Installation of Kanaipal new Major RLI Scheme at G.P.-Beltikri, Mouza-Lalgarh and Kanaipal, J.L.No.-790,Plot No.-519/651, Binpur-I Block of Jhargram District under Executive Engineer (A-M), Midnapore(A-M) Division under Core-Sector 25-26.

Construction of Pump House at Kanaipal new Major RLI Scheme at G.P.-Beltikri, Mouza-Lalgarh and Kanaipal, J.L.No.-790,Plot No.-519/651, Binpur-I Block of Jhargram District under Executive Engineer (A-M), Midnapore(A-M) Division under Core-Sector Programme for the Financial Year 2025-2026.,Project ID- WI252641142S000. ( Please see the details in PH)

Internal Wiring of Pump House at Kanaipal new Major RLI Scheme at G.P.-Beltikri, Mouza-Lalgarh and Kanaipal, J.L.No.-790,Plot No.-519/651, Binpur-I Block of Jhargram District under Executive Engineer (A-M), Midnapore(A-M) Division under Core-Sector Programme for the Financial Year 2025-2026.,Project ID- WI252641142S000. ( Please see the details in IW)

Laying of WTA at Kanaipal new Major RLI Scheme at G.P.-Beltikri, Mouza-Lalgarh and Kanaipal, J.L.No.-790,Plot No.-519/651, Binpur-I Block of Jhargram District under Executive Engineer (A-M), Midnapore(A-M) Division under Core-Sector Programme for the Financial Year 2025-2026.,Project ID- WI252641142S000. ( Please see the details in WTA)

Procurement of Material at Kanaipal new Major RLI Scheme at G.P.-Beltikri, Mouza-Lalgarh and Kanaipal, J.L.No.-790,Plot No.-519/651, Binpur-I Block of Jhargram District under Executive Engineer (A-M), Midnapore(A-M) Division under Core-Sector Programme for the Financial Year 2025-2026.,Project ID- WI252641142S000. ( Please see the details in POCUREMENT OF MATERIAL)

Supply of Field Level Material at SRIMANTAPUR DAKSHIN HANDED OVER MAJOR RLI SCHEME AT MOUZA -SRIMANTAPUR, JL NO-10, PLOT NO-1668, GP- SULTANPUR, BLOCK-GHATAL, DISTRICT-PASCHIM MEDINIPUR UNDER GHATAL (A-M) SUB-DIVISION WITHIN MIDNAPORE (A-M) DIVISION, PASCHIM MEDINIPUR UNDER SARASARI MUKHYAMANTRI (CORE SECTOR) PROGRAMME 2025-26. ( Please see the details in FIELD LEVEL MATERIAL)

Energization at Kanaipal new Major RLI Scheme at G.P.-Beltikri, Mouza-Lalgarh and Kanaipal, J.L.No.-790,Plot No.-519/651, Binpur-I Block of Jhargram District under Executive Engineer (A-M), Midnapore(A-M) Division under Core-Sector Programme for the Financial Year 2025-2026.,Project ID- WI252641142S000. ( Please see the details in ENERGIZATION)

Formation of WUA at Kanaipal new Major RLI Scheme at G.P.-Beltikri, Mouza-Lalgarh and Kanaipal, J.L.No.-790,Plot No.-519/651, Binpur-I Block of Jhargram District under Executive Engineer (A-M), Midnapore(A-M) Division under Core-Sector Programme for the Financial Year 2025-2026.,Project ID- WI252641142S000. ( Please see the details in WUA)

Please Enable Macros to View BoQ information

Percentage BoQ

BoQ_Ver4.0

Name of the Bidder/ Bidding Firm / Company :

PRICE SCHEDULE (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only )

NUMBER #

Construction of Pump House at Kanaipal new Major RLI Scheme at G.P.-Beltikri, Mouza-Lalgarh and Kanaipal, J.L.No.-790,Plot No.-519/651, Binpur-I Block of Jhargram District under Executive Engineer (A-M), Midnapore(A-M) Division under Core-Sector Programme for the Financial Year 2025-2026.,Project ID- WI252641142S000.

Earthwork in excavation of foundation trenches or drains in all sorts of soil (including mixed soil but excluding laterite and sand stone), including removing, spreading or stacking the spoils, within a lead of 75 m as directed.The item includes necessary trimming the sides of trenches, levelling,dressing and ramming the bottom, bailing out water as required complete. (a) Depth of excavation not exceeding 1500 mm.

Filling in foundation or plinth by Silver sand in layers not exceeding 150 mm as directed and consolidated the same by through saturation with water ramming complete including the cost of supply of sand. B) Do by Fibe sand

Single brick flat soling of picked Jhama bricks including ramming and dressing bed to proper level and filling joints with local sand.

Ordinary Cement concrete (Mix 1:2:4) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement , if any, in ground floor as per relevant IS codes.(d) with local hard black stone verity chips(churser broken)

Ordinary Cement concrete (Mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement , if any, in ground floor as per relevant IS codes.(d) with local hard black stone verity chips(churser broken)

Hire and labour charges for shuttering with centering and necessary staging upto 4 metre using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams, columns, lintels curved or straight including fitting, fixing and striking out after completion of works (upto roof of ground floor). 25 mm. to 30 mm. thick wooden shuttering as per decision & direction of Engineer-In-Charge.

Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups,binders etc. initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape,placing in proper position and binding with 16 gauge black annealed wire at every inter-section, complete as per drawing and direction. For works in foundation, basement and upto roof of ground floor / upto 4m. (i) Tor steel/Mild Steel SAIL/TATA/RINL i)For foundation Blocks of Water Distribution System

Brick work in cement mortar (1 : 6) with first class kiln burnt bricks including racking out joints, scaffolding and other incidental works etc. complete. a) In foundation & plinth.

b) In superstructure ground floor

125mm thick Brickwork with 1st class in cement mortar (1 : 4) in ground floor.

Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners, as directed and racking out joints or roughening of concrete surface including throating, nosing and drip course ,scaffolding and stagging where neccesary (ground floor)(excluding cost of chipping over the concrete surface) (i) with cement mortar.(1:6) (b) 20mm thick plaster

(c) 15mm thick plaster

(ii) with cement mortar.(1:4) (c) 10 mm thick plaster.(1:4)

25mm. thick damp proof course with cement concrete with stone chips (1:1.5:3) [with graded stone aggregate 10 mm nominal size] and admixture of water proofing compound as per manufacturer's specification followed by two coat of polymer based paint, (1st coat after 4 to 5 days of concrete laying and 2 nd coat just before brick masonry work) as directed (cost of water proofing compound & polymer based paint to be paid separately).( Chequering not required over concrete or painted surface). [Note: - Waterproofing as per item 9, polymer based paint as per item 8 (a) of subhead C of Section (C).

Artificial stone in floor, dado,staircase etc. with cement concrete (1:2:4) with stone chips laid in panels as directed topping made with ordinary or white cement (as neccesary) andmarble dust in proportion (1:2) including smooth finishing and rounding of corner including racking out joint or roughening of concrete surface and application of cement slurrybefore flooring works using cement @ 1.7 kg/ Sqm all complete including all materials and labour in ground floor . . (ii) 25mm thick.

Neat cement punning about 1.5 mm. thick in wall dado, floor, drain, door and window sill etc. Complete. (NB 0.152cum per 100sqm)

M.S. gate of jail type as per approved design made of strong MS frame work inter midiate stifferners and round/square bars of angles MS sheet (not less than 14 gauge) gussets, cleats etc including necessary riveting, bolting, welding, locking and hanging arrangement, fitting, &fixing complete as per direction of Engineer-in-charge in ground floor.

Locking arrangement for Jail type doors including supplying fitting and fixing in position complete as per approved design.

Supplying, fitting and fixing UPVC pipes A- Type and fittings conforming to IS: 13592-1992 with all necessary clamps nails, including making holes in walls, floor etc. cutting trenches in any solil through mesonary concrete structures etc if necessary and mending good damages including joining with joining materials (Spun Yarn, Valamoid/ Bitumin/ M-Seal etc) complete UPVC Pipe , 75 mm Dia. In roof :

B) UPVC Fittings:a) Plain Tee (i) 75 mm. Dia

c) Bend 87.5 degree (i) 75 mm. Dia

Earth work in filling in foundation trenches or plinth with good earth in layer not exceeding 150 mm. Including watering and ramming etc. layer by layer complete with earth obtained from excavation of foundation.

Priming one coat on steel or other metal surface with synthetic enamel / oil bound primer of approved quality including smoothening surfaces by sand papering etc.

Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary. Two coats (super gloss hi- gloss except white)

White washing including cleaning and smoothening surface thoroughly (5 parts of stone lime and 1 part of shell lime should be used in finishing coat) all floor b) Three coats

Applying decorative cement based paint of approved quality after preparing the surface including scraping the same thoroughly (plastered or concrete surface) as per manufacturer's specification. b) Two coats

Supply Fitting fixing of best quality lock & key for door off Godrej make

Suppling 1 mtr x 0.6 m x 24 swg MS board contaning list of spout wise water users by making numbers of spout as directed by EIC. The board should have base colour - Black and words - White to be fitted and fixed on the wall of the pump house.

Total Rs.

Carriage charge onevery item excluding Earth work

Sub-Total Rs.

Add GST @ 18%

Sub-Total Rs.

Labour welfare Cess @1%

Grand Total Rs.

Say Rs

Percentage BoQ

BoQ_Ver4.0

Name of the Bidder/ Bidding Firm / Company :

PRICE SCHEDULE (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only )

NUMBER #

Internal Wiring of Pump House at Kanaipal new Major RLI Scheme at G.P.-Beltikri, Mouza-Lalgarh and Kanaipal, J.L.No.-790,Plot No.-519/651, Binpur-I Block of Jhargram District under Executive Engineer (A-M), Midnapore(A-M) Division under Core-Sector Programme for the Financial Year 2025-2026.,Project ID- WI252641142S000.

Supplying , fitting and fixing of wooden panel board of size 6' X 4' X 1" fitted with 1" X 1.5" wooden frame with 6 nos. of necessary nut & bots for mounting on the wall of pump house.

Supplying and fixing Sheet steel Main Switches on flat iron frame on wall, 15/16 A, 240V DP with fuse on L&N.

Wiring in 1.1 KV grade single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) of following sizes in 25mm PVC casing-capping (Precision make) including necessary PVC clips, fittings etc. c) 2 x 36/0.3 (2.5 sqmm) + 1 x 22/0.3 (1.5 sqmm)

Distribution wiring in 1.1 KV grade 2x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in suitable size PVC casing-capping (Precision make) with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire for ECC, incl. necy. PVC clips, fittings etc. to light/fan/call bell point with piano key type switch (Anchor make) fixed on sheet steel fabricated switch board with Perspex/bakelite top cover on wall incl. necy. connections and making earthing attachment and mending good damages to building works. [PVC casing-capping and Switch board both on surface] b) Average run 6 mtr

Distribution Wiring in 1.1 KV grade 2x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in suitable size PVC casing-capping (Precision make) with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire for ECC, incl. necy. PVC clips, fittings etc. to 5A 3 pin flush type plug socket with piano key type switch (Anchor make) fixed on sheet steel fabricated CRC MS switch board with bakelite/perspex (wall matching color) top cover of 3 mm thick flushed in wall by housing the board after cutting brick wall incl. necy. connection making earthing attachment, painting and mending good damages to building works [PVC casing-capping and plug box both on surface] a) On Board

Supply & Fixing angular batten holder(Anchor) on 75mm dia PVC round block/round bakelite on wall/ceilling.

Supplying & Fixing bulk head light fitting (Havells make) with die cast aluminium housing & frosted glass on wall/ceiling incl. S&F 8 watt CFL lamp complete set.

Fixing only 200A, 415V, TPN sheet steel Main Switch (Rewirable type) on flat iron frame/Angle iron frame on wall.

Fixing only MS sheet metal 200 Amps, 4 bars busbar Chamber on angle iron frame on wall.

Fixing only 63 A, 415V TPN Sheet Steel Main Switch (Rewirwable type)/ Change over on Angle Iron Frame on wall

Fixing only 20 HP Star-Delta starters for 20 HP motor on angle iron frame on wall

Laying of cables upto 3/4 core 25 sqmm on wall/surface incl. S&F MS saddles with earthing attachment in 10 SWG GI(Hot Dip) wire, making etc. as necessary mending good damages and painting. i) 16 sqmm Copper Cable (from meter to 200A main Switch and 200 A main Switch to Busbar Chamber)

ii)10 sqmm Copper Cable (from Starter to motor)

Earthing with 50 mm (2") dia Galvanized iron pipe 3.64 mm thick X 3.04 mtr.(10ft) long and 1X4 SWG G.I.(Hot Dip) Wire (4 mtr. Long ) 13 mm (1/2") dia X80 mm (3") long G.I. Bolts, double nuts and double washer including S&F 15 mm dia G.I. Pipe protection (1 mtr) long to be fitted with bitumen partly under the ground level and partly above the ground level driven to an average depth of 3.56 mtr. (12") below the ground level and restoring the surface duly rammed for Soft/Morrum soil by ISI-Medium G.I. Pipe

Supplying and fixing earth bar of galvanized M.S. Flat 25 mm × 6 mm on wall having clearance of 6 mm. from wall including providing drilled holes (on busbar) about 3 cm. apart complete with G.I. bolts, nuts, washers etc. as required for tapping.

Connecting the equipments to earth busbar including S & F GI (Hot Dip) wire of size as below on wall/floor with staples buried inside wall/floor as required and making connection to equipments with bolts, nuts, washers, cable lugs etc. as required and mending good damages. i) No 10 SWG (Earth Busbar to Every Equipment)

Supply & Fixing EI danger board on wall 20 cm x 30 cm (8"x12") in two distinguishing position in the door of pump house (outside) and at the palce of panel board

Suppling fitting & fixing of shock treatment chart (Bengali) in a wooden frame with brass.

Installation of Diesel Engine Pumping set of any make / brandand for RLI scheme on pump foundation over SAL sleeper (to be supplied departmentally) by fixing nuts and bolts and making connection of suction hose and foot valve with necessary fittings at the inlet end of the water pump and fitting fixing of 90° M S priming bend, sluice valve and delivery hose with all necessary fittings at the delivery end of the water pump, duly connected with the pipe line, maintaining proper alignment and level including cutting holes on the wall of the pump house where necessary, mending good damages after completion of the works as per direction of Engineer-incharge. (Pump set and all accessories will be supplied departmentally).

S&F Crompton greaves premium ceiling fan aura prime antidust husky gold or similar at hall including making connection complete.

Tools Kit comprising Slide wrench set 12" long, Ring Wrench set, Side Spanner set, Screw Driver 1' long, Hammer 500 Gram, Electrical Tester, Combind Pliers, Grease Gun, Funnel 8" etc

Total Rs.

Add GST @ 18%

Sub-Total Rs.

Labour welfare Cess @1%

Grand Total Rs.

Say Rs

Percentage BoQ

BoQ_Ver4.0

Name of the Bidder/ Bidding Firm / Company :

PRICE SCHEDULE (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only )

NUMBER #

Laying of WTA at Kanaipal new Major RLI Scheme at G.P.-Beltikri, Mouza-Lalgarh and Kanaipal, J.L.No.-790,Plot No.-519/651, Binpur-I Block of Jhargram District under Executive Engineer (A-M), Midnapore(A-M) Division under Core-Sector Programme for the Financial Year 2025-2026.,Project ID- WI252641142S000.

Earthwork in excavation of foundation trenches or drains in all sorts of soil (including mixed soil but excluding laterite and sand stone), including removing, spreading or stacking the spoils, within a lead of 75 m as directed.The item includes necessary trimming the sides of trenches, levelling,dressing and ramming the bottom, bailing out water as required complete. (a) Depth of excavation not exceeding 1500 mm.

Earthwork in excavation of field trenches as per designed section & alignment for laying of pipe lines(PVC,RCC,ACP etc.) upto a depth of 1500 mm in all sorts of soil including removing, spreading or stacking extra earth as directed.The item includes necessary trimming the sides of trenches, levelling,dressing and ramming the bottom as required complete.

Laying of P.V.C. pipes of different diameters within field trenches in curve / straight line using P.V.C. fittings, viz. Bend, Tee, Reducer etc. and making leak proof joints with couplers after roughening the surface with wire brush and emery paper and applying solvent cement (The rate is inclusive of transport of pipes, fittings and solvent cement to be supplied by Deptt.) all complete as per direction of Engineer-in-Charge. a) 315 mm dia PVC Pipe

b) 200 mm dia PVC Pipe

c) 140 mm dia PVC Pipe

Earth work in filling in trenches after laying pipe lines (PVC,RCC,ACP etc.) with good earth obtained from excavation of field trences in layer not exceeding 225 mm , including watering & ramming etc. layer by layer complete. (payment will be made on the basis of measurement of finished quantity of work)

Filling in foundation or plinth by silver sand in layers not exceeding 150 mm as directed and consolidating the same by thorough saturation with water, ramming complete including the cost of supply of sand. (payment to be made on measurement of finished quantity) (B) Do - by fine sand

Single brick flat soling of picked Jhama bricks including ramming and dressing bed to proper level and filling joints with local sand.

Ordinary Cement concrete (Mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement , if any, in ground floor as per relevant IS codes.(a) Pakur vareity .

Ordinary Cement concrete (Mix 1:2:4) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement , if any, in ground floor as per relevant IS codes.(a) Pakur vareity

Hire and labour charges for shuttering with centering and necessary staging upto 4 metre using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams, columns, lintels curved or straight including fitting, fixing and striking out after completion of works (upto roof of ground floor). 25 mm. to 30 mm. thick wooden shuttering as per decision & direction of Engineer-In-Charge.

Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction. (a) For works in foundation and upto roof of ground floor/upto 4 m (i) Tor steel/Mild Steel III. Other Manufacturers not specified

Brick work with Ist class brick in cement mortar (1 : 6) . (a) In foundation and plinth.

Brick work with Ist class brick in cement mortar (1 : 6) . (a) In superstructure ground floor.

125 mm. thick brick work with 1st class bricks in cement mortar (1:4) in ground floor.

Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface] (i) With 1:6 cement mortar (c) 15 mm thick plaster

Neat cement punning about 1.5mm thick in wall, dado, window sill, floor etc. NOTE:Cement 0.152 cu.m per 100 sq.m.

Erection, fitting, fixing of set of M S Quadruped inlet and outlet pipe fittings for 1st chamber and 2nd chamber of Major RLI Scheme. (Rate inclusive of transportation from departmental store to work site).

Installation /Erection of Surge tank / Shore manifold base( to be supplied from Deppt. Free of cost ) over a rigid base of concrete (1:2:4) with stone chips 20mm down 1250mmx1250mmx150mm over a single layer of brick flate solling and embendedthe leg of surge tank / shore manifold base including cost of all material and laboure and as per direction EIC.

Labour Charges for fitting, fixing and laying, where necessary of following M.S / G.I. / E.R.w. pipes and accessories including transportation of the same cutting, threading, jointing and making leak-proof threaded / flanged joint at site, by using socket / rubber insertion, nuts and bolts etc. maintaining proper alignment and level - all complete - as per direction of Engineer-in-Charge. a) 150 mm dia ERW Pipe (Deparmental Issue)

b) 150mm. dia. C.I. Sluice Valve

Placing and positioning the Centrifugal pump motor set on the pump base / pump house floor, aligning properly with necessary packing and fixing the set with holding down nuts and washer including cutting holes of requisite size in the floor / base, grouting the bolts and mending good all damages complete as per direction of the Engineer-in-Charge. (ii) 20 H.P. Capacity

Labour charges for fitting, fixing150 mm. Dia. Alfa-Alfa valve with 160mm. dia. P.V.C. riser pipe with the help of flanged P.V.C. tail-piece by joining the P.V.C. End of Tail-piece and riser pipe with coupler and flanged end of Tail-piece and Alfa-Alfa valve with rubber insertion, nuts and bolts etc. complete.

Supplying, fitting and fixing including transportation of sign board for identifying the exact location of MINI RLI scheme (one at road side and other at site) the board will be made 3 mm thick MS plate of size 300 mm x 600 mm and fitted and fixed on 50 mm GI Pipe of IS 1239/90 (part-1) including cutting, welding and writting of both sides of Sign board. Base -Yellow, and words - Red. Both bottom end of the stands pipe will be grouted in 1:2:4 CC on a single brick flat soling. This will include one materials and labour complete as per drawing and direction of E.I.C.

Testing of pipe line system against leakages by filling the distribution chamber with water and supplying water through the entirepipe line net work for at least 4 (four) hour by running the departmental Diesel Engine pumping set, including supplying necessary fuels & lubricants and hiring and transporting tools and plants all complete as per direction of Engineer-inCharge. (i) For Major R.L.I.

Total Rs.

Add @ 4% Carriage excluding Earth works

Sub-Total Rs.

Add GST @ 18%

Sub-Total Rs.

Labour welfare Cess @1%

Grand Total Rs.

Say Rs

Percentage BoQ

BoQ_Ver4.0

Name of the Bidder/ Bidding Firm / Company :

PRICE SCHEDULE (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only )

NUMBER #

Procurement of Material at Kanaipal new Major RLI Scheme at G.P.-Beltikri, Mouza-Lalgarh and Kanaipal, J.L.No.-790,Plot No.-519/651, Binpur-I Block of Jhargram District under Executive Engineer (A-M), Midnapore(A-M) Division under Core-Sector Programme for the Financial Year 2025-2026.,Project ID- WI252641142S000.

UPVC and P.V.C. PIPES & ACCESSORIES 315 mm dia P.V.C pipe class-I ( with a loose matching coupler) marking IS No. 4985/1988 with latest amendments with free solvent cement.

200 mm. dia P.V.C. pipe Class- I ( with a loose matching coupler) marking IS No. 4985/ 1988 with latest amendments with free solvent cement.

140 mm. dia P.V.C. pipe Class- I ( with matching coupler ) marking IS No. 4985/1988 with latest amendments with free solvent cement.

140 mm. dia P.V.C. pipe Class-II ( with a loose matching coupler) marking IS No. 4985/ 1988 with latest amendments with free solvent cement.

200X200X200 mm dia P.V.C. Equal Tee with free solvent cement.

140X140X140 mm dia P.V.C. Equal Tee with free solvent cement.

315 mm. dia (IS.No. 10124/88 Part- 8 with latest amendment) F.T.P.

200 mm.. dia ( IS. No. 10124/ 88 Part- 6 with latest amendment) F.T.P.

160 mm. dia ( IS. No 10124/88 Part- 6 with latest amendment) F.T.P..

200 X 140 mm dia.P.V.C. Reducer (Class-II) with free solvent cement.

160 X 140 mm dia.P.V.C. Reducer (Class-II) with free solvent cement.

200 mm. dia 600 ( IS. No. 10124/88 Part- 8 with latest amendment ) bend

140 mm. dia 900 (IS. No. 10124/ 88 Part- 8 with latest amendment) bend

140 mm. dia 600 ( IS No. 10124/ 88 Part- 8 with latest amendment ) bend

200 mm. dia IS. NO. 10124/ 88 Part- 4 with latest amendment End cap.

140 mm. dia IS. NO. 10124/ 88 Part- 4 with latest amendment End cap.

Extra Coupler for 315 mm. dia P.V.C. pipe (extra) IS. 10124/1988 with latest amendments with free solvent cement.

Extra Coupler for 200 mm. dia P.V.C. pipe ( extra) I.S. 10124/1988, Part- II with free solvent cement.

Extra Coupler for 140- mm. dia P.V.C. pipe (extra) I.S 10124/ 1988, Part- II with free solvent cement.

150 mm dia ISI marked P.V.C.Flexible Hose pipe as per IS 15265

Extra Solvent cement heavy bodied I.S. 14182-1994 with latest amendments

MS ITEMS & ACCESSORIES GI Quardropped set and inlet outlet pipe Fittings, with good quality painting(2 nos chamber for 1 set)as per annexture drawing-I for Major RLI

Sluice valve ISI marked Ø 150 mm P.N 1.6 with hand wheel for water works purpose, C.I flanged type ISI marked IS 14846/2000 with latest amendments. Valves shall be tested for (closed end test) hydrostatic test requirement.

MS Shore manifold with painting made of 350 mm dia MS ERW pipe 1.5 mtrs long having 2 numbers of 150 mm dia inlet and 1 nos of 300 mm dia outlet all end flanged welded MS ERW pipe conferming to IS 1239 (Part-l) / 3589 Medium and MS Flanged IS 6392/719table-17)

300 mm dia MS Bend 90° one end flange and other end free IS 6392 Table 5

300 mm dia MS Bend 90° both flange IS 6392 Table 5

C.I Alfa Alfa valve 150 mm dia C-type ( G.I Cover Plate with Boss and 8 Nos Nut & Bolt.)

80 mm dia NB GI surge pipe 3 meter length one end flange welded

ELECTROMOTOR PUMP & ELECTRICAL ACCESSORIES 20 H.P Electro Motor Pump set having capacity of 200 cubic meter per hour discharge at 18 meter total head. The Motor shall be designed for operation at 415 V (±10%), 3 Phase, 50 Cycles per Sec (±5%), A.C Supply 1500 r.p.m. The Motor shall be TEFC ISI marked IS 12615 with latest amendments thereof. The Pump ( size 150 x150 mm.) shall be horizontal, single stage, split casing, IS Marked IS-6595/1993 with latest amendments hereof. Pump should be directly coupled with Motor and mounted on a common fabricated M.S Base frame. 20 H.P. ,200 m³/hr,18 m head.

Supply of 20 HP 3Ø Electromegnetic Star-Delta motor Controllers with 4 pole heavy duty power contractor, single phasing preventer and normal protective features,MCB,Indicators,push buttons, Ammeter & Voltmeter,all in IP54 enclosure of min 16 swg, C.R. Sheet, 10 tank process powder coat painted and as per techical specification.

Supply of 200Amp four pole Busbar chamber with Copper bars of 30 cmX2.5cmX0.6cm provided with requisite bolts (with insulated cap), nuts, washers in CRCA sheet metal enclosure of thickness 17 swg (1.22mm) having dimension of 36cmX29cmX15cm with rating & WRDD letter embossed on cover, with continuous welded smoothly chamfered edged, dust and vermin proof, stove enameled/ powder coat painted and with raised mounting arrangement.

Sheet metal enclosed rewireable type Fuse, Main Switch, 415 V 3 v Phase , 50 cycles A.C. supply conforming to IS 60947 (Part-3) /1993 for 200 Amp TPN.

Supply of PVC sheathed multi core cavble with electrolytic grade annealed copper conductor suitable upto 1100 V conforming to IS 694, 3 Core 10 Sq mm Armoured PVC Cable

3C X 16 sqmm copper cable conforming to IS 694 [Busbar to 63 A, TP Main switch and 63 A TP switch to Motor starter

Sheet metal enclosed rewireable type Fuse, Main Switch, 415 V 3 v Phase , 50 cycles A.C. supply conforming to IS 60947 (Part-3) /1993 for 63 Amp TPN.

Total Rs.

Labour welfare Cess @1%

Total Rs.

Say Rs

Percentage BoQ

BoQ_Ver4.0

Name of the Bidder/ Bidding Firm / Company :

PRICE SCHEDULE (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only )

NUMBER #

Supply of Field Level Material at Kanaipal new Major RLI Scheme at G.P.-Beltikri, Mouza-Lalgarh and Kanaipal, J.L.No.-790,Plot No.-519/651, Binpur-I Block of Jhargram District under Executive Engineer (A-M), Midnapore(A-M) Division under Core-Sector Programme for the Financial Year 2025-2026.,Project ID- WI252641142S000.

M.S. Hose Clamp 150 mm dia heavy duty (As per sample)

Foot Valve 150 mm.dia commercial (Flanged type) confirming IS:4038/1986 with latest ammendment

Foot valve Lather washer 150mm.dia (asper sample)

150 mm NB G.I. 90 degree long priming bend one flange welded and other end ring welded with free baking flange. (As per sample) - ( IS : 1239 )

150 mm NB G.I. - ( IS : 1239 ) 90 degree bend both end flange. (As per sample) - ( IS : 1239 )

M.S Reducer 200X150 mm both end flanged

Nuts & Bolts M 20x80 mm.

C.I. Flanged Tail piece/Nipple 150 mm dia. (As per sample)

150 mm NB CI Combined nipple both end grooved (As per sample)

Foundation Bolt For Distribution Chamber (As per sample)

For Motor Pump Sets (As per sample)

Compresed Asbestos fibre jointing for Quadruped & Tripod set( for raised surface of Flange as per IS-6392) 500 mm.dia (Table-5)

Rubber Insertion (for raised surface of Flange as per IS-6392) 300 mm dia( Table-11) (As per sample)

300 mm dia( Table-5) (as per sample)

200mm.dia( Table-11) (as per sample)

200 mm. dia (Table-5) (as per sample)

150 mm.dia (Table -17) (as per sample)

150mm.dia (Table -5) (as per sample)

80 mm.dia (Table-17) (as per sample)

Total Rs.

Labour welfare Cess @1%

Total Rs.

Say Rs

Percentage BoQ

BoQ_Ver4.0

Name of the Bidder/ Bidding Firm / Company :

PRICE SCHEDULE (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only )

NUMBER #

Energization at Kanaipal new Major RLI Scheme at G.P.-Beltikri, Mouza-Lalgarh and Kanaipal, J.L.No.-790,Plot No.-519/651, Binpur-I Block of Jhargram District under Executive Engineer (A-M), Midnapore(A-M) Division under Core-Sector Programme for the Financial Year 2025-2026.,Project ID- WI252641142S000.

PART-A

PCC POLE 9M

PCC POLE 8M

ISL 11KV 200A TPGO

Turn Buckle 18 x 5/8"

DTR63KVA 11/0.433KV, 3PH O/D

LA12KV(5KA)FOR11KV

COND ACSR RBT50SMM

COND ACSR SCQR 20SMM

G.I. WIRE 5MM.

G I EARTH SPIKE 1833X20MM

GI STAY SET HT(1830X20MM)WRKG LD-7900KG

Porcelain guy insulator HT

G I STAY WIRE 7/3.15MM

M.S. CHANNEL 100 X 50MM

M.S. CHANNEL 75 X 40MM

M.S ANGLE 65 X 65 X 6MM.

M.S. FLAT 65 X 6MM

1.1KVPVC4X50SMM AL CABLE

11KV PIN INS-5KN Polymer

11 KV DISC INS 45KN

COMPOSITE H/W FITTGS. FOR 30/50SMM COND

11 KV V Bracket

11 KV Top Adopter

LT AB Cable 3CX70+1CX50+1CX16 Sqmm.

Anchor/ Dead End Clamp

Eye Hook

Suspension Clamp

Distribution Box for LT AB Cable

Piercing Connector

D iron clamp 3" x 3.5"

Porcelain Shackle insulator 3" x 31/2"

Total

Sundry @ 5% of Materials

Escallation on material value @ 5% (2024-25)

Sub Total

Escallation on material value @ 5% (2025-26)

Total Amount Material Cost (PART-A)

PART-B

11 KV Line Survey for HTOH line

Fixing of LA

Fixing of TPGO Isolator

Erection of Transformer 63KVA

Stringing and Sagging50 sqmm ACSR 3W

Stringing and Sagging20 sqmm ACSR 2W

Earthing Completed

Erection of HT Stay set

Fixing of Pin Insulator 11 KV

Fixing of Disc. Insulator

Erection of S/Stn DP with all fittins 9mt pcc Pole

Erection of DP with all fittings 9mt pcc Pole

Erection OF 8 mt pcc Pole with out fittings

Extn.of Single Pole 9Mtr PCC Pole

Fixing of C.G Bracket on SP

Fixing of C.G Bracket on DP

Cross Lacing

Fixing of T-off Bracket on SP

Nutral Earthing

Condusting GIS Survey for Over Head Electification

Painting of DTR Code on sub-Station Structure

L&MV Survey for LTOH line

SC Work3 ph

Earthing Completed

Erection OF 8 mt pcc Pole with out fittings

Fixing Anchor/ Dead End Clamp

Fixing Suspension Clamp 35 Sqmm

Fixing Distribution Box for LT AB Cable

Fixing Piercing Connector

Strigg. & Sagg. LT AB Cable 3CX70+1CX50+1C16 Sqmm.

Fixing of Shakle Insulator

Condusting GIS Survey for Over Head Electification

Sub-Total Rs.

Add GST @ 18%

Sub-Total Rs.

Labour welfare Cess(material + Labour) @1%

Total Amount of Labour Cost (PART-B)

Total Amount Material Cost (PART-A)

Total Amount {Material Cost (PART-A) + Labour Cost (PART-B)}

Total payable Supervision Charges [Memo No. 2005601398/Quot/03 of WBSEDCL]

Security Deposit [Memo No. 2005601398/Quot/03 of WBSEDCL]

Grand Total Rs.

Say Rs

Percentage BoQ

BoQ_Ver4.0

Name of the Bidder/ Bidding Firm / Company :

PRICE SCHEDULE (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only )

NUMBER #

Formation of WUA at Kanaipal new Major RLI Scheme at G.P.-Beltikri, Mouza-Lalgarh and Kanaipal, J.L.No.-790,Plot No.-519/651, Binpur-I Block of Jhargram District under Executive Engineer (A-M), Midnapore(A-M) Division under Core-Sector Programme for the Financial Year 2025-2026.,Project ID- WI252641142S000.

Campaigning in the command area of New Major RLI Sub-project by community workers for mass awareness , capacity building to achieve sustainability of Sub-projects. Cost include wage payment to community workers, transportaton, leaflet etc.

Meeting Cost for WUA formation, cost including Refreshment, training materials, transport local conveyance, wage payment to community worker, remuneration to resource person and incidental charges

Registration Cost for WUA under suitable act ( Society ) deed writing including registration charge, conveyance cost & opening of Bank A/C etc.

Livelyhood plan / Micro plan formulation cost for minor irrigation scheme, cost including refreshment, training materials, transport local conveyance, wage payment to community worker, remuneration to resource person and incidental charge ( rate on meeting )

Meeting and onsite demonstration for operation & maintenance of one New Major RLI , water manangement and mode of collection of water tax, building of corpus fund etc

IEC Materials ( Leaflet, poster, notebook )= 8 meetings, for SL - 2 and SL - 4 ’

Documentation Cost for activities of WUA Scheme by still photography, report booklet etc in both hard and soft copy.

Impact study & monitoring of scheme by site visit of 2 Community workers during 3 years' period

Total Amount

Say Rs