Loading
Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹8.5 L
EMD Value
₹10,600
Closing Date
6 Nov 2025, 10:30 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Karnataka Power Transmission Corporation Limited
Siddesh K
Extension of Control room Building at 66/11KV Sub-Station Mallasandra Tumkur Tq,
KPTCL/2025-26/OW/WORK_INDENT2450/CALL-2
KPTCL/2025-26/OW/WORK_INDENT2450/CALL-2
Reserved
Other Works
Two Tender Document System(Two Cover)
KPTCL CEE Transmission Zone Office Tumkur
14 documents required · 14 mandatory
To qualify for award of this contract, each bidder in his/their name should have in the last 5 years, i.e., 2020-21, 2021-22, 2022-23, 2023-24 & 2024-25. B. Satisfactorily completed as a prime contractor for at least any construction work to an extent of 25% of amount put to tender for the Sl.No: 6, 8, 11, 12, 14, 15, 17, 18, 19 & 20 works in any one of the above FY in any Government / Public undertaking sectors. Certificates should be issued from the cadre not less than the rank of the Executive Engineer with office outward number and date.
The bidder shall be Class-IV (of appropriate divisions) and above KPWD registered contractors
Achieved in at least One financial year a minimum financial Turnover (in all classes of civil engineering construction works only) of Rupees not less than the value of work for Sl.No: 6, 8, 11, 12, 14, 15, 17, 18, 19 & 20 works. Turnover certificate duly certified by the Chartered Accountant with UDIN number along with P&L statement should be uploaded.
The bidder should furnish GST Registration Certificate.
The bidder should furnish Income Tax Registration Certificate and returns filed for last Three Years.
Financial status and capacity supported by a letter of credit/solvency certificate/Bankers certificate issued by the Nationalized/Schedule banks of not less than 30% of amount put to tender, the date of line of credit/solvency certificate is obtained after this tender notification date, is only allowed.
Eligible Tenderers will be qualified only if their available tender capacity is more than the total tender value. (Refer Standard Tender documents Section:-A General- Instructions to Tenderers (ITT)-3.1)Tender capacity should be more than the estimated value of number of tenders participated.
The bidder should provide detailed information on any No-litigation or arbitration arising out of contracts completed or under execution by it over the last five years in any organization. A history of awards involving litigations against the bidder or any part or JV (Joint Venture) may result in rejection of bid by duly mentioning the Date after the publish of this notification with Original signature (Xerox copy of the signature will not be considered)
Bidder should upload the sufficient documentary proof for the reservation of SC/ST/CAT-I/CAT-II(A) Category issued by revenue department with RD number and same will only be considered by this office (will be checked in the website www.Nadakacheri.karnataka.gov.in).
The bidder should furnish the statements showing the value of existing commitments and on-going works as well as the stipulated period of completion remaining for each of the works listed & should be countersigned by the Employer in charge, not below the rank of an Executive Engineer or equivalent. If no existing commitments / ongoing-works, a Nil certificate shall be uploaded.
The bidder shall be EPF holder and should furnish EPF Registration Certificate.
The bidder shall be ESI holder and should furnish ESI Registration Certificate.
The bidder should submit the certificate indicating the domicile of the State of Karnataka for more than 10 years issued by revenue department with RD number and same will only be considered by this office (will be checked in the website www.Nadakacheri. Karnataka.gov.in).
The Tenderer has to visit the site at his own expense and risk to examine the site and its surrounding area, since the work spot is in and around the Power Switch Yard. A Self-Declaration should be uploaded regarding site visit done.
₹500
₹10,600
23 Oct 2025
23 Oct 2025
8 Nov 2025
29 Oct 2025
Extension of Control room Building at 66/11KV Sub-Station Mallasandra Tumkur Tq,
Demolishing brick work manually by mechanical means including stacking of serviceable material and disposal of unserviceable material to the appropriate disposal area as per direction of Engineer in c...
Earth work excavation by manual means for drains, canals, waste weir, draft, approach channels, key trenches, foundation of Buildings and bridges and such simillar works in all kinds of soils, as per ...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite, trap, basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Cod...
Providing and laying in position Cement Concrete for all Foundation works. The granite, trap, basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with su...
Addendum IPercentage Additionalities for Formwork,Centering and Scaffolding RCC Isolated footings 8%.
Addendum I Percentage Additionalities for Formwork,Centering and Scaffolding RCC Coloumns up to plinth 70%.
Addendum I Percentage Additionalities for Formwork,Centering and Scaffolding RCC plinth beams 50%.
Providing Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1 6 12 (1 cement 6 coarse sand 12 graded stone aggregate 20 mm nominal size) upto...
Providing Size Stone masonry with hard stone in foundation and plinth with Cement mortar 1 6 (1 cement 6 coarse sand)
Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite, trap, basalt crushed graded coarse aggregates and fine aggregates as per relevant ...
Providing Flush, Ruled pointing Pointing on stone work with cement mortar 1 3 (1 cement 3 fine sand) after raking joints to depth nicely lining, including cost of materials, labour, curing as per spec...
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...
Addendum I Percentage Additionalities for Formwork,Centering and Scaffolding RCC Columns,Shaft (Slip Centering) 70%.
Addendum I Percentage Additionalities for Formwork,Centering and Scaffolding RCC Beams, Lintels and Troughs of Aqueducts 60%.
Addendum I Percentage Additionalities for Formwork,Centering and Scaffolding Chejjas, Canopy and Other Architectural projections of minor sections 45%.
Addendum I Percentage Additionalities for Formwork,Centering and Scaffolding RCC Roof Slabs 50%.
Supplying, fitting and placing TMT FE 550 or 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping or welding joints, ...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works and super structure works of bridges upto 3.50 m height. The granite, ...
Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1 6 (1 cement 6 coarse sand) incl...
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel...
Providing and fixing of 2.5 track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elas...
Providing 12 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, in...
Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removi...
Providing 20 mm cement plaster of mix :1:6 (1 cement: 6 fine sand) to brick/stone masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, includi...
Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 m...
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per sp...
Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops an...
Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied at 1.67L/10 m over and including priming coat of exterior primer applied at 2.20 kg/10 m) with paint of...
Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two coat applied at 0.90L/10 m over an under coat of primer applied at 0.80 L 10 m of approved brand and manufacture includi...
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS 5382, leaving 10 mm gap for thermal expa...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...
Providing and fixing Structural Steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of appro...
Short point up to 3Mtr from tapping point to out let via switch box
Medium point above 3Mtr up to 6Mtr from tapping point to out let via switch box
Long point above 6Mtr up to 10Mtr from tapping point to out let via switch box
Concealed Conduit System Supplying heavy gauge PVC conduit pipe 25mm dia 2mm thick
Supplying heavy gauge PVC Conduit Pipe 19/20mm dia 2mm thick
Supplying 6A flush type socket and 6 A flush type SP switch . 6A 2 Way
Supplying 6A flush type socket and 6 A flush type SP switch 6A 3/5 Way
Supplying and fixing of modular switch andconnected accessories on existing modular switch plate as per IS 3854 and IS1293.32A DP SwitchV
Supplying and fixing of modular switch and connected accessories on existing modular switch plate as per IS 3854 and IS 1293.6/16A Universal Socket
Supplying and fixing of modular switch and connected accessories on existing modular switch plate as per IS 3854 and IS 1293. TV/ Telephone Socket
Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...
Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...
Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...
Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 1...
Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 4...
Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall ...
Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 8...
Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 1...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...
Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipments on the meter board using 40mm dia 2.90mm thick GI pipe 2.5 mtr long buried in a pit. The pit shoul...
Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc, for operation on 230V,50cycles. Single phase AC supply conforming to ISS-374-1979 and with double ball bearin...
Fixing a ceiling/wall mounting fan of all capacities and all types, with necessary clamp sand S hook madeout of 15mmdia MS rod, with 5A. ceiling rose of approved quality with necessary length of 23/0...
Earth work excavation for pipeline trenches in all kinds of soils by mechanical means as per drawing and technical specifications, including setting out, construction of shoring, strutting, barricadin...
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
FINAL Roads & ECRB KW-1 20 WORKS.doc
Tender Document • 0.81 MB
CC Roads NIT -kw-1.pdf
Others - NIT • 2.44 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .