CERTAIN B/R ALLIED WORKS AND PAINTING TO OFFICERS MARRIED ACCN UNDER AGE BR-I AREA AT NAMS

Amount

S&F Vitrified ceramic tiles light shade 10mm thick (square/rectangular) area of each tile exc 0.18 sqm but not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed or bedding layers in CM 1:6 incl dismantling / demolition and rubbish off the primises etc complete all as specified and directed..

M&L for, vitrified tiles, 10mm thick (minimum), (square/ rectangular) polished, area of each tiles exceeding 0.18 Sqm but not exceeding 0.36 Sqm, in skirting/dado, set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles and over and including 10mm thick rendering in CM (1:4) incl dismantling / demolition complete all as specified and directed.

M&L for glazed ceramic coloured tiles of size 450mm x 300mm x 7mm on vertical surface such as skirting, dados, risers to steps etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles, over and including rendering 10mm thick in cement mortar (1:4) and dismantling / demolition , complete all as specified and directed.

M&L for coloured non skid ceramic tiles, 7 to 8 mm thick, (square/rectangular), area of each tile exceeding 0.06 sq.m but not exceeding 0.11 sq.m in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including including screed bed or bedding layer of 15 mm thick cement mortar (1:6) and dismantling / demolition complete all as specified and directed.

M&L 25 mm thick cement concrete type B0, 1:2:4 using 12.5mm graded stone aggregate as in sub base to receive floor finishes complete all as specified and directed incl dismantling / demolition of PCC complete all as specified as directed.

Taking down cement plaster on brick or stone wall etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L for rendering 10mm thick in cement mortar (1:6) on brick work or concrete surfaces of walls , finished even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 15mm thick in cement mortar (1:4) on fair faces of brick work or concrete surfaces of walls, finished even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 10mm thick in cement mortar 1:3 on fair faces of concrete as in ceilings and finished even and smooth without using extra cement complete all as specified and directed.

M&L for preparation of new plastered or un-plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed.

M&L for Preparing Newly Plastered Surfaces of internal wall and applying two Coats of oil emulsion distemper over 1 mm thick wall care putty on wall plastered surface complete all as specified and as directed.

S&F Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm complete all as specified and as directed.

M&L for preparation of new plastered surfaces of wall and applying two coats of cement base paint etc complete all as specified and directed.

M&L for Prepration of old surfaces of walls includinng scrapping down smoke ,soot,and efflorescent salts and treatings oil and gresy spots, brooming down or steel wire brushing removing nails making good holes cracks etc on plastered or unplastered surfaces and applying one coat of oil bound distemper on wall (white /ivory / tinted or any colour ) complete all as specified.

M&L for subsequent coat of distemper oil emulsion (white /ivory / tinted or any colour ) over one coat applied under Srl item No 14.00 here in before.

M&L for Prepration of old surfaces of walls includinng scrapping down smoke ,soot,and efflorescent salts and treatings oil and gresy spots, brooming down or steel wire brushing removing nails making good holes cracks etc on plastered or unplastered surfaces and applying one coat of white wash on walls complete all as specified.

M&L for Prepration of old surfaces of ceiling includinng scrapping down smoke ,soot,and efflorescent salts and treatings oil and gresy spots, brooming down or steel wire brushing removing nails making good holes cracks etc on plastered or unplastered surfaces and applying one coat of white wash on ceiling surface complete all as specified

M&L for preparation of old decorated plastered or unplastered wall surfaces including brooming down or steel wire brushging, scraping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of exterior emulsion paint (Apex of Asian Paints/Weathershield Projects of Dulux Paint or equivalent approved by GE complete all as specified and directed.

M&L for Prepration of old surfaces of walls includinng scrapping down smoke ,soot,and efflorescent salts and treatings oil and gresy spots, brooming down or steel wire brushing removing nails making good holes cracks etc on plastered or unplastered surfaces and applying one coat of cement based paint. complete all as specified and directed

M&L for writing letters or figures (block, roman, Italic or Indian) not exc. 30cm high with synthetic enamel paint such as P-02 P-39 OTM etc ) , ground of 150 dia complete all as specified and directed.

M&L for writing letters Stops, commas, short lines, dashes, hyphens, brackets, etc. as directed with synthetic enamel paint complete all as specified and directed.

S&F, in repair, Steel rolling shutters, thickness of laths 1mm thick, with out ball bearing, as specified including top cover, an-choring rod, hasp and staple including one shop coat of primer, and erected in position as indicated, push pull or manual type complete all as specified and directed.

Maintenance and overhauling of Steel rolling shutters (without taking down) opening size 3 to 8 Sqm by opening the top hood and cleaning, oiling, greasing and making free flow of shutters on its guide channels complete including cleaning, oiling, greasing of gear assembly all as directed and including two coats of synthetic enamel paint after preparatiopn of surfaces complete all as specified and directed.

Demolition of cement concrete (un-reinforced) in ground floors and pavings not exc. 15cm thickness (below or above ground level) all as specified and directed.

M & L machine pressed coloured chequered tiles of size 300 x 300 x 25 mm thick laid over 15 mm thick screed bed in CM 1:6 bedded and jointed in neat cement slurry incl dismantling / demolition and rubbish off the primises etc complete all as specified and directed.

M&L for plain cement concrete (1:4:8) type D2, using 40 mm graded stone aggregate as in foundation filling and mass concrete complete all as specified and directed.

S&F machine pressed coloured precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 Grade over 25mm thick sand cushioning and joint filled with dry sand, incl dismantling of stone slab and tiles of any description of thickness in floors/aprons etc complete all as spd and directed.

Description all as per srl item 27.00 here in before but except paver block shall be reused after necessary cleaning and making good all as specified.

M&l for kerb stone machine pressed coloured precast cement concrete (1:2:4) type B1 using 20mm graded stone aggregate, block of finished at top bullnosed shape and finished surface even and smooth using coloured pigment and jointed in CM 1:6 struck finished as directed.

S&F in repair 110 mm dia PVC (SWR ) pipes Single socketed in any length with rubber rings joints fixed to walls complete all as specified and as directed.

Taking down of eves gutter, rain water pipes of any size or pattern including all fittings etc complete all as specified and directed.

Material and labour for repairing of RCC projection, chajjas, facia, bands, shelves, beams, RCC railing, balcony and similar works by dismantling of loose/ disintegrated portion RCC at any height and in any sitution floor (including provn of support, formwork and welding of reinforcement if required with wire mesh of weight 3 kg/ sqm and dubbing/ filling with PCC (1:2:4), type B-0, using 12.5 mm graded aggregate, 15 to 25 mm thick after applying cement slurry @ 3 kg/sqm, finished even and smooth to desired shape and applying two coats of wheater proof emulsion paint to match with existing surfaces complete all as specified and directed.

M&L in repair for PVC hollow wall panelling 7 to 8mm thick any colour/design approved by engr-in-charge, inclusive of fixing on to wall incl moulding end caps fixed with PVC sleeves and screws as required at site complete all as specified and directed

M/S MAHAJAN CONSTRUCTION CO

Santokh Singh and Associates

GEE EMM ASSOCIATES

AS CONSTRUCTION

ss enterprises

tarlok singh contractor

Mahajan Builder

H.B AND CO.

Jaspal Construction Co.