Improvement Works to the RCC Chimney I II Unit I II III from EL 0 mtr to 122 mtr

Replacement of damaged handrails with 50mm dia medium class GI pipes in place of corroded & worn out hand rails including dismantling, removal and devolution of scrap materials, supplying, fabrication and fixing by welding of new handrails, painting with one coat of red oxide primer and inclusive of cost of all materials, lead,lift upto top of chimney, hire charges for welding plant,cost of welding rods,cost of cutting gas and accessories, all labour charges, safety arrangements etc., complete.

Chipping the existing concrete and roughening the surface for future bonding and thorough cleaning the surface including cost of all materials, labours, lead, lift, curing, etc. complete.

Providing and fixing Chicken mesh in the damaged portions and tying with the existing reinforcement including cost of all materials, labour, lead, lift etc., complete.

Providing patch up works to the damaged cracked concrete surfaces, using concrete mix of RCC 1:1.5:3 for 50mm thickness using OP/PP cement with 6 to 10mm metal chips mixed with Nitobond AR in cement mortar at 100ml/bag of cement including cost of all materials, labours, lead, lift, curing, etc. complete.

Providing primer coat of epoxy compound and applying 10mm thick epoxite epoxy screeding, using quartz sand and epoxy resin and hardner including cost of all materials, labour, lead, lift etc. complete.

Providing two coats of epoxite epoxy seal coat over screeding surface using epoxy resin and hardener, rate including cost of all materials, labour, lead, lift, etc complete.

Providing HILTI joint arrangements by drilling holes into the old concrete and new concrete to a required depth and injecting motor HIT - RE 500@ 0.50ml/mm chemical,rate including the cost of chemical,Drilling, Drilling arrangements,Labour,lead,lift,etc.,complete.

Supply of MS flats of size 80x8mm for fixing safety ladder in damaged areas including cost of materials, hire charges for welding and cutting machine, welding rods, lead,lift, safety appliances etc., complete.

Painting two coats of ready mixed enamel paint of approved quality and colour to the outer Concrete surfaces of the chimney from EL 0.00m to EL 220.00m height including cost of paints, brush, all labour charges, cleaning of the existing old surfaces for proper painting, scaffolding charges, safety measures required for higher elevation, lead,lift etc., complete. a) EL 0.00m to 122.00m

Painting two coats of ready mixed enamel paint of approved quality and the hand rails in the inspection platforms at different levels , including cost of paints, brush, all labour charges, cleaning of the existing old surfaces for proper painting, safety measures required for higher elevation, lead,lift etc., complete.

Special ceiling plastering with CM 1:3, 10 mm thick for RCC works with Nitobond AR mixed in cement mortar at 250 ml/bag of cement including cost of all materials, labours, lead, lift, hacking the area, curing, etc., complete.

STANDARD REHBILITATORS PRIVATE LIMITED (BID ID -1101514)