SPECIAL REPAIR TO MAP QTRS AT AF STN ARJANGARH UNDER GE AF GURGAON

Amount

Taking down cement plaster on brick walls & concrete surfaces & the like including raking out joints, hacking for key, scrubbing down with water etc., any description, including removal of rubbish outside MoD land, complete all as specified and directed.

M&L Rendering 15 mm thick on brick or concrete surfaces in cement mortar (1:4) finished even and smooth without using extra cement and using WPC including necessary scaffolding upto 4th floor complete all as specified and directed. (Note : WPC shall be measured and paid separately.

M&L Rendering 15 mm thick on brick or concrete surfaces in cement mortar (1:6) finished even and smooth without using extra cement including necessary scaffolding upto 4 mtr complete all as specified and directed.

M&L Rendering 10 mm thick in cement mortar (1:3), as on concrete surfaces (such as top & sides of chajjas, beams, balcony ceiling etc.) finished even and smooth without using extra cement including necessary scaffolding upto 4 mtr complete all as specified and directed.

Taking down chowkats or frames with shutters (with out taking off shutters from the frame) not exceeding 1.50 Sqm each complete all as specified and directed.

Taking down chowkhats or frames with shutters without taking off shutters from the frame exceeding 1.5 Sqm but not exceeding 4 Sqm each and complete all as specified and directed.

Taking down shutters of any description exceeding 1.00 Sqm and not exceeding 2.0 Sqm complete all as specified and directed.

S & F pressed steel door frames with one or more rebates including necessary fixing lugs hinges lock strike plate etcas specified size of frame 125 x 60mm complete all as specified and directed.

All as per Srl item no 8.00 but 165x60 mm.

S & F 35mm thick 2nd class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc.; size of members of shutters as specified in SSR Part – I, Section – 8, clause 8.20 (a) ; supplied and fitted to chowkats complete all as specified and directed.

S & F flush shutter 35mm thick solid core construction with block board core and plywood face panels commercial type on both sides with lipping / frame to match complete all as specified and directed.

M&L for Factory made solid panel PVC door shutter 30mm thick (Style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded coloured PVC ’C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and single side prelaminated PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail; Panelling of single side prelaminated PVC sheet to be fitted in the MS frame welded/ sealed into the stiles and rails with suitable PVC sheet beading, and jointed together with solvent cement, supplying and fixing in the frame at site as per specification complete all as specified and directed.

S&F Factory made PVC solid door frame of size 50 mm x 47 mm with wall thickness of 5 mm made out of 5 mm thick plain colour PVC sheet cut at corner and jointed with 02 Nos., 150 mm long brackets of size 15 mm x 15 mm mild steel square tubes 19 gauge including vertical door profiles reinforced with 19 mm x 19 mm steel square tube of 19 gauge (EPDM) rubber gasket weather seal provided throughout the frame and fixed to wall with 65/100 mm long mild steel screws through the frame by using PVC fasteners (minimum of 04 Nos. of screws to be provided for each vertical member & minimum 02 Nos. for horizontal member), complete all as specified and directed.

S & F mild steel tower bolts, stove enamelled black, with bright bolt and fixed, length of bolt 200mm long complete all as specified and directed.

S & F mild steel sliding door, bolts, plate type, stove enamelled black with bright bolt not less than 12mm bore, length of bolt 250mm complete all as specified and directed.

S & F mild steel, 300mm, ordinary rat rail rod pattern spring including roller and roller plate complete all as specified and directed.

S & F aluminium handle cast type anodised, 125 mm long complete all as specified and directed.

S & F SS butt hinges, medium weight 100mm size complete all as specified and directed.

M&L Cement concrete 1:3:6 type C–1 filling of pressed steel frame and hold fast blocks etc complete all as specified and directed.

Cutting hole in brick wall built in cement mortar exceeding half brick but not exceeding one brick and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4, type B – 1 complete all as specified and directed.

S & F mild steel work for hold fasts,wall ties, ,bands, straps clamps, handles for manhole covers etc confirming to Fe- Fe 290grade- E165 complete all as specified and directed.

S&F mild steel work as in joist, channel, angle etc with or without connecting plate grade Fe-410-0 as in chowkhats including hold fasts etc complete all specified and directed.

M&L for factory made box type steel window with pintol hinges & 2 Nos 150mm mild steel tower bolts to each shutter, steel handle and without glazing bars dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified and directed.

M&L for factory made box type steel window with pintol hinges & 2 Nos 150mm mild steel tower bolts to each shutter, steel handle and with glazing bars dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified and directed.

M&L for factory made box type steel ventilator with glazing bars dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified and directed. Note : (i) Glazed shutter with 4.00mm thick glass, Mesh shutter with 32 gauge stainless mesh and M.S. grill as per item No No.23.00, 24.00 & 25.00 of above to be inclusive in the rate quoted for unit.

Material and labour for preparation of new surfaces of wood and wood based materials of any description and girth, not otherwise described and treated with two coats of synthetic enamel paint over a coat pink primer complete all as specified and directed.

M&L for preparation of new surfaces of steel or iron work of any description not otherwise described over 10cm width or girth and applying two coat of synthetic enamel paint over a coat of primer on steel surfaces complete all as specified and directed.

Dismantling floor,hearth or wall tiling including cement mortar bedding (but not backing)removing serviceable tiles to store and rubbish off the permises complete all as specified and as directed

M&L, Non-skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exc 0.06 sqm but n.exc 0.11 sqm, in floors etc. set & jointed in neat cement slurry & pointed in white or coloured cement over 15mm thick screed bed in CM (1:6) complete all as specified and directed.

M&L First quality, Non skid ceramic coloured joint free tiles, 7 to 8 mm thick (square or rectangular) area of each tile exe 0.18 Sqm but n.exe 0.38 Sqm, laid in floors set and jointed with neat cement slurry @ 3.00 kg/Square Metre over and including 15 mm thick screed bed of cement mortar (1:4) including pointing in white cement with pigment to match the shade of tiles, and leveling the floor with PCC 1:2:4 type B0 of required thickness if required to maintain slope etc. complete all as specified and directed.

M & L first quality coloured glazed ceramic tiles, fixed in pattern of different colour including border of size 350x 250x 7 mm / 450X 350X 7mm / 350x450x7 mm thick as in vertical surfaces such as dado/skirting, set and jointed in neat cement slurry and pointed in white or coloured cement to match with colour of tiles laid on and including 10 mm thick rendering in cement mortar (1:3), including pointing in white cement with pigment to match the shade of tiles, complete all as specified and directed. Note :- Pattern of the tiles will be decided by GE at the time of execution.

Dismantling/removing old damaged worn out APP of any thickness incl screed bed or plastering of any thickness and removing the rubish materials outside MOD land at a dumping place earmarked marked by any state govt/municipalities etc any distance complete all as specified and directed.

M&L Plain cement concrete (1:2:4) type B-1, using 20 mm graded mechanically crushed stone aggregates as in padding to roof to maintain the required slope and finished the surface even and smooth without using extra cement, complete all as specified and directed.

Material and labour 15 mm thick cement plaster in CM (1:4) mixed with WPC as per manufacturer’s instructions @ 150 ml by per bag of cement on concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed. Note : WPC shall be measured and paid separately.

Supply only liquid water proofing compound complete all as specified and directed.

Cutting groove in brick wall 75 mm wide and 65 mm deep for inserting APP polymer membrane and shaping horizontal face of groove with cement mortar 1:3, including removal of rubbish outside MoD land, complete all as specified and directed.

Material and labour, water proofing treatment of roof consisting as under:- (a) Applying a tack coat of industrial bitumen 85/25 at the rate of 1.20 kg per sqm over a coat of primer @ 0.30 litre/ sq.m including preparation of roof surfaces (b) A layer of 3mm thick APP polymeric membrane of weight not less than 3.60 kg/sqm, reinforced with polyester non-woven fabric (weight not less than 160gm/sqm), duly sealed at over laps & joints with flame (by torch application) all as per manufacturer’s instructions complete all as specified and directed.

All as per Srl item No. 37.00 here-in-before but on vertical surfaces, using hot blown bitumen having penetration value 30/40 applied 1.20 Kg/ Sq.m over primer @ 0.30 litre/ Sq.m, complete all as specified and directed.

Preparation of newly plastered surfaces of wall and applying two coat of Cement Base Paint paint 100% acrylic of approved colour and shade by accepting officers over and including a coat of primer as per manufacturers instrctions including necessary scafolding upto 4th floor complete all as specified and directed.

Material and labour preparation of new plastered surfaces and apply two coat of oil bound distmper over a coat of primer, including necessary scafolding upto 4th mtr complete all as specified and directed.

M &L for preparation of newly plastered surface of ceiling and applying two coats of white wash including necessary scafolding upto 4th mtr complete all as specified and directed.

Supply and fixing, stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed to steel frames with tinned tacks, or galvanized wire staples, or fixed to wooden frames with first class hard wood bead, complete all as specified and directed.

S&F in repairs stain less steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed together with aluminium anodised mesh 100x100x1.0mm thick fixed tinned tacks or galvanised wire stapple etc as in wire gauzed shutter including repacement of broken wooden beadings as required at site complete all as specified and directed.

Hacking out old broken glass (any thickness size, quality or description) from wooden/ steel frames, glazed with putty or fixed with wooden beads/ metal pins complete all as specified and directed.

S & F 3mm thick Sheet glass ordinary quality and glazing with oil putty or wooden bead in squares not exceeding 0.5 Sq. m in each pane, complete all as specified and directed. Note:- New wooden required for glazing glass in wooden window will be paid for separately.

S & F 3mm thick figured glass, pin headed type and glazing with oil putty or wooden bead in squares not exceeding 0.5 Sq. m in each pane, complete all as specified and directed.

Supply and fixing, drapery rod of mild steel 25mm dia, ribbed/fancy type, PVC powder coated, any shade, including set of fixing brackets, for span not exceeding 2m, fixed to wall in repairs, with PVC finols/finnels, connected accessaries, rubber packing, required screws and PVC rawal plugs as required complete all as specified and directed.

M&L complete removal of existing treatment by scraping down completely on brick wall/concrete/plastered surfaces thoroughly, washing, rubbing down with water cleaning the surface upto the entire satisfaction of Engineer-in-Chargeand a primer coat of " cemprover of M/S Snocem on entire surfaces and filling the craks/depression/holes etc by putty as directed and making good weak plastereded/unplastered surfaces with cement plaster in CM 1:4 than applying two coat of cement base paint coating of approved colour and shade by accepting officers on walls upto 4th floor complete complete all as specified and directed. Make snowcemplus/Super acrocem including necessary form work upto 4th floor.

M&L complete removal of existing treatment by scraping down washing rubbing down with water and cleaning the surface up to the entire satisfaction of Engineer-in-Charge and including opening of existing cracks , filling up of "V" cracks with epoxy expandable putty to required depth, making good weak plastereded/unplastered surfaces with cement plaster in CM 1:4 applying two coat of oil emulsion over 2 to 3 mm thick birla putty punning, complete all as specified and directed.

Complete screpping of existing treatment on walls including cornices pilasters steel scrappers , wire brushing, and efforescent salts and treating oil and greasy spots and making good weak plastereded/unplastered surfaces with cement plaster in CM 1:4 applying three coat of white wash on ceilling upto 4th floor complete all as specified and directed by Engineer-in-Charge. and applying three coats of white wash incl prepration of surfaces complete all as specified and directed.

Preparation of old painted surfaces of wall plastered/concrete based material of any description over 10cm width or girth and applying two coats of synthetic enamel paint complete all as specified and directed.

Preparation of old painted surfaces of wood and wood based material of any description over 10cm width or girth by cleaning, sand papering, brushing with wire brushes, scrapping by steel scrappers etc , filling in crevices and cracks etc with approved filler and applying two coats of synthetic enamel paint to give an even and smooth surface having no sign of brush marks complete all as specified and directed.

Taking down steel tubing 15mm bore and connections including cleaning for refixing or removing to stores complete all as specified and directed.

All as per Srl Item No 53.00 here in before but 20mm bore complete all as specified and directed.

S & F 15mm dia tubes medium grade, galvanized, with all fittings such as sockets, bends, elbows, tees etc, concealed/surface fixed to walls and ceiling or laid in floors complete all as specified and directed. Note : Cutting chases as required shall be measured and paid seperately.

S & F 20 mm dia tubes medium grade, galvanized, with all fittings such as sockets, bends, elbows, tees etc, concealed/surface fixed to walls and ceiling or laid in floors complete all as specified and directed. Note : Cutting chases as required shall be measured and paid seperately.

Cutting chases, pinning in brick walls, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landing, steps, cills, sunshades, shelves, lintels, etc; and cuttings chases for concealed water tubing or concealed conduit wiring, etc and making good, cutting not exceeding 10 cm girth complete all as specified and directed.

S & F in repairs shower rose 125mm size round shape single flow (ABS Body chrome plated with grey face plate) with rubit cleaning system r incl shower arm casted 190 mm long flat shape for wall mounted showers with flange incl fixing to steel pipe or union complete all as specified and directed.

S & F in repairs Ist quality vitreous china wash basin, white, flat back, size 550x400mm , PVC connections suitable for hot and cold water,bottle trap (with internal partition) 32 mm size with 300mm &190mm long wall connection pipes & wall flange, and fixing withbrackets/bolts including cutting and pinning in etc complete all as specified and directed.

All as Srl item No 59.00 but fixing only.

S&F in repairs 15 mm brass CP mixer for mixing hot and cold water screwed down from iron pipe and fixed complete all as specified and directed.

Supply and fix in repairs Cast iron floor trap with dia of outlet 100 mm, with CP grating hinge type in kitchen and other situation including PCC 1:2:4 type B1 for setting the trap and jointing to waste pipe including taking out old floor trap , complete all as specified and directed.

Supply and fix in repairs Cast iron floor trap with dia of outlet 75 mm, with CP grating with hinge in kitchen and bath etc situation including PCC 1:2:4 type B1 for setting the trap and jointing to waste pipe including taking out old floor trap , complete all as specified and directed.

M & L gully traps salt glazed stone ware 150 x 150mm size square mould type ‘S’ or ‘P’ PCC for bed, trap and surrounds shall be 1:3:6 type C- 1 using graded stone aggregate incldg grating of cast iron complete all as specified and directed.

Dismantling of cast iron or reiforced concrete drain pipes jointed in cement mortar and taking out from trenches 100 / 75 mm bore (sand cast) complete all as specified and directed.

Material and labour, 100mm dia cast iron soil, waste and vent pipes (sand cast) in any length with or without ears, including cement jointing, laid in trenches or in floors including necessary excavation and earth work, complete all as specified and directed.

Material and labour, 100mm dia cast iron soil, waste and vent pipes (sand cast) in any length with or without ears, including cement jointing, fixed to wall with and including mild steel clamps and bolts with washers, complete all as specified and directed.

Material and labour, 75mm dia cast iron soil, waste and vent pipes (sand cast) in any length with or without ears, including cement jointing, laid in trenches or in floors including necessary excavation and earth work, complete all as specified and directed.

Material and labour, 75mm dia cast iron soil, waste and vent pipes (sand cast) in any length with or without ears, including cement jointing, fixed to wall with and including mild steel clamps and bolts with washers, complete all as specified and directed.

S & F 100mm bore bends, diminishing pieces or tapers complete all as specified and directed.

S & F 75mm bore bends, diminishing pieces or tapers complete all as specified and directed.

S&F in repairs vitreous china squating pan, 'Orissa' pattern, size 580x440 mm white, with integral foot rests, including 100mm cast iron 'P' or 'S' trap and 100mm cast iron sanitary connection socket to fit WC outlet including connection to trap, to flushing pipe, anti-syphonage pipe etc. complete including making good to floor complete all as specified and directed.

Material and labour, shortcrete to existing RCC Chajja, facia, parapet, beams, landings and similar RCC members after removing all loose concrete & preparations of surface, application of derusting chemical such as Dr Fixit Rust Remover or equivalent, welding additional bars/welded steel wire fabric if found necessary, priming reinforcement bars with a coat of zinc primer of coating not less than 40 micron, provision of bonding agent with bonding material like Dr Fixit bonding agent and repair to external RCC structure with slurry light and steel/ply form work and shortcrete concrete of mixed 1:3:1 (one part of cement, three part of coarse sand and one part of 10mm and down aggregate) of minimum 50mm thick incl plastering 5 mm thick in CM mortar 1:3 all as specified in IS 9012-1978 (all priming and bonding epoxy based paint shall be of Dr Fixit epoxy zinc primer or equivalent) etc complete all as specified and directed, as below:- Note(s) : 1. The rates include for necessary formwork and scafolding etc. 2. Reinforcement and welded steel wire fabric will be measured and paid separately. Upto the height of 4 th storey bldg complete all as specified and directed.

Mild steel TMT bars 10 mm dia and over cut to length, bent to shape required, including cranking, bending etc., and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips, complete all as specified and directed.

Supply only welded steel wire fabric, weight not exc 4kg/sqm, complete all as specified and directed.

Demolition of stone slabs and tiles of any description or thickness in floors/walls, aprons etc laid bedded and pointed in any mortar complete all as specified and directed.

Material and labour, 18-20mm thick machine cut kota stone slab as in flooring, steps of stair(treads), set with neat grey cement slurry @ 3Kg/Sqm, laid over and including 20mm thick cement and sand mortar (1:6) screed bed/bedding layer, jointed with grey cement slurry mixed with pigment to match the sahde of the slab including rubbing and polishing ing damaged stone slab of any description complete all as specified and directed.

Material and labour, machine cut kota stone slab 18-20mm thick as in skirting/dado, riser of steps, laid over and including 10mm thick backing coat in CM (1:4), set in neat grey cement slurry @ 3Kg/Sqm, and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing, complete all as specified and directed.

Demolition of brick work or rubbled stone masonry including all quoins arches , pillars etc built in cement mortar and including removal from the site complete all as specified and as directed

M&L Brick work with sub class 'B' Bricks, straight or curved on plan exceeding 6 mtr mean radius built in CM 1:6 complete all as specified and directed.

S & F in repairs stainless steel sinks with drainage board made out of 1.00 mm thick sheet for kitchen with plugs, washers, waste pipes, including bedding in cement mortar to dwarf wall or including fixing cast iron cantilever brackets and connecting union to pipe overall size 915 mm x 460 mm with bowl size 410mm x 330mm x 160mm, with and including PVC waste pipe and CP waste coupling 32 mm dia and making good to disturbed surfaces, fixed in repairs, complete all as specified and directed.

Dismantling water tanks of capacity exceeding 250 and not exceeding 500 ltrs complete all as specified and directed.

S & F rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR part I of capacity 500 Litres complete all as specified and directed.

M&L in repair ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball with minimum weight 210 gm screwed for 20mm bore dia iron pipe supplied and fixed in repairs complete all as specified and directed.

M & L 75 mm thick, plain cement concrete 1:3:6, type C-2, using 40 mm graded mechanically crushed stone aggregates, laid in 1:20 slope as in plinth protection including making joints at 3.00 metre intervals and at each corner, the joint shall be filled with mastic filling (to full depth) comprising of one part heated hot blown bitumen 85/ 25 & two parts heated sand (by volume), surface finished even and smooth without using extra cement, complete all as specified and directed. Note: The concrete shall be laid at a stretch not exceeding 3 metre in length and width of joint shall not be more than 12 mm.

S & F in repairs 10 litres capacity, PVC valve less, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and suitable flush pipe PVC 32mm dia complete all as specified and directed.

Supply and fix in repair 110mm PVC (SWR) pipes single socketed in any length along with rubber ring joint fixed to walls with all accessories complete all as specified and directed.

S&F PVC bend any radius 100 mm bore complete all as specified and directed.

M&L for granite tiles/slab of sizes as directed (of any type) 20 mm thick om cooking platform,shelves etc machine cut,bedded over 20 mm thick in CM1:4 and jointed with grey cement slurry and pointed with white cement with admitures of pigment to match with shade of granite stone incl grinding and polishing complete all as specified and directed.

S & F in repairs PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified and directed.

S & f in repairs bib taps, cast copper alloy, chromium plated, with crutch or butterfly handle, screwed down, screwed for 15 mm bore iron pipe or for brass ferrule complete all as specified and directed.

S&F in repairs 15mm dia gun metal gate valve, with iron wheel head, screwed both ends for iron pipes complete all as specified and directed.

S&F in repairs 20mm dia gun metal gate valve, with iron wheel head, screwed both ends for iron pipes complete all as specified and directed.

S & F in repairs angle cock/stop valves, cast copper alloy, chromium plated, fancy type, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for 15 mm bore iron pipe or for brass ferrule complete all as specified and directed.

S & F in repairs stop valves, cast copper alloy, chromium plated, fancy type, with long shank and cup (concealed type), screwed down, high pressure, with crutch or butter fly handle, screwed both ends for 15mm bore iron pipe or for unions complete all as specified and directed.

M&L for Pre-Cast reinforced cement concrete 1:2:4 type B-1 with using 20 mm graded stone aggregates as in cover slabs (for manholes etc)chullah hoods, chajas, water troughs, mangers, shelves and similar articles with plan faces set in cement mortar (1:4) including necessary use and waste form work etc complete all as specified and directed Note - Reinforcement shall be measured and paid separetly

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for (reinforcement cut as required to facilitate demolition), complete all as specified and directed.

Dismantling mild steel work of any description not otherwise provided for, complete all as specified and directed.

M&L Mild steel framed work Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete, complete all as specified and directed.

S&F mild steel plain black sheet 1.00 mm thick as in hearths,covering to door shutters , covering to door chaukhat etc cut to size edges beaded if directed, holes punched, etc complete all specified and as directed.

Demolation of Cement Concrete (Un-reinforced) of any description in exc 15 cm thick complete all as specified and as directed.

M&L for 20 mm thick cement concrete Ultra pre polished designer tiles for heavy duty floors manufactured with cement, blue metals, sand, chemicals and inorganic pigments as per IS – 1237 of 1980 (Re-affirmed of 1996) smooth of approved patterns and design over and including 25 mm thick cement screed bed in CM 1:4 set and jointed in neat cement slurry and pointed in white cement with admixture of pigment to match colour /shade/matrix of tiles complete all as specified and directed.

S&F in repair 18 mm/ 19 mm thick prelaminated particle board, interior grade, prelaminated both sides with decorative choice lamination for wooden and fixed with screws to timber frame as in cupboards, shutters, shelves, pelmet etc. including fixing 18 mm wide 6 mm thick beading of Ist class HW (Teak) all around, complete all as specified and directed.

S & F plain fillets square, rectangular or triangular in section, 2nd class hardwood of sectional area exc 13 & n exc 25 sqcm, clean sawn, wrought finished secured with screws complete all as specified and directed.

S&F in repair Continuous(piano ) hinges with width of flap 30 mm mild steel,bright finish or electro galvanised complete all as specified and as directed.

S&F in repair 100 mm size hasp and staple, safety type, aluminium anodized with mild steel hinge pin including bolt to hinge plate and fixed with screws, fixed in repairs, complete all as specified and directed.

M&L second class hard wood wrought as in scantling framed complete all as specified and as directed.

S&F in repair Ball catches with 8mm dia steel ball, and brass body and striking plate including letting in and fixed complete all as specified and as directed.

S & F in repairs stainless steel kitchen plate rack of size 31" x 36" x 10" of 1 mm thick stainless steel sheet with all internal fittings, and fixed to wall by means of rawl plug steel screws including washer complete all as specified and directed.

Taking down carefully aluminum/copper point wiring (light/fan/socket/power) including fittings & fixtures such as switches, socket ceiling roses, pendants, regulators etc and removing unserviceable materials from site and making good disturbed surfaces of walls/floors and reuse the serviceable fittings under respective items complete all as specified and directed.

M & L for point wiring with 1.5 Sq mm (Nominal area) PVC insulated and unsheathed 1.5 sq mm cable of 1100 Volt grade FRLS with stranded copper conductor in and including PVC conduit concealed type including continuous earth wire of 1.5 Sq mm FRLS PVC insulated, unsheathed stranded copper conductor cable and connected to common earth dolly with and including 1.6 mm thick cadmium plated sunk MS pressed steel terminal boxes with 3.0 mm thick hylam sheet cover fixed with brass screw complete with all accessories for one light point/Fan point/call bell point controlled by one ,one way switch complete all as speified and directed. Make : Finolex/Polycab/KEI Note : Cutting chases for conduits and sinkings for boxes and making good to walls, floors etc to match with existing shall deemed to be included in item rates quoted.

All as per Item No 112.00 mentioned here-in- before but for one light point controlled by two 2 way switches.

All as per item No 112.00 mentioned here-in- above but for one 3 pin 5 Amps socket out let on independent board with 1.5 sq mm PVC insulated and unsheathed copper conductor with 1.5 sq mm PVC insulated copper conductor single core for continuous earthing complete.

All as per item No 112.00 mentioned here-in- above but for one 3 pin 5 Amps socket out let on same board with 1.5 sq mm PVC insulated and unsheathed copper conductor with 1.5 sq mm PVC insulated copper conductor single core for continuous earthing complete.

All as per item No 112.00 mentioned here-in- before but for one 3 pin15 Amps socket outlet on independent board with 2.5 sq mm PVC insulated and sheathed copper conductor with 1.5 sq mm PVC insulated copper conductor single core for continuous earthing complete.

M&L for switch piano flush type single pole one way 5/6 Amp complete all as specified and directed. Make : L&T/Legrand/Havells/Anchor / Plaza

M&L for switch piano flush type single pole two way 6 Amp complete all as specified and directed. Make : Anchor / Plaza/

M&L for switch piano flush type single pole one way 15 Amp complete all as specified and directed.. Make :L&T/Legrand/Havells/Anchor / Plaza

M & L for socket outlet 2 in 1, 3 pin, 5 Amps flush type complete all as specified and directed. Make : Anchor / Plaza.

M & L for socket outlet 2 in 1, 3 pin, 6 and 15 Amps flush type complete all as specified and directed. Make : Anchor / Plaza.

M&L for switch bell push button type single pole one way 5/6 Amp complete all as specified and directed. Make : L&T/Legrand/Havells/Anchor / Plaza

M&L for bell ding dong calling type AC 230 volts single pole complete all as specified and directed. Make : L&T/Legrand/Havells/Anchor / Plaza

M & L for Lamp holder with insulated body, with back plate suitable for batten fittings complete all as specified and directed. Make : Anchor / Plaza.

M & L for ceiling rose, surfaces Bakelite three terminals complete all as specified and directed. Make : Anchor / Plaza.

M & L for stepped type electronic fan regulator 230 -250 Volts, suitable for ceiling fan of size 1200 /1400 mm sweep complete all as specified and directed. Make : L&T/Legrand/Havells/Anchor / Plaza

Supply and fixing single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB SP 20-32 Amps complete all as specified and directed.

Supply and fixing enviroment friendly indoor decorative 20 watt LED for wall mounted 20 Watt LED batten, extruded aluminium heat sink provided for heat dissipation and integrated electronic driver back plate suitable for batten fittings complete all as specified and directed. Make : Havells Cat LHEWEBP7IN1W020 or equivalant

Supply and fixing decorative wall light fitting (sub type city 2) suitable for 1x15 watt made up of polycarbonate housing with B-22 base prewired with twin core twisted flexible copper conductor with LED lamp complete with all accessories complete all as specified and directed. Make : Havells Cat LHDL03160099 or equivalant

Supply and fixing enviroment friendly 10 watt LED bulkhead fitting with pressure die cast aluminium housing, high efficient LEDs with assembly plate suitable for batten fittings complete all as specified and directed. Make : Havells or equivalant

Supply and fixing enviroment friendly indoor decorative mirror LED light fitting 1x10 watt with opal diffuser including all accessories suitable for batten fittings complete all as specified and directed. Make : Havells or equivalant

M & L sheet metal enclosure for DBs 8 way double door type with 200 amps rated busbar SPN including necessary connection complete all as specified and directed. Make : Havells/C&S/legrand/L&T

M&L for MCB TPN 415 volts 63 Amps, rupturing capacity 10 KA, B series complete all as specified and as directed.Make standard/Havells

M&L for MCB SPN 240 volts 5-32 Amps, rupturing capacity 10 KA, B series complete all as specified and as directed.

M&L for MCB SP volts 5-32 Amps, rupturing capacity 10 KA, B series complete all as specified and as directed.

M&L for wiring for submain wiring with two single core 6 sqmm (nominal area)FRLS insulated copper conductor multi stranded unseathed 1100 volts grade drawn through and including PVC concealed conduit including one 4 sqmm FRLS insulated and unsheathed copper conductor cable as earth wire connected to common earth and dolly including ctting chases in wall with making good the distrubed surfaces with 1:3 cement mortor to match the existing. Note :- 02 Run of 6 sqmm cable, 01 run of 4 sqmm cable and 01 run of PVC conduit shall be measured as one unit complete all as specified and directed.

M&L earthing complete with galvanised earthy plate electrode 600 x 600 x 6 mm thick buried directly in ground ( earth pit not less than 2.25 m deep below normal ground level ) with top edge of the plate not less than 1.5 meter below normal ground level, the earth plate surrounded by a mixture of charcoal dust and salt to a packed thickness of 150 mm on all sides with and including necessary excavation earth work returning filling in and removal of surplus soil up to 50 mtr including GI wire 4 mm dia bolted and riveted to earth plate at one end in and connected to continuous GI earth wire encased in and including 15 mm GI light grade pipe and GI medium grade 20 mm dia for watering with all fittings from top edge of earth plate complete as specified and as shown in electrical plate no 3 including testing on completion complete all as specified and directed.

Taking down ceiling/exhaust fan of any sweep after through cleaning of blades with a brush then by damp cloth dipped in soapy water to remove the remaining sticky stains and drying the same including lubricating by pouring oil, tightening all screws, ceiling plate and refixing to its original position including provision of flexible cable, connector and connection from connector to fan complete all as specified and directed.

Supply and fixing in replacement TV socket outlet piano of flush type ISI marked with valid CML No.complete all as specified and directed.Make: LegrandModel-675546or equivalent of approved make.

Painting of electric meter box panel of (18 single ph) with one coat of super enamelled paint of existing colour and marking flat numbers after through cleaning including repair/replacement of broken acrylic transparent glass complete all as specified and directed.

Supply and fixing in replacement LED lamp 9 watt ISI marked with valid CML No.complete all as specified and directed.Make: LegrandModel-675546or equivalent of approved make.

Net Contract Sum will be after deducting Sch of Credit of Rs 126844.00

PAWAN KUMAR

M/s Birja Nand

M/S Sanjay Enterprises