GE (N) P/TOKEN- 40 OF 2024-2025 SPL REPAIRS TO BLDG NO 11 (DAAL SHED) AT 64 COY ASC (SUP) TYPE C AND PROVN OF PARKING SHED FOR TRUCK FIRE FIGHTING (TFF LARGE MK-IV) AT 64 COY ASC (SUP) TYPE C IN THE AREA OF AGE B/R (CENTRAL) UNDER GE (NORTH) PUNE

Amount

Dismantling Single layer Mangalore Pattern or similar tiles in roofing and rubbish off the premises complete all as specified and as directed.

Material and labour for roof tiles Mangalore pattern interlocking at side joints, laid dry in roofing complete all as specified and as directed.

- Ditto- all as per serial item No 2 here-in-before but using Mangalore pattern roof tiles obtained from dismantling in sl item No 01 above

Material and labour for ridge or hip tiles to suit Manglore pattern of roofing tiles,bedded and jointed in cement mortar (1:4) etc complete all as specified and as directed.

Dismantling tile battens, spaced at spacing exc 15cm centres to centres fixed with nails complete all as specified and as directed.

Dismantling wooden scantling of section 40 sqcm and over at any position complete all as specified and as directed.

Material and labour for 2nd class hard wood, clean sawn, in scantling as in timber work complete all as specified and as directed.

Material and labour for 2nd class hard wood, Wrought finish, in scantling as in timber framed and fixed in position work complete all as specified and as directed.

- Ditto- all as per serial item No.08 here-in-before but except timber.

S & F of mild steel work as in Roof battens, rafters etc and similar work complete using ERW or induction butt welded tubes conforming to IS1161-1998 grade ST.-240, fixed independently shelf tapping screw and in iron cleats etc complete all as specified and as directed.

M&L for preparation of New steel surfaces of any description over 10cm girth or width and applying Two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.

Dismantling plain or corrugated steel sheeting , any gauge or any thickness, as in roof coverings complete all as specified and as directed.

Supply and fix 0.63mm thick galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with 'J' Bolts and washers, in roofs, walls etc with grade of zinc coating 120gms/ Sqm complete all as specified and as directed.

Supply and fix in repairs 0.56mm thick plain, Aluminium sheeting, alloy 31000H4 in ridges, hips, valley gutter, crumple joint, drip and straight flashing (length and girth as fixed) complete all as specified and as directed.

M&L for PCC (1:2:4) type B1 (using 20mm graded stone aggregates) as in roof kerbs or mud stops rounded or chamfered on edges and as in Coping and similar work complete all as specified and as directed.

M&L for Eves/Weather Boarding of AC Sheet 12 to 15mm thick, any size and shape including taking down existing board complete all as specified and as directed. Make: Shera wall/Everest/ V-board/Charminar or Eqvt.

Taking down chowkats or frames with shutters (without taking off shutters from frame) area not exc.1.5 sqm each complete all as specified and as directed.

M&L for aluminium powder coated louvered ventilator with provision of exhaust fan opening using ‘Jindal” aluminium section including 3 mm thick glass strips and stainless steel wire mesh 0.36 mm nominal dia of wire and average width of aperture 1.40 mm etc complete all as specified and directed by Engineer-in-Charge. Section - 63 x 25mm, No- 14001of Jindal Company.

M&L for mild steel framed work such as grill, grating etc with ends of bars shouldered or rebated or forged into spike framed guard bars barred iron doors, ladders, framed baluster, walk way, railing; frame work, including pintle hinges, stops, hand-made sliding bolts etc,sliding channels for sliding of gate and similar work conforming to Fe 290 Gde-E-165 complete all as specified & as directed.

Demolition of cement concrete in ground floors , pavings, sunken floor etc (below or above ground level) and rubbish off from the premises complete all as directed.

Material and labour for 75mm thick PCC (1:4:8) type D2 (using 40mm graded broken stone aggregate) as in sub base complete all as specified and as directed.

Material and labour for 75mm thick PCC (1:3:6) type C2 (using 40mm graded broken stone aggregate) as in plinth protection finishing the surface even and smooth without using extra cement including demolition complete all as specified and as directed.

M&L for Machine cut kota stone 20-25mm thick over cement screed bed 20mm thick in CM (1:6) laid and jointed with grey cement slurry and pointed with grey cement and pigment to match the shade of the slab including rubbing and polishing complete (mirror polish) as in flooring/steps /slabs complete all as specified and as directed.

M&L for Machine cut kota stone 20-25mm thick over 10mm thick backing coat in CM (1:4) laid and jointed with grey cement paste and pointed with grey cement and pigment to match the shade of the slab including rubbing and polishing complete (mirror polish) as in riser of steps/Skirting/dado and pillar complete all as specified and as directed.

Dismantling of stone masonry in cement mortar and in any position complete all as specified and as directed.

M & L for stone walling of Random rubble, uncoursed, well bonded, bedded and solidly hearted, built in cement mortar 1:6 complete all as specified and as directed.

- Ditto- all as per Srl item No. 26 above but except stones

Taking down cement plaster on brick/ stone walling including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed.

Material and labour for rendering 15mm thick in cement mortar (1:6) on fair faces of on stone wall or brick work or concrete surfaces and finished even and smooth without using extra cement complete all as specified and as directed.

Material and labour for preparation of New plastered wall surface and applying two coats of oil emulsion distemper over a coat of alkali reistant primer over a thin layer (1 to 1.5mm) complete all as specified and as directed.

M&L for preparation of old steel surfaces of any description over 10cm girth or width and applying two coats of synthetic enamel paint over a coat of Red Oxide Primer complete all as specified and as directed.

M&L for preparation of wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint over one coat of pink primer complete all as specified and as directed.

Dismantling structual steel work including doors, gates, rolling shutter, weldmess but excluding framed trusses etc complete all as specified and as directed.

M&L for 1mm thk Steel Rolling shutter without ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer, erected in position as indicated complete but gear operated type with bevel gear box and crank handle complete all as specified and as directed.

M&L for ball bearing for rolling shutter complete all as specified and as directed.

Supply and fix in repairs aluminium powder coated three track sliding window with two glazed shutters, one 4mm thick float glass ordinary quantity and one shutter of stainless steel wire mesh 0.36 mm dia wire and 1.40mm aperture including good quality of bearing handle, locks, PVC rubber lining etc complete all as specified and as directed. Catlouge numbers of Jindal company or equivalent make as specified. Sections of Jindal company : Three track bottom – 20957, Three track top/vertical – 20958,Handle – 20606, Interlocking – 20605, Top and bottom – 20604.

Material and labour for 2nd class hard wood cover fillets, bull nosed, splayed, chamfered or rounded on one edge or face, wrought, secured with fevicol and nails, sectional area exc. 6 Sq.cm but not exc. 13 Sq.cm complete all as specified and as directed.

S&F Welded steel wire fabric supplied and fixed complete to wood or steel members, weight per square meter n.exc 4 Kgs complete all as specified and as directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in hard/ dense soil complete all as specified and as directed.

M&L for Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in Hard/ Dense soil complete all as specified and as directed

M&L for Surface excavation n.exc (not exceeding) 30 cm deep and averaging 30cm deep and getting out in Hard/ Dense soil complete all as specified and as directed

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in soil complete all as specified and as directed.

Removing excavated soil to a distance exc. 1.50 km but n exc. 5 km and depositing complete all as specified and as directed.

Material and labour for PCC (1:4:8) type D2 (using 40mm graded broken stone aggregate) as in foundation, filling and mass concrete complete all as specified and as directed.

M&L for Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter rough finished complete all as specified and as directed.

M&L for Formwork to sides of pillars, posts, struts, piers, columns and stanchions rough finished complete all as specified and as directed.

M & L for RCC (1:1.5:3) mix type A1 (using 20mm graded stone aggregates) as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and as directed.

M&L for RCC (1:1.5:3) mix type A1 (using 20mm graded stone aggregates) as in Columns, pillars, piers, posts and struts complete all as specified and as directed.

M&L for Mild steel TMT bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed

M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed

Supply and fix rolled mild steel roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. conforming Fe 410-W(Gde-E-250) quality -B complete all as specified and as directed.

S&F for rolled mild steel Compound girder and stanchions, lattice girders, aerial masts, staging for water tanks and the like including Caps, bases, splices etc. built up from two or more beam or channel sections or angles with plates, including all lattice bars, stiffeners, gusset plates etc conforming to Fe 410-W(Gde-E-250) quality -B complete all as specified and as directed.

S&F mild steel plates (plain or chequered) channels, square cut and notched (ordinary and counter sunk) forming holes without any attachment of Gde Fe-290 Gde E-165 complete all as specified and as directed.

Supply and fix for 0.50mm thick pre-painted galvalume aluminium zinc coating (AZ-150) GI based corrugated steel sheet of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall fixed with self tapping screws with two corrugation side lap complete all as specified and as directed.

Supply and fix for 0.50mm thick pre-painted galvalume aluminium zinc coating (AZ-150) GI based plain steel sheet of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall fixed with self tapping screws with two corrugation side lap complete all as specified and as directed.

Material and labour for preparation of new steel or iron surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.

M&L for Hardcore of Broken stone of gauge n. exc 63 mm deposited, spread and levelled in layers n exc 150 mm thick, watered and rolled / rammed to a true surface complete all as specified and as directed.

Material and labour for machine pressed precast cement concrete coloured interlocking tiles, paver block, glossy, any shape and size as approved, 80mm thick, conforming to IS 15658-2006, M-40 with grey cement and pigments grade in floor/ pavement laid over and including 25mm thick sand cushioning laid dry to the profile including vibrating with surface vibrator after laying of tiles complete all as specified and as directed.

Material and labour for rendering 15mm thick in cement mortar (1:4) on fair faces of brick, block masonry or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed.

Material and labour for preparation of newly plastered surfaces of walls and applying two coats of cement base paint over a coat of cement primer complete all as specified and as directed .

Taking down carefully aluminium point wiring (light, fan, socket or power), complete (fitting such as switches,ceiling rose, pendent, regulators etc) removing material to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately and making good disturbed surfaces of wall by plastering disturbed surface smooth by applying two coats of same colour paint as existing, floor etc. complete all as specified and as directed.

Taking down the existing unserviceable main switch / cut out / DBs of any type / capacity / description as existing at site including MCBs any type and capacity making good the disturbed surfaces by plastering disturbed surface smooth by applying two coats of same colour paint as existing to match with the existing finishes complete all as specified and as directed.

Taking down the existing unservicable sub main wiring of any type / description as existing at site including making good the disturbed surfaces by plastering disturbed surface smooth by applying two coats of same colour paint as existing to match with the existing finishes complete all as specified and as directed.

M & L for Point wiring using approved colour coding as per IS, with multistranded copper conductor 1.5 Sq. mm (nominal area), two single core, PVC insulated and unsheathed FRLSH cable 1100 volts grade, ISI-694 marked drawn through in and including heavy duty, PVC casing caping including all accessories etc, heavy duty ISI marked, with mild steel sunken boxes 1.6 mm thick, 60 mm deep with earth dolly duly, covered with hylem sheet cover 3 mm thick, ISI marked suitable for fixing of switches, fan regulators and sockets including PVC insulated multistranded copper conductor 1.5 Sqmm (nominal area) single core FRLSH cable as earth continuity conductor to common earth with copper lugs complete and connecting to earth dolly complete all as specified and directed for the following :-

(a) One light point controlled by one, one way switch 5 Amps

(b) One fan point/ exhaust fan point controlled by one, one way switch 5 Amps and regulator

(c) One 3 pin 5 Amps switch socket outlet point controlled by one switch on independent board.

(d) One 3 point 5 Amps switch socket outlet point controlled by one switch on the same board.

All as per item No.64 above but with multistranded copper conductor 2.5 Sq mm (nominal area), single core, PVC insulated and unsheathed multistranded FRLSH cable 1100 Volt grade ISI-694 marked for 3 pin, 15 Amp socket outlet, independent, including PVC insulated multistranded copper conductor 2.5 Sqmm (nominal area) single core FRLSH cable as earth continuity conductor to common earth with copper lugs complete and connecting to earth dolly.

S & F for Switch piano flush type, single pole, one way, and 5 Amp complete all as specified and as directed.

S & F for Switch socket combination, 2 in 1, 3 pin 5 and 15 amp flush type universal complete all as specified and as directed.

S & F for Socket outlet multipurpose having provision for 3 pin, 5 Amp and 2 pin, 5 Amp, piano flush type complete all as specified and as directed.

S & F ceiling fan regulator socketed, step type, flush type heavy duty, 120 watts suitable to work on 230 volts Ac supply complete all as specified and as directed.

M & L for Sub main wiring with approved colour coding as per IS with two single core PVC insulated FRLSH cable with multistranded copper conductor of size 4.0 Sq mm nominal area and drawn through PVC non metallic rigid PVC heavy duty conduit/casing caping as per site requirement and its accessories including one run of PVC insulated 2.5 Sq mm (nominal area) multistranded copper conductor FRLSH cable as earth wire and connected from DB to DB/ main board complete all as specified and as directed.Note:- Two runs of 4 sqmm cable,one run of 2.5 sqmm cable and one run of heavy duty conduit/casing caping as per site requirement and accessories will be measured as one unit complete all as specified and as directed.

M & L for Sub main wiring with approved colour coding as per IS with four single core PVC insulated FRLSH cable with multistranded copper conductor of size 6.0 Sq. mm nominal area and drawn through PVC non metallic rigid heavy duty conduit/casing caping as per site requirement and its accessories including one run of PVC insulated with 4.0 Sqmm (nominal area) multistranded copper conductor FRLSH cable as earth wire and connected from DB to DB/ main board complete all as specified and as directed.Note:- four runs of 6 sqmm cable,one run of 4 sqmm cable and one run of heavy duty conduit/casing caping as per site requirement will be measured as one unit complete all as specified and as directed.

S & F for for wall/ceiling mounted LED batten tube 20 watts light fitting, 230 volts with out put of 2000 lumens with extruded aluminium housing with decorative end caps and intregrated electronic driver connector block etc complete with all accessories internally pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting including LED tube 4' x 20 watts complete all as specified and as directed.

S/F LED street light fitting 25 Watt 230V energy efficient & environment friendly type. The fitting should have powder coated, pressure die cast Aluminium housing and heat resistant toughened glass with frame having better optics for uniform distribution complete all as per Make JAQUAR Cat No LSRTO4S025XC or equivalent of make Bajaj, Philips, Havells as approved.

S & F for MCB DB VTPN 4 way with provision for FP MCB/Isolator/RCCB etc as incommer and SP/TP MCBs as out going double door IP 43 complete prewired including Bus Bar including MCCB 63 Amps 4 pole for incoming etc suitable for operation on 415 volt 50 Hz AC supply including necessary provision for inserting the DBs double door with locking arrangement in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall with existing paint colour complete all as specified and as directed . Make - Schneider/Legrand/L&T/ABB.

S & F for sheet metal enclosure MCB DB SPN 8 way with 200 Amps rated bus bar 240 volts double door with magnitic locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall with existing paint colour complete all as specified and as directed. Make - Schneider/Legrand/L&T/ABB.

S & F for MCB tripple pole and neutral rated capacity 100 Amps, 415 volts Ics/Icu 100 % breaking capacity 10 KA complete all as specified and as directed. Make - Schneider/Legrand/L&T/ ABB.

S & F for 'C' curve MCB single pole & neutral 240Volts 32/40 Amps complete all as specified and as directed.

S&F 'C' curve MCB SP 240 volt 6 to 32 Amp complete all as specified and as directed.

S & F for plastic body exhaust fan, AC single phase, 240 V of size 250 mm sweep with louvers (as per Cat Part No -698502 of Make Indo Asian or equivalent Make- Bajaj Maxima DX/ Usha Crispair )including necessary connection and replacement of flexible copper cable from ceiling rose and taking down of old unserviceable fan complete all as specified and as directed

Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) →, ISI marked including removal of old unsv fan and handed over to store yard of AGE E/M (North) complete all as specified and directed. Note : a) Quoted Rate is deemed to inclusive of Stickering/Marking/writing of MES numbers in bottom of ceiling Fan as directed by Engr-in-Charge. Make:- USHA, Heleous,Bajaj, Orient Electric I-Tome, Atomberg Effico Plus.

Supply and laying 50mm outer dia, double walled corrugated (DWC) HDPE duct pipe conforming to IS- 14930 Pt-II with antirodent and non flame propogating properties plete with fittings for cable protection complete all as specified and as directed.

Supply, lay, joint, test and commissioning of LT under ground cable 1100 volt grade , XLPE insulated and PVC sheathed heavy duty armoured with aluminium conductor , IS 7098-I Marked, Laid in trenches/ducts/fixed on poles/walls/laid under roads/paths/drains/culverts or encased in GI pipe including cable glands, lugs jointing material etc complete all as specified and directed. cable of the following size. (a) 16 Sq mm 4 Core

Earthing complete with galvanized steel earth plate electrode of size 60cm X 60 cm X 6 mm buried directly in ground (earth pit not less than 2.25m deep below the normal ground level) with top edge of plate not less than 1.5 m below the normal ground level connected to GI earth strip 32 X 6 mm dia GI earth lead as earth lead by means of bolts, nuts, check nuts and washers of galvanized iron or steel, protected by GI pipe light grade 40mm bore all as shown on electrical plate No 3 of SSR Part-I connected to earth test point electrode, PCC pit with RCC cover, funnel with wire mesh, watering pipe 20mm dia protection pipe etc and testing on completion complete all as specified and directed. Note No 1 :- The unit rate shall also include for earth work in hard/dense soil, PCC (1:3:6) type C1 chamber, RCC 1:2:4 type B-1 cover 50 mm thick reinforced with 8 mm dia TMT bar @ 150 mm c/c both ways, funnel with watering pipe 20 mm dia medium grade, GI protection pipe light grade 40 mm dia and wire mesh complete all as specified and as directed. Note No 2 :- Earthing strip and GI protection pipe beyond 7.5 m will be measured and paid separately if required

S & F for Socket outlet multipurpose having provision for 3 pin, 5 Amp and 2 pin, 5 Amp, piano flush type complete all as specified and as directed.

Note : 1. Performance security:- Refer Condition 22 of Special Conditions. 2. Quoted Contract Sum shall be arrived at after deducting the amount of Credit Schedule (refer Schedule of Credit in pdf form for quantity, rate and amount etc.) for old unserviceable materials retrieved from site.

M/s Akshay Contruction (BID ID -3218125)

Parhar Enterprise (BID ID -3216985)

SAGAR ENTERPRISES (BID ID -3217772)

A.S.ENTERPRISES (BID ID -3217874)

MANIYA CONSTRUCTION CO (BID ID -3218236)

AJINKYA VIKRAM GAIKWAD (BID ID -3217700)

M/s.BAJRANG CONSTRUCTION (BID ID -3217395)

SHREESAMARTH CONSTRUCTION (BID ID -3217835)