PROVISION OF RATION AND CERTAIN REVENUE AND MINOR WORKS AT KALIMPONG UNDER GE 867 EWS

Amount

Surface dressing n exc 15 cm deep and getting out in soft/loose soil all as specified and as directed.

Excavation in trenches not exc 1.5 mtr wide and not exc 1.5 mtr in depth; for foundation etc. and getting out in Soft/ loose soil.

Excavation in post holes each n exc 0.5 cum getting out in soft , loose soil returning filling in and ramming earth or broken rubble mixed with earht around in layer n. exc 25 cm and removing surplus soil to a distance n. exc 50 m and making good surface as directed by Engr- in - charge.

M & L PCC (1:4:8) type D-2 (Using 40 mm grade aggregate) in foundation, filling and mass concrete complete all as specified and directed.

M/L for PCC (1:3:6) type C2 (40 mm grade aggregate) as in foundation, filling and mass concrete complete all as specified and directed.

M/L for Pre cast cement concrete solid block masonry built in (1:3:6) Type B1 and setting in cm (1:6) complete all as specified and directed.

M&L for Raised pointing to pre cast cement massonary wall in CM (1:4) complete all as specified and directed.

M & L Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius in cement mortar (1:6) complete all as specified and directed.

M&L Brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in cement mortar (1:6) complete all as specified and directed.

M&L Brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in cement mortar (1:4) complete all as specified and directed.

Brickwork with flyash bricks, straight or curved on plan to any radius in half brick thick walls, built in with Cement Mortar (1:4) complete all as specified and directed.

M & L Earth filling under floors or in foundations (Except Earth) including watering and consolidation spread, levelled (Note- Earth recive from Excavtion in trench) complete all as specified and directed.

M & L hard core of gauge n. exc 63mm, deposited, spread and levelled in layers n. exc 15cm thick watered and rammed to a true surfaces in broken stone or boulders.

M & L 75 mm thick Cement concrete type C-2, (1:3:6) (40mm graded aggregate) as in subbase for floor, paving complete all as specified and directed.

M & L for Cement concrete 75mm type D-2, (1:4:8) (40mm graded aggregate) as in subbase for floor, paving complete all as specified and directed.

M &L for 100 mm thick PCC (1:4:8) type D-2 (Using 40 mm grade aggregate) as in floor finsh even and smooth without using extra cement complete all as specified and directed.

M&L for 75 mm thick PCC (1:3:6) type C-2 using 40mm graded crushed stone agg as in plinth protection/ path laid slope of 1 in 12 and finshing cement concrete surface even and smooth without using extra cement with and including all necessary form work to divide the area in panels, finishing exposed edges fair or rounding or chamfering of exposed edges or as directed by engr -in-charge.

M & L Damp proof course 40 mm thick in cement concrete (1:2:4) Type B-0 to horizontal or vertical surfaces including necessary formwork complete all as specified and directed.

M&L for RCC Nominal Mix Type B1, (1:2:4) (20 mm graded aggregate) Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete all as specified and directed by Engr- in -charge.

M&L for RCC Nominal Mix Type B1, (1:2:4) (20 mm graded aggregate) Beams, cantilevers, bressumm?ers, lintels over 1.5m all as specified and directed by Engr- in -charge.

Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundationand plinth beams; and similar work; vertical or to batter complete all as specified and directed.

M & L Reinforced cement concrete (nominal mix) Type B-1 1:2:4 (20 mm grading crushed stone aggregate) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

M & L Providing precast ce- ment concrete Type B1 (1:2:4) in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces complete all as specified and directed.

S&F 150mm bore Reinforced concrete pipes, class NP2, laid and jointed complete with collars complete all as specified and directed.

M & L for PCC (1:3:6) type C-2 as in Concrete bed to drain pipes 110 mm dia including packing under, and haunching against the sides of pipes after they are laid and tested; in complete all as specified and directed.

Use & Waste of formwork to Chajjas, chullah hoods, troughs and similar items including edges rough finished surfaces complete all as specified and directed.

Form work to sides and soffits of floor or roof beam, beam haunchings, girders, bressum-mers, lintels, cantilevers, shelves including supports, overhangs, etc also splays between floors and beams,etc. complete all as specified and directed.

Use & Waste of Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and directed.

M & L TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

S&F of TMT bars 6 mm to 8 mm dia, cut to length , bent to shape required , including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips, complete all as specified and directed.

M & L TMT bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

S&F for structural steel work as in roof trusses (framed), trussed, purlins, framing (beam, tee, angle, channel or flat sections) including distance pieces, cleats etc Fe-290 (Gde E?165 )complete all as specified and directed.

S&F for pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and directed

S&F Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering, cladding to wall etc, fixed with self tapping screws all as specified and directed by Engr-in-Charge.

S&F 180mm dia half round PVC (heavy grade) eaves gutter made of PRINCE or equivalent company fixed to MS bracket complete all as directed by Engr in charge.

S&F Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and directed.

S&F of PVC (SWR) junction single, (single T) equal running outlet suitable for 180 mm eaves gutter top portion half round and bottom portion to fit to 110 mm bore PVC pipe all as specified and directed.

S&F PVC decoratie board for Fascial/Eaves board size 23cm height, 1.2mm thick and 3.00 mtr long each piece is used for a good look under roof sheet/roof shingles including taking down exist U/S PVC board complete all as specified and directed.

S&F for MS tublar strcutures as in truss, purline, rafter and vertical post etc confroming to Gde St -240 all sepcified and directed.

S & F for MS plate as in base plate for vertical post of Gde Fe-410 W (Gde E-250) complete all as specified and directed.

M & L Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed or bedding layer in cement mortar (1:6) complete all as specified and directed.

M&L 350X250 mm X7mm thick / 450X350X7mm thick coloured glazed ceramic tiles fixed as in vertical surface such as risers of steps, skirting, dado etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile over and including 10 mm thick backing plaster in cement mortar (1:4) finished even and rough complete all as specified and directed.

M & L Granite (of any type) work 20MM thick (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed by Engr - in - Charge.

M&L for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete including 20 mm thick screed bed in cement mortar (1:6) complete all as specified and directed.

M&L for Machine cut Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete including 20 mm thick screed bed in cement mortar (1:6) complete all as specified and directed.

M & L cement concrete Type B1 (1:2:4) graded aggregate) (20 mm in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for roof, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed

M&L rendering 15 mm thick in CM (1:6) on fair faces of brick work or concrete surfaces to be finished even and smooth using extra cement mixed all as specified and as directed.

M&L 20 mm thick rendering ( in two coats 10mm+10mm) on fair faces of brick work or concrete surface in cement mortar (1:4) on external wall complete all as specified and directed

M&L rendering 15 mm thick in CM (1:4) on fair faces of brick work or concrete surfaces to be finished even and smooth using extra cement complete all as specified and as directed.

M&L rendering 20 mm thick in two layer(10+10mm) CM (1:4) on fair faces of brick work or concrete surfaces to be finished even and Fair using extra cement mixed with intergral water proofing compound @ 3% by weight of cement (WPC measured and paid separately) all as specified and as directed.

Supply only integral water proofing compound (Make : Squant/CTCO) all as specified and as directed.

M&L for preparation on newly plastered / previously untreated surfaces of wall and applying two coats of cement base paint all as specified and as directed.

M&L for preparation of old plastered/previously untreated surfaces of wall and applying two coats of cement base paint all as specified and as directed.

M&L for three coats of white wash on new plastered surface including prepration of wall surface complete all as specified and directed.

M&L for preparation of new surface and applying two coats of oil bound distemper complete all as specified and directed.

M&L preparation of new steel surfaces of any description over 10 cm width or girth not otherwise described and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L preparation of new wood or wood based surfaces of any description over 10 cm width or girth not otherwise described and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

Returning filling in , including, spreading, levelling, watering and well ramming in layers not exc 25cm in soft / loose soil.

Removing excavated material n. exc 50m and depositing where directed at a level n. exc 1.5m above the starting point in soils.

S & F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed.

S & F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top and bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC "C" channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail , lock rail and bottom rail on either side and as gap insert for top rail and bottom rail , panelling of plain colour PVC sheet to be fitted in the MS framewelded/ sealed to the stiles and rails with suitable PVC sheet beading , and jointed together with solvent cement in the frame at site as per specification.

S&F 30 mm thick (batten thickness) second class hard wood, glazed and Skelton shutters, open rebated and prepared to receive glass, gauge, etc , divided into squares, with plain chamfered or rounded, mitred and without sash bars, edges of framing plain, chamfered or rounded with cut mitred beds for securing glass etc, supplied and fitted to chowkhats complete all as specified and directed. (Note :- The dimension of the various components or parts of shutters shall be as specified in clause 8.24 (a) of MES SSR 2009 Part I)

S&F steel window with side hung shutter, including box type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified.

S&F steel window with side hung shutter, including box type hinges with steel handle, and steel peg stay, complete without glazing bars, dovetailed or welded complete all as specified.

S&F 2nd class hardwood boarding, 25mm thick, wrought both sides, V-jointed to give 20mm laps and fixed complete all as specified and directed.

S&F Mild steel pressed handles, 100mm oval type, stove enamelled black complete all as specified and directed.

S&F Mild steel barrel tower bolts 100mm, stove enamelled black, with bright bolt and fixed complete all as specified and directed.

S & F Mild steel barrel tower bolts 200 mm, stove enamelled black, with bright bolt and fixed complete all as specified and directed.

S & F Butt hinges, 100 mm size, heavy weight, cold rolled mild steel, and fixed complete all as specified and directed.

S&F Butt hinges, 100 mm size, medium weight, cold rolled mild steel, and fixed complete all as specified and directed.

S & F 150mm long aluminium handle cost type anodised complete all as specified and directed.

S&F Hasp and staple, mild steel, wire type, stove enamelled black, including bolt to hinge plate and fixed with screws

S&F Mild steel sliding door bolts 150mm length, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and directed.

S & F Steel ventilator with top hung shutter including hinges, steel peg stay, complete all as specified and directed.

S&F of 250 mm long aluminium alloy, anodised sliding door bolts with haps staple(bolt type), and fixing clips of sheet, cast or extruted sections and fixing bolt and sliding bolts of extruted sections or cast aluminium alloy and fixed complete all as specified and directed.

S & F 4 mm thick Figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane complete all as specified and directed.

S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty in square not exc 0.50 sqm in each pane complete all as specified and directed.

S&F mild steel framed work such as grills, grating etc with end of bars shouldered and/ or riveted or forged into spikes, framed guard bars,barred iron doors, ladders, framed balusters, walk ways, railings and similar work confirming to Fe-410-0 or Fe 310-0 complete all as specified and directed.

S&F sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed.

S & F Soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and directed.

S & F Vitreous Cliina wash basin, flat back, size 550x400mm white, excluding taps, waste, chain and plug and porcelain stopper but including brackets, cutting for & plinning in ends of brackets or erecting stands complete all as specified and directed.

S & F vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) Water closet (Squatt pattern) complete including trap set including provision of lime concrete bedding complete all as specified and directed.

S & F bib taps 15mm bore cast copper alloy chromium plated with crutch or butter fly handle, screwed down, screwed for iron pipe or for brass ferrule & fixed 15mm bore complete all as specified and directed.

S & F Grating doom 100mm dia of PTMT (Minimum weight 25gms) complete all as specified and directed.

S&F PVC (SWR) gully trap 110 mm bore, setting jointing with solvant cement complete all as specified and directed.

S&F 75 mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.

S & F Pillar taps 15mm bore, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed.

S & F PVC valve less , syphonic action type flushing cistern 10 ltr capacity low level, whit, with inlet, ball valve float, flush pipe and handle including brackets, low level fluslhing cistern (exclusive of brackets), and connections to pipes and fixing of chain and pull, or lever, if any complete all as specified and directed.

S & F Vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe)Vitreous China urinals, bowl type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar (1:2) securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe)

S&F Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms complete all as specified and directed.

S & F Stop cock 15 mm bore cast copper alloy screwed down high pressure fancy type, chromium plated with long shank and cup (concealed type) complete all as specified and directed.

Cutting chases, pinning in brick/pcc block wall and making good to facings where equired and pointing in cement mortar (1:3) to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring,etc., and making good, cutting not exc 10 cm girth complete all as specified and directed.

S & F 15mm bore of tube medium grade galvanized with all fittings & fixed complete to walls & ceiling or laid in floors complete all as specified and directed.

S&F CP towel Rail 20mm dia, D type, 60cm long between flanges etc, complete all as specified.

M &L PVC connections 15mm size with PTMT nuts of length 600mm complete all as specified and directed.

S & F PVC (SWR) pipe 75mm bore single socketed in any length with rubber ring joint fixed to wall (ISI Marked) all as specified and as directed.

S & F PVC (SWR) pipe 110mm bore single socketed in any length with rubber ring joint laid in trenches or in floor (ISI Marked )

S & F PVC (SWR) pipe 75mm for weep holes, including ring joints to laid in trenches or in floors complete all as specified and directed.

S&F PVC ( SWR ) bends 75 mm bore complete all as specified and directed.

S&F PVC ( SWR ) bends 110 mm bore complete all as specified and directed.

S&F PVC (SWR) branch pieces 75 mm (Single Y) equal or unequal complete all as specified and directed.

S&F PVC (SWR) branch pieces 110 mm (Single Y) equal or unequal complete all as specified and directed.

M&L for coloured & polished Chequered cement concrete tiles 30cm x 30cm x 25mm thick,set, jointed and pointed in neat cement slurry as in floors includig 15mm thick screed bed in cement mortar (1:6) all as specified and directed.

S&F 110mm bore PVC (SWR) vent cowl complete all as specified and directed.

S&F of 110 mm PVC (SWR) drain pipe single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

S&F of 110 mm bore PVC (SWR) bend any radius with access door complete all as specified and directed.

Material and labour for point wiring with 1.5 Sqmm (nominal area) PVC insulated un - sheathed single core multi stranded copper conductor FRLS cable 1100 volts grade (conforming to IS) drawn through and including rigid non metallic PVC conduit not less than 20mm size, medium grade with all necessary fittings, concealed wiring , for light / E/fan/Bell point controlled by one switch including 1.5 Sq mm PVC insulated copper stranded conductor for earth continuity conductor and connected to earth dolly and to be terminated in 1.6 mm thick pressed steel terminal boxes (concealed type in permanent bldg and surface in temporary bldg or as directed ) for mounting fittings like switch, socket, fan regulator etc. with 3 mm thick laminated bakelite sheet cover ,for housing switches, socket outlet, regulator etc. complete all as specified or directed including testing on completion.

All as per item No 110 here – in – before but for one 3 / 5 -pin switch socket outlet 5 amps on independent board.

All as per item No 110 here – in – before but for one 5 pin, 6 A socket outlet on the same board.

All as per item No 110 here – in – before but for one switch socket outlet 15 Amps on independent board with 2.5 Sqmm multi stranded and 2.5 Sq mm stranded (for earth) PVC insulated un-sheathed copper cable.

Supply and fix switch piano flush button, single pole, 5 amps, one way all as specified and as directed.

Supply & Fixing ceiling rose surface bakelite 65 X 50 mm three terminal all as specified and as directed.

Supply and fixing lamp holder insulated body with back plate for batten fitting all as specified and as directed.

Supply and fix switch socket combination 2 – in – one, 3 Pin / 5 Pin, 5/6 amps flush type all as specified and as directed.

Supply and fixing LED retro fit lamp B-22, CCT- 3000 K/ 6500 K holder base with poly carbonate body and aluminium heat shrink of 9 W complete all as directed. Cat Part No LHLDDBEBBI8R009 of Havells or equivalent in Crompton/Surya.

S & F Energy efficient LED tube light fitting 4", 1x22 watt, with bipin holders, connector block, CCT - 6500K, system output lumen not less than 2000lm, extruded aluminium housing with high quality Polycabonate diffuser, wide voltage protection range 140V-270V including connecting up with PVC insulated 3 core sheathed 0.5 sqmm copper conductor two numbers PVC mounting blocks for fixing of fitting complete all as specified and as directed by Engineer-in-charge. Make : Philips, Model - TMC 501, TMC 501P 1XT-LED 22W P3241 or equivalent in Crompton/Havells.

Supply and fixing LED tube light fitting, 4 feet long 1X18W, 220V , AC decorative box type with driver, holder including lud tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.

Supply, Fixing, Testing & Commsioning of IP66 & IK09 integral LED Bulk Head luminaire with housing made of Pressure Die Cast alumunium & Optical cover made of Opal Polycarbonate for glare free lighting . System Lumen Output of minimum 600 lumens. Power Consumption should not exceed 10W (Including Driver Loss). For Glare free lighting luminaire should be with Opal diffused Polycarbonate. Make : Philips, Cat part No. "WT 202W LED 6S CW PSU S2 PC", Color temperature 6500 K, CRI >80, Housing - High pressure die cast aluminum, Mounting - Surface, THD < 20%, PF >0.9, Operating voltage range 120V-277V AC. Submission of LM80-08 for LED source & LM79-08 for Luminaire from third NABL Accredited Lab / UL mandatory including connecting up with 3.0 core, 0.5 sqmm copper conductor sheathed as specified and directed.

S & F LED light fitting mirror type with high output diffuser 2 feet, 10W,220V AC decorative type with driverholder and led lamp including connecting up with three core flexible copper conductor cable of suitable size complete. Make : Crompton, Usha, Havells, Orient.

Supply and Fixing exhaust fan, steel body AC single Phase. 230V of size 300mm sweep with, blades, and frame and louvers including taking down old u/s fan & deposit to MES Store, complete all as specified and directed by Engr-in-Charge. Make : Crompton, Usha, Havells, Orient.

Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc including taking down old u/s Geaser & deposit to MES Store complete all as specified and directed by Engr-in-Charge. Make : Crompton, Usha, Havells, Orient.

S&F metal plug socket single pole and neutral encloser with two pin earth plug with 01 No MCB SP 20 Amp, C series complete all as specified. Cat part No 5078 11 Make- Legrand or equivalent in Siemens/Schindler.

Supply and fixing Sheet metal enclouser Double door for MCB DB,s Phosphatised Powder Painted with bus bar 200 Amps rated Single pole and neutral linkof 4 way 240 Volts AC. Make- Legrand/Siemens/Schindler.

Supply and fixing MCB Single pole and neutral upto 32 Amps capacity 10 KA 240 Volts 50 HZ. conforming to IS/IEC 60898-1 2002, integrated label holder, Sliding bottom clamp, IP 20 protection, Cat part no 4086 17 of Legrand or equivalent in Siemens/Schindler.

Supply and fixing amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of SPN 40 to 63 AMP poles and current carrying capacity in the MCB DB complete with connection testing and commissioning. Make : L & T / Legrand /Siemens / Schinder

Supply and fixing amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of SP 5 To 32 AMP poles and current carrying capacity in the MCB DB complete with connection testing and commissioning. Make : L & T / Legrand /Siemens / Schinder

Supply and fix MCB/Isolator single pole (SP), 10 kA of 6 Amps to 32 Amps capacity 240 Volts. conforming to IS/IEC 60898-1 2002, integrated label holder, Sliding bottom clamp, IP 20 protection, Cat part no 4085 87,90,92,93,94,95 of Legrand or equivalent in Siemens/Schinder.

Earthing complete with galvanized steel earth plate electrode 600 x 600 x 6 mm buried directly in ground ( earth pit not less than 2.25 m deep bellow ground level ) with top edge of the plate not less than 1.5 m bellow normal ground level, connected to galvanized earth lead wire 4 mm dia. by means of galvanized iron or steel bolts , nuts , check nuts and washers, and connected to equipments as directed , including funnel with GI med grade watering pipe 20 mm bore , wire mesh , charcoal or coke and common salt in alternate layers of 15 cm compacted thickness all around the earth electrode , with concrete pit in PCC 1 : 3 : 6 type C-1 , 50 mm thick pre cast RCC 1 : 2 : 4 type B-1 cover slab reinforced with 8 mm dia deformed bar 15 cm C/C and suitable handle of 10 mm dia round bar ,GI medium grade pipe for earth lead protection including necessary excavation earth work in soft/loose soil and disposal of spoil to a distance n.exc. 50 m and necessary testing complete all as shown on electrical plate No. 5 of MES SSR Part-I and as directed.

Supply and lay cable XLPE insulated Heavy duty screanedPVC bedded, galvanized steelstrip or wire armoured, electric power cable 1100 Volts grade with stranded aluminium conductor of size 6 sq mm 2 core. complet all as specified.

Supply and lay cable XLPE insulated Heavy duty screaned PVC bedded, galvanized steelstrip or wire armoured, electric power cable 1100 Volts grade with stranded aluminium conductor of size 10 sq mm 2 core. complet all as specified.

Supply & lay common bournt Sub Class B Brick laid over sand caushioning for mechanical protection complet all as specified.

Sand cushioning to under ground cable with layer of sand deep before laying and after laying the cabe. Note Punned thickness 18 CM wii be measured.

S & F Steel pipe glavanized grade of 40 mm Dia laid in trenches or under ground/floor or road of fixed with pole for protection of cable including clams with bolts nuts and wasers complete all as specifed.

M&L for GI tubing 25 mm dia Medium grade with all fittings laid in trenches or fixing in wall, all as specified an directed.

M&L for GI tubing 20 mm dia Medium grade with all fittings laid in trenches or fixing in wall, all as specified an directed.

Supply and Fix Rotational moulded poly-ethylene water storage tanks (cylindrical vertical closed top) 750 Lts Capacity icluding suitable outlet tank ipple and locking arrangements hoisted and fixed in position all as specified and directed.

S&F PVC float valve, high pressure with polythene float and fly nut complete screwed for PVC pipe and fixed in 25 mm bore pipe incl taking down old u/s one Make : PRAYAG

Cutting , screwing, threding and fixing GI tubing for alteration or addition size of 40/ 25 mm dia GI tubing all as speciied and directed by engr in charge.

S&F for Gun metal, globe or gate valve, with iron wheel head, screwed both ends for iron pipe and fixed suitable for 25 mm dia GI tubing all as specified.

S&F for Gun metal, globe or gate valve, with iron wheel head, screwed both ends for iron pipe and fixed suitable for 20 mm dia GI tubing all as specified.

Note: In case doubling/duplicancy of BOQ items , the lowest quoted rate shall be applicable for payment.

DEDUCTED AMOUNT OF SCHEDULE OF CREDIT

DEEP CHANDRA JOSHI

GEETA CONSTRUCTION

S K ENTERPRISES

Sri Gupta Construction

M/S JAYSHREE CONCERN

SANJAY MITTAL

ANTHONY PRADHAN