220/W/EDC II/SRE/2023-24

Amount

Detail of Work

Safely carriage of ST pole (13 Mtr. Long) from ESC, SRE to site of work at various sites including loading & unloading at both ends.

Safely carriage of other complete line material ACSR Rabbit Conductor/ABC Cable (Except ST Pole) from ESC, SRE to site of work at various sites including loading, unloading at both ends

Providing and Fixing of Stone Ped 300x300x75 as per RESPO specifications

Erection of single Support on ST Pole (13 Mtr. Long) with complete fitting with all accessories as per RESPO specification.

Erection of double on ST Pole (13 Mtr. Long) with complete fitting with all accessories as per RESPO specification.

Concreting of ST Pole with cement concreting in block of 600x600x1500 mm in ration 1:4:8 with cement sand and Brick ballast size 1x1.5 sq mm.

Concreting of Stay rod in block of 600x600x1500 mm in ration 1:4:8 with cement sand and Brick ballast size 1x1.5 sq mm.

Fixing of stay wire in block of 600x600x1500 mm in ration 1:4:8 with nozzing of stay wire properly with Pole.

Earthing of pole Complete by earthing Rod .

Providing & fixing of double Pole clamp on ST poles with nuts bolts made of new MS flat iron 50x6 mm as per RESPO specification.

Providing & fixing of X-arm holding clamps ST poles with nuts bolts made of new MS flat iron 50x6 mm as per RESPO specification.

Providing & fixing of F-brackets for ST poles with nuts bolts made of new MS flat iron 50x6 mm as per RESPO specification.

Providing & fixing of Suspension-Clamp for ST poles with nuts bolts made of new MS flat iron 65x6 mm as per RESPO specification.

Providing & fixing Dead & Clamp size 95/50 sq mm. for ST poles as per RESPO specification.

Providing & fixing of LT clamp with nuts bolts made of new MS flat iron 50x6 mm on PCC poles as per RESPO specification.

Providing and Fixing PRC connector size 50/35 sq mm.

Providing and Fixing of various type nuts bolts.

Providing and Fixing Al. crimping Lug 150 sq.mm & Al. Mech. Lug 240 sq mm. of best quality.

Fixing of Distribution Box of 3-Phase on ST Pole with Providing suitable clamp and connection above Distribution Box with ABC cable connecting jumpering including with service connection.

Fixing of 11 KV TPMO with polymer insulator.

Fixing of 11 KV 3 phase D.O fuse set.

Fixing MS Channel 100x50 mm as per RESPO specifications

Fixing MS Angle 65x65x6 mm as per RESPO specifications

Neutral & body Pipe Earthing of distribution T/F uo to 100 KVA.

Removal of 100 KVA T/F from the existing D/P after opening HT & LT connection and with shifting the T/F from the site to other site with loading & unloading at both ends.

Dismantling of PCC/ST Pole 8.5/11 Mtr. By crain opening of all accessories & shifting of JE/ESC SRE Store.

Re-dressing of Rod after removal PCC/ST Pole.

Laying, lifting, Stringing, sagging jumpring & binding of ACSR Rabbit Conductor for 11KV/LT Line as per RESPO specifications

Laying, lifting, Stringing, proper sagging ABC cable of size 3x50+1x35+1x16/ 3x95+1x70+1x16 sq.mm. including fixing of all accessories.

Safe installation of 100 KVA T/F on the double pole with complete fittings including making connections and commissioning.

Removal of Old & used ST Pole 11 Mtr long (02 No) & ACSR scrap (25 kg) & Iron Scrap ( X-arm, Channel,Angel etc) (250 Kg.) from the Existing 11 KV lines with making roll and carriage from site to JE store/ESC, SRE including loading and unloading at both ends.

off shooting of tree branching of 11 KV/LT Line.

GYAS PAL CONTRACTOR

M/s Raj Kishor Contractor