap, 15 mm dia, CP cast copper alloy with crutch or butterfly handle screwed down for iron pipe or for brass ferrule all as directed.Make:- Cat part No MOR 1020 A(Orintal series) of MARC or equivalent in PLUMBER, ESS-ESS

Material and labour for special treatment to sunken slab floor incl WC trap etc including cleaning and preparing the surface area for carrying out membrane water proofing treatment, then injection grouting the weak areas on the concrete surface with cementitious grout and applying 10mm thick cement plaster in CM 1:4. Then providing and laying Mineral Top APP (Atactic Polypropylene Polymer) modified prefabricated 5 layer 4mm thick water proofing membrane, black finished rainforce with non woven polyester matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 Litre per Sqm by the same membrane manufacturer of density at 25ºC, 0.87-0.89 Kg per litre and viscosity 70-160 cps. Over the primer coat the layer of membrane shall be laid using Butane Torach and sealing all joints etc and preparing the surface complete. and providing PCC 1:5:10 type E2 using 40mm graded mechanically crushed stone aggregates in sunken slab and 75mm thick PCC 1:4:8 type D2 using 40mm graded mechanically crushed stone aggregates as base, 40mm bore GI pipe, light grade of length not less that 50 cm as spout, non-skid glazed tiles as per existing pattern/size/tint with and incl WC viterous china squatting pan 580x440mm with integral footrests/pedastal pan incl seat cover, white, area of WC exc 1.50 Sqm but nexc 5.00 sqm etc after dismantling the existing sunken floor etc complete all as specified and as directed Make : Super Thermolay MT of STP / TEXSA / FosRoc Note : Work has to be carried out strictly by the authonticated applicator of the manufacturer and as per manufacturers specification as approved by GE.

All as per item No. 67 above but in Bath area exceeding 1.50 but not exceeding 3 Sqm without considering WC of any type

All as per item No. 67 above but in Kitchen (Nahani trap portion) area not exc 0.50 Sqm

Supply and fixing in repairs twin bib tap, 15 mm dia, CP cast copper alloy with crutch or butterfly handle screwed down for iron pipe or for brass ferrule etc complete all as specified and directed by Engineer-in-Charge Make:- MARC or equivalent in PLUMBER, ESS-ESS

Supply and fixing in repairs 15 mm dia pillar tap, cast copper alloy, with capstan heads, chromium plated, fancy type, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe etc complete all as specified and directed by Engineer-in-Charge Make:- Cat part No MOR 1010(Orintal series) of MARC or equivalent in PLUMBER, ESS-ESS

M&L cast iron floor trap with grating 75mm dia including jointing to waste pipe fixed in cement concrete type (1:2:4) type B1 including removing old traps etc complete all as specified and directed by Engineer-in-Charge

S&F galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aparture 1mm etc complete all as specified and directed by Engineer-in-Charge.

M&L in repairs 3 mm thick figured glass pin head type, and glazing with oil putty in square n exc 0.5 Sqm in each pane to steel windows and wooden windows including glazing pins and wooden beadings etc. complete all as specified and directed by the Engineer-in-Charge.

M&L in repairs 3 mm thick plain sheet glass and glazing with oil putty in square n exc 0.5 Sqm in each pane to steel windows and wooden windows including glazing pins and wooden beadings etc. complete all as specified and directed by the Engineer-in-Charge.

S&F Plastic water closet seat, white , closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device

Supply and fix 20mm dia powder coated chromium plated curtain rods incl brackets etc all as directed.

Material and labour for 60 mm thick, PCC pavers interlocking tiles of glossy finish, with grey cement and no pigment ,any shape & size conforming to IS 15658 of 2006. M-35 grade made up with 12.5 mm graded mechanically crushed stone aggregates, factory made over and incl 30mm thick sand cushioning and joints filled with fine sand incl levelled with plate vibrator & sweeping etc complete all as specified and directed by Engineer-in-Charge

Supply and fix power coated aluminium three track window made out of Jindal aluminium sections Nos. 20671, 20672, 20690 & 20668 including 5mm thick plain sheet glass including rubber / neoprene beading and locking arrangement all as directed. Note : Aluminium frame for fixing three track windows shall be measured and paid separately under relevant item of this BOQ

S&F factory Made Solid PVC Moulded Door Shutter with particle board core, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick 3D wood grain Moulded PVC Sheet Polyurethane painted on the front face & 2mm prelam PVC Sheet on back face , supplying & fixing in frame at site as per specification & drawing etc complete all as specified and directed by Engineer-in-Charge

S&F of solid PVC door frame 2mm thick 3D wood grain Moulded PVC Sheet Polyurethane painted on the front face & 2mm prelam PVC Sheet on back face

S&F 100 mm size butt hinges medium weight, cold rolled mild steel, and fixed.

S&F 150 mm size aluminium anodised, barrel tower bolts of ex- truded section and fixed.

S&F 150 mm size extruded aluminium alloy handles, fabricated type, anodised

Material and labour in repairs for false ceiling with Vinyle faced Arm-Gyp-FB, ceiling 600 x 600 x 9mm thick with washable metallized polyster foil backing with Vinyle covered edges, supporting sections shall be of suitable size from same makes embossed on sections and level adjuster duly suspended by 2 mm dia GI wire fixed to roof at 600mm centre to centre as per manufacturere's instructions / specification and all as directed including taking down/ out existing. Make : Armstrong or equivalent in Saint Gobian / Lafarge

Material and labour for preparation of old plastered treated surfaces of walls by brooming down and and applying one coat of weather proof 100 % acrylic exterior emulsion apex ultima paint of any tint as approved by GE after cleaning the surfaces complete all as specified and as directed. Make : Asian paints or other make as specified in PS

Supply and fix colour anodised aluminium doors with frames in two panels top and bottom panel with 5 mm thick sheet glass aluminium cleats, rubber / neoprene beading etc all as directed. The aluminium sections shall be of the following sections:- NOTE: Aluminium hinges, tower bolt, door spring shall be measured and paid separately. a) Vertical style - 47 X 44.5 X 2.25 mm th @ 1.15 Kg / rm b) Top rail - 47.5 X 44.5 X 2.75 mm @ 1.33 Kg / rm c) Bottom rail - 114.6 X 44.45 X 2.3 mm @ 2.06 Kg / rm d) Securing rebate @ 0.102 Kg / rm e) Frame 47.5 X 44.45 X 2.25 mm @ 1,12 Kg / rm Note : All accessories shall be colour anodised matching to door sections.

M&L for rendering 15mm thick in CM 1:6 on fair faces of concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.

Supply and fix rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) of 500 litres capacity, tripple layered, hoisted and fixed in position including 20 mm dia ball valve, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed to iron pipe and connecting all as directed.

All as per item No. 89 above but 1000 ltr capacity

All as per item No. 89 above but 2000 ltr capacity

Supply and fixing 300 mm long Aluminium anodized sliding door bolt with hasp , staple (bolt type) fixing clips of sheet cast or extruded section & fixing bolts , sliding bolts of extruded section complete all as specified

Supply and fix aluminium die cast body Door closer hydrau- lically regulated, designation No. 2, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg and fixed

Material and labour for Chequered cement concrete tiles 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors with grey cement and pigment, machine pressed, factory made, set, jointed and pointed in neat cement slurry in floors over and including screed bed 15mm thick in cement mortar 1:6 complete all as specified.

M&L for preparing new wooden surfaces of any description, not otherwise descri-bed, over 10cm width or girth applying two coat of synthetic anamel paint over one coat of pink primer.

M&L for pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified, coloure and design as approved by GE

M&L for pre- painted galvatume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified, coloure and design as approved by GE

S&F of Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240

S&F of steel work in post, Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) Fe 410 -W (Gde- E- 250) quality- A etc complete all as specified and directed by Engineer-in-Charge

M & L 6mm thick asbestos cement, corrugated or semi corrugated sheets in roof walls fixed with 'L' type or 'J' type or cranked hook bolts, washer etc complete all as specified and directed by Engineer-in-Charge

Fixing only 6mm thick asbestos cement, corrugated or semi corrugated sheets in roof walls fixed with 'L' type or 'J' type or cranked hook bolts, washer etc complete all as specified and directed by Engineer-in-Charge

M&L for PCC (1:2:4) type B-1 using 20mm graded stone agg as in coping, on top of wall, bed blocks and the like including weathering, slightly rounded or chamfered angles and throating as directed by Engr-in-Charge including use of necessary form work etc complete all as specified and directed by Engineer-in-Charge

M&L for 35 mm thick plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated

S&F 30 mm thick IInd C/L H/W factory made glazed & skeleton shutters open rebated and prepared to receive glass gauge, divided into square or rectangles with plain chamfered or rounded mitred & rebated slash bars including beads mitred for securing glass wire gauge etc complete all as specified and directed by Engineer-in-Charge

S & F pressed steel frames for doors with one or more rebates incl necessary hold fasts, hinges, lock strike plate etc complete as specified size of frame 125 x 60mm.

M&L for cement concrete type B 0 1:2:4, using 12.5 mm graded aggregate as in filling in steel frame.

S&F 300mm MS ordinary rat tail rod pattern spring including roller and roller plate complete in repairs.

Supply and fixed in repairs HDPE pipe 32 mm dia of pressure rating 6 Kg / Sqcm fixed complete to walls or in floors etc complete all as specified and directed by Engineer-in-Charge

Supply and fixed in repairs 110 mm dia PVC SWR pipe, single socketed in any length with rubber ring joints fixed with clamps to walls etc complete all as specified and directed by Engineer-in-Charge

Supply and fix in repairs 110 mm bore PVC (SWR) bend, radius etc complete all as specified and directed by Engineer-in-Charge

Supply and fix ball brass valves, 15 mm dia, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed etc complete all as specified and directed by Engineer-in-Charge

Supply and fixed in repairs 32 mm dia PVC waste pipe (outlet pipe) plain fixed to waste coupling of WHB or Sink etc complete all as specified and directed by Engineer-in-Charge

M&L for lnsulated PVC Wall Lining consisting of PVC Insulated Panels having expanded polystyrene (EPS) stuck to 2mm thick fitted into the wall as per specifications and drawing PVC Insulated Panel with wood grain printed PVC sheet used instead of plain colour sheet etc complete all as specified and directed by Engineer-in-Charge

M&L for providing and fixing 10mm thick plaster of paris ceiling (Gypsum anhydrous) to flat surface metal frame work / suspenders and reinforced with G.I. wire mesh inclusive all fittings etc complete all as specified and directed by Engineer-in-Charge

Supply and fix in repair PVC bib tap 15 mm dia, screwed for iron pipe etc complete all as specified and directed by Engineer-in-Charge Make : Prayag or equalent

An amount of Rs 67,295.00.00 shall be deducted from BOQ on account of schedule of credit

M/s AG PATHAN

M/S Bhima Construction

M/S-B.R.SONAWANE

R. T. Saluji

L N Constructions

G.A. Construction