Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹3.1 CrAccepted-AOC 0 0 0 NEAR DAK BUNGLOW NH 1 A NH 1A UDHAMPUR UDHAMPUR JAMMU KASHMIR 182101 | UDHAMPUR | JAMMU AND KASHMIR | 182101 | ₹3.1 Cr | L1 | Accepted-AOC Technically qualified and quoted lowest rate |
| 2 | L2₹3.1 Cr+₹4.4 L (1.42%)Rejected-AOC 143 SHASTRI NAGAR LAKHIMPUR KHERI | ₹3.1 Cr+₹4.4 L (1.42%) | L2 | Rejected-AOC Technically qualified and quoted higher rate than L1 |
| 3 | L3₹3.1 Cr+₹5.6 L (1.82%)Rejected-AOC KUKUHAWA POST GAURABADSHAHPUR JANPAD JAUNPUR | ₹3.1 Cr+₹5.6 L (1.82%) | L3 | Rejected-AOC Technically qualified and quoted higher rate than L1 |
Tender Value
₹3.2 Cr
EMD Value
₹6.3 L
Closing Date
30 Dec 2022, 3:00 pmClosed
SE Sixth Circle IW Lucknow
Office of SE Sixth Circle IW Lucknow
Construction of Bridge on Hardoi Branch at Km 175.000 in District Hardoi
2022_UPIDC_759710_1
06/SE-6/2022-23 (Lot-2)
Open Tender
Civil Works - Bridges
Item Rate
360 days
Hardoi
AS per pre qualification doucment
4 documents required · 4 mandatory
₹2,354
₹6.3 L
Yes
22 Feb 2023
16 Dec 2022
30 Dec 2022
16 Dec 2022
30 Dec 2022
16 Dec 2022
Amount
E/w in cutting in foundation of Culvert / Guide wall on channels above 10 Cumecs including lead upto 30 M. And lift upto 1.5 M and disposal and back filling as per Drawing & direction of engineer-in-charge.
Hiring & engaging Diesel Pump of 5 H.P. with POL For Dewatering at site.Workdone as per direction of Engineer-in-charge.
Laying Plain Cement Concrete (M -10) in foundation 1:3:6 with 20-40mm stone grit including cost of material, labour, T&p etc, complete.Workdone as per as per Drawing & direction of engineer-in-charge.
Centring and shuttering For R.C.C. Work including rent of shuttering & all cost of labour and material T&P etc. required for porper completion of the work/M2.For bridge slab above 3.00m span.Workdone as per as per Drawing & direction of engineer-in-charge.
Bending,Binding,Cutting and Placing in position reinforcement including all cost of labour and material T&P etc. required for porper completion of the work/MT.Workdone as per as per Drawing & direction of engineer-in-charge.
Laying Plain Cement Concrete (M -10) in foundation 1:3:6 with 20mm stone grie including cost of material, labour, T&p etc, complete.Workdone as per as per Drawing & direction of engineer-in-charge.
Laying Reinforced Cement Concrete ( M25 ) in Raft , Abetment , Pires Guide/ w. Wall etc. in 1:1.60:3.20 with Superplasticizer (Admixture) 0.2% , WC 0.4 , 8.06 bag Cement with Coarse Sand & 10 mm - 20mm Kabrai stone Aggregate by using batching plant transit mixer & Concrete pump including cost of all material, labour, T&p etc, complete.Workdone as per as per Drawing & direction of engineer-in-charge.
Laying Reinforced Cement Concrete ( M30 ) in Slab , Wearing Coat,Parapet,kerb etc. in 1:1.60:3.20 with Superplasticizer (Admixture) 0.3% , WC 0.4 , 8.13 bag Cement with Coarse Sand & 10 mm - 20mm Kabrai stone Aggregate by using batching plant transit mixer & Concrete pump including cost of all material, labour, T&p etc, complete.Workdone as per as per Drawing & direction of engineer-in-charge.
Dry brick on edge Soling including preparation of sub grade and filling joints with local sand including cost of Material,Labour T&P etc.Workdone as per as per Drawing & direction of engineer-in-charge.
Cement Washing & Finishing walls with Premium Acrylic Smooth exterior paint ( apex Ultima,wethercoat, all Gard) including cost of all material and labour T&P etc required for proper completion of work
Earth work in filling for making embankment with approved material obtained from borrow pits with a lift upto 1.5m. Transporting to site. Spreading, grading to required slope and compacting to meet requirement of Tables 300.1 & 300.2 With Lead Upto 1000M As per MoRD TS 301.5.
Class 150 Brick work in 1:4 CM including 3 M lift and 60 M lead including all cost of material, labour, T&P etc. complete.Workdone as per as per Drawing & direction of engineer-in-charge.
Earth work in Making of Cutting Or removing bund diversion i/c all lead & lifts inluding cost of labour, T&p, machinery P.O.L etc. complete. for proper completion of work.Workdone as per as per direction of engineer-in-charge.
Providing & laying 110 mm PVC pipe For drainage spouts complete in all respect including cost of all material, labour and T&P etc. as per drawing. Workdone as per as per Drawing & direction of engineer-in-charge.
P / Fixing of a compression Single Strip Box seal expansion joint as per approved drawing and confirming to IRC SP-69-2011 & Relevent IS Coads including cost of all material, labour and T&P etc. complete.Workdone as per as per Drawing & direction of engineer-in-charge.
Supply & Laying one layer of tarfelt / Membrane below For deck slab , Abutment & Approch Slab with all material & labour T&P etc. complete.Workdone as per as per Drawing & direction of engineer-in-charge.
Supplying and fixing of Wheel Gard(L-1100x300Dia,12mm 8 no. main bar,8mm Ring with RCC-M25) including ,Earth work and fixing in position with CC M15 (600x600x400mm) in 1:2:4 with stont grit .(all work Done as par direction of Engineer-in- charge) including cost of all material, Labour T&P etc .
Providing & Fixing 75 mm dia PVC weep holes complete in all respect including cost of all material, labour and T&P etc. Workdone as per as per Drawing & direction of engineer-in-charge.
Providing & fixing of signs/display board as per direction of work incharge including material, labour,t&p etc complete.Workdone as per as per direction of engineer-in-charge.
Providing and laying Filter material with brick ballast underneath pitching in bed complete as per drawing and MoRTH Technical specification 2504 including material, labour,t&p, machinery etc complete. Workdone as per as per direction of engineer-in-charge.
Providing and laying Pitching on slopes laid over prepared filter media including boulder apron laid dry in front of toe of embankment complete as per drawing and MoRTH Technical specification 2504.Workdone as per as per direction of engineer-in-charge.
Providing and laying boulders apron on Canal bed for protection against scour with stone boulders weighing not less than 40 kg each complete as per drawing and MoRTH Technical specification 2503.Workdone as per as per direction of engineer-in-charge.
Construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller to achieve the desired density, complete as per MoRD Technical Specification Clause 401.Workdone as per as per direction of engineer-in-charge.
Providing ,Laying ,spreading and compacting stone aggregates of 63-45 mm size to water bound macadam specification including spreading in uniform thickness , hand packing ,rolling with Smooth wheel roller 80-100 KN in stages to proper grade and camber ,applying and brooming ,Stone screening,binding materials to fill up theinterstices of coarse aggregate ,watering and compacting to the required density complete as per MoRTH Technical Specification Clause 404.Including All Cost of Labour,Material and T&P etc. required for Proper Complition of Work.Workdone as per as per direction of engineer-in-charge.
Providing ,Laying ,spreading and compacting stone aggregates of 53-22.4 mm size to water bound macadam specification including spreading in uniform thickness , hand packing ,rolling with Smooth wheel roller 80-100 KN in stages to proper grade and camber ,applying and brooming ,Stone screening to fill up the nterstices of coarse aggregate ,watering and compacting to the required density.complete as per MoRTH Technical Specification Clause 404.Including All Cost of Labour,Material and T&P etc. required for Proper Complition of Work.
Providing and applying primer coat with bitumen emulsion on prepared surface of granular Base including clearing of road surface and spraying primer at the rate of 0.70 kg/sqm using mechanical means.complete as per MoRTH Technical Specification Clause 502.
Providing and applying tack coat with bitumen VG-10 using Bitumen pressure distributor at the rate of 0.30 kg per sqm on the prepared bituminous/granular surface cleaned with mechanical broom.complete as per MoRTH Technical Specification Clause 503.Workdone as per as per direction of engineer-in-charge.
Providing, laying and rolling of open - graded premix surfacing of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using penetration grade bitumen or cut-back or emulsion to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a smooth wheeled roller 8-10 tonne capacity, finished to required level and grades.Complete as per MoRTH Technical Specification Clause 510.Including All Cost of Labour,Material and T&P etc. required for Proper Complition of Work.Workdone as per as per direction of engineer-in-charge.
Providing and laying seal coat 'C' Type sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall .Complete as per MoRTH Technical Specification Clause 511.Including All Cost of Labour,Material and T&P etc. required for Proper Complition of Work.Workdone as per as per direction of engineer-in-charge.
M/s Nav Bharat Construction
VIJAY KUMAR SINGH
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .