GE(S) BTD 06 OF 2024-25 PROVISION OF CERTAIN LBW AND MINOR WORKS UNDER AGE BR I AND AGE EM IV UNDER GE (SOUTH) BATHINDA AT BATHINDA MILITARY STATION

Amount

Surface excavation in soft/loose soil n.exc 30 cm deep but averaging 15cm deep complete all as specified and directed.

M&L PCC 1:4:8 type D-2 using 40mm graded crushed stone agg for foundations, filling & mass concrete in manholes etc complete all as specified and directed.

S & F machine pressed precast concrete interlocking paver block any shape and size confirming to SI 15658-2006 of 80 mm thickness, M-40 grade with grey cement and no pigment complete all as specified and directed.

M&L for 25mm thick sand filling under interlocking tiles including watering and consolidating complete all as specified and directed.

M&L cement concrete type B1, 1:2:4 mix (20 mm stone aggregate) as in bedding, benching, of manhole, coping etc complete all as specified and directed.

Removing excavated earth at a level n exc 1.5 m above the starting point to a distance n exc 50m complete all as specified and directed.

M&L for hard core of gauge n.exc .63 mm deposited spread, levelled, watered well rammed to a uniform smooth surface n.exc 15 cm thick using broken stone or boulder complete all as specified and directed.

M&L for providing factory made precast cement concrete (1:2:4) type B1 (using 20mm graded stone aggregate) as in kerb stone, quoin blocks, apex stones etc., set in cement mortar (1:4) including formwork weathering, slighted rounded or chamfered angles throating etc. including necessary earth work complete all as specified and directed.

M&L for preparation of old/new decorated plastered or concrete surfaces of any description not otherwise described over 10 cm width or girth and applying two coat of pavement / kerb marking paint as per IS: 164 in different tint complete all as specified and directed.

Excavation in trenches n.exc 1.5m wide & n.exc 1.5m deep for foundation, etc. or for shafts, wells, cesspits, manholes, etc. not exc 10 Sqm on plan and not exc 1.5 m depth & getting cut in soft/loose soil complete all as specified and directed.

Returning filling in including spreading, leveling, watering & well ramming in layers not exceeding 25cm thick complete all as specified and directed.

Removal of excavated material to a distance not. exceeding 50m & depositing where directed at level not exceeding 1.5m above the starting point complete all as specified and directed.

M&L PCC 1:2:4 type B-1 using graded stone aggregate at manhole bedding & coping complete all as specified and directed.

M&L for RCC (1:2:4) type B-1 (using 20 mm graded stone aggregate) for slabs supported on walls, shelves, beams and columns, lintels, fins, facia and Chajjas etc and the like, complete all as specified and directed.

Formwork for rough finished surfaces to soffit of suspended slab such as roof slab, floor slab/chajjas/beams/colns/fins/facia and spiral stair case not exceeding 200mm tick complete all as specified and directed.

M&L for TMT bars 8mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L brick work with sub class `B' bricks straight or curved on plan exc 6.0m mean radius built in cement mortar 1:4 complete all as specified and directed.

M & L 15 mm thick rendering in CM (1:4) on any faces of brick work or concrete surfaces and finished even and smooth without using extra cement complete all as specified and directed.

Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; side hung gates for ornamental and intricate design similar work conforming to Fe.290.Gde-E-165 hung as gate including pintle hinges , stops and hand made sliding bolts complete all as specified and directed.

S & F GI tubing medium grade with all fittings and fixed to walls or laid in floors etc. bore of pipe 50 mm complete all as specified and directed.

M & L for stainless steel framed work of Pipes, hollow square/rectangular sections, angles, Tees, flat including gusset plates etc and welding and or riveting etc as required, as in frame work for sign boards, railings, grills and other similar work, etc; complete all as specified and directed.

Excavation over areas not exceeding 1.5 mtr deep in soft/loose soil and getting out of soil complete all as specified and directed.

M & L for PCC 1:2:4 type B-2 using 40mm graded crushed stone aggregates as in foundation filling, sub-base and mass concrete complete all as specified and directed.

M&L RCC M-25 design mix in foundation, including rafts, footings, foundations beams, plinth beams, bases for columns etc ; basement slab, under reamed piles and mass concrete complete all as specified and directed.

M&L RCC M-25 design mix as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like, lintels and the like, complete all as specified and directed.

M&L RCC M-25 design mix as in Beams, cantilevers, bressummers lintel over 1.5 m span complete all as specified and directed.

Use and waste of form work to sides and soffits of floor or roof beams, beams haunching girders bressummers lintels cantilevers shelves including support over hangs etc also splays between floors and beams etc for flat faces of concrete complete all as specified and directed.

Use and waste of form work to sides of concrete flats and similar work exc 10 cm but not exceeding 20 cm wide for rough finish surface complete all as specified and directed.

M & L Brick work built in CM 1:6 with sub class 'B' bricks straight or curved on plan exceeding 6 m mean radius complete all as specified and directed.

M&L for non skid ceramic coloured tiles joint free, in floors etc., 7 to 8 mm thick set and jointed in neat cement slurry and pointed to match including 15 mm thick screed (1:6) as in floor etc, area exc 0.11 sqm but n.exc 0.18 sqm complete all as specified and directed.

M&L for ceramic glazed coloured tiles joint free 450x350x7 mm thick in skirting/dado etc set and jointed in neat cement slurry and pointed to match the surfaces etc, over and including10mm thick plaster in CM 1:4, complete all as specified and directed.

M&L for 15mm thick rendering in cement mortar (1:6)(internally) finished even and smooth without using extra cement complete all as specified and directed.

M&L for 5 mm thick cement plastering on ceiling in cement mortar (1:3) finished even and smooth without using extra cement complete all as specified and directed.

M&L for three coats of white wash on ceiling including preparation of new plastered surfaces complete all as specified and directed.

M & L two coats of cement base paint including preparation of newly plastered surface over a coat of primer complete all as specified and directed.

Supply only water proofing compound complete all as specified and directed.

M & L for applying bitumen primer @ 0.5 kg/sqm on cleaned surface complete all as specified and directed.

Cutting grooves in brick wall, 75 mm wide and 65 mm deep and shaping horizontal face of groove with cement concrete 1:2:4 type B1 and finished the surface in CM 1:3 complete all as specified and directed.

S & F APP based polymeric membrane minimum weight not less than 3 kg/sqm and minimum 3 mm thick reinforced with polyester non wove fabric land on primed surfaced by forced application as per manufacturers instruction and complete all as specified and directed.

Cement concrete tiles 25cm x 25cmx 20mm thick, machine pressed set jointed and pointed in neat cement slurry in floors and cut and polished complete all as specified and directed.

M & L 75mm thick, cement concrete 1:3:6, type C2 (40mm graded aggregate) as in floors, plinth protection, paths, etc and finishing top surfaces even and smooth (without using extra cement) complete all as specified and directed.

S&F over head water tank 1000 Ltrs Capacity rotational moulded polythene water storage tank (Cylindrical vertical with closed top) fixed in position complete all as specified and directed.

S&F ball valve of PTMT high pressure with polythene float and complete 20 mm bore for iron pipe or brass and fixed complete all as specified and directed.

S&F 20 mm Gun metal gate valve with iron wheel head screwed both ends for iron pipe and fixed to 20 mm bore pipe complete all as specified and directed.

S&F stop valve of CP any colour screwed for iron pipe and fixed 15 mm bore complete all as specified and directed.

S & F in repairs 15mm bore, fancy type , chromium plated, angle valve, cast copper alloy, screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe complete all as specified and directed.

S&F CP pillar tap fancy type cast copper alloy of 15 mm bore, screwed down high pressure for iron pipe complete all as specified and directed.

S&F PVC connection 15mm bore 450 mm long with PTMT nuts complete all as specified and directed.

S&F wash hand basin of size 550 x 400 mm vitreous China white flat back including brackets, CP waste fittings & PTMT bottle trap, etc complete all as specified and directed.

S&F vitreous china wash down water closet pan (pedestal pattern), white, including connection to drain (or outgoing pipe) and to flushing pipe, ant-syphonage pipe, etc. complete all as specified and directed.

Vitreous China Urinal, full stall type, white (excluding flushing cistern, flush pipe and waste pipe etc. complete all as specified and directed.

S&F looking mirror 600 x 450 with aluminum frame complete all as specified and directed.

M &L sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf & CP bracket guard complete all as specified and directed.

S&F cast iron nahani trap 75 mm dia with CP grating including jointing to waste pipe complete jointed in cement mortar complete all as specified and directed.

S&F cast iron sand cast 75 mm size soil waste or vent pipe without ears with cement joint laid in wall/floors/trenches complete all as specified and directed.

S&F cast iron sand cast 100mm size soil waste or vent pipe without ears with cement joint laid in wall/floors/trenches complete all as specified and directed.

S & F 75mm PVC bends of any radius complete all as specified and directed.

S&F Cl bend 100 mm bore with heal rest complete all as specified and directed.

S&F 100 mm bore, CI branch pieces single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches complete all as specified and directed.

S&F Cl cowl 100 mm bore complete all as specified and directed.

M & F salt-glazed stoneware gully trap square mounted etc S type 150 x 150 mm size complete all as specified and directed.

S&F CP grating 150 mm size square fixed on gully trap etc complete all as specified and directed.

S&F GI tubing medium grade galvanised with all fittings and fixed complete to wall and ceiling or laid in floors 15mm bore complete all as specified and directed.

S&F GI tubing medium grade galvanised with all fittings and fixed complete to wall and ceiling or laid in floor/trenches 20 mm bore complete all as specified and directed.

S & F for factory made solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet, reinforced with MS square tube fixed in opening complete as per specifications & drawing complete all as specified and directed.

S & F for 30 mm thick factory made solid panel PVC door shutter conforming to criteria of testing as per IS : 4020, consisting of frame made out of MS tube of 19 gauge thickness & size 19x19mm for stiles and 15x15mm for top & bottom rails MS frames shall have a coat of red oxide primer of approved make and shall be covered with 5mm thick heat moulded PVC `C' channel of size 30x50mm forming styles and 5mm thick 75mm wide PVC sheets for top rail lock rail and bottom rail on either side and 10mm (5mmx2) thick 20mm wide cross PVC sheet as gap insert for top rail and bottom rail paneling of 5 mm thick PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rail with 30 mm wide x 5 mm thick PVC sheet beading on either side and joined together with solvent cement, adhesive and an additional 5 mm thick PVC strip of 20 mm width is to be struck on the interior side of 'C' channel using PVC solvent adhesive complete as per manufacturers specifications & drawings etc complete all as specified and directed.

S & F for aluminum anodised butt hinges 100mm long best quality complete all as specified and directed.

S & F aluminum anodised barrel tower bolt best quality, 150 mm long complete all as specified and directed.

S & F aluminum anodised door handles, best quality, 150 mm long complete all as specified and directed.

S&F for steel windows/ventilators with side hung shutters including projecting type hinges with steel handle and steel peg stay complete with glazing bars, dovetailed or welded, complete all as specified and directed.

S&F for 3 mm thick pin head glass and glazing with oil putty in square nexc 0.5 sqm in each pane complete all as specified and directed.

S & F 15 mm bore chromium plated bib taps with wall flange, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S&F PVC pipes 4.0 kg/Sqcm single socketed in any length with rubber ring joints fixed to walls 110 mm bore complete all as specified and directed.

S & F soap dish stainless steel , complete all as specified and directed.

S & F brass chromium plated tubular towel rail, 20mm dia, D type 60cm long between flanges complete all as specified and directed.

Machine pressed pre-cast concrete interlocking paver block any shape and size confirming to IS 15658-200 of 60 mm thickness, M-35 Grade complete all as specified and directed.

M&L for 75mm thick cement concrete type D2 1:4:8 (40mm graded stone aggregate) as in subfloors, sub bases, path and pavings etc complete all as specified and directed.

M&L for sand filling under interlocking tiles including watering and consolidating complete all as specified and directed.

M&L for PCC 1:3:6 type C-2 using 40 mm graded stone agg to drain pipe including packing under and haunching against the side of pipe 150 mm dia (internal) after these are laid in trenches complete all as specified and directed

M&L for 150 mm dia (internal) SGSW pipes of grade ‘A’ laid in trenches and jointed complete all as specified and directed

S & F PVC valveless, symphonic action type flushing cistern 10 ltr capacity, low level, with inlet ball valve, float and handle including brackets, PVC bend long type and connection to flush pipe of any size and pattern complete all as specified and directed.

S&F PVC bends 110 mm bore any radius complete all as specified and directed.

INTERNAL ELECTRIFICATION

S&F decorative LED post top lantern for 360 drgree indirect light, IP 65 protection resistant to impact and corrosion, glare free suitable for outdoor installation weather proof 40 watt capacity cool day light fitting complete all as specified and directed.

S & F LED bollard, pressure die cast powder coated housing with PC diffuser efficient high output COB LED for garden, pathway etc, IP 66 protection 10 watt capacity suitable for single phase, 230/240 volts, 50 Hz Ac supply complete all as specified and directed.

Supply, laying and testing cable XLPE Insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 10sqmm 2 core complete all as specified and directed.

Excavation in trenches in hard/dense soil, not exc 1.5 mtr wide n exc 1.5 mtr in depth; for foundation, laying pipes/elect cables etc, and getting out complete all as specified and directed.

Supplying and laying un-reinforced precast concrete cable cover, class LV Type-1, flat, size 250mm x 150mm x 40mm, ISI marked, laid flat across the cable length complete all as specified and directed.

S & F sheet metal encloser single door 2 way SPN 230V ISI marked IP 43 complete made out of CRCA steel sheet factory made complete all as specified and directed.

S & F 6Amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning complete all as specified and directed.

M & L for stainless steel pipe medium grade duly finished 40/50mm dia for post top lantern stand complete all as specified and directed.

S & F PVC Insulated & PVC round sheathed 3 core 1.5 Sqmm Copper Conductor Flexible cables for voltage grade upto 1100V complete all as specified and directed.

M & L for PCC 1:3:6 type C1 (using 20mm graded hard stone aggregate), casting in cube of size 200mm x 200mm x 200mm using necessary from work for fixing GI pipe stand complete all as specified and directed. (Note:- Quoted rate deemed to be inclusive cost of form work complete.)

Note:- Net contract sum shall be calculated after deduction of Sch of credit.

P K BANSAL CONTRACTOR

Lovneesh Jindal Contractor

SIDHU CONSTRUCTIONS

SWARN SINGH AND CO.

NAIB ENTERPRISES

M/s HANS BROTHERS

M/S GOYAL BUILDERS