C/O of Fencing and upgradation of Sub-Registar Office at Jammu Aishmuqam

Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: All kinds of soil :

P/L Stone soling/RBM i/c leveling , conslidation with 8-10T PRR including cost andcarriage of all materials involved (complete job).

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

Centering and shuttering including strutting, propping etc. and removal of form for: A) Foundations, footings, bases of columns etc. for mass concrete.

Reinforcement for RCC work i/c straightening cutting bending placing etc TMT bars Fe-500 or above

Structural steel welded in single sections trusses and framed work incld cutting hoisting fixing in position and applying a priming coat of approved steel primer/ paint all complete

Carriage of materials by Mechanical Transport by an avg lead of 30 Km a) Sand/Bajree

MAIN BUILDING P/L Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge:Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent.

Extra for providing glass panes ) of ordinary glass panes windows and clerestory window shutters wt 10 Kg/sqm (Area of opening for glass panes excld portion inside shall be measured)

Finishing with Deluxe multi surface paint system for interiors and exteriors using primer as per manufacturers’ specifications: Two or more coats applied @ 1.25 liter/10sqm over and including one coat of special primer applied @ 0.75liter /10sqm

Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixed with dash fastener of required dia. and size including necessary filling up of gaps at junctions i.e, at top, bottom and sides with required EPDM rubber / neoprene gasket felt etc. Aluminum sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminum snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge (glazing, panelling and dash fasteners to be paid for separately.)Anodized aluminum (Anodized transparent or dyed to required shade according to IS:1868, minimum anodic coating of grade AC 15)

Providing and fixing 12mm thick prelaminated particle board flat pressed three layer or graded wood particle board (conforming to IS: 12823 Grade-I type-II) in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in charge. Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side.

Providing and fixing glazing in aluminum door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineerin-charge. (Cost of aluminum snap beading shall be paid in basic item.) With float glass panes of 5.0 mm thickness (weight not less than 12.50 kg / sqm)

P/F 8mm thick plywood i/c framework of ordinary poplar wood in soffit , p/a priming coat with 2 coats of enamel paint complete

engagement of carpenter for refixing doors/windows , repairing of roofing etc

P/f CP fittings of standard make (ISI marked) JAQUAR or eq. : a) long nose bib cocks 15mm nb

b) angle cocks 15mm nb

c) CP tubes

Providing and fixing controlled flush, low level cistern made of vitreous china with all fittings complete: 10 liter (full flush) capacity-white

Providing and fixing 600x120x5mm glass shelf with edges round off supported on anodized aluminum angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs, etc. complete

Providing and fixing Polyvinyl Chloride (PVC) pipes( TYPE-B HEAVY DUTY), incl all PVC plain fittings This includes jointing of pipes ,trenching ,refilling & testing of joints complete as per direction of Engineer in Charge. a) 100mm

Providing and fixing PTMT grating of approved quality and colour. Circular type 100 mm nominal dia.

Supplying and fixing PVC cover 300x300 mm withframe for MANHOLE (standard pattern)

Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required :- White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer (HINDWARE /CERA/KEROVIT make)

Providing and fixing 25L geyser standard make (isi marked) i/c all fittings / fastenings