REPAIR TO ROAD FURNITURE AND ROAD PAINTING / MARKINGS UNDER GE WEST LUCKNOW

Amount

M&L for providing and laying 2.50 mm thick hot applied thermo plastic road marking materials in uniform thickness with glass beads as per clause No 803 of MORTH specification including cleaning of roads surface, heating the material within specified temperature limits for marking with all necessary arrangements required complete all as specified and directed.

S&F in repairs "Cat Eyes " of size width not more than 130 mm and height not more than 20 mm made out of strong engineering high impact resistant polymer with electronic welded lenses for retro reflective in dry and wet weather conditions along road complete all as specified and directed.

S & F in repair for metal road delineators made out of 75 mm bore medium grade MS pipe of length 80 cm embedded with PCC 1:3:6 type C2 using 40 mm graded stone aggregate of size 30cm x30cm x30cm using 20mm graded aggregates 30cm below road level including taking down existing corrugated/broken delineators and applying two coat of senthetic enamenal paint over one cote of zinc crome paint and fixing with high intensity prismmatic reflective tapes of 137.5 mm width red color in 2 pieces and 1 piece yellow/white colour alternatively complete all as specified and directed .

M&L preparation of external treated surfaces of concrete/ kerb stone, facias, cornices etc by removing all scale, loose material dust etc & appyling two coat of weather proof anti fungal (Apex) paint over a coat of wall care putty and applied as per manufactured instruction complete all as specified and directed.

M&L preparation of external treated surfaces of concrete/ kerb stone, facias, cornices etc by removing all scale, loose material dust etc & appyling one coat of weather proof anti fungal (Apex) paint and applied as per manufactured instruction complete all as specified and directed.

S&F in repair solar road stud having 3 LEDs of color red/yellow on a side (total 06 nos) housed in a tough pressure casted alumunium alloy of size 125mm x 125mm with built in stem of suitable length for fixing with epoxy LEDs, solar-cells, 1600mAH battery & Light sensor well protected inside under tough unbreakable polycarbonate transparent sheet roof system workable for 2-3 days (nights) after full charge in 8-10 hours complete all as specified and directed.

Taking down old sign board of any description including frame work complete all as specified and directed.

S&F with stainless steel frame including necessary clamps etc retro-reflective double sided road name signboards comprising of 4mm thick aluminium composite panel (ACP) mill finished or PDVF coated or as specified as base board, micro prismatic retro-reflective sheet and electro cut coloured overlay film. The aluminium composite panel (ACP) shall have a thickness of 4mm with 0.5 mm thick skin of aluminium on both sides. the ACP shall be routed, folded and fixed on the stainless steel frame with VHB tape, 24mm wide and 2.3 mm thick provided through out the length and breadth of the frame including riveting at the right angle face of the frame with pop riveting or with self taping SS screws 5mm dia spaced not more than 300mm center to center ensuring that no noriveting is seen on either face of the frame. On the front and back face of the ACP, micro prismatic retro-reflactive sheet conforming to Type-XI of IRC:67:2012 shall be pressure fixed as back ground sheet which will be over laid with electro cut transparent film of approved make and color to create a desired road name information message. The rate shall include all materials, labour, equipments, fabrication transportation, erection, installation and incidentals all complete as per direction of the engineer-in-charge.(Note: Stainless steel frame shall be measured and paid seprately)

S&F 50mm dia and 1.8mm thickness of wall stainless steel pipe for framing of sign board including cutting, welding and framing of stainless steel structure complete all as specified and directed

S & F in repair road safety convex mirror made of polycorbonated of size 800mm dia with prepainted MS pipe post and fixed at suiltable height as per site and fixed as per manfacturers instructions complete all as specified and directed

Excavating in post holes (or similar holes) in soft/loose soil each n exc 0.5 cum getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in the layers not exc 25cm complete all as specified and directed.

M&L for PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) as in foundation and mass fillings complete all as specified and directed.

M/s Ramesh Chandra

M/S- YASH BUILDERS

M/S SHIVA CONSTRUCTION

Matrubhoomi Construction

Sadhna Construction Company

Sabitri Jhunu Enterprise

Shivam Enterprises

acchyut trading company