WORK OF bifurcation of 11 KV overload feeder and strengthening of LT Line in the area of EDC Etah under Business Plan 2024-25 on Semi Turnkey basis.

Amount

Supply of The Line Material as per Relevent ISS :-

Stone Pad

TF Base Angle with Clamp

MS Top Channel

MS Dropper Channel

Guarding Angle

MS T off Channel with Clamp

11 KV F Clamp/F Bracket

LT PVC Cable 3.5x70/35 sq mm

LT Pin Clamp for STP

Double Pole Clamp

11 KV Fuse Set

Nut and Bolts off size

Suspension Clamp

I Hook

Dead and Clamp

Holding Clamp

3 Phase Distribution Box

3 Phase Distribution Box Clamp

GI Wire 10 SWG

Erection Work :-

Safe carriage of line material from store center Etah to pit site in distance range 0 to 60 km including loading & unloading at both ends.

Safe Carriage of 8.5 Mtr Long PCC Pole from Electricty store center Etah/nearest 33/11 KV S/S to direect Pit site in distance range 0 to 60 Kms. Including loading and unloading at both side

Safe Carriage of 11/13 Mtr Long ST Pole from Electricty store center Etah/nearest 33/11 KV S/S to direect Pit site in distance range 0 to 60 Kms. Including loading and unloading at both side

Safe Carriage of 100 KVA TF from Electricty store center Etah/nearest 33/11 KV S/S to direect Pit site in distance range 0 to 60 Kms. Including loading and unloading at both side.

Safe Carriate of following 11 KV XLPE Cable from store center Etah to pit site in distance range 0 to 60 km including loading & unloading at both ends.

11 KV XLPE Cable 3x120 sq mm

11 KV XLPE Cable 3x70 sq mm

Safe Carriate of 11 KVB VCB from store center Etah to pit site in distance range 0 to 60 km including loading & unloading at both ends.

Erection of 8.5 mtr long PCC Pole as single support including fixing of HT/LT accessories etc complete, pole should be gruted properly as per DVVNL/Respo norms.

Erection of 8.5 mtr long PCC Pole as Double Pole/Section Pole including, drilling, cutting etc and fixing of all HT/LT accessories with TPMO etc complete, pole should be grouted properly as per DVVNL/RESPO norms.

Erection of 11/13 mtr ST Pole as single support including fixing of all HT/LT accessories etc. complet, pole should be grouted properly as per DVVNL/RESPO norms.

Erection of 11/13 mtr ST Pole as Double Pole/Section Pole including fixing of all HT/LT accessories etc. complete, pole should be grouted properly as per DVVNL/RESPO norms.

Dismantling and removal of existing ACSR Weasel/GI Wire from the various area, stacking and placement their coils and their in the safer place including cost of lobour T&P etc. required for proper completion of work.

Laying sagging stringing, binding, jumpering & fixing of all accessories etc of following conductor on the newly/old erected pole as per RESPO manual and as per direction of supervising engineer. It includes the cost of labour, T & P, carrier etc required for proper completion of work.

ACSR Weseal Conductor

11 KV XLPE Cable 3x120 sq mm

11 KV XLPE Cable 3x70 sq mm

AB Cable 3x95 sq mm

AB Cable 3x50 sq mm

AB Cable 3x120 sq mm (Double CKT)

Stone Pad

Suspension Clamp

Installation of 11 KV Cable Jointing Kit O/D 3x120/3x185

Installation of 11 KV O/G VCB CTR 200/100/5A 350 MVA

Erection and grouting of stays as per RESPO Norms and as per direction of supervising engineer. Grouting material i.e. cement, sand, brick ballast/stone ballast etc. shall be arranged by the contractor at his own cost.

Earthing Complete

3 Phase Distribution Box with clamp

Dead and Clamp

11 KV Fuse Set

GI Wire 10 SWG

Mounting of 100 KVA TF on D/P including making of the connection etc. complete.

Repairing/Resagging/New guarding of HT lines with GI wire as per RESPO norms/specification.

Carriage of following old material (ACSR Weseal Conductor, X Arm Clamp etc.) from pit site to JE store/store center Etah in distance range 0 to 60 km. including loading & unloading and proper stacking.

ARABH ELECTRICAL

M/s APOORWA ELECTRICALS