PROVN OF 08 x TOILET CUM BATHROOM 08 x URINAL POINT AT B COY OR LIVING AND ADDN ALTN TO ROOF TOP AS PCC PADDING FOR BLDG NO P 11 AT NR AND PROVN OF RATION STORE LPG STORE AT AMC C C UNDER GE EAST LUCKNOW

Amount

Surface dressing n exc 15 cm deep any type of soil complete all as specified and directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, laying of pipes, cable etc. n exc 10 sqm on plan and n exc 1.5 m in depth and getting out soft/loose type of soil complete all as specified and directed.

M&L Cement concrete1:4:8 type D2 using 40 mm graded stone aggregate in foundations, filling and mass-concrete complete all as specified and directed.

M & L brick work with fly ash bricks, straight or curved on plan exc 6M mean radius, old size brick built in cement mortar 1:6 complete all as specified and as directed.

M&L for brick work with flyash bricks, straight or curved on plan to any radius in half brick thick walls, built in cement mortar 1:4 complete all as specified and directed.

Returning filling in including spreading levelling watering and well ramming in layer not exc. 25 thick complete all as specified and directed.

Removing excavated materials n exc 50 m and depositing where directed at a level n exc 1.5 m above the starting point complete all as specified and directed.

M&L for rendering 15mm thick on other than fair faces of brick work in CM1:6,finished even and smooth without using extra cement complete all as specified and directed

M&L for rendering 15mm thick on fair faces of brick work in CM1:4 finished even and smooth without using extra cement complete all as specified and directed

M&L preparation of newly plastered surfaces and applying two coat of oil emulsion distemper (OBD) over 2 mm wall care puttyon Ceiling, approved shade/tint complete all as specified and directed

M&L preparation of newly plastered surfaces and applying two coats of cement base paint over a coat of 2mm thick wall care putty complete all as specified and directed

M&L for earth filling,spreading, leveling & compecting n exc. 30 cm thick Layer, watering, ramming/rolling and finishing to required size, shape,etc.n exc. 1.5m high from base complete all as specified and directed

M&L for 100 mm thick PCC 1:4:8 type D2 using 40 mm graded stone aggregate as in subbase of floor/path/pavement complete all as specified and directed

M&L Non - skid coloured Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile Size 300x300 mm in floors etc. set and jointed in neat cement slurry andpointed in white or coloured cement to match . laid over 15 mm thick screed bed in CM 1:6, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed

M&L for glazed coloured ceramic tiles in vertical surface 300x450mm x 7mm thick, laid over 15 mm thick rendering in CM 1:4, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed

Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 30mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed

M&L for 75 mm thick PCC 1:3:6 type C2 using 40 mm graded stone aggregate finished even and smooth witthout using extra cement as in plinth protection/path complete all as specified and directed

M&L for 40 mm thick PCC 1:2:4 type B1 using 20 mm graded stone aggregate including water proofing compound as in DPC complete all as specified and directed

S&F GI tubing of size 20 mm dia, medium grade, laid in floors/walls complete all as directred and as speicified

S&F GI tubing of size 15mm dia, medium grade, laid in floors/walls complete all as directred and as speicified

S&F for Vitreous china (Counter type) WHB White (C, size 380 x 380 x150 mm with waste coupling waste pipe of 32mm dia all as specified and directed.

M&L for Granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete all as specified and directed

S & F Vitreous china Squatting pan, indian pattern, size 580 x 440mm white, with integral foot rest in cluding 'P' or 'S' trap complete, fixed in repairs complete all as specified and directed

S&F Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) complete all as specified and directed

S&F health faucet for EWC CP hand hold with flexible pipe complete set complete all as specified and directed.

S&F in repairs vitreous china urinal half stall type white excluding flushing cistern ,flush pipe and waste pipe complete all as specified and directed

S&F for Conclusive Push taps of cast copper alloy, screwed for iron pipe and fixed, (Minimum weight 15mm-47gms/ 20mm- 75gms) complete all as specified and directed

S&F for 75/100 mm out let PVC (SWR) floor trap, plain with CP grating including jointing with solvent cement complete all as specified.

S&F in repairs 32mm dia PVC waste pipe approx 900mm long for sink/WHB complete all as specified.

S&F PVC connection 450mm long with PTMT nuts and PVC washer complete all as specified and directed

S&F for Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed

S&F 10 liters capacity PVC low level flushing cistern including brackets complete, fixed in repairscomplete all as specified and directed

S&F bib taps 15 mm chromium plated fancy type, cast copper alloy screwed pressure,screwed both ends for iron pipe for unions and fixed

S&F for stop valves/angle valve, cast copper alloy screwed pressure, with crutch of butterfly handle, screwed both ends for iron pipe for unions and fixed complete all as specified and directed

S&F 125 mm dia CP brass with arms shower rose with or without swivel joints any size including fixing to steel pipe or union complete all as specified and directed

S&F tubular towel rail, 20mm dia D type 60cm long between flanges of brass chromium plated complete all as specified and directed

S&F 75mm dia PVC floor trap with grating fixed in position complete all as specified and directed

S&F for PVC (SWR) pipes 75mm dia laid in floor or in trenches, single socketed with rubber ring joints complete all as directed and as specified incl dismantling of old pipes complete all as specified and directed

S&F for PVC (SWR) pipes 110mm dia laid in floor or in trenches, single socketed with rubber ring joints complete all as directed and as specified incl dismantling of old pipes complete all as specified and directed

S&F for 75mm PVC (SWR) bends any radius complete all as specified and directed

S&F for 110mm PVC (SWR) bends any radius complete all as specified and directed

S&F for PVC (SWR) reducers any radius complete all as specified and directed

S&F for PVC (SWR) vent cowl any radius complete all as specified and directed

S&F for 75 mm PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed

S&F for 110 mm PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed

S&F for 110 mm PVC (SWR) 'S' trap complete all as specified and directed

S&F for 110 mm PVC (SWR) 'P' trap complete all as specified and directed

S&F for 500 Litre capacity Rotational moulded polyethylene water storage tanks triple layered (cylindrical vertical with closed top) ISI marked, hoisted & fixed in position & making necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe etc incl dismantling. complete as specified in SSR Part-I complete all as specified and directed

S&F Ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball, screwed for iron pipe 20mm bore (minimum weight 210 gms) complete all as specified and as directed.

S&F solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, supplying & fixing in opening as per specification & drawing

S&F factory made solid panel pace door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel heaving a PVC sheet strip of 20mm width suck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing.

S&F steel ventilators with centre hung shutter including hinges, steel peg stay, complete all as specified and directed

S&F 3mm thick sheet glass ordinary quality and glazing with oil putty/beads in square not exc 0.5 Sqm in each pane complete all as specified and directed

S&F plain, solid, straight chowkats and frames of second class hardwood, wrought, framed rebated on the solid rounded or chamfered, put together with glue, pinned at joints, complete all as specified & directed.

S&F 30mm thick flush shutter, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

S&F butt hinges 100mm, medium weight, cold rolled mild steel, and fixed complete all as specified and directed

S&F aluminium, anodised, barrel tower bolts 150mm of extruded section and fixed complete all as specified and directed

S&F aluminium handles 150mm, cast type, anodised complete all as specified and directed

S&F steel locking bolts with mild steel electrogalvanised plate and bright bolt not less than 10mm dia, 100mm size complete all as specified and directed

S&F 300 mm long aluminium alloy, anodized, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified.

S&F for Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-24 complete all as specified and directed

S&F pre-painted galvalume aluminium zinc coating GI based corrugated sheet 0.50 mm thick of any colour having tensile str of 550Mpa as in roof covering/cladding to walls,fixed with self tapping screws complete all as specified and directed

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed

S&F aluminium snap grid of size 605X605 mm frame work for false ceiling all as specified with and incliuding 4 mm thick non- asbestos fibre cement building boards fixed or laid/inserted to timbber/GI/Aluminium framework with screws as in ceiling complete all as specified and directed

M&L for preparation of new steel and iron surfaces of any description over 10 cm width or girth and applying two coat of synthetic enamel paint complete all as specified and directed

M&L for RCC 1:1/2:3 (20mm graded stone aggregate) as Lintel band etc.complete all as specified and directed

M&L TMT bars of 6 to 8mm dia and over cut to lenth, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed

M&L for TMT bars 10 mm dia and over for reinforcement cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, and binding with and incl MS wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to Fe-415 or Fe-500 complete all as specified and directed.

Formwork to sides and soffits of lintels & beams including supports overhangs etc with rough finished surfaces of concrete complete all as specified and directed

S&F Stainless steel peg set consisting of 6 pegs on aluminium flat of standard section complete all as specified and directed

S&F 150mm internal dia, UPVC drain pipe grade ‘A’, laid in trenches and jointed with cement joints complete all as specified and directed

M & L for concrete bed to drain pipes of 150 mm dia incl packing under and haunching against the sides of pipes with concrete, after they are laid in cement concrete 1:3:6 typer C2 and testing including necessary form work complete all as specified and directed

M & L for PCC 1:3:6 type C-2 (suing 40 mm graded stone aggregate in foundation of manholes complete all as specified and directed

M & L for PCC 1:2:4 type ‘B1’ (using 20mm graded stone aggregate) in coping, benching of manholes etc and including necessary formwork complete all as specified and directed

M&L for RCC 1:2:4 type ‘B1’ (using 20mm graded stone aggregate) in precast manhole cover and cover slab for septic tanks and including necessary forms and moulds etc and set in cement mortar 1:6 and including demolition of old slab complete all as specified and directed

M&L for 25 User LLDPE septic tank designed to carry sewage and sullage water, excavation in any type of soil, PCC 1:4:8 below foundation, Vent shaft, connection etc, complete for 25 User complete all as specified and directed

M & L for Soakage well ells exc, in hard soil, foundation in PCC 1:3:6 wells of honey combed bricks work in CM ,RCC Cover slab Filling with bricks bats, complete of size 1.80M dia X 3.00M deep complete all as specified and directed

Dismantling brick coba/exsting treatment, on roofs complete all as specified and directed.

M&L for PCC 1:2:4, type B-1 (using 12.5 mm graded stone aggregate) as in roof for maint the uniform slope etc any thickness at any height and in any position, complete all as specified and directed.

M&L for rendering 20mm thick on other than fair faces of brick work in CM1:4, finished even and smooth without using extra cement for roof treatment complete all as specified and directed

Supply only integral water proofing compound complete all as specified and as directed.

M&L for roof/sunken treatment with polymeric water proofing membreane with certain specification given below as under complete all as specified & directed (a) M&L plastering 10mm in CM 1:4 using 100% course sand on roof including WPC @ 3% by weight of cement. (b) Applying a coat of bitumenous primer @ 0.50 LTRs /Sqm and allow to dry (c) Applying a coat of hot blown bitumen grade 85/25 @ 1.20 Kg/Sqm. (d) Supply and laying APP based polymeric water proofing membrane, weight not less than 3.00 kg/sqm and and minimum 3 mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) sealed the side laps with spread temper (e) applying a tack coat of hot blown bitumen grade 85/25 @ 1.20 Kg/Sqm Note : The net area of water proofing treatment shall be measured without any extra allowance for laps & portion inserted in groove which shall be deemed included in the quoted rates.

M&L for PCC 1:2:4, type B-1 (using 20 mm graded stone aggregate) as in roof kerbs / benching / coving and roof padding over roof surfaces /sunken treatment etc rounded or chamfered on edges, complete all as specified and directed.

Surface excavation not exceeding 30cm deep and averaging 15cm deep and getting out in hard/dense soil complete all as specified and directed.

M&L for hard core broken bricks of gauge n. exc. 63mm, deposited, spread and levelled in layers n. exc. 15cm thick, water and rammed to a true surface complete all as specified and directed.

M& L for Sand filling under floor spreading and levelling in layers n exc 25 cm thick for well ramming watering required complete all as specified and directed .

M&L for rendering 10 mm thick in cm 1:4 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.

M&L 5mm thick rendering in cement mortar in CM (1:3) on ceiling finished even and smooth without using extra cement, complete all as specified and directed.

M&L for RCC 1:1½ :3 type A1(using 20 mm graded stone aggregate) as in foundations, footings, plinth beams; bases for columns, etc.complete all as specified and directed

M&L for RCC 1:1½ :3 type A1(using 20 mm graded stone aggregate) as in Column, pillars, piers, posts and struts etc complete all as specified and directed

M&L for RCC type B-1 (1:2:4) using 20 mm graded stone aggregate on beams, cantilevers, lintel over 1.5 m Span complete all as specified and directed.

M&L RCC type B-1 (1:2:4) using 20mm graded aggregate in slab supported on wall walls beams and columns in floors roof landings complete all as specified and directed.

M&L 75 mm thick PCC 1:4:8 type D-2 using 40 mm graded stone aggregate as in sub base of floor/pavings complete all as specified and as directed.

M&L TMT bars of 5 mm dia and over up to and including 10 mm dia in stirrups, spacers and binders etc and including mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed complete all as specified and directed.

M&L for formwork to sides of concrete in foundations, footings, bases of columns, sides and soffits (if any) plinth beams, and similar work complete all as specified and directed

M&L for formwork to sides of concrete of pillars, posts, struts, piers, columns etc complete all as specified and directed

M&L form work for flat fair finished surfaces of concrete to soffits of suspended slabs such as roof slab not exceeding 200mm thick complete all as specified and directed.

M&L for machine cut kota sotne slab, 20-25mm thick over and including 15mm thick screed bedding in cement mortar 1:6 as in floors, laid & jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified.

M&L for machine cut kota sotne slab in skirting / steps / risers of reqd size, 20 to 25mm thick & including 15mm thick screed bedding in cement mortar 1:4 as in floors, laid & jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

M&L for brushing neat cement slurry with 3.0 Kg./Sqm over roof slab complete all as specified and directed

S&F pressed steel frame for door with one or more rebates size 125x60mm including necessary fixing lugs, lock striking plates, hinges, hold fast etc. incl filling with concrete type B0 1:2:4 (12.5 mm graded aggregate) complete all as spcefied and directed.

S & F for steel windows with side hung shutters including projection type hinges with steel handle, and steel peg stay complete with glazing bars, dovetailed and welded, complete all as specified and directed.

S & F for steel windows with side hung shutters including projection type hinges with steel handle, and steel peg stay complete without glazing bars, dovetailed and welded, complete all as specified and directed.

S & F for 35mm thick glazed and skeleton shutters made of second class hard wood, open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc., sizes of members of shutters as specified in clause 8.24 (a) of Section 8 in SSR Part-I, kiln seasoned and chemically pressure treated, fixed to chowkat, complete all as specified & directed.

M&L for PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in copings, bed plates, plinth courses, parapets and the like including weathering, slightly rounded or chamfered angles and throating including use and waste of necessary form work etc complete all as specified.

M&L for preparation of new or previously untreated wood and wood based surfaces of any description not otherwise descriped over 10 cm width girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L for preparation of new steel and iron surfaces of any description over 10CM width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L preparation of newly plastered wall surfces and applying three coats of white wash complete all as specified and directed.

M&L for applying two coats of weather proof acrylic emulsion paint over a coat of 1mm thcik wall care putty & including a coat of emulsion wall primer all as per manufacture's instructions & as directed by Engr-in-Charge. Make :- Asian / Apex / Berger (Weather coat all Guard)

M&L for preparation newly plastered ceiling surfaces and applying three coat of white wash complete all as specified and directed.

S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of apertature 1.40mm and fixed with tinned tacks or stainless steel wire staples all as specified and directed.

M&L for machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 grade with grey cement and pigment coloured, reflective type of approved quality laid over and including 25mm thick sand cushioning vibrated with mechanical vibrator complete all as specified and directed.

M&L for cutting holes in brick walls (n exc half brick) for inserting hold fasts and making good dismantled portion in PCC 1:2:4 (20mm aggregate) and cement mortar 1:3 complete all as specified and directed.

M&L for mild steel work such as hold fasts, hooks, clamps etc and similar work conforming to Fe 290 , Gde -165 complete all as specified and directed.

S&F 140mm floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor, complete all as specified and directed.

Material and labour for one light / fan point controlled by one, one way switch 06 Amp wiring with 1.5 Sq mm nominal cross sectional area, single core, 1100 Volt grade, multi-stranded, PVC insulated, unsheathed FRLS copper conductor cable with and including continuous earth wire of size 1.5 Sq mm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable and connected to common earth and earth dolly with suitable copper lugs and drawing into and including rigid non-metallic PVC conduit of 20 mm dia or higher, medium grade complete with and including all PVC conduit accessories concealed into wall by cutting of chases in wall and replacement of sunk zinc coated pressed steel terminal box of 1.60 mm thick with 3 mm thick plastic laminated sheet top cover, brass screws, cup washers etc and making good to the disturbed surfaces to match the existing complete all as specified and directed.

All as per serial item No 117 here-in-before but one 3 pin, 06 Amp socket outlet point on independent board controlled by one, one way switch 06 Amp.

All as per serial item No 117 here-in-before but one 3 pin, 06 Amp socket outlet point on same board controlled by one, one way switch 06 Amp.

All as per Serial Item No 117 here-in-before but point wiring with 2.5 Sq mm single core FRLS cables and earth continuity wire of 1.5 Sq mm single core FRLS cable for one 3 pin 16 Amp socket out let point controlled by one, one way switch on independent board complete all as specified and directed.

Supply and fix frame plate with match cover one module plate complete all as specified and directed.

All as per item No 121 above but two module complete all as specified and directed and directed.

All as per item No.121 above but three modulecomplete all as specified and directed.

All as per item No.121 above but four module complete all as specified and directed.

All as per item No.121 above but six module complete all as specified and directed.

All as per item No.121 above but eight module complete all as specified and directed.

Supply and fix terminal box suitable one modular plat of size 75X75x50 mm including cutting, grooving and plastering etc. complete all as specified and directed.

Supply and fix terminal box suitable two modular plat of size 75X75x50 mm including cutting, grooving and plastering etc. complete all as specified and directed.

All as item No 128 above but three modular plat of size 100X75x50 mm including cutting, grooving and plastering etc. complete all as specified and directed.

All as item No 129. above but four modular plat of size 128X75x50 mm including cutting, grooving and plastering etc. complete all as specified and directed.

All as item No 130. above but six modular plat of size 210X75x50 mm including cutting, grooving and plastering etc. complete all as specified and directed.

All as item No 131. above but eight modular plat of including cutting, grooving and plastering etc. complete all as specified and directed.

Supply and fix Modular switch one way 6A 230V AC 50 HZ SP one module complete all as specified and directed.

Supply and fix Modular switch one way 16A 230V AC 50 HZ SP one module complete all as specified and directed.

Supply and fix Modular socket 2/3 pin combined 6A 230V AC 50 HZ SP two module complete all as specified and directed.

Supply and fix Modular socket 6A/16A 2/3 pin combined 230V AC 50 HZ SP two module complete all as specified and directed.

Supply and fix ceiling rose, 6 Amp, 250 volt, AC, ISI marked with three equal size terminals and PVC / Polycarbonate insulated body of 50 x 25 mm size complete all as specified and directed.

S&F in repair MCB DB SPN (double door) 8 Ways including bus bar neutral link, earth bar and din rail, recessed with wall surfaces by chase cutting and making good surfaces of wall complete all as specified and directed.

S&F in repair MCB DB TPN (double door) 4 Ways, 415 Volts including bus bar neutral link, earth bar and din rail, recessed with wall surfaces by chase cutting and making good surfaces of wall complete all as specified and directed.

S&F in replacement MCB, single pole, 240 Volts, of capacity (6-32 Amps) as ordered breaking capacity 10 KA complete all as specified and directed.

S&F in repair MCB SPN, 6 to 32 Amps, 240 Volts , breaking capacity 10KA complete all as specified and directed.

Supply and fix TPN DB 4 ways with 415 Amps rated bus bar 240Volt, Double door type complete all as specified and directed.

Supply and fixing MCB TPN 63 Amps 240 V, C- curve, 50 Hz, breking capacity-10 kA . complete all as specified and directed

Supply and fix SPN MCB DB 8 ways with 200 Amps rated bus bar 240Volt, Double door type complete all as specified and directed.

S&F in replacement TPN three pole 415 volts100 Amps repturing capacity 25KA complete all as specified and directed.

M&L for sub main wiring with 04 Sq mm nominal cross sectional area, two single core, 1100 Volt grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable with and including continuous earth wire of size 04 Sq mm nominal cross sectional area, single core, 1100 Volt grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable and connected to common earth and earth dolly with suitable copper lugs and drawing into and including rigid non-metallic PVC conduit of 25 mm dia, medium grade complete with and including all PVC conduit accessories concealed into wall by cutting of chases in wall and making good to the disturbed surfaces to match the existing including taking out the unserviceable sub main wiring complete all as specified & directed.

M&L for sub main wiring with 06 Sq mm nominal cross sectional area, two single core, 1100 Volt grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable with and including continuous earth wire of size 06 Sq mm nominal cross sectional area, single core, 1100 Volt grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable and connected to common earth and earth dolly with suitable copper lugs and drawing into and including rigid non-metallic PVC conduit of 25 mm dia, medium grade complete with and including all PVC conduit accessories concealed into wall by cutting of chases in wall and making good to the disturbed surfaces to match the existing including taking out the unserviceable sub main wiring complete all as specified & directed.

S&F in lamp Holder(ISI Marked) PVC/Polycarbonate type with back plate suitable for batten fittings, complete all as specified and directed.

S&F LED tube light fittings 24 W extruded aluminium housing abs end cap PC diffuser voltage protection 140v-270v cct-6500k, surge protection 2.5 kv cri>80, 100lm/w lumen 2400 complete all as specified and directed.

S&F in replacement 600mm, 10 watt LED Mirror light fitting complete all as specified & directed.

S&F LED bulb 9/15 Watt B 22 CDL complete all as specified and directed.

S&F in replacement/ repairs of of stationery storage type electric water heater storage ,capacity 50 ltrs ,BEE 5 star rated operated on 230 volts AC Vertical type working pressure 0.8 Mpa with multi funtion saftry valve and PUF installation including 4 Nos full threaded fastener of size 100x10 mm with two washer water connection with two no flexible steel hose pipe of size 15 mm 450 mm lengh and suitable plug top of 16 Amp capacity including required pipe connection with the pipe line of internal water supply complete all as specified and directed.

S&F in replacement LED building security light 36W IP 65 including one number MS clamps made of 25X3 mm flat iron with bracket of GI pipe light grade 25mm dia and length not less than 1.2 mtr end of GI pipe suitable for street light fitting, connecting with three core copper flexible wire 23/0.0076 complete all as specified and directed

Supply and fix single pole and neutral sheet metal enclosure with a two pin and earth plug and socket complete with one 20amps SPN MCB complete all as specified and directed.

Supply and fixing Exhaust fan 300 mm sweep steel body fix existing wall complete all as specified and directed.

Supply and fix LED tube light fittings 1200 mm,22/20W higher energy saving decorative ultra slim square profile LED lighting fixture with extruded aluminium housing enviromental friendly, energy efficient complete all as specified and directed.

Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and directed.

S&F of exhaust fan single phase, 230/240 Volt heavy duty of size 300 mm sweep 1400 RPM including suitable louvers and making connection with twisted copper flexible wire 23/0.076mm complete all as specified and directed.

Supply and fixing in replacement LED Bldg security light fitting LED 45 watt, 5700 K with IP 66 protection including 1.5 sqm x3 core copper conductor,epoxy coated cover sheet aluminium housing with heat resistant toughtened glass & incl with suitable bracket of 1.5 m in length and 40x5 mm flat iron nessary nut & bolts complete all as specified and directed and directed.

Supply, laying and testing cable XLPE insulated, screened PVC bedded galvanised steel strip or wire armoured electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 25 sqmm 4.0 core complete all as specified and directed.

Supply, laying and testing cable XLPE insulated, screened PVC bedded galvanised steel strip or wire armoured electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 16 sqmm 3.0 core complete all as specified and directed.

Supplying, filling in trenches, spreading, leveling sand cushioning 8 cm below cable and 15 cm above the cable for under ground cable complete all as specified & directed. i.e 18 cm punned down thick shall be considerd for mesurement) complete all as specified and as directed

M & L Old size sub class 'B' bricks,laid flat in trenches over the cable with length of brick perpendicular to the direction of the cable , adjacent/abutting each other complete all as specified and directed.

M/s Ramesh Chandra

M/S KAUSHIK CONSTRUCTION

QUALITY CONSTRUCTIONS CO