Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L2₹13.7 LAccepted-AOC 58 13 NORACHIVALASU PALLIPATTY POST METTUR TALUK SALEM 636 458 | SALEM | SALEM | TAMIL NADU | 636458 | ₹13.7 L Quoted ₹13.0 L | L2 | Accepted-AOC L1 |
| 2 | L1₹11.6 LRejected-AOC | ₹11.6 L | L1 | Rejected-AOC L2 |
| 3 | Rejected-Technical 6 31 B THOOKANAMPATTY METTUR DAM 636401 | METTUR DAM | SALEM | TAMIL NADU | 636401 | - | - | Rejected-Technical BQR Conditions not Satisfied |
| Sl No | Description | Qty | Unit | A.Kalidasan L1 | PRANEET AND CO L2 |
|---|---|---|---|---|---|
| 1.00 | Dismantling the damaged brick parapet wall including cost of all materials, leads, lifts labour charges and dispose debris away from site etc., complete as per the direction of site Engineer incharge | 14 | m3 | 360 ₹5,040 | 100 ₹1,400 |
| 2.00 | Dismantling the damaged pressed tiles and weathering course without damage to the roof slab including cost of all materials, leads, lifts labour charges and dispose debris away from site etc., complete as per | 177 | m2 | 51 ₹9,027 | 400 ₹70,800 |
| 3.00 | Chipping the RCC roof top and roughening the surface without damage to roof slab including cost of all materials, lead, lift labour charges and dispose debris away from site etc., complete as per the direction of site incharge | 153 | m2 | 42 ₹6,426 | 400 ₹61,200 |
| 4.00 | Brick work in CM 1:5 using IInd class chamber burnt bricks (230x110x70mm), OPC 53 grade cement (DALMIA / ULTRATECH / RAMCO or equivalent brand), M sand approved quarry for basement and super structure including cost of all materials, scaffolding, labour charges, curing, lead, lift, T&P, etc., complete as directed by the Engineer in charge. | 5 | m3 | 7,000 ₹35,000 | 6,000 ₹30,000 |
| 5.00 | Plastering in CM 1:5, 12mm thick using OPC 53 grade cement (DALMIA/ ULTRATECH/RAMCO or equivalent brand), P sand approved quarry for all ceiling surfaces, Sunshades, Lofts, etc., including cost of all materials, scaffolding charges, labour charges, curing, lead, lift, T&P etc., complete as directed by the Engineer in charge. | 100 | m2 | 300 ₹30,000 | 180 ₹18,000 |
| 6.00 | Providing P.C.C.1:1.5:3 using OPC 53 grade cement (DALMIA / ULTRATECH / RAMCO or equivalent brand), M sand, 6mm to 10mm HBG metal (Approved quarry) including cost of form work, centering and shuttering, cost of all materials, labour charges, vibrating the concrete, curing, all T&P, lead, lift etc., complete as directed by the Engineer in charge. | 25 | m3 | 8,000 ₹2 L | 7,300 ₹1.8 L |
| 7.00 | Plastering in CM 1:3, 12mm thick using OPC 53 grade cement (DALMIA/ ULTRATECH/RAMCO or equivalent brand),P sand approved quarry for all ceiling surfaces, Sunshades, Lofts, etc., including cost of all materials, scaffolding charges, labour charges, curing, lead, lift, T&P etc., complete as directed by the Engineer incharge. | 68 | m2 | 300 ₹20,400 | 180 ₹12,240 |
| 8.00 | Manufacturing supplying and fixing of Fully Panelled single leaf steel door with the following specification MS angels of size 40x40x6mm are used for the outer frames and M.S. angles of size 35x35x5mm for the shutter frames, stiffeners with 32 x 6mm M.S flat is provided at required intervals in the shutter frame. 18-gauge C.R. sheet laid as panel in the shutter and welded intact. M.S. flat 18x5mm is welded over the 32 x 6mm M.S. flat sandwitching the C.R. sheet in between additional stiffeners with 18x5mm M.S. flat is provided diagonally at the rear side of the shutter. 3nos. of Steel Parliament Hinges of Size 125mm x 150mm to be provided. 6nos. of holdfasts 200 mm in length made of angle section spliced at the ends are welded to the outer frames of the door. Tower bolts 3 nos, one at the top, one at lock rail(Inner) and the other at the bottom are provided 1no. Aldrop is provided at lock rail section in the door 2 Nos of 200mm handle are to be provided. One rotating locking arrangements for the inner side of the door and additional provision for locking arrangements for lock is provided on the rear side of the door at an appropriate place. A tie bar is provided at the bottom of the frame to prevent twisting of frame during transportation and fixing. All members are given painting two coats ready mixed enamel paint with One coat of primer approved quality and colour. The rate includes cost of all materials, labour charges, transportation to site of work, loading, un loading and all other incidental charges etc., complete complying with standard specification and as directed by the Engineer incharge | 9 | m2 | 5,500 ₹49,500 | 2,000 ₹18,000 |
| 9.00 | Providing and fixing casement doors fabricated from un-plasticized polyvinyl chloride (UPVC) sections. Profiles: The profiles should be three chamber system which provides high insulation properties with outer frame 60mm x 55mm with an outer wall thickness of 2.4mm. The window unit should be designed with all corner joints mitred and fusion welded. Windows should be steel reinforced all-round with 25x 24 x 25mm steel reinforcement with a thickness of 1mm to have dimensional stability. The sash should be of 60 x102mm. The mullion should be of 60 x 74mm. The profiles should have co-extruded seals. Hardware: All the hardware like friction stays, handles should be screwed with self tapping screws. The handles, locks should be designed so that they cannot be released from outside. Glazing: The window system should be glazed with 5mm plain float glass / 6mm bison lam Installation: The profiles should be cut to length and welded 45 degrees. The window should be designed such that the water drainage does not pass through the reinforcement chamber. The window system should be fixed directly to the plastered brick wall using self expanding nylon plug and driving ms electroplated screws into plug. The Door should be got approved from the Executive Engineer before use on work including all cost of materials, hydraulic closer, lead, lift, transport and etc., complete as directed by the Engineer in charge. | 7 | m2 | 7,700 ₹53,900 | 2,000 ₹14,000 |
| 10.00 | White washing two coats with freshly burnt white shell lime for ceilings including cost of lime, fevicol typ gum, brushes, scaffolding charges, scrapping the old surface, leads, lifts charges labour charges etc complete. | 271 | m2 | 42 ₹11,382 | 50 ₹13,550 |
Tender Value
₹16.1 L
EMD Value
₹14,000
Closing Date
4 Feb 2026, 12:00 pmClosed
SE/GEDC/GOBI
Office of the Superintending Engineer Gobi Electricity Distribution Circle, Gobi 110/11 KVSS Premises, Vettaikarankoil, Nagadevampalayam (Po), Gobichettipalayam-638 476
Improvement works arresting roof leakage and allied works for Thalavady Sub division office, East Thalavady Section office and South Thalavady Section office building at Thalavady 110 KVSS premises
2026_EB_644656_1
ET No 07 Dt 12.01.2026
Open Tender
Civil Works - Buildings
180 days
SE/GEDC/GOBI
Please refer Tender documents.
2 documents required · 2 mandatory
₹0
₹14,000
24 Mar 2026
19 Jan 2026
5 Feb 2026
19 Jan 2026
4 Feb 2026
19 Jan 2026
Dismantling the damaged brick parapet wall including cost of all materials, leads, lifts labour charges and dispose debris away from site etc., complete as per the direction of site Engineer incharge
Dismantling the damaged pressed tiles and weathering course without damage to the roof slab including cost of all materials, leads, lifts labour charges and dispose debris away from site etc., complete as per
Chipping the RCC roof top and roughening the surface without damage to roof slab including cost of all materials, lead, lift labour charges and dispose debris away from site etc., complete as per the direction of site incharge
Brick work in CM 1:5 using IInd class chamber burnt bricks (230x110x70mm), OPC 53 grade cement (DALMIA / ULTRATECH / RAMCO or equivalent brand), M sand approved quarry for basement and super structure including cost of all materials, scaffolding, labour charges, curing, lead, lift, T&P, etc., complete as directed by the Engineer in charge.
Plastering in CM 1:5, 12mm thick using OPC 53 grade cement (DALMIA/ ULTRATECH/RAMCO or equivalent brand), P sand approved quarry for all ceiling surfaces, Sunshades, Lofts, etc., including cost of all materials, scaffolding charges, labour charges, curing, lead, lift, T&P etc., complete as directed by the Engineer in charge.
Providing P.C.C.1:1.5:3 using OPC 53 grade cement (DALMIA / ULTRATECH / RAMCO or equivalent brand), M sand, 6mm to 10mm HBG metal (Approved quarry) including cost of form work, centering and shuttering, cost of all materials, labour charges, vibrating the concrete, curing, all T&P, lead, lift etc., complete as directed by the Engineer in charge.
Plastering in CM 1:3, 12mm thick using OPC 53 grade cement (DALMIA/ ULTRATECH/RAMCO or equivalent brand),P sand approved quarry for all ceiling surfaces, Sunshades, Lofts, etc., including cost of all materials, scaffolding charges, labour charges, curing, lead, lift, T&P etc., complete as directed by the Engineer incharge.
Manufacturing supplying and fixing of Fully Panelled single leaf steel door with the following specification MS angels of size 40x40x6mm are used for the outer frames and M.S. angles of size 35x35x5mm for the shutter frames, stiffeners with 32 x 6mm M.S flat is provided at required intervals in the shutter frame. 18-gauge C.R. sheet laid as panel in the shutter and welded intact. M.S. flat 18x5mm is welded over the 32 x 6mm M.S. flat sandwitching the C.R. sheet in between additional stiffeners with 18x5mm M.S. flat is provided diagonally at the rear side of the shutter. 3nos. of Steel Parliament Hinges of Size 125mm x 150mm to be provided. 6nos. of holdfasts 200 mm in length made of angle section spliced at the ends are welded to the outer frames of the door. Tower bolts 3 nos, one at the top, one at lock rail(Inner) and the other at the bottom are provided 1no. Aldrop is provided at lock rail section in the door 2 Nos of 200mm handle are to be provided. One rotating locking arrangements for the inner side of the door and additional provision for locking arrangements for lock is provided on the rear side of the door at an appropriate place. A tie bar is provided at the bottom of the frame to prevent twisting of frame during transportation and fixing. All members are given painting two coats ready mixed enamel paint with One coat of primer approved quality and colour. The rate includes cost of all materials, labour charges, transportation to site of work, loading, un loading and all other incidental charges etc., complete complying with standard specification and as directed by the Engineer incharge
Providing and fixing casement doors fabricated from un-plasticized polyvinyl chloride (UPVC) sections. Profiles: The profiles should be three chamber system which provides high insulation properties with outer frame 60mm x 55mm with an outer wall thickness of 2.4mm. The window unit should be designed with all corner joints mitred and fusion welded. Windows should be steel reinforced all-round with 25x 24 x 25mm steel reinforcement with a thickness of 1mm to have dimensional stability. The sash should be of 60 x102mm. The mullion should be of 60 x 74mm. The profiles should have co-extruded seals. Hardware: All the hardware like friction stays, handles should be screwed with self tapping screws. The handles, locks should be designed so that they cannot be released from outside. Glazing: The window system should be glazed with 5mm plain float glass / 6mm bison lam Installation: The profiles should be cut to length and welded 45 degrees. The window should be designed such that the water drainage does not pass through the reinforcement chamber. The window system should be fixed directly to the plastered brick wall using self expanding nylon plug and driving ms electroplated screws into plug. The Door should be got approved from the Executive Engineer before use on work including all cost of materials, hydraulic closer, lead, lift, transport and etc., complete as directed by the Engineer in charge.
White washing two coats with freshly burnt white shell lime for ceilings including cost of lime, fevicol typ gum, brushes, scaffolding charges, scrapping the old surface, leads, lifts charges labour charges etc complete.
Colour washing with two coats using ready mixed Weather Proof Emulsion (First quality- Asian paint ultima/Dulux weather shield/Nippon water bond) of approved quality over a coat of exterior emulsion water based primer in surfaces ,including clean removal of dirt, cost of all materials, scaffolding, labour, lead, lift etc., complete as directed by the Engineer in charge.
Painting two coats of damp proof paint over one coat of primer of first class quality Asian paint ultima/Dulux weather shield/Nippon water bond or Equivalent ) over roof top including cost of all materials, scrapping the old surface, labour lead, lift, scaffolding etc., complete.
Supplying and fixing of structural Steel for ladder including cost of all materials, fabrication charges, painting with two coats of enamel paint over one coat of primer, labour charges, lead, lift and making good of damaged portion etc complete
Supplying and Providing PVC 4 layer tank (SINTEX / ASHIRVAD / SUPREME) 1000 Lit capacity of approved quality and make including necessary inlet, outlet, over flow and drain line fixing accessories / fitting, cost of all materials, labour charges for fixing, lead, lift etc., complete as directed by the Engineer in charge.
Supplying and fixing in position of 110mm dia (4kg/cm²) PVC down fall pipe of (FINOLEX/ASTRAL/SUPREME) approved make and quality with ISI monogram as directed by the Engineer in charge for sewer pipes including cost of all materials, all specials such as tees, elbow, shoes, Special clamps, bends and screws, gratings, wooden plugs etc., making holes in masonry/concrete, restoring the disturbed area to original condition, making water tight jointing with no leakage, labour, scaffolding, lead, lift, etc., complete.
Supplying and fixing in position of 25mm dia (10kg/cm²-Shell thickness 2 to 3mm) PVC sewer pipe for water supply line of (FINOLEX/ASTRAL/SUPREME) approved make and quality with ISI monogram as directed by the Engineer in charge for sewer pipes including cost of all materials, all specials such as tees, elbow, shoes, Special clamps, bends and screws, gratings, wooden plugs etc., making holes in masonry/concrete, restoring the disturbed area to original condition, making water tight jointing with no leakage, labour, scaffolding, lead, lift, etc., complete.
Supplying and fixing in position of 40mm dia (10kg/cm²-Shell thickness 2 to 3mm) PVC sewer pipe for water supply line of (FINOLEX/ASTRAL/SUPREME) approved make and quality with ISI monogram as directed by the Engineer in charge for sewer pipes including cost of all materials, all specials such as tees, elbow, shoes, Special clamps, bends and screws, gratings, wooden plugs etc., making holes in masonry/concrete, restoring the disturbed area to original condition, making water tight jointing with no leakage, labour, scaffolding, lead, lift, etc., complete.
Supplying and fixing 25mm dia Heavy Gate valve (LEADER/ZOLOTO) of approved quality including cost of all materials, labour charges for fixing, lead, lift etc., complete as directed by the Engineer in charge.
Supplying and fixing 40mm dia Heavy Gate valve (LEADER/ZOLOTO) of approved quality including cost of all materials, labour charges for fixing, lead, lift etc., complete as directed by the Engineer in charge.
Supplying and fixing of 15mm dia CP coated bib cock of long bady / short bady (Heavy Duty) (Parryware / Plato or its equivalent) as directed by the Engineer in charge including cost of all materials, labour charges for fixing, lead, lift, etc., complete.
Supplying and fixing coloured Indian water closet Thrift Pan 580mmX440mm of Parry Ware make or Equivalent of approved quality and colour with ‘P’ or ‘S’ trap conforming to IS 2556-Part XII with 10 lit capacity PVC Cistern tank and 12mm dia Angle Valve water closet is connected with 32mm dia PVC 6Kg/cm² pipe of required length, packing the joints of the closet with the traps with asbestos rope using cement mixed with approved water proof compound, laying the closet over sand cushion and forming flooring around the closet using 40mm broken jelly in lime concrete 1:2:5 (One part of Lime, two part of sand and five part of brick jelly) of 100mm thick and finishing the top to required slope, connecting to soil pipes by dismantling the brick masonry/RCC slab making good the disturbed portion to original condition and finished water tight without leakage complying with standard specification as directed by the Engineer in charge including cost of all materials, Transporting, all labour, lead, lift, T&P etc., complete
Supplying and fixing in position White Glazed Model Floor Mounted European Water Closet of size 460x380mm of best quality and approved make with 100mm "P" or "S" trap connecting with CI pipe of 100mm dia / PVC pipe of 110mm dia, double flipped rigid PVC black seat and seat cover with CP brass hinges including cost of white cement, cement for packing, spun yarn, teak wood plugs, brass screws, etc., including supplying and fixing 10 litres capacity PVC / 12.5 litres capacity porcelin low level flushing tank with a pair of CI brackets, etc., complete with all fittings, such as, 15mm brass ball valve with polythene float with brass handle, union coupling connected by means of 40mm white PVC flush hand using Indian adopter joint including all internal fittings, such as 15mmbras connections, 15mm nylon connection, TW plugs, screws and also giving necessary connection to the PVC pipe and painting the CI brackets with 2 coats of approved paint over one coat of red oxide primer, dismantling the masonry and re- doing the dismantled masonry to original condition. Floor Fitting including cost of all materials, labour charges, lead, lift, curing etc., complete complying with standard specifications.
Supplying and fixing approved make Coloured wash basin of size 550mm x 400mm with all accessories such as cast Iron Brackets, 32mm dia CP Waste coupling, 32mm dia Waste pipe, 15mm dia valve, 15mm dia Nylon connection, 15mm dia Brass nipples, 15mm CP piller tap etc., including cost of all materials, transporting, labour, lead, lift, etc., complete.
Wiring with 2 x 1.5 sqmm (36/0.3) PVC insulated SC unsheathed copper conductor cable of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling for lights, fan and buzzers with PVC accessories in wall with GI switch box and 6A modular switches with continuous earth wire of 2.5 Sq.mm copper wire for PVC light point / Fan point with 5amps switch, ceiling rose, cable, pipe, etc., The wiring should be Finolex or its equivalent make and Switch box/Switches should be Legrand/MK/equivalent with ISI mark including cost of all materials such as cables, pipes, etc., complete as directed by the Engineer in charge. For light and Fan points .
Wiring with 2 x 1.5 sqmm (22/0.3) PVC insulated SC unsheathed FRLS copper conductor of cable 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories in flush with wall GI switch box with 5A 3 pin modular type non interlocking CS plug with continuous earthing for providing 2.5 Sq.mm multi strand PVC wire for making good of concealed portion with suitable color for concealed PVC plug point cable, pipe, etc., The wiring should be Finolex or its equivalent make and switch box should be Legrand/MK/Schneider make with ISI mark including cost of all materials such as cables, pipes, etc., complete as directed by the Engineer in charge.
Wiring with 2x4 sqmm PVC insulated SC unsheathed FRLS Copper Conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with 150mm x 100mm x 113mm GI switch box in flush with wall with 3 mm thick Hylem sheet cover for 15 A 3 pin flush type non inter locking wall socket with 15A flush type switch with painting suitable colour with continuous earth wire connection of 4 sq.mm copper wire for open PVC plug point. The wiring should be Finolex or its equivalent make and switch box should be Legrand/MK/Schneider make with ISI mark including cost of all materials such as cables, pipes, etc., complete as directed by the Engineer in charge.
Supply and fixing of 20W 4 Feet LED Fitting of Higher end (Philips/ Havells or equivalent make) as approved by the engineer incharge at site with MS round blocks on wall or ceiling with PVC unsheathed copper lead from terminals to the fittings including cost of all materials such as cables, pipes, etc., complete as directed by the Engineer in charge.
Supplying and fixing of 1200mm (48”) sweap BLDC ceiling fan with 300mm down rod with appd best quality make of standard specification with electronic regulators and switch including cost of all materials, labour, fixing, charges as per standard specification etc., complete
Supplying and fixing of 30W LED street light fitting with LED with 25mm dia GI pipe (class B) with 1 no. 25mm GI bend complete on the existing post / on wall with PVC unsheathed copper leads with MSclamp with painting including cost of all materials, lead, lift, fixing charges etc., complete. ( Philips/Crompton make )
Supplying and fixing of 8 way single pole and neutral MCB sheet steel enclosure Distribution board with Double door ( Metal) 1 No. 32 Amps DP MCB as incoming and 6 Nos. 6 Amps to 32 Amps SPMCB outgoing in flush with wall and making good of the concealed portion with earth connection only. The MCB DB and MCB's should be with ISI mark (Legrand /(L&T) make including cost of all materials such as cables, pipes, etc., complete as directed by the Engineer in charge.
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.61 MB
BOQ_772510.xls
BOQ • 0.29 MB
Download all tender documents and submit your bid