Loading
Loading…
Loading…
Tender Value
Refer Docs
EMD Value
₹10,000
Closing Date
25 Aug 2026, 3:00 pm2d left
Ex. Engineer (EandM) M-10
Office of the Ex. Engineer (E and M) M-10, Inside Command Tank-1, Pocket-1, Sector-7, Dwarka
SITC of newly bore at Dwarka Sector 11 Pocket - 2 under AC-34. (Re-invite)
2026_DJB_297212_3
NIT No. 15 (2026-27)/EE(EnM)M-10
Open Tender
Miscellaneous Works
Works
Office of the Ex. Engineer (E and M) M-10
Please refer Tender documents.
2 documents required · 2 mandatory
₹500
Account No SB 06121000095461
₹10,000
19 Aug 2026
19 Aug 2026
25 Aug 2026
19 Aug 2026
25 Aug 2026
19 Aug 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1.01 | Lowering of sub p/set, sub cable, GI Pipe etc. as required, jointing of cable with pipes and jointing of D/F pipes etc. with nuts bolts and rubber packing etc. The job includes hiring of all T&P, tripod stand, chain pulley block and other material handling equipment’s, Safety gadgets as required and consumable material ( rubber packing and Nut Bolts) will be arranged by the firm as per site requirement | 1 | Job | - | - |
| 1.02 | S/O Submersible P/Set dynamically balanced S Steel impeller mounted on stainless steel shaft with protection sleeve duly fitted with flanged tail piece. The pump will be directly coupled with sq. cage sub. Induction motor of 2900 rpm suitable for operation on 3 phase, 415 volts, 50 c/s AC supply with efficiency 70% at duty point of following duties : 7.5 HP, Discharge 200-450-600 LPM, head 71-50-29 mtr. or equivalent as per site requirement. Make :- BS/SU/Skope/DJB approved makes. | 1 | No | - | - |
| 1.03 | S/O PVC insulated PVC sheathed flat submersible cable with plain copper conductor having three core 4 sq mm 415/1100V (each roll 100 mtr) Make :- Havells/Fort Gloster/ICL/CCI/ICC/Universal/Grandlay/Havells/DJB approved | 2 | Roll | - | - |
| 1.04 | Making/supply of 50mm, 3 mtr long approx double flanged (OD 130mm)GI Pipe,medium conforming to IS:1239(2004)SWS,B Class having 3 No L-Type brackets duly welded on each side of flange. The flanges having four holes and One cut for cable. Make- TATA/Jindal Hisar | 25 | No | - | - |
| 1.05 | MS clamp suitable for holding 50 mm dia GI pipe made from 600x100x12 mm thick MS plate with complete set | 1 | No | - | - |
| 1.06 | F/S of MS bore cover suitable for 300mm dia MS Pipe. The bore well be fabricated with MS flat size 50mm width 5mm thickness and MS sheet 18SWG in 2 half pieces i/c suitable clamping arrangement having internal hole as per requirement | 1 | No | - | - |
| 1.07 | GI/CI double flanged 90 degree 50 mm dia size bend | 1 | No | - | - |
| 1.08 | Supply of 50 mm dia. CI double flanged PN 1.0 NRV without bypass. Make :- IVC/Kirloskar | 1 | No | - | - |
| 1.09 | Orifice Assembly 2 feet length 50 mm dia double side flannged 2'' x 2.5 ''. Complete | 1 | No | - | - |
| 1.1 | G.I tail piece 50 mm dia 0.5 mtr. Long with one end threaded & other end flanged having 3 No L-Type brackets duly welded with flange having 4 Nos. hole & cut for cable. | 1 | No | - | - |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.36 MB
NIT15.pdf
Tender Documents • 1.34 MB
BOQ_395900.xls
BOQ • 0.25 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].