GES/PKT/10/2026-27 SPECIAL REPAIR TO BLDG NO T-11 (QM STORES) INCLUDING ELECTRIC SECTION AND MT OFFICE AND ROOF TREATMENT IN BLDG NO. NP-126 AND NP-127 AT FMSD UNDER GE SOUTH PATHANKOT

Demolition of brick work stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc, complete all as specified and directed.

M&L for Brick work with sub class 'B' bricks, straight or curved on plan exc 6m mean radius built in CM 1:4, complete all as specified and directed.

All as per description of item No. 2 but except bricks complete all as specified and directed.

Taking down cement plaster on brick or concrete surfaces any description including raking out joints hacking for key scrubbing down with water complete all as specified and directed.

M&L for Rendering 15mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces finishing the surfaces even & smooth without using extra cement including scaffolding upto 7 meter height and curing the surface, complete all as specified and directed.

M&L for Rendering 5mm thick in cement mortar 1:3 on concrete surfaces ceiling/ top and sides of chajjas/ facia of roof projection including necessary formwork including finishing the surface even and smooth without using extra cement complete all as specified and directed.

M&L liquid water proofing treatment to RCC roof slab incld dismantling of existing treatment of any description in following procedure : (a) Laying 10mm thick rendering in Cement mortar 1:4 mixed with WPC 3% by weight of cement on fair faces of concrete roof surfaces , finished even and fair to receive treatment on roof Complete (b) Applying first coat fiber reinforced elastomeric liquid water proofing membrane formulated with PU hybrid polymers and reinforcing acrylic fibers with sun reflective index (SRI) of 100-110, having minimum elongation of 350%, tensile strength 2.9 Mpa and shall have reack bridging ability upto 2.5mm and shall resist 10 bars of hydrostatic pressure reduce surface temperature upto 10 degree celsius with 3.3% dilution as priming coat (c) laying of fiber mesh 0.3mm thickness weave in leno pattern having weight 4.5 gm/ Sqm and pasting it properly with overlap of 50mm and allow it to dry (d) Applying second coat undiluted @ 0.45 ltr/ sqm as directed by Engr-in-Charge (e) Applying third and final coat undiluted @ 0.45 ltr/ sqm as directed by Engr-in-Charge. (The rate includes for filling cracks in existing roof with cement putty using suitable bonding agent (shalcrate 42) before laying cement plaster)

M&L for PCC 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregate) as in padding over roof slab for providing proper slabs, and finishing the surfaces even & smooth without using extra cement including demolition of cement concrete of any description, complete all as specified and directed.

M&L for Rendering 10mm thick on cement mortar 1:3 in facia or edging of chajjas, (width/ height not exceeding 45 cm) to protect movement of water inside and act in place of damaged drip course including preparation of new surface and applying two coats of cement base paint complete all as specified and directed.

M&L for Rendering 10mm thick in cement mortar 1:6 on fair faces of brick work or concrete surfaces finishing the surfaces even and smooth without using extra cement including scaffolding at any height and curing the surface, complete all as specified and directed.