CWE/P-16/2024-25

Amount

M&L for Preparing black top surfaces by brushing with wire brushes for removing caked mud vegitation grass etc, sweeping with brooms and finally fanning the cleaned surface with mechanical air compressor to remove all loose dirt etc and applying evenly a priming/tack coat with bituminous primer using paving bitumen VG-10 @ 5 Kg / 10 Sqm and bituminous premixed asphaltic semi dense concrete 30mm consolidated thickness using crushed graded stone aggregate mixed with binder content of paving bitumen VG-30 with 5.5% binder contents by weight of total mix by using self propelled mechanical paver, rolled and compacted to required camber and gradient with 8 to 10 Tonne capacity power roller including preparation of bitumen carpet in digital computarized weigh batch hot mix plant, complete all as specified. Note: The quantity of bitumen shall be provided as per Design mix approved by GE. (The cost of transportation of the material to the Govt approved lab and design mix charges shall be borne by the contractor). for the purpose of quoting, the contractor shall consider 5.5% binder by weight of total mix. However, the work shall be executed as per approved design and price adjustment shall be done only for variation (plus or minus) in quantity of binder priced at supply only rate of bitumen (as per purchase voucher of main producer).

M&L for Repair to potholes depth of pot holes exc 30 mm , not exc 1Sqm each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths, etc. cutting around edges to at least 25 mm in depth, making good by applying tack coat @ 5 kg per 10 sq m, putting in premixed bituminous macadam, well rammed and sealed with binder 9.8 kg per 10 sq m, blinded with 0.09 cum of stone chippings, 6.3 mm size and again well rammed (including supply of premixed macadam, binder and chippings) complete all as specified and directed.

M&L for premixed bituminous macadam (design mix) with 5.5 % of binder content by weight of total mix using paving bitumen VG-30 mixed in mechanical hot mixed plant and premixed material laid with mechanical paver finished including rolling to required camber and gradient (consolidated thickness 75 mm or less) with 8 to 12 tonne power roller to required compaction, complete all as specified and directed. Note: The quantity of bitumen shall be provided as per Design mix approved by GE. (The cost of transportation of the material to the Govt approved lab and design mix charges shall be borne by the contractor). for the purpose of quoting, the contractor shall consider 5.5% binder by weight of total mix. However, the work shall be executed as per approved design and price adjustment shall be done only for variation (plus or minus) in quantity of binder priced at supply only rate of bitumen (as per purchase voucher of main producer).

Supply and fixing solar cat eye alunimum alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x25mm (shank 65mm) of high efficiency Moncrystalline solar panel 2.4V/0.3 watt one NI-ed rechargeable battery (1.2V/1600MA) consistig of super bright LED with 10,000 to 18,000 MCD complete all as per manufactures instructions and all as specified and directed.

S&F in repair Dual directional reflective cat eye of aluminium casted stud 100x100mm having micro cube corner spark glow reflector white/ red/ yellow on side provided with steel zinc plated nail of dia 12mm of length 120mm for fixing to road by hammering etc, complete all as specified and directed.

S&F for Solar road delineator 6 LEDs of colours red/yellow housed in aluminium / Plastic body LEDs, solar cells, battery and light sensor well protected inside poly carbonate sheet, device protected with powder coated wire mesh cage. System mounted over 47 mm dia steel tube powder coated of length 600 mm having sheet foot for firm grip to ground. System workable for 2-3 days (nights) after full charge for 8-10 hours, complete all as specified and directed.

M&L for thermoplastic road marking paint not less than 2mm thick, white or golden yellow in colour, conforming to BS-3262, in lines, arrow, dashes & letters not exceeding 15 cm in width, applied hot, using application unit and retroreflevtive glass beads @ 250 to 300 gm/Sqm to withstand vehicular traffic load, laid as per manufacturer's instructions etc. complete all as specified and directed.

Notes : The Schedule of Credit amount shall be deducted from the total of this schedule (BoQ) to arrive at Contract Sum.

M/S ANJALI STONE CRUSHER (BID ID -3085907)

Sandeep Kumar (BID ID -3086201)

M/S VIRENDERA BUILDERS (BID ID -3093947)