Construction of Community Hall with attached Toilet at Cheljang Joupi, Chandel dist

Amount

Excavation work by mechenical means (Hydraulic excavator)/manual means in fdn trenches or drains n. exc. 1.5m in width or 10 sqm on plan (ordinary rocks).

Providing and laying in position cement concrete of specified grade, 1:4:8 using 40mm stone agg in foundation

Brick work with moudular bricks of class designation 75 in fdn and plinth in CM 1:6

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size de rived from natural sources)

Reinforcement for RCC work incl straightening, cutting, bending, placing in position and binding all complete upto plinth level mild steel and medium tensile steel bars

M/L for 15mm thick plaster of mix 1:4 (1 Cement : 4 coarse sand)

Providing and laying in position cement concrete of specified grade, 1:4:8 using 100mm stone agg in foundation

Cement concrete flooring 1:2:4 finished with a floating coat of neat cement incl cement slurry 40mm thick with 20mm nominal size stone aggregate.

Providing wood work in frames of door, windows, clerestory windows and other frames, wrought framed and fixed in position, Sal wood

Providing and fixing panelled or panelled and glazed shutters for doors, window and clerestory windows incl ISI marked black enemelled MS butt hinges with necy screws, second class teak wood 35mm thick

Providing and fixing panelled or panelled and glazed shutters for doors, window and clerestory windows using 4mm thick float glass panes incl black enemelled ISI marked MS butt hinges with necy screws, second class teak wood 35mm thick shutter

Providing and fixing aluminum trower bolts ISI marked transparent or dyed to reqd colour or shade with necy screws etc. complete 100x10mm

Providing and fixing aluminum trower bolts ISI marked transparent or dyed to reqd colour or shade with necy screws etc. complete 200x10mm

Providing and fixing aluminum sliding door bolts ISI marked transparent or dyed to reqd colour or shade with necy screws etc. complete 300x16mm

Providing and fixing aluminum handels ISI marked transparent or dyed to reqd colour or shade with necy screws etc. complete 125mm

Providing and fixing aluminum handels ISI marked transparent or dyed to reqd colour or shade with necy screws etc. complete 100mm

Providing and fixing precoated galvanised iron profile sheets 'size, shape and pitch of corrugation as approved by Engineer-in-charge' '0.50 mm '+ 0.05 %' total coated thickness with zinc coating 120 grams per sqm as per IS 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer in- charge. The sheet shall be fixed using self drilling oblique self tapping screws of size '5.5x 55 mm' with EPDM seal, complete upto any pitch in horizontal oblique vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required

Providing ridges or hips of width 60cm overall width plain G.S. sheet fixed with polymer coated J. or L hooks, bolts and nuts 8mm dia G.I. limpet and bitumen washers complete 0.63mm thick

Structrual steel work riveted, bolted or welded in built up section trusses and framed work, incl cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Providing and fixing plain Multipurpose Cement board ( High Pressure steam cured ) as per IS : 14862, with suitable screws for fibre cement board in ceiling etc. complete (frame work to be paid separately) :6 mm thick cement board

Providing and fixing 2nd class teak wood lipping/ moulded beading or taj beading of size 18X5 mm fixed with wooden adhesive of approved quality and screws/ nails on the edges of the Pre-laminated particle board as per direction of Engineer-in-charge.

Providing and fixing in wall lining flat pressed three layer (medium density) 12mm thick particle board or graded wood Pre-laminated one side decorative lamination and other side balancing lamination Grade I, Type II, IS : 12823 marked, including priming coat on unexposed arrangement and screws etc. complete :

1 X Toilet Block with 10 user Septic Tank and Soak Pit Earth work in Surface excavation n. exc. 30 Cm depth but exc. 1.5m in width as wellas 10 sqm on plan incl disposal of excavated earth upto 50 m and lift upto 1.5m, all kind of soil.

Excavation work by mechenical means (Hydraulic excavator)/manual means in fdn trenches or drains n. exc. 1.5m in width or 10 sqm on plan ordinary rocks

Providing and laying in position cement concrete of specified grade, 1:4:8 using 40mm stone agg in foundation

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. Cement mortar 1:4 (1 cement :4 coarse sand)

15 mm cement plaster on the rough side of single or half brick wall of mix : 1:4 (1 cement: 4 fine sand)

Reinforced cement concrete work in columns, pillars, posts and struts etc. up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars

Centering and shuttering incl strutting, propping etc. and removal of form for footings

Supplying and stacking, Laying, spreading and compacting stone aggregate of specified sizesto WBM specifications in uniform thickness, hand picking, rolling with 3 wheeled road / vibratory roller 8-10 tonne capacity in stages to proper grade and camber, applying and brooming requisite type of screening / binding material to fill up interstices of coarse aggregate, watering and compacting to the required density

Providing and laying in position cement concrete of specified grade, 1:4:8 using 100mm stone agg in foundation

Providing and laying 40mm Cement concrete pavement with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including finishing complete

Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineerin- charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.

Providing and fixing 35 mm thick factory made laminated veneer lumber door shutter conforming to IS : 14616 and TADS 15:2001 (Part B), including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws, all complete as per directions of Engineerin-charge and panelling with panels of : 12 mm thick plain grade - 1, medium density flat pressed three layer particle board FPT - I or graded

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodiccoating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : 200x10 mm

Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodiccoating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : 300x16 mm

Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : 125 mm

Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests

Providing and fixing 15mm nominal bore CP brass bib cock of approved quality conforming to IS : 8931.

Providing and fixing 15mm dia nominal bore GI pipes complete and clamps, i.e. cutting and making good the walls etc.

Providing and fixing 15mm nominal bore CP brass stop cock (Concealed) of standard design and of approved make conforming to IS : 8931.

Providing and fixing on wall face unplasticised rigid PVC rain water pipes 110mm dia, single socketed pipes conforming to IS : 13595 type A incl jointing with seal ring conforming to IS; 5382, leaving 10mm gap for thermal expansion.

Providing and fixing on wall face unplasticised rigid PVC moulded 110 mm bend for un plasticized rigid PVC rain water pipe conforming to IS : 5382, Type A incl jointing with seal ring conforming to IS; 5382, leaving 10mm gap for thermal expansion

Providing and placing on terrace (at all floor levels) polythene water storage tank 500 ltr capacity ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet , outlet and overflow pipes but without fittings and the base support for tank. 500 Ltr capicity

Contruction of 10 User septic tank (RCC)

Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design. With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

10 user Septic Tank and Soak Pit Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m inwidth or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil.

Providing and laying in position cement concrete of specified grade, 1:4:8 using 40mm stone agg in foundation

Providing and laying damp-proof course 50 mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size).

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size)

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size).

Centering and shuttering including strutting, propping etc. and remova lof form for : Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.

Centering and shuttering including strutting, propping etc. and removal of form for : Suspended floors, roofs, landings, balconies and access platform

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.

Brick work with common burnt clay modular bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:4 (1 cement : 4 coarse sand)

Cement plaster 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement. 20 mm cement plaster

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 110 mm diameter

Providing and fixing of Slotted cowl (terminal guard ) 100 mm dia

PVC without Arm Chair

Wooden Table 6"4"

Services If any

CAPTAIN TRADING & CO (BID ID -3386603)

RONAK SINGH (BID ID -3393018)