Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹10.9 LAccepted-AOC BHAGAT SINGH CHOWK SURATGARH 335804 DISTT SRIGANGANAGAR RAJ | GANGANAGAR | RAJASTHAN | 335804 | L1 | Accepted-AOC LOWEST | |
| 2 | L2₹11.3 L+₹42,603.25 (3.92%)Rejected-Finance | L2 | Rejected-Finance NOT BEING LOWEST | |
| 3 | L3₹11.8 L+₹91,389.50 (8.41%)Rejected-Finance | L3 | Rejected-Finance NOT BEING LOWEST | |
| 4 | L4₹13.4 L+₹2.6 L (23.7%)Rejected-Finance | L4 | Rejected-Finance NOT BEING LOWEST |
Tender Value
Refer Docs
EMD Value
₹30,000
Closing Date
15 Nov 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
LT COL PRIYESH SRIVASTAVA
SURATGARH
REPAIR TO ROOFING AND ALLIED WORKS IN ZONE A IN TECH AREA AT AF STATION SURATGARH
2022_MES_558378_1
8973/E8
Open Tender
Civil Works
Item Rate
180 days
GE (AF) SURATGARH
AS PER TENDER DOCUMENTS
10 documents required · 10 mandatory
₹500
GE (AF) SURATGARH
₹30,000
Yes
20 Dec 2022
18 Oct 2022
17 Nov 2022
18 Oct 2022
15 Nov 2022
1 Nov 2022
Amount
BOQ (REPAIR TO ROOFING AND ALLIED WORKS IN ZONE 'A' IN TECH AREA AT AF STATION SURATGARH)
Dismantling Bricks (laid flat or on edge) or brick tiles laid, bedded and pointed in any mortar in floors, channels, kerbs, aprons, etc complete all as specified and directed.
Removing mortar from and cleaning bricks, stacking for measurement including all extra handling and removal and disposing off rubbish complete all as specified and directed.
Demolition Mud in roofs, any thicknes, including plastering and leeping (whether full thickness removed or only or part thereof) incl roughing of surface after demolition and Removing the material exc. 1.50 km but n exc.5km and depositing where directed complete all as specified and directed.
. M&L for PCC 1:2:4 Type B0 (using 12.5 mm graded aggregate) in roof as levelling course, kerbs or mud stops, rounded or chamfered on edges complete all as specified and directed.
M&L for 10mm thick cement plaster in CM 1:3 on fair faces of brick work or concrete surfaces and finished even and smooth with out using extra cement but using water proofing compound @ 3% of cement weight complete all as specified and directed.
Supply only Integral waterproofing compound.
M&L for APP based polymeric membrane minimum weighing 3.5 Kg/Sqm and minimum 3mm thick reinfored with polyster non woven fabric( wt not less than 160gm/sqm ) laid over primed surfaces including bituminous primer conforming to IS-3384applied @ 0.3 Ltr/Sqm by forced application complete all as specified and directed.
M&L for Applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2kg per sqm including cleaning of surfaces complete all as specified and directed.
M&L for 40mm thick brick tiles are bedded in 15mm thick cement mortar (1:6) and joints grouted flush in cement mortar (1:3) mixed with liquid WPC in lit on APP membrane bedded in cement mortar (1:6) all as specifed and directed by Engr-in-charge.
M&L for reusing the old serviceable 40mm thick brick tiles bedded in 15mm thick cement mortar (1:6) and joints grouted flush in cement mortar (1:3) mixed with liquid WPC in lit on APP membrane bedded in cement mortar (1:6) all as specifed and directed by Engr-in-charge. Note: Brick tiles retrieved from item no 1 shall be reused after proper cleaning.
Providing and injecting chemical emulsion for Post Constructional Anti-termite Treatment along external wall where the apron is not provided using chemical emulsion at the rate of 7.5 litres per sq.m of the vertical surface of the sub-structure to a depth of 300 mm including excavating channel along the wall anf rodding complete all as specified and directed.
Along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron complete all as specified and sirected.
Treatment of soil under existing floors using emulsion @ one litre per litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement :2 coarse sand) to match the existing floors complete all as specified and sirected.
Of voids in masonry using chemical emulsion one litre per hole, at 300mm intervals including drilling holes at 45 degree and replugging them witth CM 1:2 to match with the existing floors complete all as specified and sirected.
At points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ .5 litre/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150 mm centre to centre and sealing the same complete all as specified and sirected.
Dismantling plain or corrugated Asbestos cement sheeting, any thickness as in roof coverings or wall cladding complete all as specified and directed.
S & F pre-painted galvalume aluminium zinc coating GI based corrugaed steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.
Dismantling wrought iron or mild steel work of any description not otherwise provided complete all as specified and directed.
S&F Mild steel plates, plain or chequered, in 5mm thick or over in thickness in available sizes, Fe 410-W (Gde E-250) quality complete all as specified and directed.
S&F steel work in tubular truss including special shaped washer etc complete using ERW or induction butt welded tubes conforming to I.S 1161-1979 grade st-240 complete all as specified and directed.
S&F Mild steel framed work such as in doors/chowkhats or gates of angle or other section with gusset plates, rail, braces etc. complete drilled for fixing of steel sheeting or other covering. Doors etc. to be prepared for hanging or sliding with including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging, also fastening & fixing and similar work conforming to Fe-290 grade E-165 , complete all as specified and directed by Engineer-in-Charge
S&F Aluminium chequered grills as on aluminium windows, weight n.exc 0.50 kg / sqm and fixed including taking down of old unservicable grill, complete all as specified and directed by the Engineer in charge.
S&F solid panel PVC door frame 50mmx 47mm made out of 5mm plain covered PVC sheet , reinforced with M S square tube and fixing in opening as per specification and drawing complete all as specified and directed.
S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fit-ted in the M.S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specifica-tion & drawing complete all as specified and directed.
M&L Double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed in repair complete all as specified and directed.
S&F floor door stopper of aluminium alloy body and double tounge anodised with hard drawn steel spring 140mm long complete all as specified and directed.
Repair to aluminium door shutter of any description including taking down from the chowkhat and refixing the same in position after repairing, tightening of frame including new screws, cleats etc. , complete all as specified and directed by Engineer-in-Charge
Hacking out old broken glass (any thickness, size, quality or description ) from wooden frames including punching or drillingout old glazing pins/spring clips complete all as specified and directed.
Hacking out old broken glass (any thickness, size, quality or description ) from metal frames , glazed with putty or fixed with beads and providing and fixing new ones complete all as specified and directed.
M & L for 3mm thick sheet glass ordinary quality and glazing with oil putty in squares n.exc 0.5 sq. m in each pane complete all as specified and directed.
M & L for 3mm, figured glass pin head type and glazing with oil putty in squares n.exc 0.5 sq. m in each pane complete all as specified and directed.
Supply and fix in repairs stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or stainless steel wire staples complete all as specified and directed.
Supply and fix rubber beading for doors of any required size and having a width n exc 30cm complete all as specified and directed.
M&L for Prepration of old painted surfaces of steel and steel based materials of any description over 10cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.
S&F MS drappery curtain rods 25mm dia of approved quality with two number brackets and necessary rings fixed in brick/concrete wall and decorative knobs on each end of curtain rod complete all as specified and directed.
Dismantling of boarding of any description fixed in any position with nails in CB's loft, showcases, utensil racks etc complete all as specified and directed.
S&F 19/20mm Pre-laminated exterior grade both side laminated board fixed with screws complete all as specified and directed. (Make - Kit Ply/Mayur/Archid)
S&F, 40 mm width continous (piano) hinges,mild steel bright finish or electrogalvanised complete all as specified and directed.
Supply & fix magnet catcher suitable for cupboard shutter complete all as specified and directed.
Easing of door/window or cupboard (complete for one No door or window) shutter of any size/any number of pannels for easy closing/opening, tighting of hinges or changing the position of hinges adjustment of tower bolt, sliding bolt, door spring, door handle etc, complete all as specified and directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.
M&L for coloured glazed ceramic tiles of approved shade of size 450mm x 300mm x 7 mm thick laid in Dado etc set and jointed in white or coloured cement to match the surfaces (existing) laid over and including 10mm thick rendering in CM 1:4 complete all as specified and directed.
M&L for Non skid ceramic coloured tiles 7 to 8 mm thick (as approved)(square/rectangular) area of each tile exc .06 sqm but n exc. 0.11 sqm ,in floors etc . Set &jointed in neat cement slurry and pointed in white or coloured cement to match with shade of tiles over 15 mm thick screed bed in CM (1:6) complete all as specified and directed.
M&L for non skid Ceramic coloured tiles 7 to 8 mm thick (as approved) ( squrare/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm ,in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over and including 15 mm thick screed bed in cement mortar 1:6 in floors etc , complete all as specified and directed.
M&L for Vitrified tiles of premium quality, light shade, 10 mm thick (square/ rectangular) area of each tile not exceeding 0.36 Sq.m, laid in floors with neat cement slurry @ 3.00 kg/Square Metre over and including 15 mm thick screed bed of cement mortar (1:6) including pointing in white cement with pigment to match the shade of tiles,complete all as specified and directed by the Engineer in Charge.
M&L for coloured glazed ceramic tiles of size 300x200x7 mm thick as in vertical surface such as skirting , dado and risers to steps etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade over and including 10mm thick rendering in cement mortar 1:4 complete all as specified and directed by Engr-In-Charge.
M&L for Vitrified tiles of premium quality, light shade, 10 mm thick (square/ rectangular) area of each tile not exceeding 0.36 Sq.m, as in skirting, set and jointed in neat cement slurry, over and including 10 mm thick rendering of cement mortar (1:4) including pointing in white cement with pigment to match the shade of tiles,complete all as specified and directed by the Engineer in Charge.
Demolition of cement concrete in ground floor and paving not exc 15 cm thickness (below or above ground level) and rubbish off the premises complete all as specified and directed by Engr-In-Charge.
M&L for 75 mm thick cement concrete 1:3:6 type C-2 (using 40 mm graded stone aggregate)as in plinth protection finished even and smooth without using extra cement including forming necessary joints 12 mm wide to the full depth of PCC at every 3 metres and every change of direction and filling the same with & including bitumen and sand 1:3 by weight complete with and including necessary form work etc complete all as specified and as directed.
M&L for 75mm thick PCC 1:2:4 type B-2 (using 40mm graded stone aggregate) as in top surface of Hardstanding /Path etc, finished the surface even and smooth without using extra cement complete all as specified and directed.
Dismantling of paverblock/tiles of any description or thickness in floors, aprons etc. laid dry or laid dry and pointed complete all as specified and directed by Engr-In-Charge.
M&L for 75 mm thick cement concrete 1:4:8 type D-2 (using 40 mm graded stone aggregate)as in sub base, floor complete all as specified and as directed.
M&L for factory made machine pressed precast concrete interlocking paver block any shape or size confirming to IS 15658 of 80mm thickness M-40 grade with grey cement and no pigment laid over and including 25mm thick sand cushioning and filling the joints upto full depth with fine tibba sand, complete all as specified and directed by Engr-In-Charge.
Fixing only retrived machine pressed precast concrete interlocking paver block/tiles any shape or size with grey cement and no pigment laid over and including 25mm thick sand cushioning and filling the joints upto full depth with fine tibba sand, complete all as specified and directed by Engr-In-Charge. NOTE: Pavers block retrieved from item no 51 shall be reused after proper cleaning.
S&F in repair CP health faucet with 1.20m length pipe complete all as specified and directed.
Demolition of stone slabs & tiles of any description or thickness in floor aprons,cills etc laid bedded &pointed in any mortar complete all as specified and directed.
M&L 18-20mm thick Granite (of any type) work (table rubbed and polished) in cooking platforms and like in CM 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.
Taking down cement plaster including racking out joints hacking for key, scrubbing down with water etc and rubbish off the premises complete all as specified and directed.
M&L for rendering 15mm thick on brick work or concrete surfaces in cement mortar 1:4 ,finishing the surfaces even and smooth without using extra cement complete all as specified and directed.
M & L for preparation of newly plastered surface of wall and appying two coats of oil emulsion distemper over and including one coat of chalk whiting primer complete all as specified and directed.
M & L for preparation of old plastered surface of wall and applying one coat of oil emulsion distemper complete all as specified and directed.
Demolition of brickwork built in cement mortar including all quoins, arches, pillars, etc, and rubbish off the premises complete all as specified and directed.
M&L for Bricks work with sub class 'B' bricks straight or curved on plan exc 6 m mean radius built in cement mortar 1:6 complete all as specified and directed.
M&L for Bricks work with sub class 'B' bricks straight or cuvred on plan to any radius in half brick thick wall built in cement morter 1:4 complete all as specified and directed.
M&L for rendering 10mm thick on brick work or concrete surfaces in cement mortar 1:4 complete all as specified and directed.
S&F 8mm thick hollow printed coloured PVC sheet wall lining/panelling including frame work (sample kept in GE office) made of 1mm thick PVC sheet in strips and channels feathered at the edges for fixing of wall lining inclusive of solvent cement and fixing at site , complete all as specified and directed by the Engineer-in-Charge
S&F Gypsum ceiling board of size 595 mm x 595 mm x 12 mm thick as in ceiling, fixed with screws on GI grid frame work of size 600mm x 600 mm, GI T-section of size 25mm x 25 mm x 1.25mm, GI L-section 25 mm x 25 mm x 1.25 mm, hanging arrangements with roof with GI wire not less than 2.00 mm dia, including applying two coats of distemper oil emulsion (of approve shade) after preparation of surface, including taking down existing ceiling board of any description complete as per manufactures instructions , complete all as specified and directed by Engineer-in-Charge.
S&F Fibre insulation ordinary type board 12mm thick of any size (size of board as per site requirement) as in ceiling, fixed with screws on GI grid frame work, GI T-section of size 25mm x 25 mm x 1.25mm, GI L-section 25 mm x 25 mm x 1.25 mm, hanging arrangements with roof with GI wire not less than 2.00 mm dia, including applying two coats of distemper oil emulsion (of approve shade) after preparation of surface, including taking down existing ceiling board of any description complete as per manufactures instructions , complete all as specified and directed by Engineer-in-Charge.
S&F in repair PVC valveless, syphonic action type, flushing cistern of 10 liters capacity, low level, white with inlet, ball valve, float & handle including brackets and all fittings complete all as specified and directed.
S&F stainless steel plate rack 1 mm thick of size 750 mm x 600 mm including shelves rod for putting plates etc complete all as specified and directed.
S&F in repair 15 mm dia CP bib taps of cast copper alloy chromium plated with crutch or butterfly handle fancy type screwed for iron pipe complete all as specified and directed.
S&F 15 mm bore stop valves chromium plated fancy type with long shank (concealed type) screwed down high pressure with crutch or butterfly handle , screwed both ends for iron pipe complete all as specified and directed.
S&F in repairs 15 mm angle valve, fancy type, chromium plated brass, incl connecting to PVC/CP connection complete all as specified and directed.
S&F fancy type pillar tap 15mm bore , cast copper alloy, ISI marked with capstan heads, chromium plated, screwed down, high pressure, with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and directed
S&F in repair 20 mm bore Gun metal globe or gate valves with Iron wheel head screwed both ends for iron pipe complete all as specified and directed.
S&F in repair ball valve 20mm high pressure PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. ( minimum weight 20 mm- 210 mm complete all as specified and directed.
S&F in repairs Plastic water closet seat white closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device etc all as directed and specified by Engr-in- Charge
S&F in repairs vitreous china bowl urinal flat back size 465 x 355 x 265 mm white (minimum) with gratings and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipes ) etc complete including providing and fixing, bedding urinal against wall in CM (1:2), securing urinal to plugs with and inculding 60 mm long Brass screws, pointing around urinal back in cement, fixing automatic flushing cistren with brackets flush pipe, grating and union for discharge pipe complete all as specified and directed.
S&F in repairs Wash basins, vitreous china, white, flat back of size 550x400 mm including brackets and cutting for and pinning in ends of brackets or erecting stand 32mm dia waste fittings, brass, chromium plated with long screwed shanks and fly nuts, 32mm dia HDPE waste pipe and including new brackets fixed as in repair , complete all as specified and directed by the Engineer in Charge.
M & L for Europian type vitreous china WC with vitreous china flush cream colour with 'S' trap size (365x610x710) front and back inlet etc including connection to trap and flush pipe, fixed as in repairs complete all as specified and directed. Make : Somany Cat Part No. 120130 or equivalent of Cera/Hindware.
S & F vitreous China squatting pan, `Orissa` pattern, size 580 x 440 mm white, with integral foot rests including connection to trap, and to flushing pipe, anti-syphonage pipe, etc making good to floor and cleaning, including demolition of old squatting pan complete all as specified and directed.
S&F in repairs vitreous china wash down water closet (Pedestral pattern ) white pan and trap , including connection to drain (or out going pipe ) and to flushing pipe, anty syphonage pipe etc complete complete all as specified and directed.
Cutting chases, pinning in making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc, cutting exceeding 20cm girth and making the good complete all as specified and directed.
Taking up and down steel tubing and connections 15mm bore including cleaning for refixing or removal from the site complete all as specified and directed.
Taking up and down steel tubing and connections 20mm bore including cleaning for refixing or removal from the site complete all as specified and directed.
S & F GI tubing 15 mm bore medium grade with all fitings fixed to wall, ceiling or laid in floor, complete all as specified and directed.
S & F GI tubing 20 mm bore medium grade with all fitings fixed to wall, ceiling or laid in floor, complete all as specified and directed.
Refixing old steel tubing of 15 mm bore and connections in new or old position in walls, ceiling and floors etc complete all as specified and directed.
Refixing old steel tubing of 20 mm bore and connections in new or old position in walls, ceiling and floors etc complete all as specified and directed.
Dismantling existing water storage tanks exc 250 litres but n.exc 500 litres capacity and removal from site complete all as specified and directed.
Dismantling existing water storage tanks exc 500 litres but n.exc 1000 litres and removal from site complete all as specified and directed.
S&F 500 litres capacity, roational moulded polythylene White water storage tank double layered (cylindrical vertical with thread cover closed top) hoisted and fixed in position including GI tank nipple, with union (two Nos each) fittings and making necessary connections to make the tank functional complete all as specified and directed.
S&F 1000 litres capacity rotational moulded polyethylene White water storage tanks (Cylindrical vertical with thread cover closed top) double layered, hoisted & fixed in position including GI tank nipple and with union (two No each) fittings and making necessary connections to make the tank functional complete all as specified and directed.
S&F in repairs, PVC Ball valve 15mm dia, high pressure with polythene float and fly nut screwed for iron pipe or brass ferrule complete all as specified and directed.
S&F in repairs Toilet paper holder of brass chromium plated fixed to walls with chromium plated, brass screws complete all as specified and directed.
S&F (in repairs) 125 mm dia swivel shower rose brass chromium plated, including fixing to steel pipe or union complete all as specified and directed
S&F in repairs PVC waste pipe 32mm bore with suitable flexible length for wash hand basin incl necessary connecting coupling complete all as specified and directed.
S & F (in repairs) waste coupling of PTMT (half or full threaded), minimum weight 45gms, suitable for discharge pipe of 32mm bore dia complete all as specified and directed.
S&F PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed
S&F chromium plated jet for ETWC, 1.2mtr long flexible pipe withtwo steel check nuts complete all as specified and directed.
Petty repairs to leaking water in bib taps, pillar taps, stop cock, angle valve, PVC connection, waste pipes, float valves, concealed stop cock, GI pipe joints, bottle traps etc of any description by changing the washers, phase etc or any other minor accessories to make the system functional complete all as specified and directed.
Contract Amount shall be derived after deducting the amount of Schedule of Credit in General Summary on serial page No 17 tender documents.
PG CONSTRUCTION AND COMPANY
RATHORE ENTERPRISES
Bhawani Enterprises
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .