PROVISION OF 04 NOS SECURITY WATCH TOWERS AT CGRA COMPLEX AT PARADIP

Amount

Schedule "A" Part – I to Schedule "A" Part –X: NOTE: Schedule "A" Part – I to Part – IX are prepriced by MES. Bidders shall insert their Lumpsum amount in Green coloured field under Column - 6 only

Lump Sum price worked out by the contractor for "BUILDINGS & STRUCTURES", for the lumpsum price of Rs. 37,00,000.00 inserted by MES as listed in Schedule 'A' Part - I on Serial Page No. 24 .

Price worked out by the contractor for "EARTH WORK, SITE CLEARANCE AND AREA DEVELOPMENT ", against the price of Rs. 4,37,930.70 inserted by MES as listed in Schedule 'A' Part - II on Serial Page No. 25 .

Price worked out by the contractor for "INTERNAL WATER SUPPLY ", against the price of Rs. 57347.84 inserted by MES as listed in Schedule 'A' Part - III on Serial Page No. 27.

Price worked out by the contractor for "INTERNAL ELECTRIC SUPPLY", against the price of Rs. 164117.16 inserted by MES as listed in Schedule 'A' Part - IV on Serial Page No. 29 .

Price worked out by the contractor for "EXTERNAL WATER SUPPLY", against the price of Rs. 23823.26 inserted by MES as listed in Schedule 'A' Part - V on Serial Page No. 30 .

Price worked out by the contractor for "EXTERNAL ELECTRIC SUPPLY", against the price of Rs. 594801.14 inserted by MES as listed in Schedule 'A' Part - VI on Serial Page No. 31 .

Price worked out by the contractor for "SEWAGE DISPOSAL", against the price of Rs. 216455.67 inserted by MES as listed in Schedule 'A' Part - VII on Serial Page No. 33(R).

Price worked out by the contractor for "ROAD/PATH/CULVERT", against the price of Rs. 97268.76 inserted by MES as listed in Schedule 'A' Part - VIII on Serial Page No. 34 .

Price worked out by the contractor for "RAFT FOUNDATION", against the price of Rs. 1858654.63 inserted by MES as listed in Schedule 'A' Part - IX on Serial Page No. 35 .

Schedule "A" Part - X [Miscellaneous Items]

INTERNAL WATER SUPPLY

Item No-01. Supply and fixing, 15mm bore fancy type chromium plated, bib taps, cast copper alloy, with 2 Way bib taps with wall flange ,screwed for iron pipe or for brass ferrule and fixed in repair.Make : Jaquar Alive 2 Way (VGP-81041) or equilavent as approved.

Item No-02. Supply and fixing 32mm PVC waste pipe for wash hand basin., 900mm long.

INTERNAL ELECTRIFICATION

Material and Labour for point wiring complete with multi-stranded copper conductor 1.5 sqmm size PVC HRFR insulated unsheathed cable 1100 Volt grade, conforming IS 694 & colour code in conduit system of wiring, drawn in including medium grade PVC conduit not less than 20 mm dia concealed, including cutting chases and making good disturbed surface complete, including single core solid conductor copper 1.5 sqmm size solid PVC insulated unsheathed cable as earth wire to common earth and connected to earth dolly drawn in same conduit complete all as specified.

(a) One light point/Fan point/bell point controlled by one way switch.

(b) One 3 pin socket outlet, 5/6 amps, on independent board.

(c) One lifg point controlled by one two way switch

All as per item No 3 here-in-before but with copper conductor 2.5 sqmm for One 3 pin socket outlet, 15 amps on independent board all as specified and directed.

Supply & fix LED tube light Fitting SmartBright extruded aluminium batten available in 4 ft run length with multiple lumen packages and suitable for surface, wall & conduit mounting with accessories complete all as specified and directed.

Supply & fix LED tube light Fitting SmartBright extruded aluminium batten available in 2 ft run length with multiple lumen packages and suitable for surface, wall & conduit mounting with accessories complete all as specified and directed. Make Philips Cat Part No BN021C LED22S PSU CW GR Eqv Crompton/ Havells or equivalent as per PS.

Supply, installation, commissioning and testing of 25 Litres capacity water heating system, storage type (GEYSER) ISI maked, electrical single phase, 230 volts, 50 Hz, BEE 5 star energy saving rated having stainless steel tank, metallic body and including making electric connection and grouting of bolts Pipe connections etc. as required at site complete all as specified and directed. Make: Havells Cat Part No GHWAICTWH025/Usha/ Racold or equivalent as per PS.

S & F 4 mm dia GI wire to connected building earthing to MCB DB Box complete all as specified and directed

EXTERNAL WATER SUPPLY

Shifting of existing pipe line CI/Diof size 80mm dia including cutting of existing Pipe line, complete fiting & fixture & excavation returning filling and removal complete all as specified and directed

Supply and laying of 80 mm dia ductile iron (DI) pipe spigot and socket ends class 'K-9' suitable for tyton joint or any length properly laid in trenches all as specified and directed.

EXTERNAL ELECTRIC SUPPLY

Supply and fix UPS for 60 min back up single phase AC input 160 to 260 V and out put 230 ± 1% of capacity 1 KVA including required recommended batteries Model SUA1000I-IN 1KVA/670Watt OF APC or equivalent of luminous/microtek/Exide It should be comprising of following specifications:- Type - Single phase, IGBT based, Online UPS Input - 240V±10% V AC, 50±5% Hz, Single phase-three wire (Phase+Neutral+Ground) Output Waveform - Sinusoidal Voltage Regulation - ≤ ±2% Inverter Efficiency - ≥ 80% Overload Capability - 110% for ≥10 Minutes Total Harmonic distortion (THDI) - <5% at Full load Transient response - Less than ±10% voltage variation at sudden application/removal of full load and it shall recover within 500msec. Environment - Approx.:0-50°C & 95% RH Charger - Charging mode shall be provided Battery Charging Voltage & Current shall be adjustable Line & load Regulation: ≤ ±2% Output Ripple : ≤ 3% Battery - Battery shall be of Sealed Maintenance (SMF) or VRLA type, Battery Backup shall not be less than 1 Hrs.at full load. Cap of Battery 18 AH, 12 Volt - 16 Nos Make :- Microtek/APC/Exide/ LUMINOUS. Note :- Make of Bty should be make of UPS only.

Material and Labour for sub main wiring complete with 2 single core multi stranded copper conductor 2.5 sqmm (Nominal area) PVC insulated unsheathed cable drawn in and including medium grade PVC conduit ISI Marked not less than 25 mm dia concealed, including making good distrubed surface, of wall, including single core multi stranded copper conductor 2.5 sqmm size as earth wire drawn in same conduit complete all as specified and directed .

Item No-13. M&L for earthing complete with galvanized steel earth plate 600x600x6 mm thick buried directly in ground (earth pit not less than 2.25 Mtr deep below normal ground level) with top edge of plate not less than 1.5 Mtr below normal ground level connected to galvanised iron strip 25×4mm dia by means of nuts/bolts and washers, check nuts and washer of galvanized iron or steel including 40 mm dia GI pipe light grade upto 1.5 mtr below ground level for protection pipe ,excavation and earth work charcole dust, common salt PCC 1:3:6 type C-I using 20 mm stone aggregate for chamber and MS angle iron frame 40x40x3mm and RCC cover 40 mm thick (1:2:4) type BI using 20 mm graded stone aggregate reinforced with 8 mm dia TMT bars @ 75 mm c/c both ways with MS handle 12 mm dia, round ,PGI funnel and wire mesh, 20 mm dia GI pipe light grade for watering all as shown in Plate no 3 of SSR Part I of 2009 and connected to earth test point incl testing complete all as specified and directed . Note :- Cost of earthing strip & GI pipe 25mm up to 7.5 m shall be included in cost of above item.

Supply, installation, testing and commissioning factory made LT feeder pillar box Outdoor type platform mounted of size 1000X800X450mm suitable for 415 Volts 3 phase 4 wire system 50 Hz supply having 04 Nos aluminum bus bar 150 Amps for phases and neutral, installed on porcelain / epoxy insulator. The panel shall be dust proof, vermin proof (IP54) and applying spray painting with two coats of syntheitc enameled paint over a coat of red oxide primer on sheet and made out of 3.15 mm thick CRCA sheet self moulded type and 50x50x6 mm angle iron frame front and rear opening with double shutter and locking arrangement with 50 mm lock and including grouting of panel with necessary PCC 1:2:4 type B-1 work complete all as specified. The scope of work includes provision of housing the following accessories

Outgoing ways :- (i) MCB TPN 63Amp - 04 Nos (For 03 Nos out going & 01 no Stand By)

Supply & installation testing and commissioning of totally enclosed LT Bus Bar Out Door type febricated out of 3.15mm thick CRCA sheet dust and verming proof powder coated double door type indipedent cabin including locking arrangement for suitable to operate on 415 Volt internally wired with copper conducter/strip of adequate size having legs 45 cm made out of 50x50x5 mm angle Iron grouted on brick masonery plate form of suitable size including all PCC finishing extra comprising of following items all as per directed. (1) MCB TPN 4 pole, 63Amp 10 KA -01Nos (As Incomer) (2) MCB TPN 4 pole, 25 Amp 10 KA- 03 Nos (For 02 Nos Out going & 01 No Stand By) (3) LED Indicating lamp (4) Aluminium Bus bar 100 Amp rating -04 Nos

S & F LED high beam revolving auto swivel search light luminaries 200 W with LED efficiency 130 lm/w and to be installed on rotating disc of revolving mechanism with suitable motor & speed reduction unit and design such to rotate 360 degree continuously over the night in horizontal plane. a seperate wall mounted wired control panel consist of MCB, V-METER, FUSE, LED indicators, speed controller ( 1 t0 10 RPM) Reverse-forward & auto, manual push buttons for smooth & safe operation remotely. The revolving mechanism is fully coverd with wheather & rust proof fiber box with maintenance window/door and provision of 04 nos foundation holes at bottom for proper installation (Make Kalin Cat Part No MRSL-LRFLL-25PC20 or equivalent, complete all as specified and directed .

boon construction company (BID ID -3083526)

PABITRA MOHAN PARIDA (BID ID -3085272)

RANA ENTERPRISES (BID ID -3085665)

DS ENTERPRISES (BID ID -3094082)